2.0.1.1.0 Patch is out
Dear beekeepers,
it might be interesting for most of you to know that patchset 2.0.1.1.0 is out (patch 8998918 from metalink).
Hm, why does http://www.oracle.com/technology/products/beehive/patchdoc/beehive_20110_readme.htm have no list of "Resolved Issues"?
Regards, Thomas
And since last weekend, there is already 2.0.1.2.0 Cumulative Patch Set available (MOS patch 9443518).
Regards, Thomas
Similar Messages
-
Hi all,
Would like to find out on patching process on inline posture node.
My topology is one ISE appliance node type is Admin/Policy Service Node; while another unit is inline posture node.
Both appliance have the identical software versiona and patch, namely 1.1.3.124, patch 2
I would like to update it to patch version 4.
My question:
01. If i apply the patch on the Admin/Polic Service Node using GUI patch maangement, will this also apply the patch to Inline Posture node?
02. Or should i use console into Inline Posture node and using CLI way to update the patch? Anything i should mention in this process, example: stop application etc?
Please advice, million thanks
NoelResolved Issues in Cisco ISE Version 1.1.0.665—Cumulative Patch 4
Lists the issues that are resolved in Cisco Identity Services Engine Maintenance Release 1.1.0.665 cumulative patch 4.
You must deploy this patch on Cisco Identity Services Engine Maintenance Release 1.1.0.665 (with or without patch 1, 2, and 3 applied), otherwise the patch install will fail and Cisco ISE will return an error message stating, "This patch is intended to be installed on ISE 1.1.0.665."
To obtain the patch file necessary to apply the patch to Cisco ISE Release 1.1, log into the Cisco Download Software site at http://www.cisco.com/cisco/software/navigator.html?a=a&i=rpm (you might be required to provide your Cisco.com login credentials), navigate to Security > Access Control and Policy > Cisco Identity Services Engine > Cisco Identity Services Engine Software, and save a copy of the patch file to your local machine. Then refer to the "Installing a Software Patch" section of the "Administering Cisco ISE" chapter of the Cisco Identity Services Engine User Guide, Release 1.1. for instructions on how to apply the patch to your system.
If you experience problems installing the patch, please contact Cisco Technical Assistance Center.
Cisco ISE Patch Version 1.1.0.665—Patch 4 Resolved Caveats
Caveat
Description
CSCui22841
Apache Struts2 command execution vulnerability
Cisco ISE includes a version of Apache Struts that is affected by the vulnerabilities identified by the following Common Vulnerability and Exposures (CVE) IDs: CVE-2013-2251. This fix addresses the potential impact on this product.
Managing Software Patches
You can install patches on ISE servers in your deployment from the primary administration node. ISE patches are usually cumulative; however, any restrictions on the patch installation will be described in the README file that will be included with the patch. Cisco ISE allows you to perform patch installation and rollback from either the command-line interface (CLI) or GUI.
Standalone Deployment
When you install or roll back a patch from a standalone or primary administration node, ISE restarts the
Application. You might have to wait for a few minutes before you can log back in.
Distributed Deployment
When you install or roll back a patch from the primary administration node that is part of a distributed deployment, Cisco ISE installs the patch on the primary and all the secondary nodes in the deployment. If the patch installation is successful on the primary node, Cisco ISE then proceeds to the secondary nodes. If it fails on the primary node, the installation is aborted. However, if the installation fails on any of the secondary nodes for any reason, it still continues with the next secondary node in your deployment.
Installing a Software Patch.
Please check the below link for step by step installation.
http://www.cisco.com/en/US/docs/security/ise/1.1/user_guide/ise_admin.pdf -
Hi
I have been applying a patch in hotpatch mode on oracle ebs 12.2.3 environment.
but it is erroring out as
error = Cannot open XML file for load
errorno = A file or directory in the path name does not exist.
while applying patch with adop , it copies the context files from all nodes to patch log directory.
what I checked is, in my case, it is not able to copy one of the context file. that is why this error.
our enviroment is :
app: 12.2.3
DB: 11.2.0.3
OS: IBM AIX 6.1 64 bit
ThanksI have been applying a patch in hotpatch mode on oracle ebs 12.2.3 environment.
but it is erroring out as
error = Cannot open XML file for load
errorno = A file or directory in the path name does not exist.
