1st time Authentication fails
Hi,
I am using 5508 controller and having 2 SSID configured
Data - for data users Authentication is [WPA2][Auth(802.1X)] hitting data VLAN
Voice - for Android and other voice users authentication as [WPA2][Auth(802.1X + CCKM)] hitting Vocie VLAN
now my question is when ever I try to connect from my laptop to Data - 1st time itself I get the IP and join to network, but where as when I try to connect to Voie SSID from phone or from laptop, authentication prompts for 2times and after entering the username and pwd 2 times it gets connects.
can anyone tell me why its asking 2 times for authentication.
Please check on ACS what is the reason given for the first authentication failure.
Similar Messages
-
I have updated my Iphone 3 but unable to start it. It takes too much time on Authentication and than message appears that Authentication failed
I don't know either its jailbroken or hacked otherwise.
It was working properly before I have updated it through Itunes to update the OS. After the updation, this message occurs
Authentication failed, please try after few minutes
Please help -
I have devices loaded but new devices keep getting this error "Authentication failed on device 3 times. Failed to detect SSH version running on the device. PRIMARY-STARTUP config Fetch Operation failed for TFTP" - which trying to get configurations. I am using LMS 3.0.1
I tried to TELNET on devices via Putty port 22 no good. Please help?
Name Version License Status Size CiscoWorks Common Services 3.1.1 Licensed Not applicable Campus Manager 5.0.3 Purchased 1500 CiscoView 6.1.7 Licensed Not applicable CiscoWorks Assistant 1.0.1 Licensed Not applicable Device Fault Manager 3.0.3 Purchased 1500 Internetwork Performance Monitor 4.0.1 Purchased 1500 Integration Utility 1.7.1 Licensed Not applicable LMS Portal 1.0.1 Licensed Not applicable Resource Manager Essentials 4.1.1 Purchased 1500Showing 1-1 of 1 records
Go to page:
of 1 pages
Device Name
SysObjectID
Model
Device Status
Inventory Status
Inventory Last Updated Time
Config Status
Config Last Updated Time
1.
R2020012_01
.1.3.6.1.4.1.9.1.576
Cisco 2811 Integrated Services Router
Normal
Success
Jan 13 2011 10:43:49 EST
Failed
Jan 13 2011 10:37:24 EST
Rows per page:
20 50 100 500
Go to page:
of 1 pages -
Since we upgraded our WCS system to V6.0.196.0 we are receiving a lot of the following error messages and I haven't figured out why.
Client 'c0:cb:38:3f:a1:0d (anonymous, 0.0.0.0)' which was associated with interface '802.11a/n' of AP 'ACAA01-00.P04-G2C2.1' is excluded. The reason code is '4(802.1X Authentication failed 3 times.)'. - Controller Name: 205-dg20-bb3-4/2Check you ACS (Radius) logs under failures. You will see why its failing. Sounds like a AD account went bad
or someone is entering the wrong logon ... But check your radius log it will point you in the right direction. -
Clients cannot connect: "Reason:802.1x Authentication failed 3 times. Reas"
As of 1:30 yesterday, no clients can authenticate to my LWAPP Access points. I'm getting this message in the trap logs on my 4404:
Client Excluded: MACAddress:00:90:4b:86:23:94 Base Radio MAC :00:17:df:7f:c8:60 Slot: 0 Reason:802.1x Authentication failed 3 times. ReasonCode: 3
And my (MS IAS) RADIUS server has an entry:
Authentication-Type = EAP
EAP-Type = <undetermined>
Reason-Code = 66
Reason = The user attempted to use an authentication method that is not enabled on the matching remote access policy.
The previous successful entries all refer to PEAP. We restored our WCS server from tape yesterday, but why would that affect the authentication on the 4404? Does anyone have any idea what's going wrong?There is a command line syntax which will also allow you to export and import an IAS config to other IAS servers. Then you will be sure they are identical...
http://support.microsoft.com/kb/883619 -
WLC Client excluded - web authentication failed 3 times
Is there any more I can do with the following? The customer only has 4400 controllers and WCS' both on the highest firmware currently available...
An example of the alert generated in the event of an excessive authentication failure is as follows:
Client '08:60:6e:35:7c:29 (172.16.235.133)' which was associated with interface '802.11b/g/n' of AP '25CS-AP21-24SE' is excluded. The reason code is '5(Web Authentication failed 3 times.)'.
