1TB HD's in my G5 dual 2.0 (not intel)

I have an older G5 dual 2.0. I was wondering if it would recognize a 1 TB drive (I cannot find the specs that came with the machine, but I thought 500GB was the biggest you could go.)
If yes, what drives do you all recommend?

Google - they have never lived up to hype, their published vs actual specs for seeks and I/O.
Their firmware has been shoddy ever since they acquired Maxtor (which was doing well finally).
Yes, they have 5 yrs warranty, so does WD with their enterprise line. And I never expect to be using a drive 5 yrs later except maybe as 3rd tier backup.
Seagate supports smaller shops and resellers better so you find them being carried by places like MacGurus. Check drive upgrade DB, reviews, Barefeats, Tom's. And Newegg. Oh, and Seagate forum has been a hornet's nest about their 1.5TB drive problem. They do seem to work okay on PCI controller better than native SATA ports.
OWC always checks - and will update - firmware before shipping, to insure it works with Macs. I'd use MacSales instead.
And remember, the G5 came out when SATA was in its infancy or didn't hardly exist - and came as a shocking suprise to many in summer '03, "SATA" was really just your old ATA/PATA with a bridge, not native, and when they did move to being "native" is when all the trouble with compatability came up and some drives worked, some didn't, features varied wildly.
The problem with a firmware issue, and every vendor has them to some extent, is Seagate no longer makes their firmware available to customers. The problem with Seagate the iMac G5 caused 90 second hangs. Now we have something almost similar to that again.

Similar Messages

  • How do I move an entire app to a dual monitor? Not just a window?

    How do I move an entire app to a dual monitor? Not just a window? I can drag single windows, but if I move a window to the second monitor and hit a button, like 'New', that opens a new window, then it opens the window in the first monitor. I want it to open in the second monitor instead.

    Right. Mail remembers as well. I have the menubar set on my larger display, and the main Mail window on the MBP display. When I create a new message, it displays the composition window on whichever display I used the last time for composition. So after the first time I moved the composition window to the larger display, it always opens on that display. I can't remember if it remembers that behavior after taking the MBP on the road, where I use only its display, and then reconnect the second display back at home.
    Mark

  • Lumia 630 dual sim headphones not working

    After denim update on lumia 630 dual sim headphones not working properly in india

    Hi, kingpawan. Is the issue the same when you're using another compatible headset? Are you experiencing this when you're watching a video? Did you happen to check if the phone's system settings are all updated? To do this, go to Settings > swipe to applications > store > check for updates. We'd love to hear your response. BTW, welcome to our community!

  • Dual Band or not?

    How do I know which model numbers are dual band and which are not when buying a used Airport Extreme? I am looking at one identified as APPLE MB053LL/A and the seller says it is dual band but I am getting conflicting reports. Thanks,
    Rich

    Welcome, Rich.
    Easy to see how things can be confusing here.
    The MB053LL/A is dual band, but not a "simultaneous" dual band model. It can create a wireless network either at 2.4 GHz or 5 GHz, but not both at the same time.
    The newer models are "simultaneous" dual band versions, which means that they can create both 2.4 GHz and 5 GHz networks simultaneously. In addition, these models include a "Guest" network feature, which is also a "dual band" network if enabled.
    For more info, check this link
    Message was edited by: Bob Timmons

  • Why is an Active Dual sim iPhone not possible?

    Why is an Active Dual sim iPhone not possible?

    This is a user to user forum, we are all users here, just like you, Apple does not follow these discussions. If you want to tell Apple about your wishes, please use this link:
    Apple - iPhone - Feedback
    If you want to use the iPhone with more than one SIM, you'll have to buy an unlocked device or get your existing device unlocked by your carrier:
    iPhone: About unlocking

  • Dual Ethernet will not connect if set to share Single IP address

    The subject says it all. My trusty old Dual Ethernet will not connect if set to share Single IP address.
    I cannot get anything but a self assigned IP address with it set to share a single IP address.
    Before about Tuesday of last week I had connected to it a Mac mini, iMac, Dell Desktop, Dell Laptop, and PS3 all working fine. I think Comcast or Apple updated their system or Airport software and now the old dual Ethernet will not share a single IP address.

