1G Fiber Module Part Code for SG500X

Hello,
We Need SG500X Switch for its VRRP Features. and also, We do have 1G Fiber on Network. So, which fiber module can i choose for SG500X switch.
It do have 4x 10GE SFP+ Ports.
Can i choose MGBLX1 for SG500X for 1 gigabit fiber connectivity?
Thanks
Sandeep

Hi Sandeep,
You left the fiber description out of your request, so i thought i better ask a qualifying question, so you order the appropriate SFP.
MGBLX1 is a SFP designed for running over single mode (SM) fiber.
MGBSX1 is a SPF designed for running over multimode (MM) fiber
The fiber you have onsite may have writing on the side that says, 50um or 62.um or may be orange. This cable is multimode cable
if the fiber is MM, 50um thick then you may have a range of no more than 500 meters with a p/n MGBSX1
if the fiber is 62.5um thick then you may have a range of around 220 meters with a p/n MGBSX1
The fiber may have writing on the side that says 9um, or may be yellow - This is singlemode cable
regards Dave

Similar Messages

Part codes for any Cisco part

Hi,
Any one knows in single file/url where we can check Part codes for any Cisco part.
I need mostly for SPFs modules.
Thanks
Venkat

http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL632702.html
http://www.cisco.com/en/US/docs/routers/7200/install_and_upgrade/gbic_sfp_modules_install/5067g.html
http://www.cisco.com/en/US/prod/collateral/modules/ps5455/ps6578/product_data_sheet0900aecd801f931c_ps5000_Products_Data_Sheet.html
http://www.cisco.com/en/US/prod/collateral/modules/ps5455/ps6576/product_data_sheet0900aecd80582763.html
http://www.cisco.com/en/US/prod/collateral/modules/ps5455/ps6577/product_data_sheet0900aecd8033f885.html
http://www.cisco.com/en/US/prod/collateral/modules/ps5455/data_sheet_c78-455693.html

Bluetooth module part number for pavilion dv7 4080us ?

I have a pavilion dv7 4080us. Its a great machine but am surprised not to find bluetooth. I see other machines have it and assume it is a part. I have installed bluetooth modules in other laptops pretty easily - but I cannot find a part number for this machine to order etc.

Hi:
Below is the service manual for your notebook.
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02476547/c02476547.pdf
You will need to order both the bluetooth module and the bluetooth cable. Part numbers for these are on page 21 of Chapter 3.
The installation procedure is in Chapter 4, page 82. Part numbers again listed on page 82. Looks like you have to take a lot of stuff off including the display.
Paul

Cisco 7925G Wireless Part code for US?

Hi,
What part code should be used for US, Is it CP-7925G-A-K9= or CP-7925G-W-K9=?
Are there any regulatories or compatibility issues around this?
Thanks,
Nirmal

Hi Nirmal,
CP-7925G-W-K9 is what I have used with my partner when ordering 7925's. The W is for "rest of world" and the A is for "FCC" which from my understanding complies with the American Federal Communications Comission.
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps379/ps9900/data_sheet_c78-504890.html
Hope this helps.
Thanks,
Tony
Please rate helpful posts!

FC-2GB module part number for cisco 4503 switch

Dear Sir,
We hv a SAN switch MDS-9216 with FC-2GB ports.
We want to connect the SAN switch to our newly installed cisco 4503 switch which modules is required in the cisco 4503 switch to connect the SAN switch FC-2GB ports.
Regards
Deepak

Deepak,
Can you explain why you want to do this?
The Catalyst 4503 is an ethernet switch and does not support FC-2G interfaces. If you want to enable IP access to your storage, you would need an IP storage services module in your MDS 9216. This would then provide GE interfaces which you could connect to your Catalyst 4503. You could then provide IP-based hosts access to FC-connected storage using iSCSI for instance.
Regards
Rob.

NI9203 - Need to know how to set up the FPGA code for multiple NI9203 modules and how to calibrate the data

Hi. I'm using the NI9203 module to detect pressure, temerature and flow rate of water in a cooling system. I have 17 different inputs coming in therefore i'm using 3 NI9203 modules. I've used the example provided with labview as a base for designing my code. The example can be found here : Program Files\National Instruments\LabVIEW 8.0\examples\CompactRIO\Module Specific\NI 9203.
I've had no problems when testing this code out for a single NI9203 module but when i add code for 3 modules the code will not compile as my resources are over mapped. Is there a simpler way to program the FPGA code.
That said how do you go about calibrating the data that's received from the module. Preferably i'd like to write a vi to do the calibrating. Just need help on how to go about writing this vi

Hi havok,
Firstly, I would use constants to configure the modules, it'll save some resources on the FPGA. I'm not typically changing the settings on the fly, so using constants whenever possible helps. I would also take a look at the following KnowledgeBase article on other changes you can make to the FPGA VI to compile the code:
http://digital.ni.com/public.nsf/allkb/311C18E2D635FA338625714700664816?OpenDocument
The best changes you can make are to use fewer arrays and front panel elements. This can be done by using a DMA FIFO or constants on the block diagram.
Now actually calibrating the data will require you to do it on the host side. There is an example VI called Binary to Nominal that changes the raw data to something more useful for datalogging, display, etc. It can be found in some of the example VIs, or in the following link:
http://digital.ni.com/public.nsf/allkb/E86D8D460C4C092F8625752F00050A61?OpenDocument

