1st generation Touch -Does it qualify for OS4.1

Does the 1st generation qualify for the OS 4.1 upgrade? Itunes id's it has 2.2 and that it is current.

"iOS 4 offers new features for iPod touch (2nd generation or later)."
http://support.apple.com/kb/HT4205
You can purchase 3.1:
http://support.apple.com/kb/HT2052

Similar Messages

1st generation Touch. Apple still stock these for battery replacements?

I am aware that apple replaces the entire device for poor battery life for a service charge $79. Does this still apple for a 1st generation Touch? I have a 16GB Nano, but the battery only last a few hours.
Does Apple still keep these in stock?

No way. $59 is too cheap. You need to buy it for more. You can sell your device here:http://www.gazelle.com/
And you can buy a new one (2nd gen) here: http://www.amazon.com/gp/offer-listing/B001FA1NZK/ref=dp_olp_refurbished?ie=UTF8 &condition=refurbished
or
http://www.amazon.com/gp/offer-listing/B001FA1NZK/ref=dp_olp_used?ie=UTF8&condit ion=used

My 1st generation touch says cannot connect to youtube

My 1st generation touch says cannot connect to youtube, does anyone have a answer for this?

it used to connect some time ago. the error message says "cannot connect to YouTube. i can connect to safari and when I try to go on youtube from safari it says "Safari can't open this page because the address is invalid
if I am in youtube after i say ok to the first message then I press on one of the videos it starts loading the movie and an error message come up saying "error playing movie"

1st Generation 2 Gbyte Motherboard Replacement for Model No.A1137 needed, please...

1st Generation 2 Gbyte Motherboard Replacement for Model No.A1137 needed, please...

Quote from: vernonion on 27-August-08, 09:51:53
Everything is not working fine, and a pop with sparks is not a normal result from turning on a power supply. If you got it from Tiger send it back and get this one.
I talked to the rep earlier, but I had to go to a meeting. When I called him back he said he was on the phone with Intel to make sure my CPU would work with that board. I know it will work so I have no clue why he called them. He didn't seem to concerned about the PSU though. I told him that the PSU popped and made sparks and it didn't phase him at all. I already told him I wanted to exchange the RAM with different kind and I wanted a new PSU. When I give him the new RAM and the PSU I want I will give this one a try.
Thank you for your help.

Lightroom 4 does not qualify for creative cloud 29.99 price?

Can someone explain why the Lightroom 4 product does not qualify for the discounted 29.99 membership for creative cloud?
Offer available to all registered users of individual products and suites, CS3 or later.

Lightroom is not considered a Creative Suite individual product. Same for Photoshop Express and Premiere Pro Express.
The wording on the full promotional terms from the link at the bottom of https://creativecloud-specialoffer.adobe.com/special-offer/ is: "This offer is only available to customers who own a Creative Suite edition or individual product, version CS3 or later (CS3.x, CS4, CS5.x, or CS6)..."

1st generation touch home button does not work

What are my options and what is the best option for 1st genernation touch on which the home button does not work? Otherwise functions perfectly. Thank you.

Apple will exchange it for a refurbished 1G for:
$149 for 8 GB
$199 for 16 GB, and
$249 for 32 GB
not worth it for yor old 11G
Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix

Voltage for charging 1st generation Touch?

I have a 1st generation iPod Touch, 16gb. I have a car charger/transmitter I bought off eBay, which plugs straight into the m-bus plug of my Alpine head unit, and then I had to wire it into power. Lately when I plug my iPod in, it will work fine for a while. Then the screen flickers, it shuts off, and either stays off or reboots. Sometimes it'll be fine after happening once, and sometimes it'll happen over and over. I found out the voltage of the car charger is 12v. Is this too much for the 1st gen? I'm not sure if the 1st gen is supposed to have 12v or 5v. If it's the correct amount, what's happening? Thanks.

Jakemmarsh wrote:
Okay, so if I buy the 12v output to 5v output converter, it should stop surging/crashing my iPod? Just making sure before I buy it.
This is the adapter, by the way:
http://cgi.ebay.com/ebaymotors/KENWOOD-KNW-USB-AV2-12V-5V-CHARGING-ADAPTER-iPOD- iPHONEW0QQitemZ270517346108QQcmdZViewItemQQptZCar_Audio_Video?hash=item3efc171f3c#ht_2 045wt1165
Thanks again!
I can't answer that question as I have no idea what you currently have. Sorry!

How to upgrade First Generation Touch to use Remote for Apple TV

Hello and thanks in advance.
Can anyone tell me how to upgrade the OS for a 1st Generation iPod Touch so that it can use the Remote App from I tunes to control the Apple TV device. It needs to be the 3.1.2 version, but Apple seems to offer only 3.1 I found the 3.1.2 version on a non-apple site and attempted to download and install it but it didn't work out. (Error 14). I was expecting to control the TV with my 1G Touch and am a little disappointed with Apple that the older Touch units seemingly cannot do this. Any help appreciated.

You can buy 3.1 thru iTunes then use it to upgrade to 3.1.3.
http://support.apple.com/kb/HT2052

IPod 1st Generation Touch- System Restore from Recovery Mode

My iPod Touch 1st Generation worked fine one day and the next day all it would do is disply the little white "Apple" and then go black. It was fully powered. I opened my Itunes account and connected the iPod. Nothing. Then I saw on a previous discussion board to hold the power and home button at the same time while hook to my computer. A graphic of the usb cord and Itunes appeared, and the Itunes account recognized the device but said it was in "Recovery Mode" and in order to have it work again I would need to allow for a system restore. So I did. It seemed to go through the process and then tried to re-sync. It has now been "syncing" for over an hour. It is stuck. I can not do anything, even if I disconnect the iPod from the computer. I have no idea what to do, I am super frusterated. My iTunes account seems to be locked and have not made any progress with the iPod of getting past any other graphic other grapic besides the usb/iTunes picture. Please help if possible.
Also, since it is a 1st generation, I recently upgrade the OS to the only allow upgade however, I am not sure which one it was. This is the first problem I have had with my iPod. Apologize for the lack of specifics.
Thanks much in advance.