    So far as I know, there has been no recent change in Apple's software affecting the Snow (a/k/a Dual Ethernet) base station. About 2-1/2 weeks ago, Apple distributed an update to AirPort software for Intel Macs running Tiger, but it would not have affected the base station.
    Your topic implies that when the Snow is not set to share a single IP address (i.e., presumably, when "Distribute IP addresses" is unchecked in the Network pane of AirPort Admin Utility for Graphite and Snow), one of the computers is connecting to the Internet through the base station. I also imagine that the self assigned IP address you mention is the IP address of that computer, rather than of the base station, and that that computer obtains an IP address from Comcast when the Snow is not distributing IP addresses.
    Assuming that that computer is connecting wirelessly, then whatever settings that computer is using for TCP/IP and PPPoE in the AirPort part of System Preferences, while the computer connects to the Internet, should be the ones used for the base station, in the Internet pane of AirPort Admin Utility for Graphite and Snow. (Most likely, it is simply "Using DHCP.") The IP address obtained from Comcast should be received by the base station, when it is set to distribute IP addresses in the Network pane, and the IP address should show up in the Internet pane. (When the Snow is distributing IP addresses, it has two IP addresses itself, a WAN IP address obtained from Comcast and a LAN IP address, 10.0.1.1, visible only to devices in your network.)
    Even when the settings are correct, the Snow might not be able to obtain an IP address if your cable modem remembers the computer, which had been receiving the IP address previously. You'll probably need to shut down the computers and unplug power to the base station and cable modem. After waiting 5 minutes, restore power to the modem, then after another 5 minutes, restore power to the base station, then after another 5 minutes, start up a computer.

  • Ti4800SE (8X) dual VGA or not?

    I've purchased a ti4800SE 8X, to run with my P4 (4X) motherboard.
    On the ti's box it says DUAL-VGA, but try what I like, I cannot get the seperate display working under Windows 2000.
    It's OK when the machine is booting (showing BIOS info & Win2K loading screen), but when the non-standard VGA drivers kick in, display switches to on card only (the one attached to the DVI port).
    Is the card actually capable of proper dual-video (ie not just cloning)?
    Any help appreciated.
    thanks
    Pauwl

    pauwll,
    As long as you hook up the Monitors correctly and you use nView to extend your destop etc. You are all set.
    Dual Monitors works with both the MSI and the nVidia Drivers.
    Take Care,
    Richard
    P.S. I use the nVidia DetonatorFX Drivers from the nVidia Website.

  • Z97 Gaming 5, Dual Channel RAM not working?

    Here are my specs for the moment , Windows 7, Intel Core i7 4770k, 8,00GB Single-Channel DDR3 @ 666MHz (9-9-9-24), Nvidia GeForce GTX 780 (EVGA)
    As the title says dual RAM is not working, when I put all 4 RAM sticks in their slots or even just two in dual channel mode my monitor will not respond and the screen is just black, can't even go to BIOs.
    The BIOs settings are at 1333 MHz and 1.5 v, I've tried raising the volt and lowering it, anyone have any ideas?
    I've tried the 1-3 and 2-4 slots with two 4gb sticks and it does not work, but the 1-2 and 2-4 works fine, have also tried all the individual sticks so none of them are faulty.
    RAM: Corsair XMS3 DDR3 1333MHz 16GB KIT CL9 4x4

    Quote
    I've tried the 1-3 and 2-4 slots with two 4gb sticks and it does not work, but the 1-2 and 2-4 works fine, have also tried all the individual sticks so none of them are faulty.
    Please clarify. You mean a single stick works in 2 or 4 but not 2 and 4 together? So that means DIMM slot #3 is the only one that doesn't work at all? My suspicion is a grounding or short under the mainboard by an errant standoff, or the DIMM slot has some debris in it, or the slot is just plain faulty. Other possible is a pin problem in the CPU socket.

  • New MacBook (Aluminum), new Time Capsule (Dual-Band), backups not working

    My Mom got a new (refurbished) 13.3" MacBook (Aluminum) and new (not refurbished) Time Capsule 500 GB (Dual-Band.) The Time Capsule is working great for wireless internet and we can copy files to and from it, but Time Machine backups are not working. I enabled Time Machine, selected her TC, and then when it tries to backup it sits at the preparing stage for a little while and then gives a very unhelpful "the backup failed" message. Unfortunately I don't have the exact error message, but it never gets out of the preparing phase. It doesn't stay in preparing forever, it only stays there for a minute or so before it gives up and reports the backup failed message and stops. It's unclear to me, searching these forums, if this problem is the same as others are reporting.
    I've tried turning off Time Machine and back on, removing and reselecting the Time Capsule, etc. Nothing makes a difference. There are no backup files on the TC - it's brand new.
    This happened out of the box, but I also tried installing the latest Time Capsule firmware. It didn't help.

