1st gen iPad gone Dark
my daughter has an 1st gen iPad and the screen has recently gone black. Tried restarting but to no avail. HELP!!! I don't remember the last iOS but definitely no iOS7..
Hello there, Tinka2Adee.
The following Knowledge Base article offers up some great steps for troubleshooting issues with an iOS device not powering on:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Particularly:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.
Similar Messages
-
Updated 1st gen iPad, unable to access apps.
I recently updated my 1st gen iPad and my pictures and music seems to have transferred but none of my apps did. I can see them but cannot open them, they are dark in appearance as they look before they have completed downloading. I accessed the app store and was able to download a new app...
I plugged in my ipad and ITunes says "iTunes was interrupted while restoring the contents of the iPad. Would you like to retore this iPad again now?". I pressed continue restore and a message came up that says "An error occurred while restoring this iPad (-1)". Im not sure where to go from here, or how to "unsync" and "resync".
-
hello! i tried to install OS5 in my 1st gen IPAD (16gb) and it froze in the process. My IPad still runs normally (on OS 4) EXCEPT itunes cannot recognize, sync or even charge my IPad!
That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it... -
Is anyone else having issues getting a HD film (The Dark Knight Rises in my case) to transfer from my iMac to my 1st Gen iPad. Is it because I have an old iPad or am I doing something dumb?
Appreciate the help.
RegardsIn case anyone is interested I have solved it by downloading the film(s) on the iPad directly. I spoke with Apple to ask why this would be the case - didn't have the answer.
FYI.
Regards -
1st Gen iPad, can't restore on any computer
I was given a 1st gen 16Gb wifi ipad at work.
The ipad was functioning and I decided to restore to factory settings to clear our all the prior users info and be able to sync to my iTunes.
Seemed to be going well enough until I got to the screen that shows the USB cable with the arrow to iTunes...
now I can't detect the iPad on any computer so I can't complete the restore.
I've tried my late 2011 Macbook Pro with Mountain Lion fully updated, my 2007 Mac mini with Lion, my family PC with windows 7, and my work PC with windows 7. None of them detect the iPad being connected... the PC's don't show the device in "my computer" and iTunes on the Macs don't show the device.
All of the above machines can detect my iPhone, no problem.
I've tried 6 different cables of varying ages.
The iPad doesn't even make the connection bleep noise when plugged into a computer.. it does when plugged into a charger.
I charged it to 100% with the original 10 W charger.
I've gone through all the different techniques of holding buttons and such, but the bottom line seems to be I just cannot connect to a computer.
Could the prior owner have it so it can only connect to his computer and I'll have to restore from that machine?
Thanks for reading. I look forward to any further advice before making an appointement at the Apple Store.I had the same problem with my 1st gen iPad,(my iPad would not power up even when connected to the charger) I held down the home and reset button and "voila" my iPad powered up. I hope this helps someone in the same predicament
1st gen iPad won't power on, even when connected to the wall charger. Help, please! -
my ipod touch 1st gen has gone into recovery and wont restore because of a error 1 or something like that can someone help me quick this ipod is my little cousins and i dont want her mum to find out what happend
I have not seen a solution for error (1)
make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
How can I move music from my 1st gen iPad to my new 3rd gen iPad
How can I move all the music on my 1st gen iPad to my new 3rd gen ipad?
Transfer the music into iTunes on your computer and then sync the new iPad with iTunes.
Or download all of the purchased music on the new iPad. You can download the songs again for free in the Purchased Tab of the iTunes App as long as you use the same Apple ID that you used to buy the songs with originally. -
Is there a way to update 1st gen iPad past 5.1.1?
Is there a way to update 1st gen iPad past 5.1.1?
Yes but if I just wanted to get on the Internet I could have just bought a cheap tablet I can throw away when nothing works but Internet access. Wont b long and all the apps will b outdated. And it slower going through safari to access my outdated apps and not near as convenient. I was going to get an iPad air but I figure it will b almost useless in two or three years.