E-mail will be suppressed up to 30 minutes for these alarms.
I need clarification of the following so that a process can be put in place to show if it is possible to deal with potential threats/attempts to hack into the network as the customers security are not accepting notification only. Therefore please advise:
- What does ‘excluded’ mean in this scenario? Is the client permanently excluded or only temporarily?
- If the client is not permanently excluded - if there are multiple occurrences of this alert for the same client can the client be disabled via the WCS console?
- If necessary could e-mail suppression be turned off - for this alert only?
Hope you can help but I think they need Prime and ISE to satisfy their security concerns myself!
BR
RockfordThere is a command line syntax which will also allow you to export and import an IAS config to other IAS servers. Then you will be sure they are identical...
http://support.microsoft.com/kb/883619 -
SAP Business One Integration Services Authentication Failed
Dear ,
ALL SAP forum members,
Iam Using SAP Business One 8.81 PL 06, Micorsoft SQL 2008 R2
In SLD B1DI and JDBC, the connections were tested successfully.
Whenever I log into SBO, I am getting "SAP Business One Integration Services Authentication Failed" error message. I did extensive research on all possible SBO documents dating 1 year back especially in B1ic Troubleshooting Document (New and Old) and searched the length of the SBO forums, but I could not a solution.
I uninstalled and reinstalled the B1f package many a time. The integration services we re also restarted many times and the connections were all tested successfully. Firewall, AntiVirus also checked.
In the B1f, in the Monitoring Window, the login is "Ok" but the AuthCheck is "Failed". I checked Authent.Monitor->Authentic Info and I found the following message under Action message "Wrong Usrname and Password".
I debugged and i found again "/com.sap.b1i.vplatform.scenarios.authen/sap.Xcelsius/Authenticate_Check.bfd
But could not understand much of it.
But i could go no further. The experts are requested to suggest their solutions, If any, to me as Iam stuck in this phase for the last 3 week
I hope some experts will guide me over this issue
Thanks and regards
Ashish GupteHi Konstantin Ryahovsky
Thanks for your reply. My problem is solved.
And frankly speaking i dont know how it was solved. I have not uninstall, install ,not even i had restarted the server also.
only change i did in SLD >> Maintainance >>> cfg Runtime >>>> Put server IP address instead of server Name and restarted the services.
Thanks & regards
Ashish Gupte -
Toshiba EXCITE Pro - WIFI connection. Authentication failed after update
Hello.
Just received this Tablet.
Everything seemed ok while updating to the latest version (did that first to solve the heat problems).
After the last update *i lost my WIfi connection. Authentication failed* (didnt change something - was connecting - updating ok 1 minute before the last update).
After that i started testing ,Wps connection , No security Wifi etc etc.
*Finally at a random time (and with the initial settings) i got connected*. After i shut down the tablet the same problem occured.
After doing the same things again i finally got connected and this time it seems to be ok, even after i shut down the tablet.
However this is frustrating.
Maybe you have to sort this out?
I have seen and other people returning this tablet after having this problem.
It is not a hardware problem since its working ok before the update.
Of course tried factory reset twice.
Hope i dont have this problem again, *but i am informing in hope that you fix this in a future update.*Toshiba sent me the fix for this. Figured I would use Facebook and they sorted a solution straight away.
It requires a complete reset. Not the soft reset from within Android.
I'll post it here as they will check through moderation I guess.
Thanks for sending a private message Ben. For us to get this resolved for you we would advise to perform a reset from the Android system recovery menu, to do the reset please follow these steps:
The reset process will delete any data, settings, and applications on your tablet. You must have a backup of any data you wish to keep before proceeding.
1. Make sure the tablet is off and not in standby.
2. Hold down the Volume Up and Power buttons simultaneously until the two Android icons appear.
3. Use the volume buttons to select the white box on the right.
4. Once selected, press the power button.
5. Use the volume buttons to select wipe cache partition and then press the power button.
6. Select Yes and press the power button.
7. Use the volume buttons to select wipe data/factory reset and then press the power button.
8. Select Yes and press the power button.
9. The tablet will now reset.
If you have any issues after the reset please get back to us as soon as possible!
