1mbps with x-box live?

would 1mbps be to slow or just good enough for xbox live? With games like call of duty and sports games? thank you, this is probably a stupid question but any answer would be greatly appreciated.

First of all, it should work, but you will have to port forward your modem (verizon tech support does not support this, but it is easily done, check out portforward.com) the screen shots may be different and you may have to fish around your modem to find the Port Forwarding section, but the number and infromation needed is the same.   that is step 1.    step 2 if step 1 does not resolve the issue, is to contact verizon tech support and request your line be changed from "interleave" to "Fast Channel" this will reqire them escalating the issue to your MCO but the change is very dramatic for gammers.   Dont' forget to give me Kudos.

Similar Messages

  • Can't connect to X-Box live with Air Port Extreme

    I just can't figure out how to connect my X-Box (original/first X-Box) to X-Box Live using my Airport Extreme. I am using an X-Box wireless modem. X-Box live phone help told me I needed to contact Apple and have them "Open three NAT Ports: 1. UDP 88, 2. UDP 3074, and 3. TCP 3074. Then to enable UPNP." WHAT?? Since I do not have Apple Care, they are unwilling to help me. I have tried manually entering the IP address and Subnet into my X-Box, but then the X-Box tells me there is no "Gateway" something or other. And I can't seem to find the "Gateway" on my Mac in Airport settings. Can anyone help?
    -Thanks!

    Acces setup page of router .....
    Please click on the tab "Application and gaming" and click on sub
    tab "Port range forwarding"
    1) On the first line in Application box type in "Xbox", in start box
    type in 88, in end box type in 88, in protocol keep it both, in ip
    address type in 192.168.1.20 and give a check mark on enable box.
    2)   On the second line in Application box type in "Xbox", in start box
    type in 3074, in end box type in 3074, in protocol keep it both, in ip
    address type in 192.168.1.20 and give a check mark on enable box.
    3) Now save the settings
    4) Once you return to the setup page, click on the tab "Administration"
    and disable the UPNP and save the settings.
    5) Now assign the given ip address on your xbox
       ip address :- 192.168.1.20
       subnet mask :- 255.255.255.0
       default gateway :- 192.168.1.1
    Please assign the dns address on the xbox
      primary dns :- 4.2.2.2
      secondary dns :- 192.168.1.1
    6) Please try to test your xbox live.

  • Aspect ratio issues with SD box and no help from Verizon

    I just renewed my  2 year contract which included a free box but a billing screwup resulted in repeated charges for the box. A CS rep credited the account and said I had the wrong box and she would send out a new one. 
    i had a 7100 Motorola HD box. I have an older television set (that cannot control aspect ratio) and I have never had HD service but this was the box I was sent by Verizon as part of my contract. Why they felt it had to be changed I don't know, but ..... the box they sent was a 2500 SD box which does not give me an acceptable picture.
    It's totally random. Some channels are 16:9. Some are overzoomed 4:3. The FIOS channel bar at the bottom is partially off the screen and the content is clipped around the edges. Commercials are totally random in size and appearance.
    The # key on the remote does not work. There is no option in Settings to change the aspect ratio. 
    CS was ZERO help. They concluded that I had to either deal with the scattershot image sizes and clipped image content or go buy another television. SERIOUSLY VERIZON?
    I couldn't get an answer as to why the box I was sent by Verizon as part of my original contract that provided a perfectly acceptable image had to be replaced with a box that doesn't provide squat.  I have had Verizon service for  approximately 7 years with this same television and this is the first time I've been given a box that can't produce an acceptable image and a remote that can't resize. So why now?
    This smells like a bait and switch, or an attempt to get customers to pay for an upgraded box for a service they don't want  just to get an acceptable picture.  I live in an urban area and there is plenty of older equipment in these homes. So are customers like myself just being told even though you pay a significant amount of money for a Triple Play you are only getting 2 parts of the service?
    I find it hard to believe there isn't some way to make the box or the remote change the image size. Can anyone help?

