1st gen iMac G5 won't stay up but target

I've tried resetting the SMU but the power doesn't stay on. It comes on, as soon as the twirly lines start on the gray screen, it shuts off.
However, if I start it in Target Disk mode, it comes up and stays on so it isn't a power issue.
I dont have the system disks. Is there anything else I can try?
Thanks

"I dont have the system disks."
You are surely going to need them sooner or later. Strongly suggest that you get them or you can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those -
http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html

Similar Messages

No video whatsover G5 1st gen iMac

My friend got this pristeen 1st gen iMac for free at a 2nd hand store outreach center. The HD and ram were missing and a I T tech we thought knew told us that was all it needed. I had no experience with anything Mac but I'm willing to learn. After installing 2 Gb of new PC 3200 400 mhz ram,new Western Digital 320 Gb 7200 rpm 32mb cache Sata hard drive, new apple wired keyboard,new Turtle USB Mac mouse and the brand new OS X Leopard disc and..... no video! I'm thinking this needs a replacement mobo but the mobo and capacitors are all looking great(appears new) so I don't think they're the problem. If I'm missing anything obvious please help. Possibly there's a video card missing and I don't realize it yet. Otherwise I'll be looking for one of those replacement G5 mobo's or a trade plus difference deal for another refurb or used Mac. Any ideas?

Is it starting up, but with no video? Or is it not starting up? I'm not certain an iMacG5 will handle a SATA disk drive successfully. Another possibility is that whoever had it before saw it die, salvaged the HD and RAM, and junked it. Sometimes you get what you pay for! You could get an external case for a SATA Hard disk, and maybe find someplace that would take the RAM in trade for some that's right for a new Mac, and be ahead to just buy a new one. If you're like me, I HATE to see one bite the dust with no hope of resuscitation!

Choppy video playback on my 1st Gen iMac G5

Everything from internet video to DVD playback on my 1st Gen iMac G5 is choppy and getting more so as time goes on. Can anyone tell me if this is a symptom of the defect that's covered under the extension plan or is this just some other problem?

Check the version in the Application Folder!
(I have had no problems at all after installing QT 7.5 on my G5 iMac in case you think it can't work at all.)
It is possible that something in either your pre-existing setup or your method of installing updates, are the root causes of whatever problems you are having with QT 7.5 particularly with choppy playback. Out of date plug-ins and add-ons could also be playing a part. Some users have found choppy playback to be associated with improperly loaded plug-ins and add-ons from third party vendors as well as those included by Apple with prior versions of Quicktime.
Third-party add-ons include DivX, Flip4Mac, or FLV components, while the included plug-ins are AppleIntermediateCodec.component, and AppleMPEG2Codec.component. The files for these are located in the root library, therefore a faulty component will load improperly for all users, resulting in choppy playback even when a user creates a new account. Some may need updating or just reinstalling to work with QT 7.5.
You should therefore:
Remove and re-add all quicktime components and plug-ins.
Navigate to /Library/QuickTime/
Move all plug-in ".component" files from the folder (to the Desktop, for instance)
Launch QuickTime and quit it again
Place the ".component" files back in the QuickTime library folder
Launch QuickTime again, and the choppiness should be better.
A few more things to try but in each case first close all applications and repair permissions.
1 Try opening then closing GarageBand, or launching then quitting the "Audio MIDI Setup" application located in Applications/Utilities. Failing that, go back to Audio MIDI Setup, and under the Audio Devices tab, make sure the Audio Output Format is 44100.0 2ch-16bit.
Restart your Mac.
2 Go to the Library on your main hard disk and find the Internet Plug-Ins folder. Try removing the following files:
QuickTime plugin.plugin
Quicktime plugin.webplugin
Restart your Mac.
Re-install the Quicktime 7.5 update
Go to Home/Library/Receipts and delete the file Quicktime 7.5 pkg.
Download from the Download page on the Apple site the correct version of Quicktime 7.5 for your Mac.
Install it and restart your Mac. Repair permissions.
3 If still no luck, it is time to look carefully at your plug-ins and add-ons. The safest way is to download and re-install all of them. The ones you need in order to see and hear virtually everything the web has to offer are:
RealPlayer 11 (which is no longer in beta) for Mac from:
http://www.versiontracker.com/dyn/moreinfo/macosx/15540
Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
Perian from http://perian.org/
You should read this support page http://perian.org/#support in case you need to delete older codecs.
Adobe FlashPlayer should first be uninstalled using the appropriate uninstaller available here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157&sliceId=2 and then the latest version obtained from here: http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash and installed.
(You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.)
You should also ensure that you have downloaded and installed all the correct version for your Mac of all recent Security Updates.
(N.B. Security Updates require both a restart and a permission repair.)
In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/divx/mac/
Now go to Safari Preferences/Security, and tick the boxes under Web Content (all 4 of them) to enable Java.
Lastly open Audio Midi Setup (which you will find in the Utilities Folder of your Applications Folder) and click on Audio Devices. Make sure that both Audio Input and Audio Output, under Format, are set to 44100 Hz, and that you have selected 'Built in Audio'.
Important: Now repair permissions and restart.
There is an additional 'fix' you could try if you are having problems with Flash and Quicktime, depending on which type of Mac you have:
On Intel Macs, make sure that you are not running Safari in Rosetta. You can check this, and change it, in the Get Info window.
On PPC Macs, go to the Hard Disk/Library/Internet Plug-Ins folder, and drag the file 'QuickTime Plugin.webplugin' to the desktop. Quit and restart Safari. If things have improved you can trash that file. If they haven't put it back, as the lack of this plug-in can cause QT content in some widgets to cease functioning.
If none of the foregoing worked, then you should consider and archive and install before repeating all of the above.

