1st gen imac g5 graphics problems

Hi-
I have a first gen 1.8ghz 20" imac g5. About a year and a half ago, the mother board was replaced because of the exploding resistors. Recently, the screen has started intermittently getting pixelly in spots (like it did pre-mo-bo replacement) and then freezing (which is new). It happens every day or two, or sometimes within 10 minutes of booting. It seems to happen more quickly when Safari is up strangely enough...
I took it to the apple store this weekend and the genius there said that the resistors were not exploding and that the mother board looked good. I haven't seen any drivers for the graphics card available. Wondering if anyone else has had this experience and if there is anything that can be done. A shame to have to do away with this thing...

HI,
I too have a 1st gen iMac G5 20". It too recently started showing artifacts on the screen. For example when moving a window parts of the screen would get messed up. The problem became worse to the point where it would get stuck on a blue screen during boot (mouse and pointer still working). I took the cover off and saw three leaking capacitors on the mother board. They were in the group of 5 near the middle bottom of the board. I had them replaced, but unfortunately, this did not fix the problem or improve it in anyway. At the moment I have no idea what the problem is. Is this in anyway similar to your problem?

Similar Messages

  • No video whatsover G5 1st gen iMac

    My friend got this pristeen 1st gen iMac for free at a 2nd hand store outreach center. The HD and ram were missing and a I T tech we thought knew told us that was all it needed. I had no experience with anything Mac but I'm willing to learn. After installing 2 Gb of new PC 3200 400 mhz ram,new Western Digital 320 Gb 7200 rpm 32mb cache Sata hard drive, new apple wired keyboard,new Turtle USB Mac mouse and the brand new OS X Leopard disc and..... no video! I'm thinking this needs a replacement mobo but the mobo and capacitors are all looking great(appears new) so I don't think they're the problem. If I'm missing anything obvious please help. Possibly there's a video card missing and I don't realize it yet. Otherwise I'll be looking for one of those replacement G5 mobo's or a trade plus difference deal for another refurb or used Mac. Any ideas?

    Is it starting up, but with no video? Or is it not starting up? I'm not certain an iMacG5 will handle a SATA disk drive successfully. Another possibility is that whoever had it before saw it die, salvaged the HD and RAM, and junked it. Sometimes you get what you pay for! You could get an external case for a SATA Hard disk, and maybe find someplace that would take the RAM in trade for some that's right for a new Mac, and be ahead to just buy a new one. If you're like me, I HATE to see one bite the dust with no hope of resuscitation!

  • Choppy video playback on my 1st Gen iMac G5

    Everything from internet video to DVD playback on my 1st Gen iMac G5 is choppy and getting more so as time goes on. Can anyone tell me if this is a symptom of the defect that's covered under the extension plan or is this just some other problem?