Satellite Pro P100: What is the Toshiba part number for a 2GB memory module

Unable to find any way of emailing this question so I have posted it on the forum. Sure this info should be more readily available without having to ask.
What is the Toshiba part number for a 2GB memory module for a PSPA4E-00F007. That's for a Satellite Pro P100 T2400
http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&BV_UseBVCook ie=yes&PRODUCT_ID=115421
Crucial Memory gives me this module - is that correct?
http://www.crucial.com/uk/store/mpartspecs.aspx?mtbpoid=A332E10BA5CA7304
Found this via Kingstons site - is this also correct?
http://www.dabs.com/productview.aspx?QuickLinx=4P3V
Would really appreciate some official clarification here.
Many Thanks

It must be PA3513U-1M2G. You must check if this module is compatible with your notebook model. I think so.
Anyway I recommend you to buy high quality product like Kingston modules.

Java code for calling xslt mapping in module?

Hi,
We have 2 mapping(xslt) in IR
source->cannonical and cannonical->target
we want to remove source->cannonical mapping and want to put that in MODULE of communication channel.
My problem is how to call xslt mapping using java code and we done value mapping their. Did that vallumapping will work in module..
waiting for responce..its an urgent task..
thanq
krishna

You can use the MessageTransformBean to run the XSLT in the adapter framework:
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3823 [original link is broken] [original link is broken] [original link is broken]
I do not know, if the value mapping works here. Maybe you just give a try.
Regards
Stefan

[svn] 4634: First part of glue code for allowing Halo components to use the new Text Layout Framework , in order to get functionality such as bidirectional text.

Revision: 4634
Author:   [email protected]
Date:     2009-01-22 17:38:56 -0800 (Thu, 22 Jan 2009)
Log Message:
First part of glue code for allowing Halo components to use the new Text Layout Framework, in order to get functionality such as bidirectional text.
Background:
TLF is making this possible by implementing a TLFTextField class. It is a Sprite that uses TLF to implement the same properties and methods as the legacy TextField class in the Player. Thanks to the createInFontContext() bottleneck method in UIComponent, it can be used by a properly-written Halo component (such as those in Flex 3) without any modifications to the component.
Note: Text should render similarly -- but is unlikely to render identically -- when a component uses TLFTextField vs. TextField. The width and height may be different, affecting layout; text could wrap differently; etc. This is a fact-of-life based on the fact that TLF/FTE and TextField are completely different text engines.
Whether a Halo component uses TLF or not to render text will be determined in Flex 4 by a new style, textFieldClass. (Gumbo components always use TLF.)
TLFTextField is currently only partially implemented. It does not yet support scrolling, selection, editing, multiple formats, or htmlText. Therefore it can only be used for simple display text, such as a Button label.
Details:
The TextStyles.as bucket 'o text styles now includes a non-inheriting textFieldClass style. It can be set to either mx.core.UITextField or mx.core.UITLFTextField. These are the Flex framework's wrapper classes around the lower-level classes flash.text.TextField (in the Player) and its TLF-based workalike, flashx.textLayout.controls.TLFTextField.
The global selector in defaults.css currently sets it to mx.core.UITextField using a ClassReference directive. For the time being, all Halo components will continue to use the "real" TextField.
The new UITLFTextField is a copy of UITextField, except that it extends TLFTextField instead of TextField. This class has been added to FrameworkClasses.as because no classes in framework.swc have a dependency on it. It will get soft-linked into applcations via the textFieldClass style.
The TLFTextField class currently lives in a fourth TLF SWC, textLayout_textField.swc. This SWC has been added to various build scripts. The external-library-path for building framework.swc now includes all four TLF SWCs, because UITLFTextField can't be compiled and linked without them. However, since they are external they aren't linked into framework.swc.
Properly-written Halo UIComponents access their text fields only through the IUITextField interface, and they create text fields like this:
textField = IUITextField(createInFontContext(UITextField));
(The reason for using createInFontContext() is to support embedded fonts that are embedded in a different SWF.)
The createInFontContext() method of UIComponent has been modified to use the textFieldClass style to determine whether to create a UITextField or a UITLFTextField.
With these changes, you can now write code like
to get two Buttons, the first of which uses UITextField (because this is the value of textFieldClass in the global selector) and the second of which uses UITLFTextField. They look very similar, which is good!
Currently, both Buttons are being measured by using an offscreen TextField. A subsequent checkin will make components rendering using UITLFTextField measure themselves using an offscreen TLFTextField so that measurement and rendering are consistent.
QE Notes: None
Doc Notes: None
Bugs: None
Reviewer: Deepa
Modified Paths:
    flex/sdk/trunk/asdoc/build.xml
    flex/sdk/trunk/build.xml
    flex/sdk/trunk/frameworks/projects/framework/build.xml
    flex/sdk/trunk/frameworks/projects/framework/defaults.css
    flex/sdk/trunk/frameworks/projects/framework/src/FrameworkClasses.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponent.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/metadata/TextStyles.as
Added Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UITLFTextField.as

