/1CN/CRMSAP_PART ddic error while client copy

Hell Gurus
I am doing local client copy.
My source client is 000 and target is 210.
But in between it is giving ddic error for table /1CN/CRMSAP_PART
But copy is still going on.
Please suggest what went wrong.
Regards
Yogesh

Hi,
most likely, everything went fine ))
If you do have problems in special tables, client copy mentions this and reports it as in your case ...
=> This table did not get copied !
First questions: Do you have rows in this table ? If not, you are fine ?
Second: Do a DDIC check in SE11 and you most likely will find the root cause ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

Similar Messages

  • Error while Client Copy

    Hello,
    We are receiving continuous dumps while performing post-processing activities of  remote client-copy.
    Error details:
    Runtime Error          SAPSQL_ARRAY_INSERT_DUPREC
    Except.                   CX_SY_OPEN_SQL_DB
    The termination occurred in the ABAP program "SAPFSSO6" in "SOFD_INSARR".
    The main program was "RSSOUSCO_FOR_CC ".

    Hello,
    If your platform is Windows so please add /3GB & /PAE parameter in boot.ini file.
    Thanks & Regards,
    Charanjit Singh.

  • WBSE Layout Detail Screens - Error while Client Copy

    Hi
    I have 4 Project Profiles like P1,P2,P3,P4.
    I customized the WBSE Layout Details with 05 TABs for P1.
    I included them in a TR & tried to make a client copy.
    End result in the Target client is 09 TABS for P4 profile (actual intention is 05 TABS for P1 Profile as mentioned above)
    This is very strange & I am not able to trace from where system picked up ... 
    1. Entirely different Project Profile
    2. How 9 TABs have come instead of 5 TABs
    Still,
    Source Client shows entries for 5 TABs for P1 Profile
    Target Client shows entries for 9 TABs for P4 Profile.
    regards

    Hi Rafi,
    TR is created following the automatic TR prompt while configuring only (similar to other standard configs).
    I didnot know the point that "TR created from IMG for WBSE Detail Screens will not work".
    But I made out the differences in "TCSCR" table entries (got this table from TR details) in the Source & Target clients.
    There is a key number field "0002" which is the reason for mismatch in table "TCSCR" in both the clients.
    I searched the help but did not get any value add.
    What can be the solution now?
    regards

  • Error while Client copy request - Report Painter

    Hi friends,
    I am copying a Workbench request from customization client to test client through SCC1. This relates to Report painter report transport for FDI1. However, I am getting the following warning message while transport -
    "Program ended with error or warning, return code: 4"
    As per my understanding, the above message is a warning message. However, I would like to check if any of you have come across this message? Is this a normal warning message without any negetive system impact?
    Request your guidance for the same.
    Thanks in advance
    Hrishi

    Hi Suma,
    Thanks a lot for the response.
    Yes it is a Workbench request. And I am adding the new report to the SAP Standard report menu under Line Item Analysis.
    Also, some COPA tables are getting updated in the background. Is this normal? Are the standard report painter tables related to COPA tables in any manner?
    Thanks in advance.
    Hrishi

  • Error while System copy in Sapinist

    Hi All,
    i found an error while system copy ABAP + Java in SAPinist
    Error is
    CJS-00030  Assertion failed: in function (nothrow)
    {    NW.trace("NW.hasABAP(", nothrow, ")");    if (_hasABAP == undefined && !nothrow)
    {        ASSERT(arguments.callee, false, "NW(" + this.getSID() + ").hasABAP() is undefined");    }   
    NW.trace("NW.hasABAP() done: ", _hasABAP);    return _hasABAP;}NW(SAPID).hasABAP() is undefined
    ERROR 2010-09-24 10:52:45
    MUT-03025  Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2010-09-24 10:52:45
    FCO-00011  The step setLoadType with step key |NW_Prepare_Export|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|2|0|
    NW_getDBInfo|ind|ind|ind|ind|4|0|
    NW_getLoadType|ind|ind|ind|ind|0|0|setLoadType was executed with status ERROR .
    any body have solution
    gagandeep

    Hi,
    Please make sure the hostname is not beginning with digit?
    We found similar problem reported by other customers that the error occurs if hostname begginning with digit.
    For details, please refer to note  611361.
    If it is difficult for you to change hostname,  please stop sapinst and modify the control.xml in your
    installation directory:
    search for the string  pfdir.getChildNodes  and repleace the
    line
    for (var it =
    pfdir.getChildNodes(/^START_[A-Z0-9]+_[a-zA-z][a-zA-Z0-9-]*$/);
    !it.isDone(); it.next()) {
    with the line:
    for (var it = pfdir.getChildNodes(/^START_[A-Z0-9]+_[a-zA-Z0-9-]*$/);
    !it.isDone(); it.next()) {
    It is not sufficient to just restart SAPinst in order to fix the problem.
    You have to restart the installation from scratch with the modified control.xml.
    You can restart the installer from DVD, choose the installation service
    on the first screen, and when the next screen appears, interrupt the
    installer. Then patch the control.xml in the installation directory and
    restart the installer.
    Best Regards
    Julia

