1935 error PSE 11 on Windows 7 64bit

Cannot install PSE 11 on new computer. Windows 7 64-bit. I have the license.

Hi cavalierking,
Please follow the steps mentioned in the kb: http://helpx.adobe.com/creative-suite/kb/error-1935-assembly-component-microsoft.html .
Regards,
Romit Sinha

Similar Messages

Windows 64Bit Itunes Error : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR."

I have a brand new HP laptop windows 64bit that is having issues installing Itunes 10.6.3. Whenever attempting to install, I get the error message : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR." I thought this was an issue with the new version, and attempted to retrieve/install older versions of Itunes and same issue occurs. I have tried other forums and resolution tips from : https://discussions.apple.com/docs/DOC-3551 and nothing still. It appears that apple installs bonjour and nothing else. I have tried extracting the itunes package and installing the executables seperately, but everytime the error stil arises. I cannot repair the apple software update as it cannot install from the error mentioned above. Looking through the logs, it shows error : 1721, problem with windows installer package.Does anyone have any suggestions on what to try?

There are so many different error and problems peopl are having.
This is a link to mine
https://discussions.apple.com/thread/3467825
I think it has to be something on Apples end.
Hopefully they fix it soon. Ive used a few GB redownloading and Im going crazy
hope this settles you a bit

1935 error when installing Adobe Acrobat Xl trial version

Has anyone experience an error message 1935; with an extension of 76C3F0F6-989D-35DA-81C6-CA8A88CC93CA) HRESULT0x800703F9, do not know what it trying to say nor how to deal with this. I have not been able to download the trail version. HELP!!!!!!!

Hi felicitav,
I'm sorry you're having trouble downloading the Acrobat XI trial. The error you're encountering is discussed in this Help document: Error 1935 | Install | Acrobat, Reader | Windows
If you're still having trouble after following the steps in that document, let us know.
Best,
Sara

Oracle 11G Express Windows 64bit Version

I've seen the thread that states that a Windows 64bit 11G Express version is planned. Can someone at Oracle please provide an update as to when it will be available? Thanks

Hi ,
There is a known issue with Dbcontrol when try accessing the URL via Internet Explorer
Can you check by accessing the Dbcontrol URL via a different browser like Firefox or Chrome
Ref
Log in to Enterprise Manager Console using Internet Explorer 7 and higher fails with "Internet Explorer cannot display this page" or with Security Certificate Error (Doc ID 1498203.1)
If still an issue then check the status of Dbcontrol to ensure its working fine
SET ORACLE_HOME=<value>
SET ORACLE_SID=ORCL
SET ORACLE_UNQNAME=ORCL
cd %ORACLE_HOME%/bin
emctl stop dbconsole
emctl start dbconsole
emctl status dbconsole
Regards,
Rahul

"Could not complete scan" error when using Windows Fax and Scan

"Could not complete scan" error when using Windows Fax and Scan with a HP OfficeJet Pro 8600 Plus All-In-One network printer.
Printing is fine.
When using the HP Scan application, get the error "Scanner communication cannot be established".
When scanning from the printer itself it fails with the same message. In addition the printer panel displays the error:
"The scan could not be completed due to one or more of the following issues:
Connection to the computer is lost
The scanner is in use
OCR application is not installed"
My PC is a HP Compaq Pro 6300 SFF 64bit, with ethernet cable to the router and ethernet cable to the printer
Originally ran Windows 8.0; recently upgraded to Windows 8.1.
Older separate Netgear router and modem was replaced with a newer Netgear Router/Modem, but both experienced the same problem.
There was no problem with the original Windows 8.0 configuration and only after upgrading to 8.1 did the problem emerge.
On my home netowrk I have an HP ProBook 6550b running Windows 7 sp1 that uses wireless to get to the Router, and it has no problem with scanning.
I have followed the recommendations of a number of articles relating to this issue (including: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02915410&product=4323659#N94), but there has been no change in behaviour.
The printer has a static IP address;
Power settings have been adjusted to Never for Turn off Hard Disk; Sleep and Hybrid Sleep.
Scanning has been tested with all firewalls and antivirus turned off and in Selective Startup.
The printer has been plugged directly into the power socket.
With all these settings the Windows 8.1 cannot scan while the Windows 7 laptop with wireless to the router has no problems.
Appreciate any insights into this problem.
I can only surmise that the problem is a compatibility problem between the 8600 Printer and Windows 8.1.
Any ideas?
regards,
Motorbike

