1st gen touch crashes with car chargers

I have a 16gb 1st generation iPod Touch. It has recently started crashing when I plug it into any car charger (I've tried multiple). When I plug it in, the screen will flicker static or weird colors, it will play static over the speakers if they're on, and then it'll crash. It then won't start for a couple of minutes, and when it does it is almost dead, regardless of whether or not it was fully charged before the crash. It still works fine when I plug it into a computer via the apple USB cable.
One of the cables I've tried is the Monster iCarplay. The iPod port I'm using when this is all happening the 30-pin port at the bottom.
My iPod is past warranty, so I'm not sure what to do or if its fixable. If no one has any ideas I'll most likely resort to buying a new head unit with a USB input for my car, and just never using the damaged pins. But any ideas?

there are a few websites that repair ipods all you do is ship it to them and they will let you konw what is wrong with it and give you the option of repairing or sending it back to you,i hope that helps.

Similar Messages

Win7 Not Installing Drivers for 1st Gen Touch

Hello folks,
I've been trying to get my 1st Gen Touch up and running in the most recent version of iTunes, installed onto a dual-boot machine (32-bit Vista and Win7). In Vista, the Touch works perfectly. Flip over to Win7, and no dice. I can hear the chime sounding that a USB device has been plugged in and removed, but at no point does any drivers actually install, no info pop-up that new hardware detected, and no iPod listed in the USB devices of Device Manager.
I've tried following the directives of http://support.apple.com/kb/HT1852 to no effect; everything looks to be in order. I've uninstalled and reinstalled iTunes. The only, and I mean only, sign of life I've seen out of Win7 is the one time I managed to fluke my way into Recovery Mode on the Touch, at which point it was recognized as a generic iPod in Win7. I just didn't think that a recovery wipe and reinstall would be a necessary step to a normal installation.
Further, I've also tried running the iTunes program in compatibility mode for Vista, and with Admin privileges for Win7 mode, to no effect. Does anyone have any ideas on what I'm overlooking? I know the hardware works; this has to be software...
Thanks!

I got it working, though the steps I had to use were draconian in measure, and not what I would reasonably expect the average user to endure just to get their iPods working. Since the Touch was showing signs of life in Factory Restore mode, I let it do that once. Wiped all the data out of it, but errored on the reinstall. Curious, I thought. I had Device Manager up at the time, and saw a generic 'iPod' entry in Portable Devices.
Okay, fair enough... I restart the factory restore, wait for the generic 'iPod' entry. Right-click, Properties, 'Update Driver', search automatically. Suddenly, lo and behold, the Apple Mobile Device USB Driver shows up under USB Devices, and my Touch starts working as pretty as you please. I'm fortunate that I can go back into Vista to re-sync to get my music and apps back, but at least it's working now. Might I suggest seeing if there's a less Nuclear Option process for accomplishing the same goal?

Can I attach a bluetooth device on my 1st Gen Touch.

Hi,
I am wondering if I could attach a bluetooth device on my 1st gen touch and then update my Touch to Ver 3 so that I can use the bluetooth features. Is this possible?
JV

Your friend installed an app that communicates with bluetooth devices? Please clarify.
No, his friend has an iPod video, which cannot have apps installed on it. His friend attached a Bluetooth accessory for using Bluetooth headphones.

Finding iOS2 Apps for 1st Gen Touch

So I've just got a hand me down 1st gen touch and I restored it as the easiest way to personalise it to be mine. The backup did not work so I've lost all the apps that were on it other than the iOs apps. When I go into the App Store on it to find new apps there is no apparent way to just view iOS 2 compliant apps. I'm tearing my hair out just trying to find a solitaire app.
Any suggestions?
BTW just made the sticky Home button much better with the alcohol trick.

There is no way to view apps by iOS version. And it's highly unlikely you'll find any that will work with iOS 2. I'd suggest you upgrade to iOS 3.1.3. See:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
You'll then at least have a chance of finding apps that you can run, though there are fewer and fewer as developers update to support the newer versions of iOS. Again you'll just have to look app by app. Looking in appshopper.com may make it easier.
Regards.

IPad 1st gen not syncing with pc windows desktop

IPad 1st gen not syncing with pc windows desktop

Try disabling a/v software and turn off the Firewall.
Disable antivirus software
Turn Windows Firewall on or off
iOS: Device not recognized in iTunes for Windows

1st gen touch - if i restore to factory settings will it still remain on v 3.1.3?