  • Error in client copy - EFG_FORM_CC_EXIT_AFTER

    Hi,
    I am getting the following error while doing client copy,
    it has copied all the tables , but at the end it gives message,
    ===============================================
    Target Client           500
    Source Client           000
    Copy Type               Local Copy
    Profile                 SAP_CUST
    Status                  Successfully Completed
    User                    SAP*
    Start on                26.09.2007 / 01:48:17
    Last Entry on           26.09.2007 / 02:56:00
    Statistics for this Run
    - No. of Tables             53644 of     53644
    - Deleted Lines                 2
    - Copied Lines            5090006
    arnings and Errors
    Table Name              Component  Package
    EFG_FORM_CC_EXIT_AFTER  CA-GTF-PWB Program Exit has Syntax Errors
    EFG_FORM_CC_EXIT_BEFORE CA-GTF-PWB Program Exit has Syntax Errors
    ============================================================
    please advice.
    regards,
    SM

    Hi Shark,
    Your client copy seems to be ended with just warnings. As mentioned, please correct those 2 forms in the source system and try to import to target client. Discuss with apps member whether they need these 2 mentioned forms. If they don`t need it ,you can ignore the warnings.
    Perform post processing after client copy.
    regards,
    Vinodh.

  • Application Exit Error during client copy

    Hi ,
    I have an ECC 6 system with DB2 database.I get an application Exit error while doing a client copy from 000 to 901.I could see all the tables where copied but the error comes in post processing stage.
    Application exit error
    function module :FIN_TR_CC_EXIT
    package :FINB_TRANSPORT_TOOL
    Program ended abnormally
    I tried to delete the client and recreate it again.But still it gave the same error.I tried deleting the client gain.But the deletion job cancels .
    Plz help me

    HI
    Can you attach client copy log for analysis.
    Regards
    Rajan Arora

  • ALSB 3.0 error while Assign-copy proxy req 2 business req in transformation

    Hi,
    I'm getting the following error while i'm mapping proxy service request to business service request in split-join using 'assign,copy'
    @compile time it's showing this warning.
    Warning: [Assign, Copy] Element {http://www.abcd.com}objGetStateLstTyp not allowed on schema type E=getStateProvinceList|D=getStateProvinceList@http://www.abcd.com/test for From.
    Hence causing the following error @runtime.
    The invocation resulted in an error: [selectionFailure] Expression 'Variable getStateProvinceListRequest.parameters, nested expression ns1:objGetStateLstTyp/ns1:businessLine' returned 0 items when exactly 1 is required..
    Please help.
    Edited by ganeshgadi at 05/29/2008 10:20 PM

    Hi , I am facing the same issue.
    were you able to resolve it.
    please let me know if you were.
    Many Thanks.

  • Error during client copy in GRC 10.0 -Application exit

    Hello Experts,
    After installing GRC 10.0,as post installation activity ,
    we are doing client copy (accordence with the sap note 1505255).
    but we are getting  'Application Exit Error' when executing method FDT_BEFORE_EXPORT_C:
    any help would be appreciated.
    regards,
    vinay singh