You can determine if there is compatiblity between the printer and PC by checking the Windows 8.1 hardware compatibility list. I have done that and it is shown to be fully compatible. If the driver you installed before was only the basic driver,it would explain the lack of scan and copy functionality.
Download and install the Windows 8.1 full feature driver and software on the HP Compaq Pro 6300 SFF 64bit PC .
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-4&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Install Oracle Clusterware/RAC Windows x32bit or Windows 64bit ?

Hi,
What is your suggestion to install Oracle Clusterware RAC on Windows.
Why choose Windows 32 bit ?
Why choose Windows 64 bit?
What are the advantages and disadvantages?

Hi,
I definitely recommend 64bit Windows, the principal reason is memory addressing limitation.
In my standpoint do not exist benefits to use Windows 32bit with Oracle Clusterware/RAC.
32-bit processors have address registers that are 32-bits wide (can address up to 4GB physical RAM).
You can to use a workaround by enabling the addressing of more than 4GBytes using parameters in Windows (AWE/PAE). But if I want to use more than 4Gbytes, I'll go to Windows 64bit.
The 4GB addressable space per process is divided into system and user space. By default, the system space is 2GB and the private user space is 2GB. Each user process shares the same 2GB System address space.
The services of the Clusterware, ASM and Listener will consume at least 1Gbyte of memory initially.
If you create an instance to to use 1Gbytes and you have 50 connections you will have problems with connections to the database raising the following error.
TNS-00510: Internal limit restriction exceeded
32-bit Windows Error: 8: Exec format error
TNS-00507: Connection closed
32-bit Windows Error: 109: Unknown errorReason: Problems of memory usage. i.e. Out of Memory.
Another point:
With Windows 32-bit using Clusterware/RAC 11.1 you can set Automatic Memory Management(AMM) feature (MEMORY_TARGET) but you cannot use if you create 2 Instances on same Host.
Check this note..
*ORA-27102, OSD-00031 Unable To Extend Memory_max_target And Memory_target Past 2GB [ID 842881.1]*
Oracle Solution: Please install the 64-bit OS on 64-bit server, hence there is no memory limitations
I belive that is reason wich Oracle not support Oracle Grid Infrastructure 11.2 on Windows 32-bit. You cannot use ASM 11.2 on Windows 32-bit.
Definitely do not exist reason for me to to use Windows 32bit to support Oracle Clusterware.
There are lot services involved wich require memory and a big limitation of memory on 32-bit.
At present all latest CPUs support 64bit. Then install Oracle Clusterware/RAC x64, even when you are use less than 4GBytes memory, you only have benefits.
Benefits of Use 64-bit are:
64-bit versions of Windows have implemented up to 16 terabytes of virtual address space
64-bit programs use the 16 terabyte tuning model (8TB user / 8TB kernel)
No performance penalties for large memory
Unlimited user connectivity
64-bit Windows versions allow addressing of large physical memory sizes without using PAE
*Windows Memory Configuration: 32-bit and 64-bit [ID 873752.1]*
This document gives a better understanding of my perspective.
http://levipereira.wordpress.com/2011/02/12/comparison-of-32-bit-and-64-bit-oracle-database-performance-on-the-dell-poweredge-6850-server-with-microsoft-windows-server-2003/
Regards,
Levi Pereira

I cant download Adobe Acrobat Pro an error message saying Error 1935 error occurred.