What is the patch number?
What is the complete error message?
Does the patch README file or any MOS Doc instruct to apply this patch in hotpatch mode?
while applying patch with adop , it copies the context files from all nodes to patch log directory.
what I checked is, in my case, it is not able to copy one of the context file. that is why this error.
Did adop fail? At what stage? Please provide more details about the patch and upload all log files for us to review.
Thanks,
Hussein -
So ELP patch is out, but my MBP keeps skipping Letters (HLP problem?)
As you know, there is a lot of people with ELP problem PLUS some randomly skipped letters (for example "alocco" instead of "allocco", "abc34" instead of "abc345").
Now, having ELP problem solved, it would be better to open a new thread concerning the other part of the problem.
Did anyone hear anything about any solution? Local customer care told it is MS Office API'S fault (LOL) and wanted to format.... I have no spare time to lose with these strange ideas.
I'm gonna ask and PRETEND for a substitution when the new penryn models come out.Do you enjoy responding to your own posts? Anyway, I do have the problem you describe and, of course, the keyboard fix did absolutely nothing to fix it. With my MBP, it seems it's mostly the leter "t" that doesn't register ... as in the word "letter" I just typed missing the "t" that I know I typed. Most frequently, it happens at he beginning of a word ... the word "the" frequently comes out as "he" and spell check doesn't cach it. Ha ... another missing "t". I have to say this really bites and it might well be my first, and last Mac.
Message was edited by: cycler48 -
I have upgraded to 10.6.8. It's a disaster, when's the patch coming out?
Safari crashes on startup with a sigsegv, airport is dropping connections, dashboard crashes... Pretty much any apple apps that need a network connection crash on startup.
Did you use the combo updater and follow the good updating practices?
Download the combo updater here:
http://support.apple.com/kb/DL1399
After download, unplug all peripherals except keyboard and mouse.
Open Disk Utility and verify disk
Install combo update
Open Disk Utility and repair permissions
Restart again.
Plug in peripherals. -
Seems to be quite straight forward installing via the instructions. You must run a clean environment thou..one thing that I am finding is that things like 'wget' and 'jar' must be in the directories that they want .. they are hardcoded in the downloaded install script.
I have add success just updating the database and setting the metrics.
Here is a query I use to see the data ..
select
target_type,
target_name,
metric_column Metric,
metric_name || ' ' || key_value Name,
decode(warning_threshold,' ',null, decode(warning_operator,'Equal To','=','Not Equal','!=','Greater Than','>','Less Than','<',warning_operator) || ' ' || warning_threshold) Warning,
decode(critical_threshold,' ', null, decode(critical_operator,'Equal To','Not Equal','!=','=','Greater Than','>','Less Than','<',critical_operator) || ' ' || critical_threshold) Critical
from mgmt$metric_collection m
where
target_type = 'oracle_database'
and target_name like 'Q%'
and metric_column = 'pctUsed'
order by 1,3,2 -
Error while patching OIM with BP06
Hi ,
I am facing error while patching OIM 11.1.1.5.0 with BP 06.
Please see the logs below:-
patch:
[input] skipping input as property weblogic_password has already been set.
[echo] unzipping the archives.....
explode-archived-apps:
[delete] Deleting directory /apps/oracle/middleware/Oracle_IDM1/server/apps/oim.ear
[delete] Deleting directory /apps/oracle/middleware/Oracle_IDM1/server/apps/Nexaweb.ear
[mkdir] Created dir: /apps/oracle/middleware/Oracle_IDM1/server/apps/oim.ear
[mkdir] Created dir: /apps/oracle/middleware/Oracle_IDM1/server/apps/Nexaweb.ear
[unzip] Expanding: /apps/oracle/middleware/Oracle_IDM1/server/patching/oim.ear into /apps/oracle/middleware/Oracle_IDM1/server/apps/oim.ear
[unzip] Expanding: /apps/oracle/middleware/Oracle_IDM1/server/patching/Nexaweb.ear into /apps/oracle/middleware/Oracle_IDM1/server/apps/Nexaweb.ear
[echo] archives unzipped successfully.....
