1st Generation iPod problem - folder icon/exclamation!

Any help would be appreciated. I have a 1st generation iPod and it has worked fine since 2002. The battery seems fine and have had no problems with it until yesterday. When I connected my iPod via firewire to my Mac, iTunes wouldn't recognize it. Then, I tried to reconnect the firewire cord and still nothing. So I went with the 5 "R's" . I tried to reset it, then that's when it started. The apple icon came on and then the folder icon + !. I then went through all 5 "R's" and it never did reset or restore or anything. Any combination of buttons I push on it, I get the apple icon for a couple of seconds and then the folder icon + ! and then it goes blank. I can't put it in disk mode or anything. It does the same thing every time. I don't think it's the battery b/c it was charged and the charge time was still very good. anyone with any history on this may be able to help! THANK YOU!

I'm not sure about not sync'ing properly, but plug in your earphones and your volume bar should re-appear.
Maybe if you give more info on what's happening when you try to sync, someone will be able to offer more assistance.

Similar Messages

  • Ipod Problems: Folder Icon

    i got my 30gb 5G ipod for Christmas and i have had a few small problems, But this is the worst, When i connect my Ipod to my Windows PC it resets itself, Shows the folder icon and then turns off. Ive trawled the support with no avail.The Ipod Updater Freezes when my ipod is connected, no responce from that. Any ideas?

    Did you check out this page? "iPod shows a folder icon with exclamation point when you turn it on" http://docs.info.apple.com/article.html?artnum=61003
    Also you could try deleting and reinstalling the updater.

  • 1st Generation iPod (5GB) not working with new iMac

    Hi,
    i have the Problem, that my 1st generation iPod is not detected by my new imac (20'' 2,4 Ghz). When i plug in the firewire cable, nothing happens. DiscUtility sees no disc at all.
    But when i plug in the iPod "behind" another Firewire disc (acting as a fw-hub), the iPod ist detected within a second, and everything works fine.
    I just wanted to know if someone else is having this Problem, or if someone else has a working iPod 1.Gen on the new iMac.
    Thanks
    Joerg

    Hi JvdL,
    I am one with a 1st gen iPod (Windows, 10GB).
    But I have no problems with it and I also don't have a last gen. iMac.
    However, in the iPod Forum http://discussions.apple.com/category.jspa?categoryID=151 and in the iTunes Forum http://discussions.apple.com/category.jspa?categoryID=149&start=0#threads there are quite some threads with similar problems.
    Sorry
    Stefan

  • 1st Generation Ipod touch  keeps crashing/going into stand by mode 3.1.3

    I have a 1st generation ipod touch that I recently restored to the newest firmware 3.1.3. My problem is that after this restore and subsequent restore attempts is that the device keeps clicking off to a black screen when I use wifi or transition from different desktop screens. The device does not completely crash as once the screen goes black I can hit the home button an slide to unlock. I have found that if I disable wifi this problem does not occur. I have tried to both reset and restore with no success. Any suggestions or ideas?

    If a restore did not help, I'm afraid you have a hardware issue there.
    Basic troubleshooting steps.
    Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
     MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

  • Where is my 1st generation ipod nano replacement?

    I sent in two 1st generation ipod nanos that qualified for the replacement program. I received one two weeks after I sent both in, through fedex. I'm still waiting for the second one, and it's been 3 months already. The website said it takes up to 6 weeks. I haven't received any emails or messages relate to this problem. Fedex received both ipods and I still have the receipt to prove it. What's going on?

    I called apple and tried to find out what happened. Turns out everything was going smoothly until it reached their end. I tracked it with fedex and it said it was delivered to a city in california. The guy I was talking to said apple would get back to me in a couple of days, because they, "have to set up an investigation". It's been a week and 3 days. I'm a big apple fan, but this whole situation is really disappointing.

  • 1st generation ipod nano question

    Hey everyone,
    i have a what i believe is a 1st generation ipod nano ( it's blue )(??) and i had it connected with itunes on another laptop ( windows based ). That laptop died and i recently purchased a new MacBook. So i tried to connect my ipod to the Macbook today but i can't seem to get it to work, i have purcahsed a bunch of songs through itunes that are on the MacBook and i'd like to add them into my ipod.
    Is this possible? or because i used my ipod for an older computer am i not able to put the existing songs on my ipod into my MacBook and vice versa, MacBook songs onto the old ipod???
    Any help you can give would be great...
    Thanks!