How can i use the program or how can i get a refund?

Hello simonm70410636,
Considering error 1935, I would suggest you to try out the solutions mentioned at the following KB doc link:
Error 1935 | Install | Acrobat, Reader | Windows
Hope this helps.
Regards,
Anubha

Problem installing itunes on windows 64bit

problem installing itunes on windows 64bit, help me!!!

Yes, when I try to install the iTunes software on my notebook, running Windows 7 64-bit, I get a window that says: "There were errors before iTunes could be configured. Error during installation. Computer was not changed. "thanks

Font Capture: PhotoshopServer.exe - Application Error (PSE 10) Any suggestions?

Font Capture: PhotoshopServer.exe - Application Error (PSE 10) Any suggestions?

First, go to Windows Update and select the Custom option so that you can install ALL of the latest updates -- including the non-critical ones. This will ensure you also have important updated drivers and software updates.
Then, for good measure, I recommend running Advanced System Care Free on your system to give it a good tune-up. An XP computer is between 5 and 12 years old, and that's a lot of time to gather up a lot of junk and temp files.
http://www.iobit.com/advancedsystemcareper.html
And of course ensure you have the latest version of Quicktime from Apple.com, per the program's requirements. And then go to the Help menu of any Adobe product and Check for Updates.
Then reboot.
If that doesn't fix it, it sounds like you may have a corrupted font. But that may take some troubleshooting to determine.

Error in installing windows 2008 r2 sp 1 element not found

error in installing windows 2008 r2 sp 1 element not found

Hi,
As Akash G says, would you please let us know the complete error message or provide a screenshot? It will help
us to go further.
In addition, would you please let me confirm whether install the Windows Server 2008 R2 Service Pack 1 via
Windows Update, or download the installation package and then install manually?
Please refer to the following article and check if can help you to solve this issue.
The error 0X80070490(Element not found) when you are installing a service pack or update
http://blogs.technet.com/b/asiasupp/archive/2011/06/20/the-error-0x80070490-element-not-found-when-you-are-installing-a-service-pack-or-update.aspx
By the way, you can also install the Service Pack 1 in
Clean Boot mode manually. Then please check if install successfully.
Hope this helps.
Best regards,
Justin Gu

When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes. Not a fix. Help?

When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes. Not a fix. Help?

after perusing other subjects with playback issues:
this is the fix:
-Launch Control Panel - Double click Quicktime, If you do not see quicktime, look on the top left side of control panel and switch to classic view. This will then allow you to see Quicktime.
-Now click the advanced tab and click on Safe Mode GDI Only, Apply, then ok.

Error while updating window 8.1

error code 8024402c windows update ran into a problem.

Hi,
Could you please have a share with the full error messages here?
We may first take use of Windows Update Automated Troubleshooter.
Fix Microsoft Windows Update Issues
For the other steps, please take a check into the above article.
Best regards
Michael Shao
TechNet Community Support

Error while using window.open() in JSP page

I am getting error while using window.open() in my JSP page.
This is code in my JSP page,
<h:commandLink onclick="loadContextSensitiveHelp(#{setNewDayStatusBean. cycleStatusViewObject.helpUrl});" value="Help">
function loadContextSensitiveHelp(helpPageName) {
top.consoleRef=window.open('#{facesContext.externalContext.requestContextPath}/main/patient/helpPageName','myconsole',
'width=350,height=250'
+',menubar=0'
+',toolbar=0'
+',status=0'
+',scrollbars=1'
+',resizable=0')
top.consoleRef.document.close()
I am getting the following error in my browser,
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: /SetNewDayStatus.jsp(69,34) #{..} is not allowed in template text
     org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:40)
     org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:407)
     org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:102)
     org.apache.jasper.compiler.Validator$ValidateVisitor.visit(Validator.java:711)
     org.apache.jasper.compiler.Node$ELExpression.accept(Node.java:935)
     org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
     org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2386)
     org.apache.jasper.compiler.Validator$ValidateVisitor.visit(Validator.java:838)
     org.apache.jasper.compiler.Node$CustomTag.accept(Node.java:1507)
     org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
     org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2386)
     org.apache.jasper.compiler.Node$Visitor.visit(Node.java:2392)
     org.apache.jasper.compiler.Node$Root.accept(Node.java:489)
     org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
     org.apache.jasper.compiler.Validator.validate(Validator.java:1737)
     org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:178)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:306)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:273)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:566)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:317)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:428)
     com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:444)
     com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:116)
     com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:106)
     com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:251)
     com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:144)
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
note The full stack trace of the root cause is available in the Apache Tomcat/6.0.13 logs.
Anyone help me to solve this issue. Thanks............................