Its been working well ever since. I guess the cache clean part might be the main one. You'll have to select the reboot yourself as I did at the end.
Might be best to use Facebook i'll see if I can find my post as the response was quick and efficient unlike their responses in here. I.e nowt from them so far.
They needed my name and serial numbers probably to log problems etc.
Message was edited by: bensimmo -
My current softward is: Mac OS X Lion 10.7.5 (11G63)
When I attempt to use the Filezilla connection wizard I get the following message:
Connecting to probe.filezilla-project.org
Response: 220 FZ router and firewall tester ready
USER FileZilla
Response: 331 Give any password.
PASS 3.7.1.1
Response: 230 logged on.
Checking for correct external IP address
Retrieving external IP address from http://ip.filezilla-project.org/ip.php
Checking for correct external IP address
IP 27.0.19.56 ch-a-bj-fg
Response: 200 OK
PREP 52470
Response: 200 Using port 52470, data token 1871898076
PORT 27,0,19,56,204,246
Response: 200 PORT command successful
LIST
Response: 150 opening data connection
Response: 503 Failure of data connection.
Server sent unexpected reply.
Connection closed
When I attempt to login Host/Username/Password myself I get the following message:
Status: Resolving address of amyhoney.com
Status: Connecting to 184.168.54.1:21...
Status: Connection established, waiting for welcome message...
Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
Response: 220-You are user number 12 of 500 allowed.
Response: 220-Local time is now 04:05. Server port: 21.
Response: 220-This is a private system - No anonymous login
Response: 220 You will be disconnected after 3 minutes of inactivity.
Command: USER 5475****
Response: 331 User 5475**** OK. Password required
Command: PASS ********************
Response: 530 Login authentication failed
Error: Critical error
Error: Could not connect to server
Now before anyone points out the obvious: my username and password are correct. I've already gone through changing them so I know they are.
Additionally, I've pretty much tried EVERYTHING I've read online, from messing with "terminal" (and subsequently the FTP and STFP options) to changing the sharing options and turning on file sharing/remote management as well as just turning off my Firewall completely.
Now I've used Filezilla before when I first published my site and everything worked fine. My site is published through Wordpress so most of my editing was done through simply logging into my "wp-login." I recently changed the theme and in order to change the header image in that theme I have to do it through my "wp-content" folder, which means I need to use Filezilla. I feel like a complete moron right now considering I've had my site for about a year and can't even doing something this simple.
I've read that the newer version of Lion/Mountain Lion don't support automatice FTP anymore, which (as I mentioned prior) I attempted to fix through Terminal. However, nothing I do seem to do works.
Can someone walk me through fixing this? And I do mean 'walk me through'. I'm not a tech-savvy nerd who knows all the lingo, I just know the basics so sorry if my ignorance offends you.
HELP!!First be sure login and password are OK. Sometimes the address starts wit "http://..." and sometime starts with "ftp://...". Try both normal FTP access and Scure FTP access (SFTP). At the end, contact the site's provider.
-
OBIA 7.9.5 EBS Integration Not Logged On nQSError 43001 Authentication Fail
Hi,
I'm attempting to get Oracle Business Intelligence Applications 7.9.5 / OBIEE 10.1.3.3.2 integrated into the eBusiness Suite 11.5.10.2 per Metalink Note 552735.1. At the moment not an action link, just menu option to SA Administrator.
I've run into and worked around a number of problems with the Initialization block variables setup in OracleBIAnalyticsApps.rpd and now no longer get errors in the NQServer.log after disabling Initialization Blocks for Siebel/Peoplesoft and disabling 2 EBS specific Init blocks that were erroring; 'Inventory Organizations' and 'Ledgers' I'll fix those later.
However, now I get an error in the sawlog0.log file as follows:
File: project/webodbcaccess/odbcconnectionimpl.cpp Line: 371
Properties: ConnId-6,6;ThreadID-1145072560
Location:
saw.odbc.connection.open
saw.connectionPool.getConnection
saw.threadPool
saw.threads
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. NQODBC [SQL_STATE: 08004|http://forums.oracle.com/forums/] [nQSError: 10018|http://forums.oracle.com/forums/] Access for the requested connection is refused.