    I have an actual 1st generation ipod and am having a similar problem. I had a windows based laptop, which my nano worked on. When I bought my iMac in December '07, I reformatted my ipod to use with my mac. After restoring my ipod, I added some songs and used it for a few days before I got a message telling me that I must restore my ipod. I don't know why the message appeared, but I connected my ipod and restored it again. After that, however, my Mac no longer recognized my ipod in Disk Utility, iTunes, or Finder. I've tried using other Macs, no luck, Windows computers (which actually recognize that something is connected, but it doesn't know what), but nothing seems to work. My ipod turns on fine, I can do everything except add/remove music. It will charge if I plug it in, the entire menu system works. I've done the all the tests in Diagnostic mode and everything seems to be fine, but it still doesn't work. >.<
    Any help will be greatly appreciated.

  • 1st generation iPod touch-screen stays black

    I have a 1st generation iPod touch, but it's impossible to turn it on. I've tried pushing the home- and lock screen-button at the same time, and I've tried charging it, but the screen stays black. What else can I do?

    Try here.
    iOS: Not responding or does not turn on
    You may have a dead battery or other hardware problem.

  • 1st generation iPod Touch

    Hi guys..
    I'm having problems by adding apps to my 1st generation iPod Touch, because all of the games are for newer versions of iPod Touch...
    Can I upgrade it somehow? Or is it neccesary to buy a newer generation of iPod Touch and just throw the other one out?
    Please let me now what to do?

    see [_*Purchasing iOS 3.1 Software Update for iPod touch (1st generation)*_|http://support.apple.com/kb/HT2052].
    JGG

  • 1st generation ipod freezes

    My 1st generation ipod was in the middle of playing a song and then froze.  Now, I can't get it to play and I can't get it to shut off.  It seems none of the buttons are responding.  The battery is charged.  Help, please

    Wow!!
    THANK YOU, Kenichi!!!
    Yes, based on your comments, it seems to be a REAL Gen 1st iPod.  The scroll wheel does actually turn, but it does work to a dock connector.  I have no idea what a FireWire port is, I am afraid.
    And I am a REAL 51 year old woman who was given this as a gift and have NEVER touched one of these devices before!!!   LOL!  I am stuck in a late 1990's technical arena on several fronts, so it is a bit overwhelming since I have so much to catch up on.
    You helped me tremendously.  ☺
    Before reading your message, I poked around a little.  Just on my own instincts, I connected the iPod to power even tho the battery indicator showed fully charged.  I read a little on the APPLE website to get a general idea of where to start.  It sounded like I needed to reset the iPOD similar to "hard-booting" a computer.  When the iPOD had been connected for about 45 mins, I pushed the MENU button and the FORWARD button at the same time and held them for 6 to 10 seconds.
    The light/APPLE icon displayed along with the start MENU.
    Progress!!!
    I will let you know if this worked.
    Thank you again for your help.
    Lori

  • Why won't my 2010 MacBook Pro recognizing my 1st generation iPod Shuffle?

    My 2010 13" MacBook Pro does not recognize my 1st generation iPod Shuffle. Do I need software? Is there anywhere I can go to download it?

    Hi all -
    I cannot view my flash drive OR my office server, which I should be able to connect to via VPN. VPN was installed on my Macbook Pro at my office on Friday. It worked fine. Now I bring it home, and I connect using VPN, and it shows that I am connected, yet the server hard drive icon does not appear on my desktop (as it usually did) and I can't see how to access the server at work.
    I also cannot view flash drives when I plug them in - they just don't show up.
    I had Norton installed; I read online I should disable that. I did this, and no luck. I also have already done all the things suggested on this post and have all the boxes checked, and yet, still cannot use a flash drive or access my work server.
    I am stuck? Do I have to bring my Macbook pro in for service? I have NOT upgraded to Mavericks.
    Thanks for any help.
    I am not that well versed in finding my way around a Mac - so keep any explanations simple, please.
    L

  • I need help with getting an update for my 1st generation ipod shuffle.

    I am trying to install iTunes and iPod software on my computer but the iPod cd is apparently not compatible with my version of windows. I need to download an update but I cannot get any support because my 1st generation iPod shuffle is not one of the selections available for support. Does anyone know how I can download the update I need?