I am getting error while using window.open() in my JSP page.
This is code in my JSP page,
<h:commandLink onclick="loadContextSensitiveHelp(#{setNewDayStatusBean. cycleStatusViewObject.helpUrl});" value="Help">
function loadContextSensitiveHelp(helpPageName) {
top.consoleRef=window.open('#{facesContext.externalContext.requestContextPath}/main/patient/helpPageName','myconsole',
'width=350,height=250'
+',menubar=0'
+',toolbar=0'
+',status=0'
+',scrollbars=1'
+',resizable=0')
top.consoleRef.document.close()
I am getting the following error in my browser,
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: /SetNewDayStatus.jsp(69,34) #{..} is not allowed in template text
     org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:40)
     org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:407)
     org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:102)
     org.apache.jasper.compiler.Validator$ValidateVisitor.visit(Validator.java:711)
     org.apache.jasper.compiler.Node$ELExpression.accept(Node.java:935)
     org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
     org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2386)
     org.apache.jasper.compiler.Validator$ValidateVisitor.visit(Validator.java:838)
     org.apache.jasper.compiler.Node$CustomTag.accept(Node.java:1507)
     org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
     org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2386)
     org.apache.jasper.compiler.Node$Visitor.visit(Node.java:2392)
     org.apache.jasper.compiler.Node$Root.accept(Node.java:489)
     org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
     org.apache.jasper.compiler.Validator.validate(Validator.java:1737)
     org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:178)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:306)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:273)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:566)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:317)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:428)
     com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:444)
     com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:116)
     com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:106)
     com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:251)
     com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:144)
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
note The full stack trace of the root cause is available in the Apache Tomcat/6.0.13 logs.
Anyone help me to solve this issue. Thanks............................

ITunes update error 7 (windows error 1114) on Windows Vista Home Premium SP2

I have been trying to update iTunes for the past month. I admit that I had not been keeping up with the updates for about a year but now that I want to update it, I am getting an error.
Computer: hp Pavilion dv6700 Notebook PC, Intel Core2 CPU T8100 at 2.10 GHz
OS: Windows Vista Home Premium, Service Pack 2
iTunes update error 7 (Windows error 1114)
error message from Windows:
Runtime Error!
Program: C:\Program Files\iTunes\iTunes.exe
R6034 Application has made an attempt to load the C Runtime Library incorrectly. Please contact applications support (that is Apples iTunes) team for information.
I am also getting C Runtime Library error message about once a day since I tried to update iTunes.
What do I do?

See Troubleshooting issues with iTunes for Windows updates.
tt2

Urgent help needed on writing errors in to windows events application logs

Hi all,
we have web based application. Whenever there is critical errors encounters in our application we need to write that errors in to windows
event viewer, application logs. Please help me on how to do this.
do we have any specific API for this ?
thanks in advance
Shivakumar

You should use WinAPI to do so. Asking in JNI forum (or specialized WinAPI forum) for more details is good idea I think.

1935 error PSE 11 on Windows 7 64bit

Similar Messages

Maybe you are looking for