    why do so many topics go to private section?  we need to see how it's responded to in case we have the same problem..
    but yes, our 2500 sd box, basically the 4:3 standard non HD box broadcasts to fit a 4:3 TV.. now some channels will have the black bars on top and bottom to accommodate the 16:9 aspect ratio..  you'll notice this if you run the 2500 box on a flat screen.. if you have it in 16:9 ratio on a flat screen it looks stretched.. the only way to watch regularly is in 4:3 mode.. which basically has the image with bars on all sides.. or you can zoom it and lose a portion of the image.. but it's because the box thinks you're using a 4:3 sd tv so the boxes appear on top and bottom so it can still fit the wider image it's filmed in.. so with flat screens you need the HD box i guess..  unless there is something i'm missing but there isn't a setting that i can find to change how the box exports the image for a flat screen or 4:3.   I know the HD boxes have an 'SD Override' option.. which i guess tells the box you're not using a 4:3 tv anymore.. but that option is not on the 2500 SD box.. believe me i looked..  but this is all in reverse for your issue anyhow as you're having trouble with the SD box on an SD TV...  which yeah, if you run SD the quality of picture is not as good as the HD programming.. so please let us know what they say to do for you.

  • X-Box Live MTU

    I'm having a lot of trouble getting my X-Box live wireless adapter and my Linksys router downstairs...
    When I do the test for X-Box live connectivity, everything passes except the MTU test.
    I have changed the MTU several times, made sure it's above 1364, even tried some MTU's that are supposedly compatible with AOL, but to no avail. I even called Linksys supportline and no help after a couple hours.
    Anyone know what the problem could be?
    Thanks

    try keeping the MTU on 1364....assign a static ip add on the x-box .. say , 192.1681.10 and also the dns address off of the status page on the router ui...
    under "applications and gaming" tab , forward ports 88 and 3074....
    if nothing works, ensure that u have the latest firmware on the router....

  • X-Box Live lag issues

    Recently, after we upgraded to FiOS my son started noticing lag spikes during games on X-Box Live. (Teleporting, Disconnecting, Etc.)
    We had DSL from Verizon, which he originally used the X-Box on, and with the DSL he noticed that it actually was faster then FiOS currently is. Since we can't directly run an ethernet to the router (the router is downstairs), he is currently using ICS on his laptop in order to get an X-Box Live Connection. As I said, with DSL, there were no problems at all. We think it may be router-related.
    Any help is greatly appreciated.

    yes that sounds like a wireless lag issue. there are only a few options for that.
    1) run a Ethernet cable to the xbox.
    2) get a wireless booster 
    3) get a second wireless device and place it closer to the xbox. (the option I have done myself)  

  • Ipod touch is no longer compatible with Gear Box??

    I turned on Gear Box with Ipod touch attached and having been avoiding update notifications, decided to go ahead and let it update ios 5 thingy.  Once updated via my laptop connection I put it back in the slot on the gear box and now I get a message on the Ipod that Gear Box no longer recognizes Ipod Touch.  Tried it a few times, but just won't work.  The Ipod works on the battery only.   And of course it happened on Sat night so no support via phone.  Any help will be appreciate.
    Trish

    Thanks to Gear 4, not the Apple phone support, my Ipod touch is now working with Gear box.  You have to do a hard reset once or twice and then turn the Gear 4 system on, turn your Ipod touch on to music, and insert it into the dock.  It should work then.  If not, I suggest you contact Gear 4.
    Trish

  • I have created a .pdf form with text boxes, but the recipients are unable to fill in their answers.

    How can I distribute a form with text boxes so that the recipients are able to type into the boxes?

    This forum is for the Adobe FormsCentral (formscentral.adobe.com) which is a service that allows you to create, collect and analyze data using an online web form. You should ask PDF related form questions in the Acrobat forums: http://forums.adobe.com/community/acrobat/forms
    I'll move your post to that forum so you don't need to retype it. They can help you out...
    Randy