    Neil, I installed itunes but that hasn't helped the issue I am having with my 1st generation iPod. I have searched and searched but there is nothing that allows me to update my iPod, download to my iPod, all I see is iPhone or iPad, neither of which I happen to own, so I am still at square one with my problem. I can't get any Apple support because my iPod is not one of the choices, no mention of the 1st generation. It's as if it no longer exists and there is no support available. I tried plugging it into my usb port, hoping that something would pop up on the screen and give me guidance, but alas, that failed as well. I feel like this whole thing is an exercise in futility.  Thanks for your attempt to assist me.

  • HT1719 why doesnt my 1st generation ipod shuffle appear on my devices on itunes?

    Why doesnt my 1st generation ipod shuffle appear under my devices on itunes when i plug it in? i have windows 7. I got the ipod today from a friend with their music. i deleted their music and added my own to the folder it was in. but when i unplugged it i still had their music and none of mine.

    You need to restore the Shuffle in iTunes first. Then sync all of your music stored in iTunes over to it. Or is that what you did?
    B-rock

  • My 1st generation iPod shuffle will not allow me to sync any podcasts onto it...what do I do?

    My 1st generation iPod shuffle isn't letting me sync my podcasts even though they can play in iTunes

    I did recently move to a new NetGear wireless cable voice gateway router (CG3100) and this is when the problems started
    In order for the AirPort Express to "join" the wireless network provided by the Netgear router, you need to know exactly what type of wireless security settings that the Netgear is using.
    Unless you provide the Express with the exact information required to join the network, you will continue to see error messages after you click Update during the configuration.
    The message about the "settings have been successfully stored" is a misnomer. This tells you that the settings have been saved, but not if they were the correct settings.
    You will know that you have the right settings about 40-45 seconds after you click Update. If the light turns green, your settings are correct.

  • ITunes & iMac do not recognize 1st generation ipod shuffle

    My 1st generation ipod shuffle does not show up in either the desktop or itunes. It does however light up the orange or green light when connected to the computer.
    It also seems to knock out the usb connection that it was plugged into. After I unplug it I try to put the keyboard in the same usb slot that the shuffle was in and it does not work. But it does work in other usb outlets. I reset the PRAM and NVRAM and then the all usb connectors work again.
    Also, to add to the confusion I have 2 first generation ipod shuffles. The other one works fine.
    I cannot restore the shuffle because I can not see it anywhere.
    Is there anything that can be done?

    Here in Brazil if the technicians solve the 1418 iPod problem with "magic softwares" provided from Apple just for assistence services, they are charging the iPod users about U$40.
    But if the problem is classified as a hardware problem, and if its under warranty, they give you another new or a refurbished (yek!).
    If its not under warranty, you can have your iPod and pray for fix...
    Is it fair that a problem probably cause by a software provided from the own manufacturer should be solved by Apple's costumers? I dont think so...
    Do you any idea about what can we do?

  • 1st generation iPod making computer shut down since Tiger

    Dear Gang,
    I need some help. Since upgrading to Tiger, my 1st generation iPod now makes my PowerMac G5 shut down the second I put it in the firewire port on the front of the computer.
    Anyone else had this problem? Any advice?
    TIA,
    Mark

    Anyone?
    Bueller?

Maybe you are looking for

  • In 10g read text files

    i am not able to read text file in 10g forms. using webutil.pll and webutil.lib here i posted the code . i am not getting message 2, client_text_io.fopen is not working what could be the reason. DECLARE in_file client_TEXT_IO.FILE_TYPE; V_LINE_COUNT

  • .avi animations made with Flash won't work on my mac laptop (version 10.6.8) ...

    .avi animations made with Flash won't work on my mac laptop (version 10.6.8) but they used to. What is the problem?

  • No sound in PE 7

    I have no sound while working with video or .wma files. My audio meter shows sounds, but noting out my speakers. I search the forums and tried everything that I can find in them to no success. I have also tried reinstalling and that didn't correct th

  • Install 9iDS in corporate network

    We are planning to deploy 9iDS to 300+ users (developers) in our company. We usually do installations in the lab as client-server where we package the client settings in a file and then distribute it through the system to all targeted users and PCs.

  • Question about db link

    Hi all If the target server's IP change, do I have to re-create DBlink in Host server? or I just change IP on tnsnames.ora ?