    HI
    Can you attach client copy log for analysis.
    Regards
    Rajan Arora

  • Error while system copy export

    Dear all,
    While system copy in export  part we are getting following error.  Sorry for not able to paste in proper format.
    OS :-HPUX 11.23
    Database :- oracle 10g
    Execution of the command "/opt/java1.4/bin/java -classpath /tmp/sapinst_exe.27996.1263558176/JAR/ins-j2ee.jar:/tmp/sapinst_exe.27996.1263558176/JAR/sapxmltoolkit.jar -d64 com.sap.ins.j2ee.TestClassLoader" finished with return code 0. Output: CORRECT
    INFO 2010-01-15 17:54:25
    Found a valid JAVA_HOME directory /opt/java1.4 with JDK version 1.4.2_15.
    INFO 2010-01-15 17:54:25
    Execute step fillContext of component |NW_Prepare_Export|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|2|0.
    INFO 2010-01-15 17:54:26
    Execute step collect of component |NW_Prepare_Export|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|2|0|NW_readProfileDir|ind|ind|ind|ind|0|0.
    INFO 2010-01-15 17:54:26
    Execute step getMounts of component |NW_Prepare_Export|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|2|0|NW_readProfileDir|ind|ind|ind|ind|0|0.
    INFO 2010-01-15 17:54:26
    Execute step updateMountInfo of component |NW_Prepare_Export|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|2|0|NW_readProfileDir|ind|ind|ind|ind|0|0.
    INFO 2010-01-15 17:54:26
    Execute step getProfileDir of component |NW_Prepare_Export|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|2|0|NW_readProfileDir|ind|ind|ind|ind|0|0.
    INFO 2010-01-15 17:54:52
    Account d02adm already exists.
    INFO 2010-01-15 17:54:52
    Account 0 already exists.
    INFO 2010-01-15 17:54:52
    Account 106 already exists.
    INFO 2010-01-15 17:54:56
    Account sapsys already exists.
    INFO 2010-01-15 17:54:56
    Account d02adm already exists.
    INFO 2010-01-15 17:55:00
    Execute step fillContext2 of component |NW_Prepare_Export|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|2|0.
    INFO 2010-01-15 17:55:03
    Execute step isUnicodeFromStack of component |NW_Prepare_Export|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|2|0|NW_getUnicode|ind|ind|ind|ind|1|0.
    INFO 2010-01-15 17:55:03
    Execute step isUnicodeFromExecutables of component |NW_Prepare_Export|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|2|0|NW_getUnicode|ind|ind|ind|ind|1|0.
    INFO 2010-01-15 17:55:05
    Account d02adm already exists.
    INFO 2010-01-15 17:55:05
    Account 0 already exists.
    INFO 2010-01-15 17:55:05
    Account 106 already exists.
    INFO 2010-01-15 17:55:06
    Creating file /tmp/sapinst_instdir/ERP/LM/COPY/ORA/EXP/CENTRAL/AS-ABAP/PREEXP/disp+work.log.
    INFO 2010-01-15 17:55:06
    Output of /usr/sap/D02/DVEBMGS00/exe/dispwork -v is written to the logfile dispwork.log.
    INFO 2010-01-15 17:55:10
    Execution of the command "/usr/sap/D02/DVEBMGS00/exe/disp+work -v" finished with return code 0. Output:
    INFO 2010-01-15 17:55:10
    Execute step isUnicodeFromMsgServer of component |NW_Prepare_Export|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|2|0|NW_getUnicode|ind|ind|ind|ind|1|0.
    INFO 2010-01-15 17:55:10
    Execute step isUnicodeFromProfile of component |NW_Prepare_Export|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|2|0|NW_getUnicode|ind|ind|ind|ind|1|0.
    INFO 2010-01-15 17:55:11
    Execute step askUnicode of component |NW_Prepare_Export|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|2|0|NW_getUnicode|ind|ind|ind|ind|1|0.
    INFO 2010-01-15 17:55:11
    Execute step fillContext of component |NW_Prepare_Export|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|2|0|NW_GetUserParameter|ind|ind|ind|ind|3|0.
    INFO 2010-01-15 17:55:11
    Execute step setDefaults of component |NW_Prepare_Export|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|2|0|NW_GetUserParameter|ind|ind|ind|ind|3|0|NW_GetUserParameterUnix|ind|ind|ind|ind|2|0.
    INFO 2010-01-15 17:55:12
    Execute step askSidAdm of component |NW_Prepare_Export|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|2|0|NW_GetUserParameter|ind|ind|ind|ind|3|0|NW_GetUserParameterUnix|ind|ind|ind|ind|2|0.
    INFO 2010-01-15 17:55:12
    Execute step dbInfo of component |NW_Prepare_Export|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|2|0.
    INFO 2010-01-15 17:55:12
    Execute step fillContext of component |NW_Prepare_Export|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|2|0|NW_getDBInfo|ind|ind|ind|ind|4|0.
    ERROR 2010-01-15 17:55:12
    CJS-00030  Assertion failed: in component: NW_getDBInfo step:fillContextat this point the dbtype has to be != ind
    ERROR 2010-01-15 17:55:12
    MUT-03025  Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2010-01-15 17:55:12
    FCO-00011  The step fillContext with step key |NW_Prepare_Export|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|2|0|NW_getDBInfo|ind|ind|ind|ind|4|0|fillContext was executed with status ERROR .