[nQSError: 43001|http://forums.oracle.com/forums/] Authentication failed for in repository Star: invalid user/password. (08004)
Type: Error
Severity: 42
Time: Wed Dec 3 07:13:16 2008
File: project/webconnect/connection.cpp Line: 276
Properties: ThreadID-1145072560
Location:
saw.connectionPool.getConnection
saw.threadPool
saw.threads
Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
Can anyone point me in the right direction here?
Thanks,
GarethThe strange thing is both Gareth and I have configured OBIA/OBIEE on a Linux server and local authentication works fine. Once we enable external EBS authentication, we get the error listed above.
Does anyone who has done the OBIA EBS integration with OBIEE running on Linux have an example of the odbc.ini file. It appears that even though we have reconfigured OracleBIAnalyticsApps.rpd to use OCI everywhere, that there is still some hard coded ODBC references for external authentication.
We are configuring instanceconfig.xml as directed:
Integrating Oracle Business Intelligence Applications with Oracle E-Business Suite
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=552735.1
Configuring InstanceConfig.xml for External Authentication
1. Modify the instanceconfig.xml file for the Oracle BI Presentation Services as shown below:
<?xml version="1.0"?>
<WebConfig>
<ServerInstance>
<CatalogPath>c:\temp\default</CatalogPath>
<DSN>AnalyticsWeb</DSN>
<Auth>
<ExternalLogon enabled="true">
<ParamList>
<Param name="NQ_SESSION.ICX_SESSION_COOKIE"
source="cookie"
nameInSource="EBSAppsDatabaseSID"/>
<Param name="NQ_SESSION.ACF"
source="url"
nameInSource="ACF"/>
</ParamList>
</ExternalLogon>
</Auth>
<!-- Other settings here. -->
</ServerInstance>
</WebConfig>
2. The nameInSource for the cookie should be the same as the Oracle E-Business Suite application database SID name. To verify the name of the cookie, using Firefox, check the name of the cookie created under the us.oracle.com domain (or the domain where your Oracle E-Business Suite Application server is running). Please note that the cookie name is case sensitive. -
BO XI 3.1 : Active Directory Authentication failed to get the Active Directory groups
Dear all
In our environment, there are 2 domain (domain A and B); it works well all the time. Today, all the user belong to domain A are not logi n; for user in domain B, all of them can log in but BO server response is very slowly. and there is error message popup when opening Webi report for domain B user. Below are the error message:
" Active Directory Authentication failed to get the Active Directory groups for the account with ID:XXXX; pls make sure this account is valid and belongs to an accessible domain"
Anyone has encountered similar issue?
BO version: BO XI 3.1 SP5
Authenticate: Windows AD
Thanks and RegardsPlease get in touch with your AD team and verify if there are any changes applied to the domain controller and there are no network issues.
Also since this is a multi domain, make sure you have 2 way transitive forest trust as mentioned in SAP Note : 1323391 and FQDN for Directory servers are maintained in registry as per 1199995
http://service.sap.com/sap/support/notes/1323391
http://service.sap.com/sap/support/notes/1199995
-Ambarish- -
User Authentication Failed error when trying to display a JSP portlet
The steps carried out are as follows :
1. Created a JSP file named "c.jsp" and deployed it under 902_MidTier_Home\j2ee\home\default-web-app\examples\jsp
2. Created a table named USER_TABLE under Scott schema to store the usernames and passwords to validate this JSP application.
3. Registered this JSP as an external application with the following values :
Application Name : RAGHU
Login URL : http://hostname:port/j2ee/examples/jsp/c.jsp
User Name/ID Field Name : username
Password Field Name : password
Type of Authentication Used : POST
3. Clicked on the External Application and entered the username as USER1 and password as USER1 ( These values are available
under USER_TABLE for comparison ). Then it shows the message "Hi User1 .. Welcome message"
4. Now created a directory named JSPSAMPLE under "WEB-INF\Providers" and put the provider.xml file under this.
Created a raghu.properties file and placed it under "WEB-INF\deployment".
5. Now tested the testpage using the URL " http://hostname:port/jpdk/providers/raghu " and it works fine.
6. Registered this as a provider in Portal and added this portlet onto a page. Assigned this page to a newly created user.