Close iTunes and disconnect the iPod from the computer. Reboot the computer. Then try to restore again.
- Try as necessary:
- A reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Placing the iPod in
Recovery mode
- Placing the iPod in DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Both those modes require that you turn the iPod fully off. If you can't do that let the battery fully drain. After charging for at least an hour try the reset.and restore again.
- If still not successful time for an appointment a the Genius Bar of an Apple store.

1st generation Touch & Apple earphone+mic remote

I have a 1st generation iPod touch. Will the Apple earphone/mic/remote work with my 1st generation iPod?

Conal Ho,
Yes and no my friend, they will work for listening to audio. However the mic and remote won't work. If you go to the compatibility parts on the following links you will see such:
http://store.apple.com/us/product/MB770G/A
http://store.apple.com/us/product/MA850?intcmp=AIC-WWW-NAUS-BUYNOW-FOOT-INEARHEA DPHONE-080910
Hope that this helped with your issue.
Message was edited by: westongallagher

1st generation Touch question

Will Apple still provide software updates for the 1st Generation iPod Touch?

There is nothing wrong with the 1st gen ipod. It works as it should. The software works.
What "support" do you need?
How long do you think that a product should get updated features?
This doesn't seem like anything new or unusual at all.

IPod Touch 16GB 1st Generation - touch screen area stopped working

Hello there, the last 2 days I'm experiencing a problem with my 16GB 1st Generation iPod Touch. One cm under the top of the touch screen and for about 10mm height, the screen is not functioning. I noticed this when I was on the AppStore and tried to buy an app. Exactly at the "Buy" button and on full width the multitouch screen doesn't work at all (touch/scroll/zoom etc.). I use OS 3.0 and I've installed it from my PC with the latest iTunes. I use the latest OS since it's release day and only yesterday the problem appeared.
The iPod is protected with silicon case since day 1, also has a screen protector and it's never dropped, scratched or anything that could cause this problem. I believe the problem/bug/dysfunction it's software related, even tho, I've restored the iPod erasing all it's data to the factory settings with the last OS, the problem remains.
Do you suggest me to downgrade back in version 2.0 and see what happens? Do I have to to downgrade to version 1.0? Please advise cause here in Greece the service doesn't exist as in the rest European countries and as in the rest of the world who has official Applestores.
I use both Mac and PC with my iPod Touch, so you can suggest solutions for both platforms. (Leopard/Vista)
I'm waiting for a response as soon as possible, thanks in advance and please advise me as an experienced user
The iPod Touch is bought from US and brought here in Greece on January 2008. It's the iPod with the January Update in case you're wondering.
Thanks for your time,
Vangelis Makridakis.

Seems that the problem isn't software related.
I've downgraded to 2.2.1 from 3.0 and nothing happen.
I can't buy apps from AppStore, I can't join a WiFi network and much more...
Apple made *faulty digitizers* (touch screens) cause as I've searched on the internet, many others have the same problem. Since it's out of warranty, Apple is covered... BUT customers should know that even if they don't drop their device or if they protect them, no matter what, one day they won't be able to touch some random areas of their screens.
As a customer _I demand answer_ and also a replacement program for faulty digitizers since will be confirmed that the customer never dropped or scratched the faulty device.
Also, since in Greece (where I live) we don't have Apple official representation as the rest of the European countries, I probably will have to pay A LOT to Rainbow S.A for a digitizer replacement and also to wait about a MONTH to get my device back.
Thank you Apple for making perfect products with the chance becoming lemons instead of apples.
Vangelis.

Exe created with Report Generation toolkit does not work for all users

I created a exicutable with the report generation toolkit and it only works with some of my users. I use microsoft 2007 and anyone that has microsoft 2007 my exe works well. Most of my users that have microsoft 2010 are able to use my program as well. However, there is one user with 2010 and Windows 2007 that cant get my program to work.
Any suggestions for troubleshooting this?
Thanks

The most likely issue is due to the fact that Microsoft changes the ActiveX object model of Office for each version of Office. The Report Generation Toolkit does a pretty good job of handling this, but it is not 100% effective. Search, for example on the "Set Cell Border" function and you will see what I mean. In these cases it's up to you to handle this issue. How you handle it really depends on your situation. For us to provide a more concrete answer you will need to provide further details, such as what toolkit function is "not working" (whatever that means), and who you "users" are. Is this an internal distribution? Are you selling this program? Is this code written for a project with a specific customer?

1st Generation Touch

I still have the 1st generation iPod Touch and was wondering if someone can recommend a mic so I can use Skype to make phone calls?
Thanks

http://discussions.apple.com/thread.jspa?messageID=10193672
and many other threads on the topic.
Regards.

Can I make calls using Skype on 1st generation Touch?

Hello - I have a 1st generation iPod Touch with current software. Can I use the earphones with microphone on this generation to make calls on Skype?
Thanks!

Hello Kate,
To make calls from your cellphone please see here:
http://www.skype.com/intl/en-us/features/allfeatures/skype-to-go-number/
Moved to "STG".
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

1st generation Touch -Does it qualify for OS4.1

Similar Messages

Maybe you are looking for