1st gen iPod flashing screen

I have a 1st gen iPod.  When I went to connect to iTunes to sync and charge my iPod, iTunes does not recognize it and the iPod is flashing the apple logo.  Otherwise it does not power up at all.  It was used as recently as the night before with no issues other than needing to be charged.  Suddenly it appears to be dead.  Help! 

Yes. The screen in one model/generation iPod are the same.

Similar Messages

  • 1st gen ipod dim screen

    hey guys,
    i have a 5th gen ipod that i mainly use but i like to tinker with older ones. i just recently got a 1st gen missing its battery, my friend wired the battery plug-in to a car phone charger and used it for a little but then gave it to me. all it needed was a battery and fire wire(as far as i knew) but today i got a brand new fully charged replacement battery and when i plugged it in.the screen was so dim i didnt know it was on till i figured out how to activate the backlight. it was the wierdest thing, with the backlight on i could sorta barely see the text and with it off the screen looks off. im sure this isnt a five r problem but i was wonderin if anyone knew what this could be. PLEASE HELP!!!
    thanks
    tony,

    You can try the following but I suspect a hardware problem
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours. I would say not worth it for a 1G
    Apple - iPod Repair price                       
    A third-party place like the following maybe less. Google for more. Also likely notr worth it.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens         
    Replace the screen yourself if you are up to it
    iPod Touch Repair – iFixit                  

  • 1st gen ipod touch won't restore.

    I have a 1st gen ipod touch that I've been having minor troubles with (trouble syncing from time to time, album artwork is mixed up etc) and decided to do a restore. I followed the directions to the letter, and everything was working fine until after my ipod was wiped clean. Now the ipod shows up in itunes, but I can't access anything that I normally can. the ONLY option I have is to eject it. I'm really worried that I'll never be able to use my ipod again, which is kind of a big deal at this point. Help?
    -- I am running OS10.5.8 on my macbook.

    I'm starting to wonder if there's not some sort of issue brewing here. I had roughly the same thing happen to my 1G iTouch, though it happened gradually -- first, it wouldn't recognize the third-party car chargers I own, but worked okay on the computer. Then, after a couple months, iTunes stopped recognizing it. I had to do a complete restore to get it functioning again, and I had to restart/reboot the computer and the iPod, with nothing connected to the computer but the iPod, the keyboard and the mouse, and a totally clean re-download/install of iTouch firmware 3.1.2.
    Things worked fine for about a month -- until last night. I followed every troubleshooting step: reinstalling Apple Mobile Device Service, repairing permissions, powering down completely for 60 seconds, and disconnecting everything from USB except the mouse, keyboard, and iPod. It took about 9 tries before it finally went through with a restore.
    I unplugged it, used it for about an hour or so today, then tried to plug it back into the computer. It recognized it at first, but then flashed back and forth between the battery screen (showing that it's connected/syncing) and the regular wakeup screen (with the unlock slider), giving me multiple "failed connect" messages in iTunes. I'm about to start the whole rigmarole again, it looks like.
    Is anyone else having these kinds of repeated problems?

  • Frozen 1st gen ipod touch

    My 1st gen. ipod touch is completely frozen.  It is not even recognized when I connect it to itunes.  I have tried restarting it several times, but that hasn't helped.  When it restarts, it shows the red flash for battery charge, then goes to apple screen, then it stays stuck on apple screen - with frozen "timer".  Any suggestions on how to get this back??? 

    Try here:
    iPhone and iPod touch: Frozen and unresponsive

  • Can I use my 1st gen ipod touch as hard drive

    I have a 32 gb 1st gen ipod touch and I want to use some of it to store items/files that have nothing to do with itunes. How can I get this ipod as hd/itune device?

    There is no hard drive in an iPod Touch. But you can check out How to use iPhone/iPod Touch as Flash Drive on Mac.