1st gen imac g5 graphics problems

Hi-
I have a first gen 1.8ghz 20" imac g5. About a year and a half ago, the mother board was replaced because of the exploding resistors. Recently, the screen has started intermittently getting pixelly in spots (like it did pre-mo-bo replacement) and then freezing (which is new). It happens every day or two, or sometimes within 10 minutes of booting. It seems to happen more quickly when Safari is up strangely enough...
I took it to the apple store this weekend and the genius there said that the resistors were not exploding and that the mother board looked good. I haven't seen any drivers for the graphics card available. Wondering if anyone else has had this experience and if there is anything that can be done. A shame to have to do away with this thing...

HI,
I too have a 1st gen iMac G5 20". It too recently started showing artifacts on the screen. For example when moving a window parts of the screen would get messed up. The problem became worse to the point where it would get stuck on a blue screen during boot (mouse and pointer still working). I took the cover off and saw three leaking capacitors on the mother board. They were in the group of 5 near the middle bottom of the board. I had them replaced, but unfortunately, this did not fix the problem or improve it in anyway. At the moment I have no idea what the problem is. Is this in anyway similar to your problem?

1st Gen Imac G5 Question

I own a 1st Gen Imac G5. I just recently purchased the Apple VGA Display Adapter hoping I would be able to use an external monitor as an extention of my desktop... after looking through the system preferences I realized there was no such option. I thought it might have had something to do with the OS version I was using so I upgraded to Leopord thinking it would solve my problem... it did not. Is there any sort of Patch or possible solution that could solve my problem?
Nick

Welcome to Discussions, Nick - as far as I know, you can only mirror to another display.

How can I wipe a drive on an old iMac that won't stay on long enough to complete the task?

How can I wipe a drive on an old iMac that won't stay on long enough to complete the task?

Do you have access to another Mac? If so contact the two via a Firewire cable, boot your problem Mac into Target Disk Mode, Transferring files between two computers using FireWire,, and try to use Disk Utiltiy from the second Mac to reformat and erase your hard drive.

Have an iMac G5 won't stay connect to the internet

Have an iMac G5 won't stay connect to the internet by cable/ethernet for more than minute or so. After I reboot the Verizon modem I have five green lights, ethernet, network settings, isp, internet server all green. Open browser, internet, server go red. Somehow my grand-daughter downloaded some program that gives me a world back ground "Not licensed evaluation use only". If I change the background the world background comes right back.