[echo] seeding the out of the box jobs into db
seed-ootb-jobs:
seed-ootb-jobs:
[echo] ----> SEEDING OUT OF THE BOX SCHEDULE JOBS AND TRIGGERS
[java] Mar 25, 2013 7:32:31 PM org.quartz.core.QuartzScheduler <init>
[java] INFO: Quartz Scheduler v.1.6.0 created.
[java] Mar 25, 2013 7:32:31 PM org.quartz.impl.jdbcjobstore.JobStoreSupport initialize
[java] INFO: Using thread monitor-based data access locking (synchronization).
[java] Mar 25, 2013 7:32:31 PM org.quartz.impl.jdbcjobstore.JobStoreSupport cleanVolatileTriggerAndJobs
[java] INFO: Removed 0 Volatile Trigger(s).
[java] Mar 25, 2013 7:32:31 PM org.quartz.impl.jdbcjobstore.JobStoreSupport cleanVolatileTriggerAndJobs
[java] INFO: Removed 0 Volatile Job(s).
[java] Mar 25, 2013 7:32:31 PM org.quartz.impl.jdbcjobstore.JobStoreTX initialize
[java] INFO: JobStoreTX initialized.
[java] Mar 25, 2013 7:32:31 PM org.quartz.impl.StdSchedulerFactory instantiate
[java] INFO: Quartz scheduler 'OIMQuartzScheduler' initialized from an externally provided properties instance.
[java] Mar 25, 2013 7:32:31 PM org.quartz.impl.StdSchedulerFactory instantiate
[java] INFO: Quartz scheduler version: 1.6.0
[java] Mar 25, 2013 7:32:36 PM org.quartz.core.QuartzScheduler shutdown
[java] INFO: Scheduler OIMQuartzScheduler_$_NON_CLUSTERED shutting down.
[java] Mar 25, 2013 7:32:36 PM org.quartz.core.QuartzScheduler standby
[java] INFO: Scheduler OIMQuartzScheduler_$_NON_CLUSTERED paused.
[java] Mar 25, 2013 7:32:36 PM org.quartz.core.QuartzScheduler shutdown
[java] INFO: Scheduler OIMQuartzScheduler_$_NON_CLUSTERED shutdown complete.
[echo] ----> SEEDING COMPLETE LOG FILE
[echo] ----> LOG FILE : ${work.dir}
[echo] jobs seded succefully.....
[echo] updating the oes out of the box policies in oim db
update-oes-ootb-policies:
update-oes-ootb-policies:
[echo] ----> UPDATING OUT OF THE BOX OES POLICIES
[java] [EL Info]: 2013-03-25 19:32:45.952--ServerSession(139722802)--EclipseLink, version: Eclipse Persistence Services - 1.1.0.r3634
[java] [EL Info]: 2013-03-25 19:32:48.824--ServerSession(139722802)--file:/apps/oracle/middleware/Oracle_IDM1/modules/oracle.oes_11.1.1/jps-internal.jar-JpsDBDataManager login successful
[echo] ----> SEEDING COMPLETE LOG FILE
[echo] ----> LOG FILE : /apps/oracle/middleware/Oracle_IDM1/server/seed_data/Seed/OESPolicies
[echo] oes policies updated successfully..
