1st time installation question?

I am installing Logic 9 Studio, and since I have FCP 3 Studio I didn't install compressor or STP2. I notices that some loops were unchecked. I check as many as I could. Were these the GB and STP loops that already existed? Also the install doesn't need Audio Content Discs 2 and 3. Am I missing out on any audio content that should be installed?
Cheers.

The audio content disks are the Soundtrack Pro audio content. If you've already installed these with FCP, then there is no need or point installing them again.

Similar Messages

1st time installation for newbies

I'm a newbie and am finding it difficult to determine the steps I need to follow to begin learning Oracle. With so many products there's nothing online to suggest or recommend where to start. Consequently, I've just spent over 3+ hours downloading the 9i Personal Edition. After doing so, the zip file didn't install anything but a few folders. Upon further searching, the folders were empty of files, which is hard to believe given the size of the download. Going back to the source of where I selected to download, there were no tips or guidelines noted at to how to install the 9i Personal Edition. I then looked through the FAQ's, with no success. I can't believe I'm the first to encounter this problem. In addition, I'm running Windows ME, which is NOT one of the choices given, so I've selected Win 98, ASSUMING it might be the correct choice. It would see that someone managing this website needs to provide a sequence of steps to follow in getting up to speed as well as bring more clarity to the installation process. I'd appreciate someones feedback on this.

I am not sure if this is the right forum, butr since the query was posted here, I will add my question:
I downloaded the 3 zipped files for Oracle 91 for Personal Edition on a XP platform, and unizipped them.
Then I went to Programs / Oracle / Setup.exe
I installed the default options.
I tried to go to SQL but I don{t know what hos name I should use.
Is there any PDF file with instructions on how to star using SQL in my new installation, and in general how to start studying using my own machine (XP)?
I have printed some material from the site (SQL).
Thanks.

First time installation question...

when doing the installation of FC Studio can i choose to install the media type files (soundtrack pro content, livetype media, motion content) on a secondary internal HD?
i use a 74gb Raptor as my boot drive and really don't want to install 30gb on it for FC Studio. i will if i have to but.....

i guess i jumped the gun, all i had to read was the bottom of the "before you install" txt file....
i can install the media on a seperate drive

TS3297 Does anyone know how to reset your security questions?? I loaded an itunes gift card on new ipod but when trying to make a purchase, itunes is asking us the incorrect security questions?!(for 1st time purchase)

Does anyone know how to reset your security questions?? I loaded an itunes gift card on new ipod but when trying to make a purchase, itunes is asking us the incorrect security questions?! (for 1st time purchase) I know the questions are not what I chose because I wrote the questions & answers down when setting up the ipod. Any ideas??!!!

Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
1. Go to: Apple Express Lane;
2. Under Product Categories choose iTunes;
3. Then choose iTunes Store;
4. Then choose Account Management;
5. Now choose iTunes Store Security and answer the bullet questions, then click
      Continue;
6. Sign in with your Apple ID and press Continue;
7. Under Contact Options fill out the information and advise iTunes that you would
      like your security/challenge questions reset;
8. Click Send/Continue.
You should get a response within 24 hours by email.
In the event you are unsuccessful then contact AppleCare - Contacting Apple for support and service.
Another user had success doing the following:
I got some help from an apple assistant on the phone. It is kind of round about way to get in.
Here is what he said to do and it is working for me...
a. on the device that is asking you for the security questions go to "settings", > "store" >
      tap the Apple ID and choose view"Apple ID" and sign in.
b. Tap on payment information and add a credit/debit card of your preference then select
      "done", in the upper right corner
c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
      Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
      should be asked to verify your security code for the credit /debit card and NOT the
      security questions.
d. At this time you can remove the card by going back in to edit the payment info and
      selecting "none" as the card type then saving the changes by selecting "done". You
      should now be able to use your iTunes store credit without answering the security
      questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends!

HT201304 I forgot my answer to my security question and I am required to enter it because it will be my 1st time to purchase on my new ipad.. Is there some way to retrieve it?

I forgot my answer to my security question and I am required to enter it because it will be my 1st time to purchase on my new ipad.. Is there some way to retrieve it?

From http://support.apple.com/kb/HT5665 :
If you have three security questions and a rescue email address, sign in to My Apple ID and select the “Password and Security” tab to send an email to your rescue email address to reset your security questions and answers.
If you have one security question and you know your Apple ID password, sign in to My Apple ID and select the “Password and Security” tab to reset your security question.
If you have one security question, but don't remember your Apple ID password, contact Apple Support for assistance. Learn more about creating a temporary support PIN to help Apple confirm your identity when you contact Apple Support.
If you can’t reset them via the above instructions (you won't be able to add a rescue email address until you can answer your questions) then you will need to contact Support in the country where you and your iTunes account are to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

How to sync iPad with apps for 1st time to iTunes?