  • Issue with 'text box' in rtf sub template for peoplesoft XMLP

    Hi all,
    i have a weired problem using 'text Box' in a sub template. I am calling a sub template from my template. In my Sub template i have a text box ( i am using text box bcoz i want to justify the text not to the page margin but starting from a specific column.not sure if there is any other way with which i can do the same !!) . When i process the report (using application engine program) i get the below error
    Message Log entry:
    [052311_071441208][oracle.apps.xdo.common.xml.XSLTWrapper][ERROR] XSL error:
    psxmlp://SUB_BMX2<Line 63, Column 191>: XML-22031: (Error) Variable not defined: '_MR'.
    @Line 63 ==> </xsl:stylesheet>
    [052311_071441216][oracle.apps.xdo.template.FOProcessor][EXCEPTION] java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
         at java.lang.reflect.Method.invoke(Method.java:618)
         at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(Unknown Source)
         at oracle.apps.xdo.common.xml.XSLT10gR1.transform(Unknown Source)
         at oracle.apps.xdo.common.xml.XSLT10gR1.transform(Unknown Source)
         at oracle.apps.xdo.common.xml.XSLTWrapper.transform(Unknown Source)
         at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
         at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
         at oracle.apps.xdo.template.FOProcessor.createFO(Unknown Source)
         at oracle.apps.xdo.template.FOProcessor.generate(Unknown Source)
         at com.peoplesoft.pt.xmlpublisher.PTFOProcessor.generateOutput(PTFOProcessor.java:74)
    Caused by: oracle.xdo.parser.v2.XPathException: Variable not defined: '_MR'.
         at oracle.xdo.parser.v2.XSLStylesheet.flushErrors(XSLStylesheet.java:1534)
         at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:521)
         at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:489)
         at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:271)
         at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:155)
         at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:192)
         ... 13 more
    [052311_071441218][oracle.apps.xdo.template.FOProcessor][ERROR] End Memory: max=64MB, total=11MB, free=1MB
    PeopleTools 8.49.27 - Application Engine
    Copyright (c) 1988-2011 PeopleSoft, Inc.
    All Rights Reserved
    Processing started
    data extraction for EMPLID:1000646332 EMPL_RCD:0 EFFDT:2009-12-28 and EFFSEQ:6
    CFilem::LoadDefn(RDCRHIUTEECKNDZN2SPSRQ) : read 1 chunks
    UnchunkStuff : read 1 chunks for nCharDataLen 10520 chars
    CFilem::LoadDefn(RDCRHIUTEECKNDZN2SPSRQ) : after decode & decompress: 35330 bytes
    Calling XMLP
    Processing Report Defn:TR_BMX2
    Error Executing XMLP.Error generating report output: (235,2309) PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:ProcessReport PCPC:51952 Statement:1163
    Called from:TR_LATAM_CONTRACTS.ContractsXML.OnExecute Name:ExecuteXmlp Statement:16
    Called from:TR_LAMCNTRCT.MAIN.GBL.default.1900-01-01.Step04.OnExecute Statement:20
    Process 442706 ABENDED at Step TR_LAMCNTRCT.MAIN.Step04 (PeopleCode) -- RC = 22 (108,524)
    Process %s ABENDED at Step %s.%s.%s (Action %s) -- RC = %s
    It works fine when i remove the text box from my sub template. I tried to put the text box directly in the main template and it worked fine !! it is erroring out only when i use the text box in sub template !!
    Template file:
    <?import:psxmlp://SUB_BMX2?>
    <?choose:?>
    <?when: .//LETTER_CD=”PA4”?>
    <?call: BA101?>
    <?end when?>
    <?otherwise:?>
    Invalid Letter Code. No Sub Template Call defined for this Letter Code.
    <?end otherwise?>
    <?end choose?>
    Sub Template:
    <?template:BA101?>
    Testing without text box.
    Testing with text box
    there is a text box with text here .. cannot be copied from word !!
    <?end template?>
    i got the below error when i tried to 'preview' the report from my report definition.
    Error generating the report output: During calling method PTFOProcessor.generateOutput, the XDO engine throws an exception:NULL. (235,3101) (235,2309)
    Error occurred during the process of generating the output file from template file, XML file, and the translation XLIFF file.
    Any help would be greatly appreciated.
    Edited by: Naveen Kumar on May 23, 2011 4:31 AM

    misunderstood =/
    Original (Coming - output):  "<PAY_TXT>PAYκ Contact your bank or financial institution to make this payment from your cheque, savings, debit or transaction account.</PAY_TXT>"
    it's in output but what is data in database ?
    sorry but without knowing about source data for forming the xml i haven't ideas about your problem
    in db it's "TM " or "™" or ... ?
    Original (Coming - output):  "<PAY_TXT>PAYκ Contact your bank or financial institution to make this payment from your cheque, savings, debit or transaction account.</PAY_TXT>"
    Something like XAE or "K" after PAY Value in the xml tag and continued the text value.  (Tag value is not getting copied exactly here - i am sorry for that )
    that's ok. i need to see the problem not the data as is
    Expected (output):  "Here it needs to produce the "PAY TM" (Here "TM" should be super scripted to "PAY" Value in tag).
    as super scripted in xml?
    as idea - you can have <PAY_TXT>PAY TM</PAY_TXT> and in publisher set TM as super
    Designing XSL Subtemplates - 11g Release 1 (11.1.1)