It gives the message " Authentication Failed - Update Login Information " which is expected. I click on the link and
it takes me to the external application username password. I enter the credentials but this time it comes back again
to the page with the same message " Authentication Failed - Update Login Information ".
7. Basically the values are not passed to the Username and Password in jsp page which is why the problem occurs.
The JSP Code used is as follows :
<%@ page import="java.sql.*" %>
<HTML>
<HEAD><TITLE>DB Connectivity test</TITLE></HEAD>
<BODY BGCOLOR="#FFFFFF">
<CENTER>
<B>user_table</B>
<BR><BR>
<%
String username = request.getParameter("username");
String password = request.getParameter("password");
Connection conn = null;
try
Class.forName("oracle.jdbc.driver.OracleDriver");
conn = DriverManager.getConnection("jdbc:oracle:thin:@hostname:1521:iasdb","scott","tiger");
Statement stmt = conn.createStatement();
String query = "SELECT * FROM user_table where userid= '"+ username +"' and passwd = '" + password + "' " ;
ResultSet rs = stmt.executeQuery(query);
while(rs.next())
out.println("<TR>");
out.println(" <TD> hi " + rs.getString("userid") + ", welcome</TD>");
out.println("</TR>");
out.println("</TABLE>");
catch(SQLException e)
out.println("SQLException: " + e.getMessage() + "<BR>");
while((e = e.getNextException()) != null)
out.println(e.getMessage() + "<BR>");
out.println("invalid userid,password");
catch(ClassNotFoundException e)
out.println("ClassNotFoundException: " + e.getMessage() + "<BR>");
finally
//Clean up resources, close the connection.
if(conn != null)
try
conn.close();
catch (Exception ignored) {}
%>
</CENTER>
</BODY>
</HTML>
The Provider.xml file used is as follows :
<?xml version="1.0" encoding="UTF-8"?>
<?providerDefinition version="3.1"?>
<provider class="oracle.portal.provider.v2.http.URLProviderDefinition">
<providerInstanceClass>oracle.portal.provider.v2.http.URLProviderInstance</providerInstanceClass>
<session>true</session>
<authentication class="oracle.portal.provider.v2.security.Authentication">
<authType>ExternalApp</authType>
<userFieldName>username</userFieldName>
<userPwdName>password</userPwdName>
<errorPageMessages>Raghu,Please sign in,Sign me up!</errorPageMessages>
</authentication>
<portlet class="oracle.portal.provider.v2.http.URLPortletDefinition">
<id>1</id>
<name>RaghuPortlet</name>
<title>Raghu Mail Portlet</title>
<description>This portlet is to test Integration services using mail.yahoo.com</description>
<timeout>100</timeout>
<timeoutMessage>Raghu timed out</timeoutMessage>
<showEdit>false</showEdit>
<showEditDefault>false</showEditDefault>
<showPreview>false</showPreview>
<showDetails>false</showDetails>
<hasHelp>false</hasHelp>
<hasAbout>false</hasAbout>
<acceptContentType>text/html</acceptContentType>
<registrationPortlet>false</registrationPortlet>
<accessControl>public</accessControl>
<renderer class="oracle.portal.provider.v2.render.RenderManager">
<showPage class="oracle.portal.provider.v2.render.http.URLRenderer">
<pageUrl>http://172.17.24.235:8888/c.jsp</pageUrl>
<contentType>text/html</contentType>
<filter class="oracle.portal.provider.v2.render.HtmlFilter">
<useAuthLinks>true</useAuthLinks>
<headerTrimTag><table width="100%" cellpadding=0 cellspacing=0 border=0><tr><td bgcolor=#9bbad6></headerTrimTag>
<footerTrimTag><table width="100%" cellpadding=2 cellspacing=1><tr><td bgcolor=#9bbad6></footerTrimTag>
<convertTarget>true</convertTarget>
<redirectUrlFieldName>.done</redirectUrlFieldName>
</filter>
</showPage>
</renderer>
<securityManager class="oracle.portal.provider.v2.security.URLSecurityManager">
<authorizType>registered</authorizType>
</securityManager>
</portlet>
</provider>
The Contents of raghu.properties file
serviceClass=oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter
loaderClass=oracle.portal.provider.v2.http.DefaultProviderLoader
showTestPage=true
definition=providers/raghu/provider.xml
autoReload=true
Any inputs regarding why the values are passed properly in case of External Application but not so when registered as
a portlet in Portal.