  • 1st Gen iPod touch Keeps Having to Be Re-Registered with iTunes

    My 1st Gen. iPod touch works very well, with one exception. Every few weeks I'll turn it on and I'll get the picture of the cable and the iTunes icon - which is what you get the first time you use your iPod touch and means it needs to be registered with iTunes. This will happen both if I plug it in to my charger and when I just simply turn it on with the power button. I'll then take the touch to my computer and use my syn cable and plug it in. When the iTunes window comes up, on the left column it shows my touch, but the name I'd given it has gone back to the default name. I'll rename it again, but again within a week or two the same thing happens again. I'm stumped. I'm using an iMac running Leopard 10.5.6 and a white MacBook, also with 10.5.6. All my software on the touch, MacBook and iMac are up to date. I have very few apps on my touch and lots of room left on it to store stuff. Can anyone help? Thanks.

    Hi Brenda,
    That screen, with the iTunes icon and the USB cable, means the iPod is in recovery mode.
    This article: http://support.apple.com/kb/HT1808 provides more information about the mode and how-to use it to restore your iPhone or iPod touch.
    Are you using any 3rd-party accessories with the iPod touch?
    Does the accessory have the Made for iPod logo?
    Try restoring the iPod again, setting it up as a new iPod, and testing it without any 3rd-party accessories.
    If the issue persists, the iPod may need hardware repair. Just make a reservation to have a Genius take a look at it or call AppleCare.
    http://www.apple.com/retail/geniusbar/
    U.S. iPhone technical support: 1-800-MY-IPHONE (1-800-694-7466)
    -Jason

  • 1st Gen ipod touch no longer keeping time

    As the title says my 1st gen ipod touch no longer keeps time when I let it go completely flat. It keeps resetting itself back to the default time and date. Started happening in the last 6 months. I'm running IOS 2.2.1 never bothered updating to IOS 3 because of a known issue with the volume bar disappearing which I don't think had even been fixed. It hasn't been synced with the itunes for 2-3 years. The laptop with the itunes library for this device hasn't worked for a couple of years and haven't sync my ipod to a new computer due to some of the apps I used and some of my song/video purchases no longer being available and I don't want to risk losing those purchases if doing a factory resets not going to make a difference. Battery life for my ipod is still pretty good, get 3 weeks out of it when I leave it in standby mode using it for an alarm clock and about a week listening to music going to and from work only a few hours playing games or videos but that was never to great to begin with. My Ipod touch does have a cracked screen, but it's been cracked for the last 5 years. No other problems. Is else have this issue? Will factory reset make a difference or is it just something to put up with till my ipod touch dies?

    It sounds like the battery is really dying and does not have enough voltage to maintain the time when the iPod shuts off due to low battery.
    You can try restoring to factory settings/new iPod and see if that helps.

  • ANY radio app for 1st gen iPod touch?? Even with Wifi!?

    Firstly, I know the 1st gen ipod touch does not have a radio receiver..this is not my problem.
    I've been looking for an app that I can listen to the radio on..even through wifi...but am not finding any that will work with the 1st gen. For example, I download TuneIn radio which I have on my itunes, blackberry, and tablet...but it is only compatible with newer generations of the ipod touch. I am on version 3.1.3 which I believe is the most up-to-date.
    In short, I'm absolutely fine to use wifi to listen to the radio, but simply can't find an app (ideally a free one) that will even let me sync the app from my itunes to the ipod.
    Suggestions would be very welcome!

