1st Generation iPod Touch & Smart Playlists

My 1st Generation iPod Touch will not sync my Smart Playlists. After syncing, the Playlists appear under my iPod touch in the iTunes 11 sidebar. On my iPod Touch all songs/tracks for the playlists load into the iPod's library and can be accessed. Playlist names however either do not appear on the iPod or the ones that do appear may be empty. I've used these same Playlists for many years and have only recently started seeing this. I have done a full restore of my iPod Touch, the OS software is up to date and I've tried creating new Playlists with the same results. Any suggestions would be appreciated. 

That symptom is one of those covered here:
iPod touch: Hardware troubleshooting

Similar Messages

  • The Genius playlist and the 1st Generation ipod touch

    I am just wondering, is the genius playlist ability not available to the 1st Generation iPod touch or does it only work on certain songs?
    Because it would be really annoying if they limited to the 2nd Generation iPod touch only.

    Another post here said to just go ahead and resync your iPod and it should start working. And it did for me. If that does not work make sure that genius is enabled on your iTunes, otherwise it will not add the functionality to your iPod.
    Hope that helps

  • 1st Generation iPod Touch No Longer Recognized by Windows 7 PC

    I have a 1st generation iPod Touch (no camera) that can no longer connect to my Windows 7 pc. Plugging in the iPod via USB does not trigger any sort of dialog box in Windows and it doesn't trigger a message saying a device has been connected; the iPod does not show up in either iTunes, Computer, Device Manager or Devices and Printers, either as an Apple mobile device or an unrecognized device, and does not charge when connected to USB (though the wall-charger still works). As far as my computer is concerned this iPod does not exist. I had successfully synced this iPod as recently as one week ago and am ready to pitch the thing in the garbage if I can't find a solution.
    I have the latest version of iTunes as well as the most up-to-date Windows updates. I have already followed all the steps listed here (iOS: Device not recognized in iTunes for Windows) multiple times with no success.
    I also have tried following the instructions listed here (Re: For those Windows users who suddenly cannot see their device in iTunes. Here's a solution that has worked.) but this also hasn't worked since the iPod isn't recognized in the Device Manager and I am not given the option of updating the drivers, manually or otherwise.
    I have uninstalled/re-installed iTunes and all related Apple services multiple times. The Apple Mobile Device Service is functioning normally. iTunes diagnostics indicate that there is no device connected no matter what I do. I have reinstalled my Windows USB drivers and changed the settings on the USB Root Hub in the Windows Device Manager to disable power saving options.
    I have tried connecting the device to another PC which detects and syncs another apple device (iPhone 5) with no issues, and had the exact same result: the computer doesn't even recognize an iPod is connected.
    I can't update the Apple Mobile Device Drivers because the device is not recognized by my machine in any way.
    I even completely reset my iPod and that just left me with a unactivated iPod that still isn't detected.
    I am really unbelievably fed-up with the useless "try checking your USB cable"-style advice that people seem to offer on this forum. If anybody has dealt with this issue and has any serious advice other than "re-install iTunes," it would be much appreciated.

    You said "I am really unbelievably fed-up with the useless "try checking your USB cable"-style"
    - Did you try another cable?
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    Try on another computer

  • 1st Generation Ipod touch  keeps crashing/going into stand by mode 3.1.3

    I have a 1st generation ipod touch that I recently restored to the newest firmware 3.1.3. My problem is that after this restore and subsequent restore attempts is that the device keeps clicking off to a black screen when I use wifi or transition from different desktop screens. The device does not completely crash as once the screen goes black I can hit the home button an slide to unlock. I have found that if I disable wifi this problem does not occur. I have tried to both reset and restore with no success. Any suggestions or ideas?

    If a restore did not help, I'm afraid you have a hardware issue there.
    Basic troubleshooting steps.
    Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
     MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

  • 1st Generation Ipod Touch not recognized by Itunes 10.3

    Just updated Itunes on my PC to the most recent version.  My 1st generation Ipod Touch is not recognized now.  I get an error message 0xE800000A.  Looking for suggestions.  Thanks!

    Try here:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

  • 1st generation iPod touch-screen stays black

    I have a 1st generation iPod touch, but it's impossible to turn it on. I've tried pushing the home- and lock screen-button at the same time, and I've tried charging it, but the screen stays black. What else can I do?

    Try here.
    iOS: Not responding or does not turn on
    You may have a dead battery or other hardware problem.