Hi -
Can't find the answer to this question directly, hence posting it here.
My nephew's iPad has many apps , and photos, and he has never synced it to iTunes. He want's me to help him. I'm reasonably familiar with both iPad and iTunes.
However - I'm worried that when he connects to iTunes for the 1st time he will have the iPad wiped clean by the empty iTunes session.
I have searched high and low but can't find a reassuring set of steps to follow.
Hence I would be very grateful to anyone who can point to complete, thorough online instructions, or offer them yourself, on what _precisely_ I must do to get his iPad synced to a new iTunes session for the very first time, without loosing the iPad content.
We need to upgrade the OS badly (its the OS released from the shop purchase).
thanks, for what is probably a question asked with a thoursand variations.
Kind regards,
Kevin Nolan,
Dublin, Ireland.
PS: Apple - if you readt this - iTunes and syncing is a very tricky to handle, with potential dire consequences if you do it wrong even once. At a minimum, please offer greater felxibility and more detailed tutorials across various troubleshooting scenarios such as mine

Thank you both for your time and responses
roaminggnome - my nephew was 10 when he got it and his family are not particularly computer savy. It didn't occur to them that syncing was such a priority. Thanks for the pointer to Apple feedback - I'll post my suggestion to them (I'm sure they've received it many times before!)
Demo - that other thread looks absolutley excellent and your detailed instructions there look spot on - thank you.
Thanks to you both again - genuinely appreciated.
Cheers,
Kevin.

I have an IPOD touch 4th generation. When I try to go and buy apps from Itunes and App store it askes for ssecurity codes because it is the 1st time using it. can not remember. How do I reset it or find them?

I have an IPOD touch 4th generation. When I try to buy apps from apps store and Itunes it says this is the 1st time doing it so wants me to answer security questions. Granddaughter put 2 in the ipod but can't remember them. how do i either change them so I know what they are or just take them out again?

Strange; yesterday there was a link via which you could get a reset email sent, but today that link is missing. So if you've forgotten your answers, there is no way around the problem without involving Apple. Go here:
http://www.apple.com/emea/support/itunes/contact.html
to report the issue to the iTunes Store.
Regards.

1st time Authentication fails

Hi,
I am using 5508 controller and having 2 SSID configured
Data - for data users Authentication is [WPA2][Auth(802.1X)] hitting data VLAN
Voice - for Android and other voice users authentication as [WPA2][Auth(802.1X + CCKM)] hitting Vocie VLAN
now my question is when ever I try to connect from my laptop to Data - 1st time itself I get the IP and join to network, but where as when I try to connect to Voie SSID from phone or from laptop, authentication prompts for 2times and after entering the username and pwd 2 times it gets connects.
can anyone tell me why its asking 2 times for authentication.

Please check on ACS what is the reason given for the first authentication failure.

Deploying iTunes and plugging an iPhone for the 1st time

Hello everybody,
I'm going tu upgrade iTunes to 9.2.1 on a feew weeks for the entire park.
I enabled the parental control to doesn not allow the acces to the Apple store.
I put the ipsw file on a network share.
So when iTunes will be deployed I will send a mail with the procedure, how to upgrate the iOS.
Here is the problem :
There are a lot of people who haven't synced their iPhone with iTunes.
So when they will plug for the first time their iPhone to the computer, iTunes will ask to register. So they will have to click on "Ask later". After that, an erreor occurs "problem to acces to iTunes Store" : that's noral because there is no access to the iTUnes store.
When we click on OK, at this time, finaly, we are on the main screen, and start the upgrate.
So there is the question :
Is there a way to skip all the introduce screen when an iPhone is plugged for the 1st time to a computer, and have the main screen directly?
Thank you very much.
Florian

NO

DSEE 6.3 installation questions/problems

1) The DSEE 6.3 installation guide explains that to install DSEE 6.3, one has to install DSEE 6.2, then upgrade the shared components and then install the DSEE 6.3 patch. It looks crazy not to be able to install 6.3 from scratch.
And I don't understand why there's a 6.3 full native installation available for download, as well as a patch install ?
2)
Anyway, I tried to install DSEE 6.3 from scratch with the native packages full distribution on RHAS 4U6, and
get an error: the installation was successful even if the sun-ldap-console-gui rpm failed to install, accordign to the installation logs.
I have had to manually edit the /etc/opt/webconsole/console/config.properties and correctly set the java_home & java_help variables, then remove the package and install it again . (these variables were set to unexisting directories)
Known bug ?
3)
When the /tmp filesystem is mounted with the -noexec flag (it's not my choice but my customer's one), the DSEE 6.3 installer script fails as it tries to execute some scripts from /tmp. RFE ?
4)
The 1st time I ran the installer, I only installed the directory packages. Then, I ran the installer again to install DPS. The installation was successful, without any error but I noticed it replaced my /etc/opt/webconsole/console/config.properties file with the default one, which caused problems later.
For example, it prevented the Web Console from starting.
Known bug too ?