Aminiman:
What make is the router?
What are the firewall settings on your Vista? What puzzles me is that your steam connection is fine and yet you cannot browse the internet.
I am sure you have right clicked on the system tray icon (wireless connection) and chose to repair the connection right?
Axel F.
Message was edited by: Axel Foley

I too don't want to send my 1st gen nano in unless I get a 1st gen back (others won't charge from my car integration system). Anyone know how to contact Apple to get this answer??

I too don't want to send my 1st gen nano in unless I get a 1st gen back (others won't charge from my car integration system). Anyone know how to contact Apple to get this answer??

iPod nano (1st generation) Replacement Program

30" has been flickering for months on start-up until warmed up. Also, brightness won't stay on, but cycles down repeatedly.

30" has been flickering for months on start-up until warmed up. Also, brightness won't stay on, but cycles down repeatedly.

OK, I tried setting Energy Savings to 1 minute. The Mac shut down and would not power back up via the power button, had to pull power plug. So it seems to be tied to the Energy settings.

HT2052 After I purchased , downloaded it and installed it , my Ipod Touch 1st gen restarted and show connect to Itune but Itune does not recognize it, I restarted the PC, the Ipod, now I paid for something that I was thinking will be easy and make my life

After I purchased , downloaded it and installed it , my Ipod Touch 1st gen restarted and show connect to Itune but Itune does not recognize it, I restarted the PC, the Ipod, now I paid for something that I was thinking will be easy and make my life easy

See if placing the iPod in DFU mode will allow a restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

1st gen iMac G5 Crashes and Won't Boot Up

To whom it may concern :
I've been having problems with my 20" iMac G5.
It frequently freezes and a message that says I have to restart my computer by pressing the power button for a few seconds appears.
At first, after I've done as the message said, my computer booted up successfully and after startup a message that says "Mac OS X quit unexpectedly" appeared, although when I pressed Report it did nothing.
For the past few days, the same as above occurs except when I try to boot up my system it starts booting up and freezes on a black screen while the computer backlight is on.
If I'll leave it on in this state for a minute or two, the fans will begin spinning at maximum speed (I believe so due to the great noise and mild dust they will produce when doing this).
I should state that it freezes randomly and not after a specific action: when I multi task, when I return to the computer after being idle (screen saver or the monitor was off) or even when no programs are running.
Does anyone know what's wrong with my Mac ?
Please Help !!
- Ben
1st gen 20" iMac G5 (1.8 GHz) Mac OS X (10.4.9)

To The Apple Discussion Boards!
Except for your keyboard & mouse, disconnect all devices from your computer & repair disk & permissions from your Tiger DVD.
Repairing permissions from the Tiger DVD
Boot up from your Tiger Install DVD while holding down the "c" key.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
If Disk First aid is able to complete the repair now click on the "Repair permissions" button.
Once this process has been completed restart your computer.
http://docs.info.apple.com/article.html?artnum=25751 About Disk Utility's Repair Disk Permissions feature

1st Gen iMac died-cloned HD onto new iMac-software needs to be deactivated?

My old G5 iMac (1st gen) died - capacitors. The Genius Bar confirmed and in a thoughtful gesture removed the HD so that when I purchased a new iMac it would be easier for me to transport the HD & for them to clone (he said they would do it free).
There's no way I could afford to buy a new iMac. eBay to the rescue: I purchased a used iMac G5 17", 2 GHz, 2 GB ram, 160 GB. (A little step up from the old 17" 1.8 GHz, 1GB ram, 80 GB.) I took it to Tekserve; they charged me $60 to clone.
Everything is hunky-dory. Knock-on-wood, the eBay used iMac is working fine (this is still the first week).
Today I launched Photoshop to discover that the app would be valid for only 5 more days! It seems that I am limited to 2 users: my old iMac and my laptop. If I deactivate the old iMac the message says I can activate the new iMac as a user.
Make sense? But my old iMac is just a chassis and a separate(d) HD. How do I communicate with it to deactivate it as a 'user?'
(1) Am I going to need to take my old HD back to Tekserve (auth service) within the next 4 days and have them hook it up and deactivate?
Since my new iMac is cloned & running & backed up, I was thinking of erasing the old HD and selling it for parts.
(2) Is there a way for me (I'm not very technically savvy) to erase my old HD that is separated from the iMac and sitting in an anti-static bag in order to sell it?
(3) Is my best option to have Tekserve do both: 'deactivate' and then erase it? Their charge will impact the potential profit I might make selling it for parts...
(4) Short of me launching every software app, are there any others that, in your experience, will have this same 'deactivation' issue (before I erase that old HD forever)?
Thanks to all esteemed gurus for any and all advice!