    Check the version in the Application Folder!
    (I have had no problems at all after installing QT 7.5 on my G5 iMac in case you think it can't work at all.)
    It is possible that something in either your pre-existing setup or your method of installing updates, are the root causes of whatever problems you are having with QT 7.5 particularly with choppy playback. Out of date plug-ins and add-ons could also be playing a part. Some users have found choppy playback to be associated with improperly loaded plug-ins and add-ons from third party vendors as well as those included by Apple with prior versions of Quicktime.
    Third-party add-ons include DivX, Flip4Mac, or FLV components, while the included plug-ins are AppleIntermediateCodec.component, and AppleMPEG2Codec.component. The files for these are located in the root library, therefore a faulty component will load improperly for all users, resulting in choppy playback even when a user creates a new account. Some may need updating or just reinstalling to work with QT 7.5.
    You should therefore:
    Remove and re-add all quicktime components and plug-ins.
    Navigate to /Library/QuickTime/
    Move all plug-in ".component" files from the folder (to the Desktop, for instance)
    Launch QuickTime and quit it again
    Place the ".component" files back in the QuickTime library folder
    Launch QuickTime again, and the choppiness should be better.
    A few more things to try but in each case first close all applications and repair permissions.
    1 Try opening then closing GarageBand, or launching then quitting the "Audio MIDI Setup" application located in Applications/Utilities. Failing that, go back to Audio MIDI Setup, and under the Audio Devices tab, make sure the Audio Output Format is 44100.0 2ch-16bit.
    Restart your Mac.
    2 Go to the Library on your main hard disk and find the Internet Plug-Ins folder. Try removing the following files:
    QuickTime plugin.plugin
    Quicktime plugin.webplugin
    Restart your Mac.
    Re-install the Quicktime 7.5 update
    Go to Home/Library/Receipts and delete the file Quicktime 7.5 pkg.
    Download from the Download page on the Apple site the correct version of Quicktime 7.5 for your Mac.
    Install it and restart your Mac. Repair permissions.
    3 If still no luck, it is time to look carefully at your plug-ins and add-ons. The safest way is to download and re-install all of them. The ones you need in order to see and hear virtually everything the web has to offer are:
    RealPlayer 11 (which is no longer in beta) for Mac from:
    http://www.versiontracker.com/dyn/moreinfo/macosx/15540
    Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
    Perian from http://perian.org/
    You should read this support page http://perian.org/#support in case you need to delete older codecs.
    Adobe FlashPlayer should first be uninstalled using the appropriate uninstaller available here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157&sliceId=2 and then the latest version obtained from here: http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash and installed.
    (You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.)
    You should also ensure that you have downloaded and installed all the correct version for your Mac of all recent Security Updates.
    (N.B. Security Updates require both a restart and a permission repair.)
    In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/divx/mac/
    Now go to Safari Preferences/Security, and tick the boxes under Web Content (all 4 of them) to enable Java.
    Lastly open Audio Midi Setup (which you will find in the Utilities Folder of your Applications Folder) and click on Audio Devices. Make sure that both Audio Input and Audio Output, under Format, are set to 44100 Hz, and that you have selected 'Built in Audio'.
    Important: Now repair permissions and restart.
    There is an additional 'fix' you could try if you are having problems with Flash and Quicktime, depending on which type of Mac you have:
    On Intel Macs, make sure that you are not running Safari in Rosetta. You can check this, and change it, in the Get Info window.
    On PPC Macs, go to the Hard Disk/Library/Internet Plug-Ins folder, and drag the file 'QuickTime Plugin.webplugin' to the desktop. Quit and restart Safari. If things have improved you can trash that file. If they haven't put it back, as the lack of this plug-in can cause QT content in some widgets to cease functioning.
    If none of the foregoing worked, then you should consider and archive and install before repeating all of the above.

  • 1st Gen Imac G5 Question

    I own a 1st Gen Imac G5. I just recently purchased the Apple VGA Display Adapter hoping I would be able to use an external monitor as an extention of my desktop... after looking through the system preferences I realized there was no such option. I thought it might have had something to do with the OS version I was using so I upgraded to Leopord thinking it would solve my problem... it did not. Is there any sort of Patch or possible solution that could solve my problem?
    Nick

    Welcome to Discussions, Nick - as far as I know, you can only mirror to another display.

  • 1st gen iMac G5 Crashes and Won't Boot Up

    To whom it may concern :
    I've been having problems with my 20" iMac G5.
    It frequently freezes and a message that says I have to restart my computer by pressing the power button for a few seconds appears.
    At first, after I've done as the message said, my computer booted up successfully and after startup a message that says "Mac OS X quit unexpectedly" appeared, although when I pressed Report it did nothing.
    For the past few days, the same as above occurs except when I try to boot up my system it starts booting up and freezes on a black screen while the computer backlight is on.
    If I'll leave it on in this state for a minute or two, the fans will begin spinning at maximum speed (I believe so due to the great noise and mild dust they will produce when doing this).
    I should state that it freezes randomly and not after a specific action: when I multi task, when I return to the computer after being idle (screen saver or the monitor was off) or even when no programs are running.
    Does anyone know what's wrong with my Mac ?
    Please Help !!
    - Ben
    1st gen 20" iMac G5 (1.8 GHz)   Mac OS X (10.4.9)  

    To The Apple Discussion Boards!
    Except for your keyboard & mouse, disconnect all devices from your computer & repair disk & permissions from your Tiger DVD.
    Repairing permissions from the Tiger DVD
    Boot up from your Tiger Install DVD while holding down the "c" key.
    Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
    Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
    If Disk First aid is able to complete the repair now click on the "Repair permissions" button.
    Once this process has been completed restart your computer.
    http://docs.info.apple.com/article.html?artnum=25751 About Disk Utility's Repair Disk Permissions feature

  • 1st Gen iMac died-cloned HD onto new iMac-software needs to be deactivated?