1st gen touch - if i restore to factory settings will it still remain on v 3.1.3? I seem to remember paying five ponds a few years ago to receive a software upgrade - will I lose it? (am wanting to sell it so need to erase stuff)

Yes. It will remain at 3.1.3

HELP w/ 1st Gen Touch - want apps!

I have a 1st Gen Touch (I think), anyhow, the current version it is running is 1.1.5. I am not able to put apps on it currently, and I'm pretty sure there is another version that allows me to do so.. However, my iTunes tells me that it has the latest version of software! HELP! Everything on-lines just tells me to do the normal check for upgrades, but it's not giving me anything, and I can't put any apps on it!

maybe this helps: [_*Purchasing iOS 3.1 Software Update for iPod touch (1st generation)*_|http://support.apple.com/kb/HT2052].
JGG

I have just changed my network provided and now i can't find my 1st gen airport express with airport utilities

Hi, can anyone help. I've just updated my network with a new hub and now i cant find my 1st gen Airport express with the curreent Aiport utilities.

From your description, it sounds like the AirPort Express was configured to connect to your "old" router or hub...and, to do that, the Express remembered the specific ID of that device as part of the connection credentials.
The Express is likely still looking for the "old" device for which it still has the settings to connect.
Since you changed to a new hub or router, the Express has no idea how to connect to this new device.
If this is the case......then the solution will be to reset the Express back to factory default settings....and then configure it again to connect to your "new" hub.

2 Part ? 1st gen touch&3rd gen touch

i recently shipped my 1st gen touch out for repair(new logic board,ouch)anyways it has not been used for about 6mnths should i install the latest update and will it work properly? i konw this depends on who you ask but any info will be helpful.2.can i install the apps i have bought for my 3gen on my 1st gen or do i have to buy them again? thanx:)

You can sync the apps to as many compatible devices as you like.
You can install the latest update if you like. Many apps will require the new update.

Transferring music TO a 1st gen touch

Plug 1st gen touch into PC and open itunes (v 11.1). How do I copy music files from my library to the touch?

iTunes 11 for Windows: Syncing overview
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad

1st Gen Touch Dead?

So my 1st gen Touch decided to just stop working. I've tried restarting/restoring, and the recovery process and nothing happens, completely black screen, it doesn't even show up on my MacBook, not even in System Profiler under the USB tab. Any ideas on how to fix it?

after some research, discovered that my Liquid Submersion Indicator had been activated (http://support.apple.com/kb/HT3302) which is probably the reason it isn't turning on. Didn't drop it in water or spill anything on it but I was pretty sweaty when it went down. Still looking into fixes, but it seems the Apple repair option is almost as expensive as getting a new one ($149.) Here's hoping the rumored 4th gen comes out soon.

1st gen touch won't charge with iphone cables...but there's more issues...

so i got an ipod touch off fleabay...tried charging it on the cable i charge my 3gs with, doesn't charge or even recognize it on my computer (nothing happens at all)...as far as i knew any older equipment would work on newer cables...is this incorrect?
to make things more confusing i bought a "first gen" touch data cable...it does nothing...no charge or recognition by computer...only way i've successfully charged the touch is to hook it up to an old speaker system or in my car to my pioneer touchscreen...but this doesn't help with putting any movies/music on it.
googling for hours results in tons of recommendations for getting new "high quality" cables or doing a restore on the ipod...so i did a restore and it's stuck in the "connect to itunes" mode now...but still isn't recognized by either of my computers...
any suggestions are greatly appreciated. i'm about to throw this thing out the window lol

anyone?