I ididn't think Adobe would be helpful. Nut lo & behold, they were understanding and I was able to activate the software on my cloned iMac.
I didn't think it could be so simple!
Meanwhile, I have taken the old 80 GB hard drive into Tekserve for a clean install and will put it up on eBay for parts/repair along with the 'chassis.'

1st Gen Apple TV won't play iTunes purchased movie

I purchased a movie (not HD) on iTunes and cannot play it on my 1st gen Apple TV. My older movies are still there to be viewed. Any thoughts?

Does it appear in the movie list on the AppleTV1 but won't play? Does it give an error?
Try purchasing something on AppleTV1 direct - check in iTunes you may find a free episode of a TV Show or similar. I had an issue last year with new content until I purchased something else on AppleTV - i assumed it was some kind of authorisation getting updated.
AC

1st generation iMac G5 won't start up with LaCie connected

Sorry if this has been asked a zillion times, but I am trying to help a friend (as you can see it is not my iMac):
She has a 1st generation iMac G5, and a LaCie external harddisk connected by firewire. The LaCie has an independent power supply, i.e. not powered by firewire.
Her iMac starts up fine when the LaCie is NOT connected, but refuses to do so when it is. This problem did not always exist.
Does anyone have the answer - better still a cure?!

Is the LaCie on and showing on the desktop when she shuts down? It's always a good idea to eject FW drives before shutting down, and to start up with them unplugged, otherwise data corruption can occur.
Miriam

1st gen iMac G5 resurrecting from the dead? (strange clicking sounds)

I have a first gen iMac (pre-iSight) that I bought a few years ago brand new. But the past 8 months or so I've been having a very strange power problem where occasionaly pressing the power button does absolutely nothing... WAIT! I know you hear about this problem all the time but before you click 'back' I'll have you know I too have read countless of these types of power problems on forums, but this one seems different!
Sometimes after unplugging, waiting for a few minutes, then replugging the power supply (while all other cords disconnected) it'll all of the sudden turn on. I recently checked inside the computer as one tutorial suggested to see if the first of 4 LED lights turn on when plugged in, and it does, meaning it's not power supply failure. The biggest problem with the whole thing is that is that the "unplug-then-replug"(sometimes upwards of 15 times) doesn't always work, and always seems to happen at varying degrees of inactivity depending on how long the computer has been off.
I've been doing this for 8 months, afraid to turn my computer off not knowing for sure i'll get it back on (which can take up to a day sometimes). And my resurrection methods seem to be more and more futile, as today and yesterday i've had no luck. LASTLY -- and this really confuses me -- I usually hear a very faint but rapid clicking noise when I plug in the computer (before I even turn it on, never happens when it's actually on) after its been unplugged for a while. The sound seems to be coming from near the bottom of the computer, so I cant imagine that it's that dreaded "Hard-drive Death" symptom (since the hard drive isnt even running).
Please, if you can, offer me some insight regarding these issues, I've looked everywhere and it seems I'm the only one having them! I'm almost to the point of gasp! actually finally going to the apple store and paying them to fix it.....

Hmm, the fan? How would I go about checking that? I want to try everything I can.
DEVELOPMENT: I got the computer on last night (using it right now)! I think it was off for almost exactly 24 hours since the last time I had it running. The most frustrating thing is that I don't really know what I did differently to get it to boot up again. That whole day I was just checking it about every hour or two, unplugging and replugging the power (at one point I opened the back and tried pressing those two tiny buttons under the fan, one is an internal power switch, and the other some sort of reset button, nothing noticeable happened with either, although the clicking sound that occasionally showed up hasn't reared its head lately). I think my computer is almost at its end, and now that its on I'm going to try my best to keep it running. One more slip into a coma and it might not make it out...

1st gen iMac G5 won't stay up but target

Similar Messages

Maybe you are looking for