[echo] upgrading the oes-ootb policies accordin g to the patched xml
upgrade-oes-ootb-policies:
upgrade-oes-ootb-policies:
[echo] ----> UPDATING OUT OF THE BOX OES POLICIES
[java] java.io.IOException: No such file or directory
[java] at java.io.UnixFileSystem.createFileExclusively(Native Method)
[java] at java.io.File.createNewFile(File.java:883)
[java] at oracle.iam.authzpolicydefn.loader.PolicyLoadDataLogger.createLogFile(PolicyLoadDataLogger.java:68)
[java] at oracle.iam.authzpolicydefn.loader.PolicyLoader.main(PolicyLoader.java:196)
[java] Exception in thread "Main Thread" java.lang.NullPointerException
[java] at java.lang.Throwable.printStackTrace(Throwable.java:508)
[java] at oracle.iam.authzpolicydefn.loader.PolicyLoadDataLogger.createLogFile(PolicyLoadDataLogger.java:73)
[java] at oracle.iam.authzpolicydefn.loader.PolicyLoader.main(PolicyLoader.java:196)
BUILD FAILED
/apps/oracle/middleware/Oracle_IDM1/server/setup/deploy-files/setup.xml:94: The following error occurred while executing this line:
/apps/oracle/middleware/Oracle_IDM1/server/setup/deploy-files/setup.xml:215: The following error occurred while executing this line:
/apps/oracle/middleware/Oracle_IDM1/server/seed_data/seed-rcu-data.xml:136: Java returned: 1
Total time: 2 minutes 25 seconds
I have seen similar error on forum but it has not been answered.
I have set all variables correctly and the directory has all permissions as well.
Please let me know what I am missing here.
Thanks in advance.Hi,
Thanks for your help.
The directory was already created during patch execution.
My error was related to MDS password.
The password for mds was different from OIM password so the patch errored out.
Once the mds password was updated correctly in the profile file, the patch executed successfully. -
Oracle BI Apps - EBS R12 Full load - manually i.e. with out DAC??
Hi All,
I tried BI Apps 7.9.6.2 installation, I am stuck with a [DAC error|https://forums.oracle.com/forums/thread.jspa?threadID=2358072&tstart=15] , the solution is to install a DAC patch. I don't have any Oracle support account & can't afford one, so installing the patch is out of question. Now my plan is to execute Informatica workflows manually........What are your thoughts on this? Is it a bad idea that takes 6 months at least and not guaranteed?
Please give me your suggestions or point me to any materials that helps me in this path.......
Thanks for your time,
DKHi
I think you need to add the following parameter to informatica,
in the admin console go to custom properties
add
overrideMpltVarWithMapVar value yes
thx -
Oracle 9i iDS (9.0.2.0.1) Core / Non-Core Patches
Hello,
I realise that there are at least 3 patches available out there for Oralce 9i iDS (9.0.2.0.1) running on Windows XP Pro.
I am working with WebForms/WebReports migration project from 6i to 9i and running into all sort of errors. I get the feeling that many of my problems are already addressed by some Patches out there.
I am aware of the followin patches:
PatchSet 1: 2705870
PatchSet 2: 2842923
PatchSet 3: 3129219 (Non-Core PatchSet, PreRequisite Patch: 3038037)
I tried to apply PatchSet 3 directly without applying PatchSet1 / 2 not the Prerequisite Patch 3038037.
1) Can I apply the prerequisite patch 3038037 after Patchset 3 3129219 ?
PT
PS: I heard that Oracle was suppose to come out with PatchSet 4 earlier this year in January. Any word on that ? the patchset number ?I have solved this problem.
When I run the patch setup.exe again, I should select Destination Name: OraHome92 rather than the Developer Suite's Oracle Home "Ora9iDS".
The patch installation is successfully completed.
I have also installed Designer Repository on a remote Oracle9i Release 1 Database server. Can I applied this patch from another machine and remote logon to the database server and perform the patch installation?
Or I have to install the Patch on the Oracle9i Release 1 Database Server resided in a Windows 2000 Server. -
Lookup the patch id of one library.
Hi, People under Sun Shine.
I have a question which may be simple to you guys. That is:
How can I know the patchid of a library? For example, I want to the patchid of /usr/lib/libc.so.1 in a box.
I am resolving a issue that the production box (Solaris 2.8)has a different level than my test environment. I pinpointed that the problem is caused by /usr/lib/libc.so.1, which is different from the test box. In order to convince my clients to do upgrade, I have to show them that their patches are out of date from the latest.
Or I might try to shift the library with the application, but I think my client will not like the ideas. Any advice?