Regards
Satish GAs I can see from the information posted, you are trying to
use URL-based portlet's SSO feature, though not in a correct
way.
The SSO feature of URL-based portlets relie on the usage
of Cookies as authentication tokens. For example, in the
present context, http://hostname:port/j2ee/examples/jsp/c.jsp
will write a cookie to the client upon successfull authentication.
Subsequent access to the same JSP or some other JSP in the same
workspace should be checking for the existence of this particular
cookie at the client side and if found should not prompt for
user information again.
If you can fine tune your existing applications as per above
conditions, then everything should work fine. Else you might
want to use page parameters to pass user information.
For more information on page parameters, please visit
http://portalstudio.oracle.com/servlet/page?_pageid=350&_dad=ops&_schema=OPSTUDIO&12678_PDKHOME902_39847486.p_subid=249821&12678_PDKHOME902_39847486.p_sub_siteid=73&12678_PDKHOME902_39847486.p_edit=0#NEW1 -
i have a juniper device linux operating system on that we have radius server configured and i am trying to integrate my WLC with that radius
i have added WLC as a host there in radius
on wlc i have configured authentication like radius ip shared secret key and done
its working i can ping radius server
also in wlc i configured on Wlan aaa allow override check box and also hited the WPA2 802.1x layer2 security and radius server option brought on top.
i also configured my windows wireless adaptor as PEAP MSCHAP v2
i am trying to connect this ssid and its asking for my AD accounts but when i enter that its not authenticating users and giving this logs.
(WiSM-slot24-1) >debug aaa events enable
(WiSM-slot24-1) >
(WiSM-slot24-1) >
(WiSM-slot24-1) >*apfMsConnTask_0: Dec 31 15:12:03.043: 00:13:e8:3e:26:bf Processing RSN IE type 48, length 22 for mobile 00:13:e8:3e:26:bf
*apfMsConnTask_0: Dec 31 15:12:03.043: 00:13:e8:3e:26:bf Received RSN IE with 0 PMKIDs from mobile 00:13:e8:3e:26:bf
*apfMsConnTask_0: Dec 31 15:12:03.043: 00:13:e8:3e:26:bf apfMsAssoStateInc
*dot1xMsgTask: Dec 31 15:12:03.044: 00:13:e8:3e:26:bf Station 00:13:e8:3e:26:bf setting dot1x reauth timeout = 1800
*dot1xMsgTask: Dec 31 15:12:03.044: 00:13:e8:3e:26:bf Sending EAP-Request/Identity to mobile 00:13:e8:3e:26:bf (EAP Id 1)
*Dot1x_NW_MsgTask_0: Dec 31 15:12:03.097: 00:13:e8:3e:26:bf Received EAPOL START from mobile 00:13:e8:3e:26:bf
*Dot1x_NW_MsgTask_0: Dec 31 15:12:03.097: 00:13:e8:3e:26:bf Sending EAP-Request/Identity to mobile 00:13:e8:3e:26:bf (EAP Id 2)
*Dot1x_NW_MsgTask_0: Dec 31 15:12:12.596: 00:13:e8:3e:26:bf Received EAPOL EAPPKT from mobile 00:13:e8:3e:26:bf
*Dot1x_NW_MsgTask_0: Dec 31 15:12:12.596: 00:13:e8:3e:26:bf Received Identity Response (count=2) from mobile 00:13:e8:3e:26:bf
*Dot1x_NW_MsgTask_0: Dec 31 15:12:12.596: 00:13:e8:3e:26:bf Audit Session ID added to the mscb: 0a8740e10000002e4efefc1c
*Dot1x_NW_MsgTask_0: Dec 31 15:12:12.596: Creating audit session ID (dot1x_aaa_eapresp_supp) and Radius Request
*aaaQueueReader: Dec 31 15:12:12.597: apfVapRadiusInfoGet: WLAN(1) dynamic int attributes srcAddr:0x0, gw:0x0, mask:0x0, vlan:0, dpPort:0, srcPort:0