    My old G5 iMac (1st gen) died - capacitors. The Genius Bar confirmed and in a thoughtful gesture removed the HD so that when I purchased a new iMac it would be easier for me to transport the HD & for them to clone (he said they would do it free).
    There's no way I could afford to buy a new iMac. eBay to the rescue: I purchased a used iMac G5 17", 2 GHz, 2 GB ram, 160 GB. (A little step up from the old 17" 1.8 GHz, 1GB ram, 80 GB.) I took it to Tekserve; they charged me $60 to clone.
    Everything is hunky-dory. Knock-on-wood, the eBay used iMac is working fine (this is still the first week).
    Today I launched Photoshop to discover that the app would be valid for only 5 more days! It seems that I am limited to 2 users: my old iMac and my laptop. If I deactivate the old iMac the message says I can activate the new iMac as a user.
    Make sense? But my old iMac is just a chassis and a separate(d) HD. How do I communicate with it to deactivate it as a 'user?'
    (1) Am I going to need to take my old HD back to Tekserve (auth service) within the next 4 days and have them hook it up and deactivate?
    Since my new iMac is cloned & running & backed up, I was thinking of erasing the old HD and selling it for parts.
    (2) Is there a way for me (I'm not very technically savvy) to erase my old HD that is separated from the iMac and sitting in an anti-static bag in order to sell it?
    (3) Is my best option to have Tekserve do both: 'deactivate' and then erase it? Their charge will impact the potential profit I might make selling it for parts...
    (4) Short of me launching every software app, are there any others that, in your experience, will have this same 'deactivation' issue (before I erase that old HD forever)?
    Thanks to all esteemed gurus for any and all advice!

    I ididn't think Adobe would be helpful. Nut lo & behold, they were understanding and I was able to activate the software on my cloned iMac.
    I didn't think it could be so simple!
    Meanwhile, I have taken the old 80 GB hard drive into Tekserve for a clean install and will put it up on eBay for parts/repair along with the 'chassis.'

  • 1st gen iMac G5 resurrecting from the dead? (strange clicking sounds)

    I have a first gen iMac (pre-iSight) that I bought a few years ago brand new. But the past 8 months or so I've been having a very strange power problem where occasionaly pressing the power button does absolutely nothing... WAIT! I know you hear about this problem all the time but before you click 'back' I'll have you know I too have read countless of these types of power problems on forums, but this one seems different!
    Sometimes after unplugging, waiting for a few minutes, then replugging the power supply (while all other cords disconnected) it'll all of the sudden turn on. I recently checked inside the computer as one tutorial suggested to see if the first of 4 LED lights turn on when plugged in, and it does, meaning it's not power supply failure. The biggest problem with the whole thing is that is that the "unplug-then-replug"(sometimes upwards of 15 times) doesn't always work, and always seems to happen at varying degrees of inactivity depending on how long the computer has been off.
    I've been doing this for 8 months, afraid to turn my computer off not knowing for sure i'll get it back on (which can take up to a day sometimes). And my resurrection methods seem to be more and more futile, as today and yesterday i've had no luck. LASTLY -- and this really confuses me -- I usually hear a very faint but rapid clicking noise when I plug in the computer (before I even turn it on, never happens when it's actually on) after its been unplugged for a while. The sound seems to be coming from near the bottom of the computer, so I cant imagine that it's that dreaded "Hard-drive Death" symptom (since the hard drive isnt even running).
    Please, if you can, offer me some insight regarding these issues, I've looked everywhere and it seems I'm the only one having them! I'm almost to the point of gasp! actually finally going to the apple store and paying them to fix it.....

    Hmm, the fan? How would I go about checking that? I want to try everything I can.
    DEVELOPMENT: I got the computer on last night (using it right now)! I think it was off for almost exactly 24 hours since the last time I had it running. The most frustrating thing is that I don't really know what I did differently to get it to boot up again. That whole day I was just checking it about every hour or two, unplugging and replugging the power (at one point I opened the back and tried pressing those two tiny buttons under the fan, one is an internal power switch, and the other some sort of reset button, nothing noticeable happened with either, although the clicking sound that occasionally showed up hasn't reared its head lately). I think my computer is almost at its end, and now that its on I'm going to try my best to keep it running. One more slip into a coma and it might not make it out...