  • When I try to sync my iPhone 4s it no longer works.  I have a bunch of songs that now show up on my iPhone with a red circle with a box inside of it and they won't play, yet I can find them and play them on my Mac.  What do I do?

    My iphone 4s will no longer sync music from my music library on my Macbook Pro.  I also have a bunch of songs that now have a red circle with a box in it next to the song on my phone and those songs will not play.  They are present in my itunes library and I can play them on my Mac but they will not play on my iphone.  I have tried unchecking all the music and applying those changes and syncing and it does nothing.  All the same music remains on my phone, unchanged.  Help! What do I do? I have read to uninstall iTunes and reinstall it but will I lose all my music?

    Hello Courtney,
    Thank you for the details of the issue you are experiencing when syncing your music to your iPhone.  It sounds like iTunes is not able to locate the original file for the song to transfer it to your device.  I recommend reviewing the following articles to locate you music files on your computer:
    iTunes: Finding lost media and downloads
    http://support.apple.com/kb/ts1408
    Where are my iTunes files located?
    http://support.apple.com/kb/ht1391
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I was given an iPhone 4 from a friend and I was trying to reset it to factory settings but it won't let me. It's keeps popping up with a box to put in my friends iCloud account password in but I don't know it. How can i delete their iCloud account?

    I was given an iPhone 4 from a friend and I was trying to reset it to factory settings but it won't let me. It's keeps popping up with a box to put in my friends iCloud account password in but I don't know it. How can i delete their iCloud account without knowing their password?

    You cannot delete the iCloud account that is signed on to Find My iPhone unless you know the password. This is called the Activation Lock:
    ACTIVATION LOCK
    It is an anti-theft security measure that is a part of iOS 7. You can only get around this by following the steps in this support article:
    Find My iPhone Activation Lock: Removing a device from a previous owner’s account
    Contact your friend. This is the only way around the lock.
    Best of luck,
    GB

  • When I click the iCloud button I get a browser with check boxes, not slider buttons and it does not have a "backup and storage" button.  So I cannot set up backup.

    When I open my iCloud browser it looks different than "normal." It shows the list with check boxes, not slider on-off buttons.  It dos not show a "storage and backup" button so I cannot set up my backup. What is wrong?

    If see something like the image below it's because you are looking at the iCloud settings on your Mac, not on an iOS device (which has sliders).  Storage & Backup isn't in the Mac settings because you cannot back up your Mac to iCloud.  Only iOS devices can back up to iCloud.  On a Mac, you can get information about your iCloud account storage by looking at the green usage bar at the bottom and by clicking the "Manage..." button on the bottom right.

  • Grid with check box.

    Hi,
    I want to make a grid with check box. I want to have two column in the grid. One column of the grid will show some column name of a table and the other column will contain check box. If I tick the check box of a the selected row of the grid then the value (e.g. Y or N) will store in the particulr table.
    I have written some code regardig this. But I am not getting my problem solved. I am sending the code sample below.
    oNewItem = oOrderForm.Items.Add("MyGrid", SAPbouiCOM.BoFormItemTypes.it_GRID)
            oNewItem.Left = 20
            oNewItem.Top = 30
            oNewItem.Width = 198
            oNewItem.Height = 130
    oGrid = oNewItem.Specific
    Dim str As String
            str = "SELECT COLUMN_NAME AS FACILITIES, '' AS TICK FROM PIONEER.INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = N'OITM' AND ORDINAL_POSITION BETWEEN 102 AND 165"
            oOrderForm.DataSources.DataTables.Add("MyDataTable")
            oOrderForm.DataSources.DataTables.Item(0).ExecuteQuery(str)
            oGrid.DataTable = oOrderForm.DataSources.DataTables.Item("MyDataTable")
            ' Set columns size
            oGrid.Columns.Item(0).Width = 270
            oGrid.Columns.Item(0).Editable = False
            oGrid.Columns.Item(1).Width = 70
            oGrid.Columns.Item(1).Type.gct_CheckBox.GetValues()
    From The last line I am getting problem. Please any one can help me for this problem.
    Thank you
    Amit Kumar Shai