    > We resolved issue by setting oracle_home  environment.Now we get screen asking export location.While exporting we get error  BR0804I BRCONNECT terminated with errors.
    Nice - but how should we now find out what you problem is? We have no magic ball to look into..
    > We are doing Hetrogenous system copy.
    Be aware that you need a certified migration consultant on-site for a heterogeneous copy. Otherwise you'll loose support for problems during the migration and for the target system (http://service.sap.com/osdbmigration --> FAQ).
    Markus

  • RFC Error while client export

    Hi Guys,
    While Client export with any profile Background work process stop reason is RFC. system in single system landscape. I want export client profile through SCC8 only. please solve my problem
    Regards
    Ganesh

    Hello Ganesh,
    I had received the same kind of error once, we applied the following workaround
    Execute the client export in foreground. The client export at SAP level won't take much time and would get completed quickly.
    BUT yes, this does NOT mean that the Co-files & Datafiles are generated quickly.
    You will notice, that the file size & timestamp of cofile & datafile being updated. Once the timestap of the co-files & datafile stops you can be sure that the client export has completed.
    Incase you still want to find the RCA  of your problem, please send us the export log details.
    Regards,
    Ammey Kesarkar

  • Error in Client Copy--Work process restarted

    when i am doing a Client copy of the SAP_CUST profile
    i am getting the following error.
    <b>"work process restarted"</b>
    Pls help

    Hi,
    Run it again, but run in background.
    Thanks, then keep looking at scc3.
    thanks,

  • Error while Client installtion on AIX 6

    I am getting below error while installing orale client 10.2.0.1 on AIX 6.1
    If anyone faced same issue , Please guide on this
    $ ./runInstaller
    Your platform requires the root user to perform certain pre-installation
    OS preparation. The root user should run the shell script 'rootpre.sh' be
    fore
    you proceed with Oracle installation. rootpre.sh can be found at the top
    level
    of the CD or the stage area.
    Answer 'y' if root has run 'rootpre.sh' so you can proceed with Oracle
    installation.
    Answer 'n' to abort installation and then ask root to run 'rootpre.sh'.
    Has 'rootpre.sh' been run by root? [y/n] (n)
    y
    Error in GetCurrentDir(): 13
    Error in GetCurrentDir(): 13
    Error in GetCurrentDir(): 13
    Starting Oracle Universal Installer...
    No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
    Edited by: user8914814 on Jun 20, 2011 11:54 AM

    Hi;
    Please see:
    While Installing Oracle software facing "Error in GetCurrentDir(): 13" [ID 378393.1]
    Error Running ./runInstaller: Error In Getcurrentdir(): 13 [ID 563296.1]
    Also see:
    Unable To Install Oracle Patch 9.2.0.5.0 On Aix 5.2 [ID 281548.1]
    Regard
    Helios

  • Data Load Error after Client copy on Source System

    We did a client copy to our QAS source system.  After that was complete, I tried to do a couple of full data loads.  But they fail.  The only errors I see are on the source system when I try to manual update the Idocs.  They are:
    EDI: Partner Profile not available
    Entry in inbound table not found
    Is there a step I need to take after the client copy and before the loads?  I have a feeling that I'm forgeting something.
    Thanks,
    Chris

    Hi Chris,
    Check the following.
    1> Go to WE20 check whether you are able to see two logical system in "Partner Type LS" one for Source and one for Myself.
    2> If you say Yes for <1> then check in both the logical system, in the classification tab, partner status should be 'active'.
    3> Check you have used REMOTE USER in main and in Outbound and inbound Parameters "Post Processing Permitted tab " for each Message type.
    4> go to out bound message type and check the "Receiver port" pointing to correct RFC destination for both ( Source and Myself logical system).
    If your answer is no for <1> then perform all the steps.
    Hope this will help you.
    Suneel

  • AFAB: Runtime Error after client copy.

    Hi all,
    I'm having a problem with the transaction code AFAB (post client copy). After client copy from PRD to DEV, I'm encountering this runtime error "SAPSQL_ARRAY_INSERT_DUPREC -   The ABAP/4 Open SQL array insert results in duplicate database records." whenever I tried to perform AFAB. Test run was executed successfully but I cannot complete the actual background processing.
    I have try with other asset (in the same client) and encounter the same problem. Likewise, I have successfully completed the depre. if I try the same and other asset (in a different client on the same server).
    I've check the number range in FBN1 and have verified that the range is correct.
    Any advice as to how I can solve this problem?
    Thank you.
    Regards.
    p/s: if there is duplication, how do I find where the duplication is located and how do I remove this duplication?
    p/s 2: the standard SQL that is having this problem is "INSERT COBK  FROM TABLE COBK_INS."
    Edited by: Sek Yao Ooi on Aug 5, 2010 5:21 AM

    Solution obtain from snote-83731 ; thanks to SAP-Marketplace's support.
    Issue solved.

Maybe you are looking for