  • 1st generation iPod Touch

    Hi guys..
    I'm having problems by adding apps to my 1st generation iPod Touch, because all of the games are for newer versions of iPod Touch...
    Can I upgrade it somehow? Or is it neccesary to buy a newer generation of iPod Touch and just throw the other one out?
    Please let me now what to do?

    see [_*Purchasing iOS 3.1 Software Update for iPod touch (1st generation)*_|http://support.apple.com/kb/HT2052].
    JGG

  • 1st Generation Ipod Touch 32GB

    I have a 32gb 1st generation Ipod Touch. It was a gift purchased at the Navy Exchange(military store). The sound has gone out. I can no longer hear any music. Is it worth trading in for a new
    one at bestbuy? Or can the sound be fixed.
    Everytime I place new headphones theres no sound.

    http://www.bestbuytradein.com/bb/QuoteCalculator.cfm?level=1&value=180 this will tell you in estimated trade-in value once you complete it,
    As a former employee of Best Buy my opinions are my opinions, and not those of Best Buy.

  • 1st generation ipod touch Software issue

    I have a 1st generation ipod touch (software version 3.13). When I attempt to update the software, it says that the software is up to date.  Can I manually force an update or is there something else I can do?

    Nope. 3.1.3 is the highest possible for a 1st gen.
    Stedman

  • 1st generation ipod touch will not turn on after being charged

    1st generation ipod touch got a white screen and then after that when charged it will not turn on. Does anybody know what happened or how I can fix it.

    That symptom is one of those covered here:
    iPod touch: Hardware troubleshooting

  • 1st generation ipod touch ios update

    does anyone know if apple has fixed the ios update for the 1st generation ipod touch yet? my update is only 1kb in size and always errors one download.  any suggestions?
    Thanks its much appreciated.

    yes. at least the link i was sent a few months ago took me to apples ios update for version 3.1.1,  I am currently running 2.1.2.  I paid for the update and apples page says it should be 250 MB in size, but the update i recieved was only 1kb an errors every time itunes tried to download it.

  • Why isn't the new iOS4 update compatible with the 1st generation iPod touch

    It makes me extremely angry that i have wanted what the new update contains ever since i got my ipod and now I can't have it because whoever made the update didn't make it compatible with the 1st generation iPod touch. Ig someone could give me a good reason as to why this happened that would be much appreciated.

    Doesn't have the needed hardware in particular not enough RAM.

  • Ios 3.1.1 will not download for the 1st generation ipod touch

    Why won't ios 3.1.1 download for the 1st generation ipod touch?  It will start and then a second later stop.

    Does it happen with the apps that came with the iPod?
    Does it happen with all apps you have downloaded/installed?
    Have you ried deleting the apps and redownload/install the apps?  You will not be charged again if you are signed into the same iTunes account that originally purchased the apps.
    Next would be to restore from backup
    Last would be to restore to factory defaults/new iPod.

  • How do you get apps for the 1st generation iPod touch

    How do I get apps for the 1st generation iPod touch?

    By updating the iOS on the iPOd.  The 1G can go as high as 3.1.3.  That works with a lot of apps.  But some apps require a higher iOS and/or newer iPod.
    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

  • I have the 1st generation ipod touch i installed an update which now it is 3.1.3 version i was able to put my apps on it but when i want to use the apps it will not let me use them. what do i need to do?

    I have the 1st generation ipod touch i installed an update which now it is 3.1.3 version i was able to put my apps on it but when i want to use the apps it will not let me use them. What do i need to do?

    Does it happen with the apps that came with the iPod?
    Does it happen with all apps you have downloaded/installed?
    Have you ried deleting the apps and redownload/install the apps?  You will not be charged again if you are signed into the same iTunes account that originally purchased the apps.
    Next would be to restore from backup
    Last would be to restore to factory defaults/new iPod.

Maybe you are looking for

  • Upgraded LV7 to 8.2.1 and List Folder pattern does not work anymore as it did

    Hi I have upgraded LV7 to 8.2.1 and use XP. In a vi developed in LV7 I used the List Folder with pattern input to check wether a file name already exist in a folder  (path). This worked very well in LV 7 as the function return the filename if the exi

  • I have two fields and I would like the 2nd field to display the word "Error" if the number is smalle

    I have two fields and I would like the 2nd field to display the word "Error" if the number is smaller than the number in field 1. can any one help?

  • Photoshop not detecting OpenGL?

    Sometime early yesterday I realized that one of my partitions had suddenly disappeared--along with the 300 gigs of space allocated to it. Rather than search high and low for a reason or a solution to the problem, I decided to just perform a clean fac

  • I cannot connect to guest network.

    Hi My Guest network looks OK inTC, but just hangs when I try to access it from my iPhone. Also my TC screen seems 'blocky' when redrawing and there is no screen with stars! I'm on Yosemite with a new TC and a new iMac 27" Please can anyone help? Ive

  • Syntax highlighting in basic editor

    First of all. Thanks for finally upgrading the forum software. So far it looks like it works much better than the former version. However I'm not totally happy with the basic text editor. There is quite a lot of code posted in these forums. Is it pos