1st Generation iPod (5GB) not working with new iMac

Hi,
i have the Problem, that my 1st generation iPod is not detected by my new imac (20'' 2,4 Ghz). When i plug in the firewire cable, nothing happens. DiscUtility sees no disc at all.
But when i plug in the iPod "behind" another Firewire disc (acting as a fw-hub), the iPod ist detected within a second, and everything works fine.
I just wanted to know if someone else is having this Problem, or if someone else has a working iPod 1.Gen on the new iMac.
Thanks
Joerg

Hi JvdL,
I am one with a 1st gen iPod (Windows, 10GB).
But I have no problems with it and I also don't have a last gen. iMac.
However, in the iPod Forum http://discussions.apple.com/category.jspa?categoryID=151 and in the iTunes Forum http://discussions.apple.com/category.jspa?categoryID=149&start=0#threads there are quite some threads with similar problems.
Sorry
Stefan

Similar Messages

Ipod does not work with new usb

i got my computer cleaned and a usb 2.0 pci card put in and now my ipod does not work with it, can anyone help

tell me what you mean and i will tell. i ask the guy in the shop to remove any viruses and put my files in order and also put winzip on, ad-ware se peronal and windows defender. and to install a usb2.0 pci card, so that i can put music onto my ipod faster. is this enough for you

Why my 1st generation nano earbuds not working with 6th generation nano?

Hi there,
I had a 1st generation iPod Nano and Apple just replaced it with a 6th generation nano, however the earbuds jack of my 1st gen does not fit all the way into the 6th gen, it leaves a tiny bit outside and I couldn't push it all the way in, though I could hear sounds through the earbuds. Is there anyone out there that experience this? I thought the earbuds connector is universal.
Also, I'm not sure if this is related to the earbuds not fitting all the way in. My new Nano shuts itself off about 1 minute or 2 after I turn it on, I am thinking it may think there is no earbuds connected to it, could this be why?
Thanks for any help!
Ray.

Push harder, the headphone jack on the 6 is very tight when new.

3rg gen ipod dock connector not working with new imac on leopard 10.5.1

Recently found that my 3rd gen ipod is not working properly when i connect it using its dock. itunes just freezes and comes out with some "disk insertion error". however, when i don't use the dock and connect the ipod to the imac directly using its own firewire cable, everything is ok and working properly.
it seems to be the ipod dock that is the problem. but am wondering why wouldn't it work? any ideas? I'd still like to be able to use the ipod dock...
thanks.

ipodaid.page.tl go there, he got my iPod fixed.

Logitech Pro 4000 not working with new Imac 24"

Just migrated from a G4 to the new Imac 24"
Cannot get the Logitech Pro 4000 to work with new mac.
Contacted Logitech and they said
"please note that the QuickCam Pro 4000 currently only supports up to Mac OS X 10.2.6"
However,the cam DID work ,even under 10.4.8 with the old G4...
Any ideas people..
Thanks!

Your nwe iMac is Intel based, which is why the old driver failed/ You could try the driver from IOXperts. They do not mention Intel support, but they do list your camera, and have a free trial.
<http://www.ioxperts.com/products/webcamx.html>

Isub not working with new imac

the help menu is telling me to make sure that the isub is plugged in, and then to make certain it is selected under sound preferences... the only problem is that the imac is not picking up that the usb is even plugged in- there is no isub option that comes up on the sound preferences.
the isub works fine on my older mac, but just is not being read on the new one. any guesses other than my old isub is obsolete with my new imac?
thanks
-pd

The iSub is sweet! It's the best sub I've ever had! There's no reason for it to NOT work with the new Macs. It's a bummer. I still have my iSub, maybe they'll start supporting it again someday.

Will 1st gen ipod touch still work with new itunes library on new computer (transfer didn't work from old computer)

Ok, so I have a new computer and wanted to transfer my itunes library from my old computer. I could not get the files to transfer. I downloaded the newest version of itunes and see that I can download my previously purchased music to the new computer. I have mp3's that I can add in on my own so I don't have a problem starting over in itunes.
My question is what happens when I plug in my 1st gen ipod touch and try to sync??? Will it erase what is on my ipod or will I be able to move the stuff from my ipod into my new itunes library?? Any info would be great...I'm happy with how my ipod is set up so I really don't want to mess with a good thing. Also, will I need to update and of my software on my ipod since it's 1st generation??
Thanks for the help!!