  • 24'' iMac 2006 graphic problems

    I have an old iMac which I am planning to give away for free. It is a 2006 24 '' iMac with 2,16 GHz IntelCore duo processor. It had originally 1 GB RAM, but has now 4 GB RAM installed .
    The latest OS it had was iOS 10.7 Lion, and there were some graphic issues where parts of the screen was really odd.
    I cleared the HD and did a clean install of iOS 10.7 Lion using the recovery HD partition, The installation proscess was uneventful, and with no graphic disturbances. But as soon as I started using the machine, there was again graphic problems. I also got som of the "You need to restart your computer...." messages.
    I then again cleared the HD and did a clean install of iOS 10.6 Snow Leopard from a SL DVD. Again an uneventful installation, but the same graphic problems when using the machine.
    I repeated the proscess and did a new clean install of iOS 10.7 Lion, this time from an installation USB stick I made some years ago. Same thing.
    I then cleared the HD once again and did a clean install of iOS 10.5 Leopard from a DVD. This time I was really optimistic because everything looked so good. But after using the iMAc for some minutes, there are again graphic problems. It seems the problems are less with Leopard than the other iOS I have tried. SOme times the screen looks normal, sometimes there are horisontal stripes across the screen, and sometimes part of the screen is really disturbed.
    During the installation proscess there are no graphic issues.
    I have repaired permissons, reset PRAM and using Disk Utility to repair the HD shows nothing wrong.
    Does anyone have any ideas what is wrong? Is it a hardware or a software problem? I do not want to use much money or much time on this, as this is really an iMac I do not use anymore.

    It's not software. It's consistent with a graphic card/logic card problem.
    I have an iMac, and I'd be obliged if you could satisfy my curiosity. What kind of computing have you done? Pretty routine web browsing and email?  Gaming and video editing? Have the temps gone up very high at any time while using it? Did the problems happen after your latest upgrade? Have you tried downgrading the OS?
    Thanks!

  • 1st Gen Mac Pro - Graphics card upgrade options?

    Hi guys,
    I have the 1st gen Mac Pro with 2 x 3GHz dual core xeons and a Radeon X1900 graphics card. I have wanted to upgrade to a new card for a while, however, I can't find any that apple say are compatible. I wanted to upgrade to a 5870 but on apples website it said this wasn't compatible with the first gen.
    What is the limiting factor here? Is it the software or hardware?
    What is the best card I can get for my machine?
    Please help!
    Thanks Guys
    Tom

    Your post has been added to a thread regarding Mac Pro Xeon Tower computers. These have nothing in common with your MacBook Pro.
    To get an answer that is meaningful, you need to post on the MacBook Pro forums, here:
    http://discussions.apple.com/category.jspa?categoryID=190

  • 1st Gen iMac G5 BAd Power Supply

    Hi, My iMac G5 power supply is officially dead. It was confirmed at the Apple Store at the Genius Bar. Apple apparently no longer sells the power supply for the first gen iMac G5s. I have two questions: Does anyone have a suggestion on where to buy a 3rd party power supply for that model? I'm not exactly sure what I should be buying. And secondly, is it worth it to do? I know the second question is more opinion but I'm curious of the success rate of replacing the power supply. My preference is obviously to replace it rather than laying out the money for a new iMac which I probably can't do right now) but if anyone's experience is that I'm just throwing money away on the power supply because of future issues or unreliability, I'd like to hear about it.
    Thanks as always!

    [Synaptech.com] or [welovemacs.com] will not only sell you the correct part, they will give you installation instructions. Another source is [http://www.jimwarholic.com/2008/07/how-to-repair-apple-imac-g5.php]
    As to your second question, as long as the rest of the Mac is in good shape, replacing the power supply should give you a few more years to collect your pennies for a new one down the road.

  • 1st Gen Mac Pro: Graphics Card Needed Urgently

    My mac pro is first generation (Model Identifier: MacPro1,1) Not the 2008 Mac Pro.
    I have Chipset Model: ATY,RadeonX1900
    This card is failing. Pram reset, SMC reset, and/or repair permissions do not work. I cleaned the fan intake area as well... card is still failing (won't wake from sleep, no display on reboot, etc etc).
    I have searched these forums high and low. Can anyone please provide me with a good option for a replacement card?
    The closest I have gotten is the "Apple nVIDIA GeForce 8800 GT Graphics Upgrade Kit for 1st Generation Mac Pro" which is now discontinued (?)
    I am getting really frustrated here, please help!