-
I received a 1st Gen IPad from a supplier as a gift to promote their products. They used their Apple account to load the apps. I am not able to load my own apps because their apple user is the one that pops up. How can I change it to mine?
Set it up as new device, explained in this article, without using the backup afterwards:
How to back up your data and set up as a new device -
I have a 1st gen iPad. Upgrade to IOS 6.1.1 appeared, but it quit shortly into the installing and has not come back up again. Both the iPad and when synced to the iMac, say i am fully up to date at 5.1.1! Has anyone had / got the same issue? How can I upgrade when it doesn't acknowledge there is no need?
You are most welcome
-
I have done everything I can find online to solve my problem, but I still have the same problem. My 1st gen iPad is not recognized in iTunes! Cannot sync! Please, any suggestions from anyone? Anyone else having the same problem?
Hello casinojen,
I would be concerned as well if my iPad was not recognized by iTunes. Thank you for providing all the information with the steps you took in regards to this issue. I found an article with a few more steps you can take (you can skip the steps you have already taken):
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M. -
My dad has a 1st gen iPad. He is 83 yo. I recently purchased an Apple TV for him because he loves Netflix and I told him that he could view his photos via the television. BUT, I'm not having success with Photostream. Help me.....I've been researching and trying everything I can and so far, no luck. He keeps asking about the photos, and I'm losing patience with myself and Apple TV. Can anyone help???? Thank you.
http://support.apple.com/kb/ht5209
http://support.apple.com/kb/ht4437
http://support.apple.com/kb/TS4215
Cheers, Tom
Oops!!!!!! Just realized Airplay & Apple TV requires iPad 2 (or later).
Message was edited by: Texas Mac Man
But there may be a way. http://www.youtube.com/watch?annotation_id=annotation_586623&feature=iv&src_vid= urjjHjJ0pdc&v=sSKQVxucnLY -
1st Gen iPad won't connect to my home router. EVER. Refuses to connect to my wifi.
HELP ME PLEASE WITH THIS 1st GEN IPAD refusing to connect to Wi-Fi ISSUE
It shows up as having full signal, and shows the name of our network. But go to Safari and try to go do anything and it spins and spins then tells me "Cannot Open Page...Safari could not open the page because the server stopped responding." Well...it never responded in the first place, so....
Apple says it works fine on their in-house system when we took it in. Told us to call Comcast. More than once, Comcast walked me through 20 mins of reconfiguring the router and the iPad and multiple phone calls and a trip to Comcast later...no go.They say it's Apple's problem now or that I have to buy a special Comcast technical support account for further help --- which doesn't guarantee anything....
This is rather BS to have this unusable thing for so long and now be expected to pay MORE money to get something like this working....and why won't anyone take responsibility? It cannot be that big a deal.
We now have been unable to use our expensive iPad for about 4 months or more. What the heck am I supposed to do? Throw it in the trash take the huge loss as a life lesson to not bother paying Apple prices for stuff that only works for a few months before some glitch or software issue makes it unusable without having to buy a new unit or pay someone to keep trying only to hear '...sorry, call someone else...'*
*Same thing happened with my perfecctly perfect dual G5 tower...motherboard burned out for no reason. Paid 1200 to replace that...then a year later the other main board fries...on a computer that barely ever got used...ended up having to literally give it away on Craigslist and buy a new iMac...which then made all my expensive music software and projects unusable. So I have about three years of special music project files sitting on a harddrive that will never be able to be used.
...I'm beyond frustrated since all we wanted the iPad for in the first place was to be able to check some websites and emails...help me help me.If the iPad works on other Wi-Fi systems then I'd have to agree that it is your own router causing the problem. To be sure take your iPad to a Starbucks or your library and a few other places than have Wi-Fi and test it out. If it works in those locations you'll need to talk to Comcast some more and be assertive. Something could have failed in your router.