Thanks,
--yeYe,
patchadd -p should bring you a list of
installed patches
In case you want to check specific binary
you may try this one
mcs -p <filename>
Here what it shows for me:
prompt> mcs -p /usr/lib/libc.so.1
/usr/lib/libc.so.1:
@(#)SunOS 5.8 Generic 108991-18 September 2001
Regards,
Cyril
Hi, People under Sun Shine.
I have a question which may be simple to you guys.
That is:
How can I know the patchid of a library? For example,
I want to the patchid of /usr/lib/libc.so.1 in a box.
I am resolving a issue that the production box
(Solaris 2.8)has a different level than my test
environment. I pinpointed that the problem is caused
by /usr/lib/libc.so.1, which is different from the
test box. In order to convince my clients to do
upgrade, I have to show them that their patches are
out of date from the latest.
Or I might try to shift the library with the
application, but I think my client will not like the
ideas. Any advice?
Thanks,
--ye -
Patch for sunray 2s on srss 3.1
Anybody know if the sound patch is out there? Will srss 4 fix this problem?
My new sunray 2s just arrived but the sound configuration tool does not work with them.
I saw a reference to the patch through google but the sun website makes no mention of a patch (last blog on sun about it was aug 2006).With SRSS installed in a mixed mode setup with 64bit system but 32bit
libraries available, I ended having problems with the 32bit pam modules
included with srss.The build of GDM supplied with SRSS is a 32-bit executable and therefore requires 32-bit PAM modules. If you're trying to use the distro's native 64-bit GDM then obviously those modules won't work.
(The SRSS GDM daemon is 32-bit but SRSS delivers 32- and 64-bit GDM greeter executables and runs the appropriate one automatically. That gets around some missing 32-bit Gnome libraries on the supported 64-bit platforms.)
Is a linux 64bit SRSS scheduled?SRSS 3.1.1 and SRSS 4.0 (currently in beta) are supported on 32-bit and 64-bit RHAS4 and SLES9. SRSS is not supported on any other distros. If you want to try to install and run SRSS on other distros that's fine, but Sun won't provide assistance or support.
You might try asking on the sunray-users mailing list at <http://www.filibeto.org/sun/sunray-users/>. Some people on that list run SRSS on unsupported distros. -
Hi
we are upgrading our instacne from 12.0.6 to 12.1 and then 12.1.2
all steps to make Base Release for 12.1 is done sucessfully
when we apply patch 7303033 to upgrade 12.1 to 12.1.2 the patch error out
here showing the Autopatch logfile
************* Start of AutoPatch session *************
AutoPatch version: 12.0.0
AutoPatch started at: Sun Jun 06 2010 23:57:32
APPL_TOP is set to /oracle/PROD/apps/apps_st/appl
NLS_LANG value from the environment is : American_America.AR8MSWIN1256
NLS_LANG value for this AD utility run is : AMERICAN_AMERICA.AR8MSWIN1256
You can be notified by email if a failure occurs.
Do you wish to activate this feature [No] ? No
Please enter the batchsize [1000] : 1000
Please enter the name of the Oracle Applications System that this
APPL_TOP belongs to.
The Applications System name must be unique across all Oracle
Applications Systems at your site, must be from 1 to 30 characters
long, may only contain alphanumeric and underscore characters,
and must start with a letter.
Sample Applications System names are: "prod", "test", "demo" and
"Development_2".
Applications System Name [upg] : upg *
NOTE: If you do not currently have certain types of files installed
in this APPL_TOP, you may not be able to perform certain tasks.
Example 1: If you don't have files used for installing or upgrading
the database installed in this area, you cannot install or upgrade
the database from this APPL_TOP.
Example 2: If you don't have forms files installed in this area, you cannot
generate them or run them from this APPL_TOP.
Example 3: If you don't have concurrent program files installed in this area,
you cannot relink concurrent programs or generate reports from this APPL_TOP.
Do you currently have files used for installing or upgrading the database
installed in this APPL_TOP [YES] ? YES *
Do you currently have Java and HTML files for HTML-based functionality
installed in this APPL_TOP [YES] ? YES *
Do you currently have Oracle Applications forms files installed
in this APPL_TOP [YES] ? YES *
Do you currently have concurrent program files installed
in this APPL_TOP [YES] ? YES *
Please enter the name Oracle Applications will use to identify this APPL_TOP.