    Try my web app. I have over 100 stations of all genres. Just enter the following URL in Safari and tap on the orange music icon on top right. Also, you can add a Home screen app icon for easy future access.
      App URL: http://dave.merten.mobi/ 

  • 1st gen ipod grandaughter locked it and forgot code

    My granddaughter axed looked up a 1st gen ipod and forgot code

    - What is showing on the screen and what message did you get when you connected it to iTunes after placing the iPod in DFU mode. iTunes will tell you it found an iPod in DFU mode.  It can be trickiy to get it in DFU mode.
    - Placing ithe iPod in recovery mode, also tricky, will byspass the passcode and erase the iPod.  To place in recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    This program will also place the iPod n recovery mode.
    RecBoot: Easy Way to Put iPhone into Recovery Mode | Jaxov

  • Any 1st Gen iPod users out there? M8541

    All this talk about shiny new iPods has got me all nostalgic over my lovely old 1st gen scroll wheel model (M8541). Alas the hard disk died on that a year ago and it's been gathering dust ever since.
    I've been Googling trying to find others in the same predicament, and hopefully some details on how to obtain a new/refurbed hard disk and bring the old timer back to life. Alas, I've not got very far as yet, which either means my searching skills aren't up to much, or it's just way too difficult so no-one's succeeded.
    What I'd really like is to find some kind of flash memory with the same ATA-5 interface used by the original disk, so I can have something a bit more durable in there. I'm sure this must be possible and am hoping there might be someone out there who's tried the same or knows enough to convince me I'm wasting my time.
    I've found what looks like a viable replacement disk here :
    http://www.evertek.com/viewpart.asp?auto=14710
    Price is good too, though the part number is MK5002MAL-R where my original doesn't have the -R on the end, so not sure it's a drop-in replacement.
    Help, anyone?
    Firebook 1.67Ghz   Mac OS X (10.4.7)   1st gen iPod and Nano

    I have this model too. Is yours a 5 or 10 GB? Also, I you using it on Win or Mac? Mine is Mac but want to use it on Win.....is it possible to reformat it to work? I;ll see if my search skills can help ya find a new HD for yours.
    Thanks
      Windows XP  

  • Are AASPs allowed to charge customers that will qualify for the 1st Gen iPod nano recall?

    Are AASPs allowed to charge customers that will qualify for the 1st Gen iPod nano recall? There are no Apple stores in the Philippines, only AASPs. Early reports from customers claim that one of the AASPs is charging a 10% discounted price for the replacement. We need clarification from Apple if the AASPs are allowed to do this since this seems counter to what the replacement program is supposed to do. I will not name the AASP for now until I personally confirm the reports.

    There are no Apple stores in my country either, i went yesterday to one of those AASP but they didnt charge me or said anything about a price, just checked the screen, wheel and frame i guess to see if there was anything broken because they didnt turn it on. Confirmed the serial number, gave me a receipt and told me to come back in six weeks with the receipt to get my ipod back. I dont think they are supposed to charge you

  • 2nd gen iPod Touch - screen - contrast ratio issue?

    hello
    i was wondering if anyone else have this problem / issue
    what i notice in the 2nd gen ipod touch compare to the the 1st gen touch
    is the the differences in contrast of the screen
    1st gen ipod touch appears to be darker
    and 2nd gen ipod touch lighter or "washed out"
    the black in the 2nd gen doesnt appears to be black black, if anyone knows what im talking about
    and when comparing to the magenta or blue 2nd gen also appears lighter
    mind you i have set both brightness setting to FULL bright and NO Auto-brightness
    i can understand that there is off course difference in LCD but the difference is quite noticeable
    if anyone else have this issues please voice your concern I hope im not the only one out there.
    i would ideally prefer the screen contrast to be in between the washed out of my 2nd gen ipod touch and the 1st gen ipod touch
    and is there a way to fix it?
    cheers

    Well, I think it is fixed or I have gone the longest amount of time with the screen not going dim, no thanks to Apple.
    I went as far as trying to jailbreak my ipod and "downgrading" to iOS3. I got it jailbrokenm but could not downgrade to anything, so I went back to iOS4.2.1.  It actually worked worse while jailbroken, the screen never lit up.  The "fix" came about when I created a whole new library for the ipod, loaded a fresh download of iOS4.2.1 and took all of the extra apps off and so far the screen has been staying lit all the time.  the only thing i can think off was that there was something wrong with library file.  Now if Apple could come up with an easy was for me to have my ipod open the new library when connected istead of me having to do the Shift+click method, becasue I am not sure if it is safe to delete the original library file.
    Anyone having the same problem try creating a new iTunes library and copying your music files over, hopefully it helps you too.