Regarding your hard disk full of music. Put it in an enclosure and connect it to your Mac. Other World Computing sells all sorts of hard drive enclosures that you can install your drive in.
Computers can be frustrating but solutions are sometimes just around the corner. -
My sister gave me her 1st gen iPad to see if I could solve an issue. It won't turn on, and when it's plugged into a power cord there is a slow pulsing sort of flash that happens on the screen....any ideas?
Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe! Now see if it charges normally and after a period try to turn it on again. If the batter has been drained it could take 20 minutes or so for it to show that it is charging.
Also considering if the battery need replacing! -
Since updating my iPad 1st gen to iOS5.0.1 videos don't get loaded properly into the Videos app.
On the Summary page in iTunes of my docked iPad, I have always checked the box for "Manually manage music and videos".
I have my reasons for doing it this way, but that's for another thread perhaps.
The problem is that when I load a video to my iPad this way - by simply just dragging it from the desktop and onto the iPad, under Devices in iTunes - it copies/updates, and shows up on the iPad like it always has before iOS5. But now, with iOS5, when I undock, it can't be found anywhere within the Videos app on the iPad. The only way I can find it is to do a Search, which seems to find it, but when I click it, a different video plays - the first video in the Movies list in the Video app. Dock the iPad again, yes the video is there, according to iTunes, but no way to play it once iPad is undocked.
My suspicion is that with iOS5 you are no longer able to use the "Manually manage music and videos (Mmm&v)" that you will be forced to run everything through iTunes - and probably iCloud. I've unchecked the Mmm&v box, and get prompted with "Are you sure? - All existing content on the iPad will be replaced with content from your iTunes library". READ - "Rebuild your entire video and music collection, and this time run it all through iTunes. Welcome to iOS5. Have a nice day or two wasting your time rebuilding your entire video and music collection. Don't fight it. Use iTunes for everything! Until we finally make iTunes a decent piece of digital media management software, then you'll have to do it all again."
Okay, rant over - Anyone out there with running iOS5 on a 1st gen iPad with the Mmm&v option checked and able to load a video manually (not through iTunes)? Any other thoughts?
ThanksYea, i managed to fix my issue in a wild fashion way But I DONT suggest it to anyone.
I like to hear why it happened after upgrading iTunes and if there is any peaceful solution.
Bythe way, here is how i fixed it :
1-i checked "manually manage music and videos" checkbox and clicked on "Sync" button
2-It showed a threating message that it will erase my music and videos ,......
3-I clicked on OK button and let iTunes do any thing she said , but the second it started to delete my treasures from my iphone, i disconnected my phone by pulling USB cable.
Now i have my musics and videos untouched and got that Option enabled again and i can manage my Music/Videos and Books manually.
Maybe you are looking for
-
Writing file content on to mobile phone (need to specify the file name req)
Hi, I have a jsp page which i am trying to execute on a mobile phone. In this page i am trying to open a ServletOutputStream and using this i am trying to write some content on to the phone. But by default the file name is beeing given as the name of
-
Advice with a query to find Accounts with activities within a given period ONLY
Hello there, I am relatively new to Microsoft T-SQL and I was wondering if someone could help shed some light into a requirement I got... I have two tables in a database. One with accounts, and another with activities for such accounts. He is a simpl
-
why do I get and how do I correct the message _ This video is only available in the US - when I am in the US - I am trying to view Downton Abbey on my Ipad using the PBS ipad app.? Thanks for your help
-
Java Licensing changing installation number
Hi all, we have changed contract and moved a Netweaver Java installation into a new server. The license check fails since the hardaware is changed. I have asked a new license key but it does not work since the system was installed in a different inst
-
Is it possible to automate the extraction using spool command?
Hi, I am trying to export data from table to excel. But the result i am getting will be in million records. Till now i am manually extracting the data using plsql developer. but it is hampering my work alot when i am extracting. i am able to extract