The APPL_TOP name you select must be unique within an Oracle Applications
System, must be from 1 to 30 characters long, may only contain
alphanumeric and underscore characters, and must start with a letter.
Sample APPL_TOP Names are: "prod_all", "demo3_forms2", and "forms1".
APPL_TOP Name [upgrade] : upgrade *
You are about to apply a patch to the installation of Oracle Applications
in your ORACLE database 'upg'
using ORACLE executables in '/oracle/PROD/apps/tech_st/10.1.2'.
Is this the correct database [Yes] ? Yes
AutoPatch needs the password for your 'SYSTEM' ORACLE schema
in order to determine your installation configuration.
Enter the password for your 'SYSTEM' ORACLE schema: *****
Connecting to SYSTEM......Connected successfully.
The ORACLE username specified below for Application Object Library
uniquely identifies your existing product group: APPLSYS
Enter the ORACLE password of Application Object Library [APPS] : *****
AutoPatch is verifying your username/password.
Connecting to APPLSYS......Connected successfully.
The status of various features in this run of AutoPatch is:
<-Feature version in->
Feature Active? APPLTOP Data model Flags
CHECKFILE Yes 1 1 Y N N Y N Y
PREREQ Yes 6 6 Y N N Y N Y
CONCURRENT_SESSIONS No 2 2 Y Y N Y Y N
PATCH_TIMING Yes 2 2 Y N N Y N Y
PATCH_HIST_IN_DB Yes 6 6 Y N N Y N Y
SCHEMA_SWAP Yes 1 1 Y N N Y Y Y
JAVA_WORKER Yes 1 1 Y N N Y N Y
CODELEVEL Yes 1 1 Y N N Y N Y
Connecting to SYSTEM......Connected successfully.
Connecting to APPLSYS......Connected successfully.
Identifier for the current session is 34811
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
AutoPatch warning:
Product Data File
/oracle/PROD/apps/apps_st/appl/admin/zfaprod.txt
does not exist for product "zfa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/oracle/PROD/apps/apps_st/appl/admin/zsaprod.txt
does not exist for product "zsa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/oracle/PROD/apps/apps_st/appl/admin/jtsprod.txt
does not exist for product "jts".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
Reading database to see what industry is currently installed.
Reading FND_LANGUAGES to see what is currently installed.
Currently, the following languages are installed:
Code Language Status
US American English Base
AR Arabic Install
Reading language information from applAR.txt ...
Your base language will be AMERICAN.
Your other languages to install are: ARABIC
Setting up module information.
Reading database for information about the modules.
Saving module information.
Reading database for information about the products.
Connecting to SYSTEM......Connected successfully.
Connecting to APPLSYS......Connected successfully.
Connecting to SYSTEM......Connected successfully.
Reading database for information about how products depend on each other.
Connecting to APPLSYS......Connected successfully.
Reading topfile.txt ...
Saving product information.
Connecting to SYSTEM......Connected successfully.
Connecting to APPLSYS......Connected successfully.
AD code level : [B.2]
STRT_TASK: [AutoPatch startup after aimini] [] [Sun Jun 06 2010 23:57:47]
Connecting to APPS......Connected successfully.
STRT_TASK: [Validate schema passwords] [] [Sun Jun 06 2010 23:57:47]
Connecting to APPLSYS......Connected successfully.
Connecting to APPS......Connected successfully.
STOP_TASK: [Validate schema passwords] [] [Sun Jun 06 2010 23:57:47]
STRT_TASK: [Upload Patch History information from filesystem] [] [Sun Jun 06 2010 23:57:47]
Trying to obtain a lock...
About to attempt instantiating the current-view snapshot: Sun Jun 06 2010 23:57:47
Attempting to instantiate the current-view snapshot...
Was already instantiated. So no instantiation done this time.