Ipad 1st gen keeps crashing since 5.1

My 1st gen ipad keeps locking up and then rebooting to the apple logo since updating to 5.1. It doesn't seem to matter how long the device has been in use, there is no pattern in terms of which apps are being used. I've reset to factory in itunes and restored from a back-up, took several tries because ipad kept rebooting while trying to transfer purchased items to itunes. Finally got those to complete and then performed the wipe and restore. Issue persists. Occasionally screen will go "crazy" before crashing producing oddly colored rectangles all over the screen. This usually requires a manual hard reset (sleep and home button for 10 seconds) before reboot will occur. I heard this may have something to do with multi-touch navigation so I turned that off. No difference. I've noticed a trend towards certain apps causing this more readily than others (mail app, moog anology synth app, snyth x app, all of the korg apps, beatmaker 2, etc), but it doesn't seem to really matter. Basically things that worked without issue ever, are suddenly locking up or rebooting my ipad. Right now it rebooted while trying to terminate apps running in background (a grand total of 3), which is something I do rather religiously to free up memory. Some crashes are just a black screen that wont go away unless a manual reset is performed.
I use this device quite extensively for the music apps (which at this point is also a rather hefty dollar investment in and of itself), but the crashing issue is out of control. Is there a way to downgrade the device to 4.3 or even 5.0 (I had zero problems with 5.0 oddly enough) without jailbreaking it?
I'm willing to admit (begrudgingly) that this could be a hardware failure and I'm SOL. I'd like to be able to at least try another version of iOS to either confirm or deny that is the issue.
Just did the rainbow rectangles of death again, manual reboot, automatic reboot, lock to black screen, manual reboot, and now it says the battery is empty ,but it was just at 80%. *** is going on with thing?

I ended up doing that the other day. I was told that there was an error in updating the firmware to iOS 5.1 and that it wasn't rewrite-able and not fixable. I was further told that there is probably a problem with the dock connector which probably caused the update to write data intermittently. Additionally I was told that as I didn't opt for apple care, my 1 year warranty expired 1 month 2 weeks ago (I bought the iPad 13 1/2 months ago), and that a replacement would be over $250 and a decent amount of wait time, which because of contracted work load I can't afford to miss out on I couldn't wait the time it would take for shipping.
I have two real problems with what I was told: 1. I didn't use the dock connector to update the iOS, I did that wirelessly through the settings app. 2. I was told Apple's iOS update broke my previously fully functional iPad.
I ended up replacing it with an iPad 2 16gb wifi model, which they insisted they didn't have, but actually did. In my choice of either white or black. There was a real strong push for me to drop $500 for an iPad 3 without much consideration to the fact that I did that just over a year ago.
Lesson learned on my part, if I didn't need that apps I've already purchased that I use to generate income, I'd be done with the iPad forever.

IPod 1st Gen (Touch wheel, 10GB) isn't recognized - missing software?

Recently, my 80GB video iPod decided to simply die on me, so I dug out my very first iPod, from 2001 or '02 I believe.
It turns on fine, can scroll through menus, but there's nothing on it anymore - plug it into my computer (firewire-to-firewire), and the iPod goes through a menu where there's the disc and a magnifying glass and eventually a check mark (connotating that everything's fine) - but it never docks onto the computer or shows up on iTunes.
I've SCOURED the internet for old iPod software updates, trying to find one early enough, so it can recognize it and I can restore and hopefully the problem will be fixed - but there's been SO many iPods since then, it's ancient, and no support was found anywhere.
Does anyone have a solution, or a link to the earliest of iPod updaters? I looked for documentation, but it was 9 years ago - I don't have the CD anymore or anything. Any help would be greatly appreciated.
*In the 'About' menu on the iPod, the current version that's installed is 1.5 - don't know if that matters.
**I'm trying to connect to a 15-inch PowerBook G4 (Aluminum?), currently installed with iTunes 8
Message was edited by: Cassidy Knight (still)

The current version of iTunes should be able to connect to even the 1st gen iPod. The one you have is 2nd gen, if it's the one with the four clicking buttons around the touch wheel. I have one of those, and although I use it as my little emergency/maintenance FireWire startup drive (because the screen failed on it), it is still recognized by iTunes on my Mac. Over FireWire, of course.
The first thing you should try is to put it into Disk Mode.
http://support.apple.com/kb/HT1363
Note: The procedure for your iPod is at the bottom, where it says +If you have an older iPod model without a Click Wheel+.
If that works, connect it to the computer. Hopefully it will appear both on your desktop and in iTunes. If so, use the Restore button in iTunes to erase the iPod's hard drive and initialize its software. The latest available version of the software for that iPod will be installed.
You may also want to try a different FireWire cable. It's just a regular cable, so you don't have to use the thin white one.

Power button not working on 1st gen touch

I bought my iPod Touch 1st gen from currys, it was an ex-display. It came with 1 year warrenty, but we cannot find the receipt. I was told by someone if I take it to the Apple store they can fix it without a receipt? My closest apple store is birmingham, any help is appreciated.

It was bought in april, it was an ex-display came with the one year warrenty but we don't know where the receipt is. Can't it be taken to the apple store without one?

1st gen touch crashes with car chargers

Similar Messages

Maybe you are looking for