    Apple needs to create a configuration tool that configures all the Apple devices one owns by creating a network diagram using drag and drop symbols...
    Sounds like a cool suggestion. If you want Apple to hear it, go to www.apple.com/feedback/timecapsule.html

  • Clean Install G4 Dual 1 GHz-Not enough Disk Space Error? -SLOW USB copies

    HELP puhleeeeze!
    This seems to be an issue on various sites with no one being able to figure out what is the cause and a solution. One person stated his problem went away with a fullwipe and clean-reinstall of everything. But this is what I did already. 
    What is the reason for the "Not Enough Disk Space" error message when both my hard drives have gigs of space available. If I had hair I'd be pulling it out by now!   When trying to copy a file to my 2 internal hard drives that have a lot of space available, but only by the USB port?!!
    I have a Power Mac G4 Mirrored Door (MDD) Dual 1 GHz with a clean install of 10.5.8 from the Original Mac OS X Leopard DVD. Both internal hard drives are 60GB and 100GB. The hard drives were wiped clean with Disc Utilities and reformatted to Mac OS Extended (Journaled). The Power Mac only has the OS and a few music apps installed. Easily over 30 GB of space left on the the main G4 interal hard drive and about 75 GB on the other internal hard drive.
    The error seems to only happen when I connect a USB flash drive to the USB port. I tried to copy a 50MB update to the desktop-"Not Enough Disk Space" error message happened.
    I know that the G4 MDD Power Macs only have USB 1.0. Is this a USB 2.0 issue? Another issue is that it has very slow USB speed (dramtically slower than normal USB 1.0 copying of files. And this is only when it is successful. Is it a USB format issue? I know I couldn't get an external USB 2.0 drive to mount on the Power Mac at all. Disc Utilities could see it but it still would not mount. I have a friend who has an older G4 single processor Mac that doesn't experience these issues with its USB 1.0 ports.
    Now here's the kicker:
    If I put in a CD disc in the DVD/RW drive, it copies with no problems to either hard drive. If I connect to the Power Mac  via the ethernet network, files can copy with no problems. But any USB connection -  I get a the "Not Enough Disk Space" error message. I know this is an old mac... but it's never been problematic until this latest wipe and update to Leopard 10.5.8.
    Is there a solution to this? Any and all help, feedback, comments, thoughts are greatly appreciated in advance!!!

    Hello everyone,
    Ok, I did the ultimate task. I erased the hard drives, AGAIN. Just to start fresh from scratch. Hard drives were erased. Did a new install of Mac OS 10.5. And all was well. I could copy with no problems. I gave the computer to my friend and all was good for a couple of days and then the issue came back again. He couldn't copy anything to his internal hard drives and we received the "Not enough disk space" error message! I was baffled. A complete hard drive erase 2 times, 2 fresh Mac OS 10.5 installs and it works for a few days and then coping to HD we got the same **** problem again! THEN - I remembered that the PRAM battery was dead on this G4 Mirrored-Door Dual 1GHz PowerMac. I had recommended that he get a new battery, because this computer would always have the incorrect date and time after every restart. So with recalling this, I had him reset the PRAM by holding down the CMD+OPT+P+R keys after a restart (start-up Chime). I had him hold the keys for at least 3 start-up-chimes. Soon as the G4 Power Mac started up everything was fine again. He was able to copy files to his hard drives again with the "Not enough disk space" error message.
    So everyone! Try zapping your PRAM (resetting the PRAM) and see if this solves your problem. I told my friend to get a new PRAM battery to replace the old one that is completely dead. I have not heard back from him.  I will ask him again if the problem has come back.
    If that fails: My only other solution would be to consider that it is possible that Mac OS 10.5 has a conflict or issue with the G4 Processors and maybe it is safer to install Mac OS 10.3 or 10.4. Because this problem only has occured after installing Mac OS 10.5, the highest version of the Mac OS the Dual 1GHz Mirrored-Door G4 can be installed.
    Cheers,
    B