You can only sync to one iTunes library/computer. If you do sync the iPod is erases and its contents replaced with what is in the iTunes library of the second computer.
To avoid that see:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
Yes, the 1G works with the latest iTunes.
To transfer iTunes purchases:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
In iTunes 11 use Control+B to show the Menu bar then go to iTunes>File>Devices>Transfer Purchases

New iPod Touch not working with G3 iMac

I got a new iPod Touch (4 gig) for Christmas. Tried plugging it into my iMac Power PC G3, and I get an error message. ( error OxE000001). Is my iMac too old to work with the iPod touch?
Also as a second issue, I have a wireless network, but I don't have it broadcasting it's name for security. When I turn on my lap top, if it doesn't automatically find the wifi network, I just type in the network name, and it pops up.
Any way to do this with the iPod Touch? (Type in the network name, even though it's not broadcast)
I'll also list this question on the WIFI section.

Ken;
I AM running with iTunes 9.0.2. in my slot loading G3 iMac. There is no special Hack.
You tried to help me earlier, when my G3 just would not work after I upgraded Safari and iTunes. I ended going to the Genius bar, where they worked on it for hours to get it going again. They installed earlier versions of both programs.
I was going to keep it that way, until I was given an iTouch for Christmas. The iMac just did not see it. I was resigned to updating my iTouch through my son's iBook.
In a question I had about upgrading my wireless network, John Galt said his 500mhz G3 worked OK with the iTouch. Over two weeks I slowly installed what he had, (or close to it) I think Safari has a G3 version, that I may have missed when you were helping me.
The last thing I upgraded was iTunes 9.0.2. After three or four tries, and plugging in the iTouch USB cable directly into the iMac, the iTouch was recognized! It seems to work fine over the past week or so.
Some odd things I have to live with. When I plug in the iTouch, iPhoto will start and ask about downloading pictures from the iTouch. I have to manually start iTunes if it is not already on. It does not automatically start like it does with my iPod nano.
Also I did not realize how slow this machine is, I thought down loading a CD through a La Cie DVD/CD player at 1.3x speed was fast. My son's iBook downloads a CD a 9 x speed! Oh well... slow but steady.....

Old second generation ipod shuffle not working with itunes

So i recently found a old ipod shuffle 2nd generation but could not find the charger/sync cable so i found a usb to audio jack. i pluged everything in correclty but it saids the usb connection is an unknown device and itunes doesnt connect it or reconize it in devices so will i have to buy a seperate charger/sync cable or do anything to make this one work .
thanks

Hi Luke,
If the iPod is not showing up in iTunes or being recognized by the computer you may want to follow the steps in this article -
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Thanks for using Apple Support Communities.
Best,
Brett L

IPod Mini not working with new car stereo

I just got a 2007 Sienna in which the audio system includes an AUX port for connecting to my iPod. However, when I connect the two (using a RadioShack Gold Series audio dubbing cable recommended by RadioShack), nothing happens. My iPod is not locked, and it works with headphones and also through the FM transmitter (although the latter not very well at all).
Is there an iPod setting that I am missing? Do I have the wrong cable? Is there a problem with my car's audio system?
Any advice/suggestions would be very much appreciated.

Doh. Never mind. I just figured out it was a volume problem.

External DVI monitor not working with new iMac 27"

I recently purchases a 27" iMac and i'm trying to get it working with a 3rd party DVI external monitor. I got the Apple mini display port (thunderbolt) to DVI adapter and connected everything via a new DVI-D cable. The iMac detects there is a monitor and even shows the display as it should.. however, the monitor has a large amount of static/snow/noise (red coloured), so much so that the monitor is unusable. There is also a considerable amount of flickering.
The monitor works fine when connected to a Mac Mini with the Mini DVI - DVI adapter, (old set up) so I know the monitor's connection is not faulty.
Also, the monitor connects fine to the iMac when using a mini display - VGA adapter. The problem really seems to be with the combonation of DVI cable and adapter.
Has anyone had any experiences with DVI monitors connected to new iMacs via the thunderbolt port?
(System: iMac 27" 2011, 3.4GHz i7, 16GB RAM, Graphics AMD Radeon HD 6970M 2GB. All system updates installed, running OSX 10.7.2)