    Hi
    The last line should read like this
    oGrid.Columns.Item(1).Type = SAPbouiCOM.BoGridColumnType.gct_CheckBox

  • I have a new laptop running Windows 8.1. The 10.3.1 version downloaded, but it was incompatible. Then I tried to download Itunes 11.1.5 and it comes up with the box asking me to save. When I click on save...NOTHING happens. AAAAAHHHHH!

    I have a new laptop running Windows 8.1. The 10.3.1 version downloaded, but it was incompatible with Windows 8 and 64-bit. Then I tried to download Itunes 11.1.5 and it comes up with the box asking me to save. When I click on save...NOTHING happens. AAAAAHHHHH!!! I even clicked on the download list to see if it is possessed and downloaded somewhere I didn't choose, but that's NOT happening either. Please help me! I have been messing with this and 4 other problems on this laptop for the last 32 hours. I'm getting tired and frustrated. Also, I haven't even put music on THIS Laptop because on my other one, I ended up with at least 5 copies of EACH SONG. Let's see 636 X 5 = 3,180 and they were in EVERY POSSIBLE LOCATION!!!
                                                                        Thanks for your time,
                                                                         Laura

    See the futher information area of Troubleshooting issues with iTunes for Windows updates for download advice and direct links if required.
    See this migrate iTunes library post for advice on moving the library over from a previous computer and this post on deduplication.
    tt2

  • My LR 5 is in a state of partial crash, many hundreds of photos I have recently processed having somehow been deleted. How can I talk with an actual live adobe expert person to find out if this is salvageable?

    Suddenly today, in the process of going through a large backlog of images from the last month of wildlife photography, using Develop, and deleting large numbers along the way, I noticed that hundreds of images from the last week of my work have at some pointat some point in the last hour or two today, while I have been working on them,  simply disappeared from from the Catalog's "All Photographs" and from the individual day by day photo folders in the Catalog. I also noticed when trying to figure this out that simply clicking the black flag bar after selecting an image as a prelude to clicking "Delete Rejected Photos" or even just clicking  only the white flag, causes the selected image to disappear from all photographs and from the image folder for that day!! My last LR  backup was a weeklyJune 16, but in the last week I have done several solid days of work processing these images. (Whatever happened does not appear to have deleted the raw images from my hard drive, all of which are backed up when I finished work last night.) Is there any way I can talk directly with an adobe live expert person to see if there is any way to salvage the processed images that appear to have disappeared from the LR system?

    You generally won't get staff here but you will get help from people with a vast knowledge of Lightroom inside and out.
    If what you says happens when you use the flag filter, is it reproduceable  and does Ctrl/Cmd-z undo the removal.
    Tell us your OS, Lightroom version and where the image files are stored.
    You can always try the Help Chat but I think you will be better off here.

  • Which cable (original apple usb or bmw y) shall i use to connect my 4th gen iPod photo 60 gb to bmw f10 (with com box) is it going to work with the apple usb cable and how long does it take till I can access the 33gb content via the bmw display?

    Which cable (original apple usb or bmw y) shall I use to connect my 4th gen iPod photo 60 gb (old but still working ok) to bmw f10 (with com box), build december 2010 > is it going to work with the apple usb cable and if so, how long does it take till I should be able to access the 33gb content via the bmw display?
    Alternatively: How long does it take if I would have to use the bmw y cable till I can access the 33gb content via the bmw display?

    Which cable (original apple usb or bmw y) shall I use to connect my 4th gen iPod photo 60 gb (old but still working ok) to bmw f10 (with com box), build december 2010 > is it going to work with the apple usb cable and if so, how long does it take till I should be able to access the 33gb content via the bmw display?
    Alternatively: How long does it take if I would have to use the bmw y cable till I can access the 33gb content via the bmw display?

Maybe you are looking for