  • 1GHZ dual G4 will not boot - nada

    I have a 1 GHZ dual G4 with absolutely nothing other than the original OS 10.2.1 on the HD & no extra RAM installed and it will not start, not even from;
    Original OS 10.2.1 install disk
    Apple OS 9.1 install/ restore disk
    Apple Hardware Test disk (v 1.2.6)
    Single user or Safe mode
    Disk Warrior CD (v 3.0.3)
    New OS 10.5.1 install disk....
    I usually get to the startup screen before either a kernel panic or freeze brings everything to a sudden halt - I've tried every key-combination I have read about but to no avail - any ideas before I reach for the sledge-hammer?

    Hi! First make sure the battery is putting out about 3.6 volts because a weak or dead battery can keep one from starting. If it won't start from the hardware disc or the install disc then you have hardware problems. I'd start by making sure the hard drive is spinning up which gives you an indication if the power supply is putting anything out. If the hard drive is spinning I'd unhook it and try the hardware disc and install disc. If it still won't boot I'd unhook the optical drive and hook the hard drive back up and try it. If none of that works then you probably have logic board or power supply problems or both. Tom

  • Dual monitor setup and intel help

    Hello
    I am trying to set up and dual monitor setup here, with a monitor and a tv, the monitors resolution is 1680x1050, the tv's resolution is 1360x720, which results in that the desktop will have an resolution on 3040x1050.
    When I try to do this with GNOME's xrandr gui, I get this:
    required virtual size does not fit available size: requested=(3040, 1050), minimum=(320, 200), maximum=(1920, 1920)
    When looking in the motherboards manual, it states that each out of my graphics card can do a resolution of 1980x1080. Is the intel driver missunderstanding something? Since both the dvi and hdmi output only delivers 1360x720 and 1680x1050, 3040x1050 is only an virtual resolution.
    Any suggestions?

    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    Screen 1 "Screen1" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "record"
    Load "dbe"
    Load "extmod"
    Load "glx"
    Load "dri"
    Load "dri2"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbLayout" "no"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "intel"
    VendorName "Intel Corporation"
    BoardName "4 Series Chipset Integrated Graphics Controller"
    BusID "PCI:0:2:0"
    Option "AccelMethod" "exa"
    Option "MigrationHeuristic" "greedy"
    EndSection
    Section "Device"
    Identifier "Card1"
    Driver "intel"
    VendorName "Intel Corporation"
    BoardName "4 Series Chipset Integrated Graphics Controller"
    BusID "PCI:0:2:1"
    Option "AccelMethod" "exa"
    Option "MigrationHeuristic" "greedy"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "Card1"
    Monitor "Monitor1"
    Option "LeftOf" "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "ServerFlags"
    Option "AutoAddDevices" "False"
    EndSection
    Uhm do I only need one Screen section?

  • Dual 9800GTX+'s not working

    Ok I am running XP x64 SP2 with the Speedster w/o a on-board video, Updated BIOS to the BIOS the allows dual Quad Cores.  I have 2 NVIDIA 9800 GTX+'s and I have them installed in both PCI-E slots.  Now I am unable to get the other card to even be seen by windows.  I have tried a number of things including beta drivers for SLI multi monitor,  Updating drivers a number of times.  disabling SLI. and still no additional GC
    Any ideas?
    Here is a better list of things I have tried: http://forums.nvidia.com/index.php?showtopic=84281&st=0&p=477646&#entry477646

    Quote from: jus71n742 on 30-December-08, 05:16:58
    Well it may not be OS cause that same PSU supplied to Win Pro 32bit and never had an issue.  I Ran Memtest w/o and OS and nothing errored.  So I am thinking I prob need to ditch 3 of those rails.  SHould have read more into the PSU when I was doing the research for my build.  I will run Orthos next
    Orthos would run for about 10-15 min and then Shutdown...never crashed but would just power down.  So that mean that it is most likely a PSU problem?
    Another Question...Why would Windows crash and/or shutdown while Linux would only power down?
    "Orthos would run for about 10-15 min and then Shutdown...never crashed but would just power down.  So that mean that it is most likely a PSU problem?"
    One of the CPU's is overheating or weak/defective PSU.
    I've told you to watch out CPU underload temp during Orthos testing too.