    Hey,
    I am having the exact issue with my Mac Pro (2.66 gig first gen intel). I have a discussion (unresolved) that you can find here.
    http://discussions.apple.com/message.jspa?messageID=9666490#9666490
    I wonder how many folks are having this particular card die early on them. I think the problem is more widespread than Apple would indicate on the phone.
    Anyway, my concern is whether or not the replacement card will be able to use the Open CL (sp?) protocol that will come with Snow Leopard. This will allow the computer to use free cycles on the graphics card to boost processing power. The guy on the phone and at the Apple store I went to was fuzzy on this. The last thing I want to do is upgrade to an antiquated card.
    He suggested the Nvidia GeForce 8800 GT which I cannot find (discontinued).
    Does anyone know if the 4870 will take advantage of the new Snow Leopard features?
    Thanks,
    G

  • 1st gen. iMac G5 power supply failure

    Hi, all!
    My 20" iMac G5 here at work collapsed and died on me about a week ago. The computer just deactivated abruptly; I actually had thought that I had kicked the plug or stepped on the power bar by mistake. I restarted it, and it worked for twenty minutes before dying again. Now it's entirely unresponsive. Having read up on the matter here and in the Mac support pages, I'm quite sure the power supply has failed. I'm in the process of finding out whether the computer is still covered under Apple's Repair Extension Program. (http://www.apple.com/support/imac/repairextensionprogram/ - I know the iMac model is correct, my serial number matches the range, I'm just not sure if the computer is less than three years old.)
    Anyway, the important thing for me is the hard drive, not the machine itself. We're entirely Mac-based here at work, so there is no shortage of machines for me to work on (I've already replaced my old machine with a much newer Intel-based iMac), but I would very much like to retrieve my data from my old hard disk. I've downloaded the DIY guide for opening the 20" iMac G5 and removing the hard drive, but I need some advice on the best plan of action. Should I then open another, working G5, remove its hard drive, insert my old hard drive and transfer my files off to my new iMac through our company server? Or is there another way to approach it? Is the hard drive on my 20" first gen G5 compatible with newer mac models, or am I going to run into problems with connectors, physical disk size, etc.? Or, should I just leave well enough alone and leave the entire operation to a Mac Genius?
    This will be my first time opening an iMac. I believe that I can open the machines and remove-replace the hard drives without voiding any warranties, correct?
    Thanks so much in advance for your help and advice!
    Adam

    I am on the phone right now with a product specialist about my iMac G5 power supply issues. Kind of ***** because he has, in so many words, said that the Genius is the Alpha and Omega and can extend the 3 year coverage. For me that is great except that the Apple store is over an hour away. I don't understand why the dude on the phone can't pull the switch and make it happen as well.
    Factor in:
    Unplugging iMac G5 and all peripherals
    Loading it in the car
    Driving an hour
    Carrying it into the Mall (apple store)
    Waiting for my Genius appointment
    More than likely getting it fixed for free (from the sounds of things)
    Driving back after it is fixed
    Doing everything listed in reverse.
    Would it just be easier to pay the $108 for a new power supply, wait a few days, undo some screws, and BAM! it works again?
    Update. Off the phone now. The product specialist flexed his muscles, back handed the Genius to gain authority, and basically stated that they WILL DEFINITELY repair either the power supply or the logic board or both if needed. I have already had them replace the logic board once. BUT, I still have to load it up and take it to the Apple Store. Boo.

  • 1st Gen Mac Pro Graphics Card replacement??

    I have a 1st generation mac pro and the nvidia geforce 7300 GT graphics card died.
    what can I replace this with that is relatively inexpensive? Does it need to be 256 or 512 MB?

    Thank You. That isn't quite my situation. There is a back on April 11th. 2010 and still unsolved. That is very disappointing considering there are a lot of people who are genius with technical issues on this forum.
    It booted up OK from a long power down time but if I have to restart for any reason or power down and start up within a few minutes, I will have nothing on the display (black). The little light is on and if you touch the button the light will goes to sleep but nothing on the display. I checked everything and tried every combinations. What I ended up with is; 1. to leave the computer on forever until the end of time but I can't because sometimes the fan would come on high and stay on., 2. if I have to restart, I have to unplug both power chords and wait at least half an hour to forty five minutes then plug everything back in and start. Most of the time it will work. This puzzled me.
    Everywhere I posted this problem, I've had zero answer. There must be some one who knows this issue and solved it before. Hello! Are you out there? Help me please!