  • HT1386 I just reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  Help!

    reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  I can eliminate any problems with the cable and connection.
    I've stopped and started the service, and also have performed cold reboots.
    Nothing seems to have helped the situation.
    Help!

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?
    The iPod Classic uses different drivers than the Nano

  • TS3694 Just took my 1st gen iPod out of it's original box, never used before.  Plugged it into my new Mac book Pro and it recognizes that the iPod is in recovery mode but when I click to restore, error 1611 comes up - but that error code doesn't say what

    I had an 8GB 1st gen iPod in it's original box in storage and just took it out to hook it up.  Charged it overnight, plugged it into new Mac Book Pro and it was recognized as being an iPod in recovery but other identifying information was all indicated as "n/a" (so, unknown OS, etc).  Error code 1604 came up so I downloaded iTunes on the Mac Book and it is currently showing version 10.  But now when I try to restore the iPod, error code 1611 comes up and the troubleshooting doesn't tell me what else to try.  The USB connector that came with the iPod was also never used before - brand new also from the box so that should be fine.  I also tried a different USB port on the Mac Book.  Any ideas?

    Error 1611
    This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.

  • Twitter App. for 1st Gen. iPod Touch

    I recently was having problems with the Twitter App. on my 1st Gen. iPod Touch and so decided to delete the app and re-download it again, like I had done a week earlier. During the download an error message popped up stating that I need ios 6 or later to download the app. Apple had updated the Twitter App on March 10th and I tried re-downloading March 14th, however a week earlier I was offered the opportunity to download an earlier version of Twitter. I am currently only able to use Twitter via Safari. Does anyone out there have a solution to get the official Twitter App. (And no "Buy a newer iPod stuff"!)
    Cheers
    ps IF ANYONE FROM APPLE MANAGES TO SEE THIS CAN YOU PLEASE OFFER THE OPPRTUNITY TO DOWNLOAD LATER VERSIONS OF APPS FOR 1ST GEN IPOD TOUCH

    Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
    App Store: Install the latest compatible version of an app
    Apple did not say why did not allow this option for iOS 3.1.3/1G iPod.
    Apple does not monitor these forums. To make a suggestion to Apple:
    http://www.apple.com/feedback/ipodtouch.html

Maybe you are looking for

  • How do I manipulate a URL to download?

    I have a URL (http://www.SomeImportantURL.com/getInfo?param1="foo"&param2="bar"&param3="bat") which, when I enter it into a browser, returns a download dialog. Using this dialog, I can (optionally) name the file, specify its save location, and then d

  • Unable to use RAS SDK for server-side printing for XI 3.1

    Hi all, I am using RAS SDK for server-side printing.  Here are my codes: ISessionMgr sessionMgr = CrystalEnterprise.getSessionMgr(); IEnterpriseSession enterpriseSession = sessionMgr.logon("Administrator", "", "cdi5boe", "secEnterprise"); IInfoStore

  • LsIsDate not checking for validity correctly

    I am sure this problem has come up before but I couldn't find any discussions on this forum relevant to it. Basically I am using a text field to enter dates and validating it using LsIsDate. The problem is that dates that should not be valid are pass

  • PLS-00302: component 'SET_NO_OUTLINES' must be declared

    Windows 2000 Server Oracle 10.2.0.1 upgraded from 9.2.0.1 IMP-00058: ORACLE error 6550 encountered ORA-06550: line 1, column 33: PLS-00302: component 'SET_NO_OUTLINES' must be declared ORA-06550: line 1, column 7: PL/SQL: Statement ignored IMP-00000:

  • What do I do if I forgot the answer to my security questions?

    What do I do if I forget the answer to my security question?