  • Dual DVD's not mounting in 10.3.9

    I have read countless posts in which for various reasons DVD's don't mount. There is a special case where older DVD's do mount, but newer ones (dual layer format, favored by Hollywood) do not. That is my case. People are invaribly advised to invest in a new optical drive.
    I was suspicious, and decided to try restarting my older eMac in 9.2. Of course it's the same drive, just being driven by different software. All DVD's mount and play fine in 9.2.
    Now, I know that not everybody has the option these days of booting up in 9.2. But at least I can scientifically state that the problem has to be software, not hardware.

    Welcome to the discussions.
    Maybe I can give you some information on your problem.
    Many of the newer Optical Drives are in fact crippled by the Firmware. This is done because of the restrictions placed on many computers by the manufactures for copyright reasons.
    Older Operating Systems were not affected by these firmware restrictions, not until the advent of all of the DVD copying, were these firmware restrictions added, to avoid Lawsuits.
    DUAL LAYER technolgy can be read and copied by many of the newer Optical Drives. But as you have correctly figured out the restrictions are implamented by FIRMWARE that cripple many of these functions.
    Older Commercial DVD's can be read and copied with NO problems, but as time went by the Motion Picture Industry ADDED more and more encryption and security to there DVD's to hinder the ability to copy there product.
    There are of course many of the Newer Optical Drives that are known as Region Free that will allow many of the imposed restrictions to be bypassed.
    There are a couple of different options, one is to use a different Player, VLC
    http://www.versiontracker.com/dyn/moreinfo/macosx/14738
    This option only works on some DVD's
    The other option is for you to Rip the DVD and re-copy it and remove all the security and encrytions, this allow it to play.
    http://www.macweaver.com/dvdinfo/
    Cheers Don

  • M92p DisplayPort to dual Displayport adapter not working

    I have purchased several M92p tiny computers and had great success with them. however, we are wanting to start hooking up 4 monitors as advertised using the “Displayport to Dual Displayport adapters” to connect two identical monitors to a single displayport on the PC. When we hook up this adapter neither monitor connect. The status lights on the adapter for each displayport just blinks green (I assume they should be solid green lights). Does anyone have any idea what is going on with these adapters or can locate any technical documenation for them. I have verified the displayports on the computers work by connecting monitors directly to them, I have tried several different display driver options since the device doesnt have any drivers, and different types of monitors. I have called lenovo support and they say everything is working as designed… ( yet nothing displays… at all…) Any suggestions or help is greatly appricated.

     Bigg, Here is a quote from Lenovo's website regarding the tiny form factor...
    "Multiple Monitor Display
    Maximize productivity with independent display support for up to three independent displays or Mosaic quad display. The expanded work area and easier navigation between applications helps reduce errors and improve productivity as you extend your desktop across monitors. (Requires optional second DisplayPort connector.)"
    http://shop.lenovo.com/us/en/desktops/thinkcentre/m-series-tiny/m92p/#features
    in the next post you can see in the image I uploaded that I have two DP and one VGA... I would think I am missing something but I cannot figure it out...

Maybe you are looking for

  • Sticky Menu Bar

    I've noticed the past few weeks that my menu bar doesn't change when I switch applications by clicking on a window.  The window becomes active, but the menu bar stays on the old application, and becomes unresponsive.  It seems extremely sporadic, but

  • Change XP Look and Feel Rollover Highlight Color

    Is it possible to change the orange rollover highlight color that is used in the Windows XP Look and Feel? If so, how? I want to change it in once place and see the results on every component in my application.

  • Will I lose iLife if I  erase and re-install OSX ML??

    Hi, I want to do a clean re-installation of OS X Mountain Lion and i wanted to know if i would lose iLife if I do so. I also wanted to know if i could selectively re-install some apps from a time-machine backup, without restoring my Mac from the time

  • What's the Best Securirty Lock for Powerbook?

    I just got the new 17" PowerBook and am looking to buy the best security lock cable for it. I have read some posts before indicating some locks damaged their PowerBooks. I would appreciate your comments on your experiences and your recommendations. T

  • PPro2 best bitrates for transcoding in AME to DVD

    Hello. I have created a 165-minute movie (including 8 minutes of motion menus) to be authored with menus/chapters in TMPG Authoring Works 4.  I'm exporting from PPro2 via Adobe Media Encoder for transcoding to mp2, and have space left over due to my