Many of your points are totally legitimate.
This one, however, is not:
…To put it another way, the design of the site seems to be geared much more towards its regular users than those the site is supposedly trying to "help"…
The design and management of the forums for more than five years have driven literally dozens of the most valuable contributors and "regulars" away from the forums—permanently.
The only conclusion a prudent, reasonable person can draw from this state of affairs is that Adobe consciously and deliberately want to kill these forums by attrition—without a the PR hit they would otherwise take if they suddenly just shut them down.

Part Number for Bluetooth 2.0 module

Does anyone have the part number for a Bluetooth 2.0 module for the Mac Pro?
I want to make sure I don't end up with the older version 1.1.
The part number I've been told to use is Model A1115, but one service site says that's a version 1.1 module, while the seller and another site say it is the 2.0 module.
I can't find anything at apple.com which lists the part numbers, though I might know where to look.

Updated information (why can't we edit our posts any more?):
The part number I'm looking at is, well, several numbers on the module:
7C748005XUZ4A
ANATEL:0786-05-1993
003NY05015 0000
Model A1115
FCC ID: BCGA1115
IC: 579C-A1115
Again, I'm trying to figure out what version of Bluetooth this module is.

Code For Delta Extraction Using Function Module

Dear Experts,
I want a sample code for Delta Extraction using Function Module ( If it is customized already working code very helpful ), I have already created Function Module but Full update is happening. If I give delta update again it is retrieving all records. It is very urgent, if you have please send me to the following mail ID.
[email protected]
Best Regards,
SGK.

Dear KJ,
Thank for your response. I saw the code that you sent, you have used some ztables like ZSC_DELTA_IP, ZSC_SAFETY_DELTA, ZSC_SET_EXT_TIME
What are the fields that you have created in these tables , what is use of these tables, can you send the fields that you have used in these tables.
Thanks & Regards,
SGK

Need code for a function module- Urgent

Hi friends,
I have a requirement where I am giving material description as an import parameter in the function module. ( Material description could be a wild search -- say - Mat* ) I want a sub routine in the function module which should get all the materials from the database ( mara or makt..not sure ) for the user entered Material description.
I want this particular code to be written using a sub-routine using formal parameters inside this fm . Could any one send me the code for this.
Thanks in advance,
Vishnu.

Hi Vishvanath,,
Please find the below code.
DATA : BEGIN OF itab OCCURS 0,
       matnr LIKE makt-MATNR,
       MAKTX LIKE makt-MAKTX,
       END OF itab.
DATA : BEGIN OF itab1 OCCURS 0,
       matnr LIKE makt-MATNR,
       MAKTX LIKE makt-MAKTX,
       END OF itab1.
data : a(5) type c value 'TEST'.
perform mat_no using a.
form mat_no using    p_a.
data : lv_temp(4) type c.
select matnr maktx from makt into table itab.
loop at itab.
lv_temp = itab-maktx+0(4).
if lv_temp = p_a.
move itab to itab1.
APPEND ITAB1.
endif.
endloop.
loop at itab1.
write :/ itab1.
endloop.
endform.                    " mat_no
Thanks.
Amjad.

Creating Java code for the function module

Hi Colleagues,
I have a fuction module in ABAP system. Now I want to Generate java code for the FM.
I cam to know that we can achive that using AXIS, By getting the XML file for the fuction module and generate Java
Class file using that XML file.
Can any one tell me how to achive it.
Or any other way to do that?
Please provide you valid suggestions.
Regards,
Sathya

Hi,
You can integrate axis2 in eclipse. I think you have to find the plugin for that.
After that you can let axis generate the jave code (stubs and proxies) for your web service via the wsdl file.
Kind Regards,
Robin

How to search for a string in ALL Function Modules source code

Hello,
I want to search for the string "HELLO" in all FUNCTION MODULES source code(FM, no reports/programs).
Is this possible? How?
Cheers,
Andy

hi,
Execute RPR_ABAP_SOURCE_SCAN to search for a string in the code ... Press where-used-list button on the program which takes to the function group or the function module where it is used ..
Regards,
Santosh

Func- Code for Radio-button in Module-pool Prg.

Hi Friend's.
I have define 2 Radio button
on Module-pool screen.
I am not been able to triger the Radio button in
Pai .
How can i assign the function code for
radio-button in module-pool.
pls can any one help me

Hi,
For radion buttons, what ever the name you will give that name only will hold that value ( Either selected or not ). But this variable should be declared as global variable in main program.
Still if you want to assign function code, you can assign one like other fields on the screen.

1G Fiber Module Part Code for SG500X

Similar Messages

Maybe you are looking for