*aaaQueueReader: Dec 31 15:12:12.597: 00:13:e8:3e:26:bf Successful transmission of Authentication Packet (id 202) to 10.34.11.2:1812, proxy state 00:13:e8:3e:26:bf-00:00
*radiusTransportThread: Dec 31 15:12:12.598: ****Enter processIncomingMessages: response code=11
*radiusTransportThread: Dec 31 15:12:12.598: ****Enter processRadiusResponse: response code=11
*radiusTransportThread: Dec 31 15:12:12.598: 00:13:e8:3e:26:bf Access-Challenge received from RADIUS server 10.34.11.2 for mobile 00:13:e8:3e:26:bf receiveId = 3
*Dot1x_NW_MsgTask_0: Dec 31 15:12:12.598: 00:13:e8:3e:26:bf Processing Access-Challenge for mobile 00:13:e8:3e:26:bf
*Dot1x_NW_MsgTask_0: Dec 31 15:12:12.598: 00:13:e8:3e:26:bf Sending EAP Request from AAA to mobile 00:13:e8:3e:26:bf (EAP Id 3)
*Dot1x_NW_MsgTask_0: Dec 31 15:12:12.600: 00:13:e8:3e:26:bf Received EAPOL EAPPKT from mobile 00:13:e8:3e:26:bf
*Dot1x_NW_MsgTask_0: Dec 31 15:12:12.600: 00:13:e8:3e:26:bf Received EAP Response from mobile 00:13:e8:3e:26:bf (EAP Id 3, EAP Type 3)
*aaaQueueReader: Dec 31 15:12:12.600: apfVapRadiusInfoGet: WLAN(1) dynamic int attributes srcAddr:0x0, gw:0x0, mask:0x0, vlan:0, dpPort:0, srcPort:0
*aaaQueueReader: Dec 31 15:12:12.600: 00:13:e8:3e:26:bf Successful transmission of Authentication Packet (id 203) to 10.34.11.2:1812, proxy state 00:13:e8:3e:26:bf-00:00
*radiusTransportThread: Dec 31 15:12:12.601: ****Enter processIncomingMessages: response code=3
*radiusTransportThread: Dec 31 15:12:12.601: ****Enter processRadiusResponse: response code=3
*radiusTransportThread: Dec 31 15:12:12.601: 00:13:e8:3e:26:bf Access-Reject received from RADIUS server 10.34.11.2 for mobile 00:13:e8:3e:26:bf receiveId = 3
*radiusTransportThread: Dec 31 15:12:12.601: 00:13:e8:3e:26:bf [Error] Client requested no retries for mobile 00:13:E8:3E:26:BF
*radiusTransportThread: Dec 31 15:12:12.601: 00:13:e8:3e:26:bf Returning AAA Error 'Authentication Failed' (-4) for mobile 00:13:e8:3e:26:bf
*Dot1x_NW_MsgTask_0: Dec 31 15:12:12.601: 00:13:e8:3e:26:bf Processing Access-Reject for mobile 00:13:e8:3e:26:bf
*Dot1x_NW_MsgTask_0: Dec 31 15:12:12.602: 00:13:e8:3e:26:bf Removing PMK cache due to EAP-Failure for mobile 00:13:e8:3e:26:bf (EAP Id 3)
*Dot1x_NW_MsgTask_0: Dec 31 15:12:12.602: 00:13:e8:3e:26:bf Sending EAP-Failure to mobile 00:13:e8:3e:26:bf (EAP Id 3)
*Dot1x_NW_MsgTask_0: Dec 31 15:12:12.602: 00:13:e8:3e:26:bf Setting quiet timer for 5 seconds for mobile 00:13:e8:3e:26:bf
*apfMsConnTask_0: Dec 31 15:12:15.319: 00:13:e8:3e:26:bf Processing RSN IE type 48, length 22 for mobile 00:13:e8:3e:26:bf
*apfMsConnTask_0: Dec 31 15:12:15.319: 00:13:e8:3e:26:bf Received RSN IE with 0 PMKIDs from mobile 00:13:e8:3e:26:bf
*dot1xMsgTask: Dec 31 15:12:15.320: 00:13:e8:3e:26:bf Sending EAP-Request/Identity to mobile 00:13:e8:3e:26:bf (EAP Id 1)
*Dot1x_NW_MsgTask_0: Dec 31 15:12:15.389: 00:13:e8:3e:26:bf Received EAPOL START from mobile 00:13:e8:3e:26:bf
*Dot1x_NW_MsgTask_0: Dec 31 15:12:15.389: 00:13:e8:3e:26:bf Sending EAP-Request/Identity to mobile 00:13:e8:3e:26:bf (EAP Id 2)
any idea to solve this problem?