I use the native package installer java_es-5u1-identsuite-ga-linux-x86.zip. (I only use the zip install for the dsrk for example).
Important... Install all directory items whether you need them or not.
Set up dscc.
dsccsetup initialize
/opt/sun/dscc6/bin/dsccsetup initialize
Start consoles, login and make sure its working.
/opt/sun/ds6/bin/dsadm start /var/opt/sun/dscc6/dcc/ads
/usr/sbin/smcwebserver start
/opt/sun/cacao/bin/cacaoadm start
At this point I create a ds instance with unprivileged user, but I dont think its a necessary step for upgrade patch.
/opt/sun/ds6/bin/dsadm create -u carson -g carson -p 1389 -P 1636 /opt/ds
Stop all servers. Stop all consoles. Apply patch 125309-07 by running the install.
You can check version on the instance.
cd /opt/sun/ds6/lib
./ns-slapd -V -D /opt/ds

I noticed that any other code in my while loop only gets called at the 1st time through the loop and when a event is executed.

HI there!
I have a while loop, in which i am reading from/writing to a compact rio. Furthermore, i added a event structure, its the 1st time i'm using it so i'm a bit lost at times.
I have the event structure set up for all my button i want to trigger an event. However, i have some other code which i would also like to be executed, evebn though no event has been executed.
I noticed that the other stuff in the loop only gets executed the 1st time through the loop and when an event is triggered.
My question therefore is, how do i get the other stuff to execute as well?
Please advise.
Thanks.
Regards,

Put the other code in the timeout event case. Wire some positive value to the timeout hourglass input. That code will execute everytime a timeout occurs. For instance, if you wire 100 into the timeout, the code in that case will execute every 100 mSec.
- tbob
Inventor of the WORM Global

Help - 1st time downloading apps

Hi, I am trying to download a free app for the very 1st time. When I tap install, I was prompt to sign and then eventually to supply by CC details. Is this a normal procedure, even with free apps?

You can also create an iTunes account without a cc... http://support.apple.com/kb/ht2534

For the 1st time I am trying to send an iPhoto by email but get an error message "combinations of username and password not recognised" I use the same details to log on to my Sky Mail (yahoo mail ) account . Any ideas?

For the 1st time I am trying to send an iphoto by e-mail but get the error message " combination of username and password not recognised by the server" I use Sky Mail ( yahoo mail) and input the same username and password that I access Sky Mail - have retried many times. Predictably the Sky help desk have no idea. Can anyone help please?

I regret that you're having trouble setting up your email, corbad! You're on the right track with your incoming email address. You might also try incoming.verizon.net or incoming.yahoo.verizon.net as possible alternatives, and 995 as the port number. Please let me know how that goes!
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

I have an Apple ID and trying to sign in for the 1st time on iTunes. When I do, I get the message: "This Apple ID has not been used with the iTunes Store. Please review your account information." When I do, I get stuck in the same loop and can't sign in!

I have an Apple ID and trying to sign in for the 1st time on iTunes. When I do, I get the message: "This Apple ID has not been used with the iTunes Store. Please review your account information." When I do, it brings me to the same AppleID login window, and I get stuck in the same loop. I never get to the following screen to enter my account info. What's going on?? This is MADDENING!

If you want to use it, click Review and check your account information. Or you could contact the store support staff if you are concerned at http://www.apple.com/emea/support/itunes/contact.html for further help.

I got the new iPhone5 back in Dec, I hooked it up to my computer for the 1st time this wk. It deleted all new data added since Dec (notes,contacts,texts,pics, info in apps) and reverted back to all my old data. How can I retrieve all the lost data??

I got the new iPhone5 back in Dec, I hooked it up to my computer for the 1st time this wk. It deleted all new data added since Dec (notes,contacts,texts,pics, info added to apps) and reverted back to all my old data (literally uploaded all of my old texts and 1400 old pics and deleted anything new). How can I retrieve all the lost data?? Please help!!

SkyDaughter29 wrote:
My current situation: I have soooo many texts on my iphone and I haven't deleted many because I need the information contained in them for future reference and for legal purposes. I would really like to find a means and way to save them other than on the phone itself. I've done searches for various apps yet I'm not finding what I think I would need. It appears Apple does not sync the texts between the iphone and my MacBook Pro.
Try the computer apps PhoneView (Mac) or TouchCopy (Mac & PC):
http://www.ecamm.com/mac/phoneview/
http://www.wideanglesoftware.com/touchcopy/index.php
Best of luck.

1st time installation question?

Similar Messages

Maybe you are looking for