I think that your assessment is right, the ATI must be on for DVI to work (so far I've only tested with an older T61p and the Quadro graphics are always running). Can't you set the machine so that when docked the ATI is used, but on battery the internal video is used? That would be what I would try.
T61p, T400
formerly x23, x40

Lightroom not working with new iMac

I just got a new iMac and I imported everything from my old computer using time machine but now lightroom does not work at all. Does anybody know what has gone wrong? All that comes up when I open the program is a grey screen and it does not respond with anything I click, including selecting a catalog.

You need to actually install LR, not let Time Machine transfer it.
If you purchased the regular (non-CC) version of LR, then download the LR 5.3 update from http://www.adobe.com/downloads/updates.html
If you have a PS+LR subscription, then click on the Lr icon after logging in at http://creative.adobe.com/products/ If CC thinks you have LR already installed, then you may need to install the www.adobe.com version, uninstall it, log out of CC, reboot, log back into CC, and then try downloading Lr from CC, again.

HT1175 3TB time capsule not working with new iMac

I have a 3TB time capsule that's c. 2 years old. It worked perfectly with my old iMac. I bought a new 27" one when it came out this year and since the time capsule will not work.
I had to clear all the data as a starter. Now it gets a little into the backup taking c. 1 day then resets. It's connected via ethernet cable and has been told to join an existing network.
Currently it says it's backing up 922,498 items, after 2 hours (this is the third attempt, it resets then has no record of the old backup) it says 10kb of 789.44 GB - About 4,664,440 days remaining!!
To clarify I'm trying to use Time Machine with the Time Capsule.
Please help!!

You have made a mistake in the setup.
You do not "Join an existing networking" and use ethernet.. they are mutually exclusive.
What you are doing is backing up over double hop wireless which is slowing to a crawl.
You need to put the TC into bridge mode.. and plug it into the main router by ethernet. Then use wiretess to the TC if you are too far away or ethernet if you are close by..
As soon as you put the TC into join a wireless network it deactivates the ethernet.

2nd generation iPod touch not working with docking station. Any solutions?

I've recently purchased a Philips micro music system (DCB2020) and whenever I put the iPod on the dock, it makes the connection sound but won't play music when I select the dock function. I've tried an iPod nano and that works so I don't think it's a problem with the docking station. My iPod touch is 2nd generation and has 4.2.1 software update. Does anyone have any idea how I could make the iPod compatible with the docking station?

OK, Then sometmes this works:
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store and bring the dock.
Apple Retail Store - Genius Bar

Option Key for Boot Camp not working with New iMac Keyboard

Hi, I own a early 2006 Intel iMac. Recently, my wife complained that the keyboard was getting dirty. Basically I think she liked the new keyboard on the new Aluminum iMac better. We purchased it back in August and everything worked great. Oh I also had the beta version of Boot Camp installed. Everything worked great, hold Option down on boot and could choose which OS to go into.
Fast forward to now, purchased Leopard and love it! Decided to wipe the system and do a fresh install. Everything is installed (Leopard, Boot Camp, Windows XP) and working great, that is except when I press and hold the Option key at start up. If I have the new keyboard installed, the Option key does not bring up the boot manager. However if I plug the original keyboard in and hold Option, it works!!!
Ok I could see a problem if the new keyboard was NOT an Apple product. But it is and frustraiting as I can use the control panel to choose. This is a long round about method and does not make a happy wife with me. HELP!
Jhan Jensen

Thanks for the info! I was about to call myself and I may still do so. I am hoping if Apple gets enough of these calls then maybe it will spur them on to get it done sooner. (Apple are you listening) I will do the same with the KB swapping, she will be happy at least she can still use the new keyboard. She types a lot and has be really happy with the new keyboard and its response.
Thanks again for the help!!!
Jhan

1st Generation iPod (5GB) not working with new iMac

Similar Messages

Maybe you are looking for