or any one knows that how to configur a radius server on juniper linux operating system?
many thanks in advanceYou should post on the Juniper forums regarding your policy configuration. You should stick with using a radius than just doing ldap through the wlc. Here is a link for webauth using ldap, but should get you close. Again... you should look at getting your juniper radius configuration fixed first.
http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080a03e09.shtml -
Does anyone know how to reset your security questions?? I loaded an itunes gift card on new ipod but when trying to make a purchase, itunes is asking us the incorrect security questions?! (for 1st time purchase) I know the questions are not what I chose because I wrote the questions & answers down when setting up the ipod. Any ideas??!!!
Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
1. Go to: Apple Express Lane;
2. Under Product Categories choose iTunes;
3. Then choose iTunes Store;
4. Then choose Account Management;
5. Now choose iTunes Store Security and answer the bullet questions, then click
Continue;
6. Sign in with your Apple ID and press Continue;
7. Under Contact Options fill out the information and advise iTunes that you would
like your security/challenge questions reset;
8. Click Send/Continue.
You should get a response within 24 hours by email.
In the event you are unsuccessful then contact AppleCare - Contacting Apple for support and service.
Another user had success doing the following:
I got some help from an apple assistant on the phone. It is kind of round about way to get in.
Here is what he said to do and it is working for me...
a. on the device that is asking you for the security questions go to "settings", > "store" >
tap the Apple ID and choose view"Apple ID" and sign in.
b. Tap on payment information and add a credit/debit card of your preference then select
"done", in the upper right corner
c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
should be asked to verify your security code for the credit /debit card and NOT the
security questions.
d. At this time you can remove the card by going back in to edit the payment info and
selecting "none" as the card type then saving the changes by selecting "done". You
should now be able to use your iTunes store credit without answering the security
questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends! -
MIC not verified # authentication-failed
Hi,
We are getting this error while trying to send messages from XI through AS2:
MIC not verified # authentication-failed
Can anybody please let us know the reason for this error.
Thanks in advance.
Best Regards,
ShwetaHi Shabarish & Prateek,
Thanks a lot for the information.
I've also checked this information in Seeburger document and I agree this can be an issue with the Certificate.
But these scenarios were working fine for a long time,the Certificates are valid till 2016.
And the most important thing is,we get this error in 1 message out of 100-200,other messages are sent successfully.
So,if this is an issue with certificate,how is it possible that it affects only 1-2 messages not all.
I had never seen this error before and suddenly we have started getting such errors for a number of scenarios for last 15 days.
I believe ,there can be a problem with Certificate for 1 customer but if it is more than one ,it is hard to believe that all of them have problems with Certificates and at the same time.
I tried to search for notes related to this problem.
Is it something related to MIME content,as mentioned in note 1287778?
Kindly let me know.
Thanks.
Regards,
Shweta
Maybe you are looking for
-
When I open Facebook the print is very large and the page does not fit the screen so need to keep moving back and forth across to be able to read it. It was not like this before. Please can you find a solution for me Thank you
-
Disk Utility....problems copying DVDs
First off, the DVD's I will refer to are ones I made myself, on this same machine. I'm not duplicating commercial stuff. A while back I successfully used the Disk Utility to make a disc image of an old DVD and make a copy of it. Now, however, I can't
-
Itunes 11.1 won't install on my Mac
Hi, I updated to IOS7 today and iTunes tells me I need to update to iTunes 11.1. When I open iTunes it tells me a new version (11.1) is available. However, when I choose to update iTunes, the program tells me it is up to date. I checked the version u
-
Drag and drop Images into Multiple Targets
Hello, I want to alter the NI example "Drag and Drop - Multiple Data Types to Start Drag" to use multiple image Targets. The current VI only allows for dropping image into a single Target. I want to duplicate the target window a few times, in order
-
Hi PS Gurus what is accrual and differal cost? thanks in advance...