  • Help - nonworking 1st Gen iMac 20" with bulging caps (power supply)?

    I have a 1st Generation (Rev. A) iMac G5 that does not power on. I looked at the logic board, and all of the capcitators appear OK. None are bulging. Most have a "K" on them, some have the infamous "X."
    I took my iMac into the Apple Store Genius expecting to be covered under one of the iMac G5 extended repair programs for out of warranty iMac G5s:
    http://www.apple.com/support/imac/powersupply/repairextension/
    http://www.apple.com/support/imac/repairextensionprogram/
    I did not qualify for either, as the one is only for video AND power issues, and the other only for Rev. B iMacs.
    So I took my iMac home looking to buy a power supply. I took the power supply out and opened it up and found all "X" capacitors, some of them bulging.
    So what is my next step?
    • Should I phone Apple Customer Relations at 800-767-2775 or Executive Relations 800-275-2237?
    • Should I take the power supply back in and show this to the Apple Genius and explain my situation?
    • What about the logic board? Should I demand Apple replace that too, since it has the X caps?
    I am out of warranty and no AppleCare. But according to other threads, like this one, this is a known issue and Apple should replace both my logic board and my power supply. But the genius I dealt with this morning seemed very knowledgeable and said he has been working on Macs for 20 years. He actually checked in my Macbook with a couple of issues and is resolving them no problem. But no joy on fixing the iMac.

    I took my Macbook in yesterday for video flicker and misbehaving battery. Received new battery, logic board, and inverter cable in about 32 hours. Kudos to Apple for fixing my in-warranty machine so quickly and not blinking an eye. The Genius who checked in my MacBook asked if I read about these repairs on the web, as he said it is a major problem. Ironically, since then I have been cautioned twice by Apple about what I read on the web.
    What does that have to do with my iMac saga? Absolutely nothing, other than since I went to pick up the MacBook, I took the iMac back in. Plus, I am trying to find some words of praise with Apple's prompt, no-hassle repair as with this iMac issue I can find no words of praise.
    I started out with this new Genius tonight by explaining I brought in the iMac yesterday and the Genius didn't even open my iMac but just checked the serial number and EMC number and must have been confused on the programs. I told him he denied me either program and said the one issue was for Video AND Power issues, and since I did not have a video issue, I was denied. I was asked who helped me, and gave his name, and I could tell the genius in front of me regarded him highly.
    Anyway, they brought out the MacBook, I signed for it, put it back in my laptop bag. Attention turned back to the iMac, and I could just sense a reluctance to help me. I had mentioned that there were X capacitors on the logic board, but that none of them were bulging, and I had read that could be a problem in the future and that people were getting logic boards replaced even though the problem was with their power supply and the logic board appeared fine. I received the party line again about misinformation on the internet and not believing everything I read. At least I convinced this guy to open up my iMac, which he would not do in front of me but took it into a back room.
    He came back out and said my capacitors were fine and there was nothing he could do. (Well, I had already told him they were fine.) I said that this was for power issues and the problem is obviously with my power supply and he said he could not help me with that.
    I was/am very ticked off and just didn't feel like getting into it. Normally I would have asked for the manager. The genius wouldn't even look me in the eye. I feel like I have leprosy or something. Has anyone else with a Rev. A iMac with serial numbers for this program get denied? I have not read such a thing on this forum. Someone please post a link to comfort me so I know I am not the only one.
    I just left, in defeat. I've got enough Mac service centers around me that I am going to take it to one of them. In fact, I DID take it to one of them first on Monday morning, but didn't have the original receipt with me, so they said that could be an issue, so I just left and took it to the Apple Store since I was already out that way.
    Maybe tomorrow I will find comfort back in the arms of one of those hybrid computer stores. The saga continues...

  • Ipod touch 1st gen; windows 7 connecting problem

    I just got a new Lenovo G550 with windows 7, and whenever i try to connect my ipod touch 1st generation to the computer I here the connecting "ding-dung" but my ipod doesn't charge or isn't recognized by itunes

    Doublechecking on a couple of known hardware/BIOS/Windows problems with windows 7.
    Do you have over 4 GB of RAM and an nVidia ECHI USB chipset on that Lenovo? Alternatively, do you have a P55-based chipset?

Maybe you are looking for