Done attempting to instantiate the current-view snapshot: Sun Jun 06 2010 23:57:47
**************** S T A R T O F U P L O A D ****************
Start date: Sun Jun 06 2010 23:57:47
0 "left over" javaupdates.txt files uploaded to DB: Sun Jun 06 2010 23:57:47
0 patches uploaded from the ADPSV format patch history files: Sun Jun 06 2010 23:57:47
Uploading information about files copied during the previous runs ...
0 "left over" filescopied_<session_id>.txt files uploaded to DB: Sun Jun 06 2010 23:57:47
****************** E N D O F U P L O A D ******************
End date: Sun Jun 06 2010 23:57:47
STOP_TASK: [Upload Patch History information from filesystem] [] [Sun Jun 06 2010 23:57:47]
Enter the directory where your Oracle Applications patch has been unloaded
The default directory is [oracle/Upgrade_box/patches_12.1.2/7303033/7303033] : /oracle/Upgrade_box/patches_12.1.2/7303033/7303033
STOP_TASK: [AutoPatch startup after aimini] [] [Sun Jun 06 2010 23:57:50]
Please enter the name of your AutoPatch driver file : u7303033.drv
STRT_TASK: [Run a single patch driver file] [] [Sun Jun 06 2010 23:58:03]
STRT_TASK: [Steps before copy portion] [] [Sun Jun 06 2010 23:58:03]
STRT_TASK: [Initial driver processing steps] [] [Sun Jun 06 2010 23:58:03]
Start time for driver file is: Sun Jun 06 2010 23:58:03
STOP_TASK: [Initial driver processing steps] [] [Sun Jun 06 2010 23:58:03]
STRT_TASK: [Get Oracle Applications Release and read driver file] [] [Sun Jun 06 2010 23:58:03]
STRT_TASK: [Get Oracle Applications Release] [] [Sun Jun 06 2010 23:58:03]
Getting Oracle Applications Release...
Connecting to APPLSYS......Connected successfully.
Current installed release is 12.1.1
Connecting to APPS......Connected successfully.
STOP_TASK: [Get Oracle Applications Release] [] [Sun Jun 06 2010 23:58:03]
STRT_TASK: [Process patch driver file] [] [Sun Jun 06 2010 23:58:03]
Reading patch driver file...
Connecting to SYSTEM......Connected successfully.
STRT_TASK: [Parse and load patch driver file] [] [Sun Jun 06 2010 23:58:03]
Connecting to APPS......Connected successfully.
Parsing and loading patch driver file...
Processing line 10000.
Processing line 20000.
Processing line 30000.
Processing line 40000.
Processing line 50000.
Processing line 60000.
Processing line 70000.
Processing line 80000.
Processing line 90000.
Processing line 100000.
Processing line 110000.
Processing line 120000.
Processing line 130000.
Processing line 140000.
Processing line 150000.
Processing line 160000.
Processing line 170000.
Processing line 180000.
Processing line 190000.
199181 lines processed.
STOP_TASK: [Parse and load patch driver file] [] [Sun Jun 06 2010 23:58:07]
STRT_TASK: [Check patch integrity] [] [Sun Jun 06 2010 23:58:07]
Not checking patch integrity as integrity checking flag is turned off.
STOP_TASK: [Check patch integrity] [] [Sun Jun 06 2010 23:58:07]
Successfully read patch driver file.
STOP_TASK: [Process patch driver file] [] [Sun Jun 06 2010 23:58:07]
STRT_TASK: [Other driver and release-related logic] [] [Sun Jun 06 2010 23:58:07]
Determining target release...
Current target release is 12.1.1
STOP_TASK: [Other driver and release-related logic] [] [Sun Jun 06 2010 23:58:07]
STOP_TASK: [Get Oracle Applications Release and read driver file] [] [Sun Jun 06 2010 23:58:07]
STRT_TASK: [Prereq checking logic] [] [Sun Jun 06 2010 23:58:07]
Warning:
The description for the entity 'dna' in the patch driver
does not match with the current description.
The current description is :'Development'
The description in the patch is :'Product Workbench'
The current description will not be changed.
Warning:
The description for the entity 'iby' in the patch driver
does not match with the current description.
The current description is :'iPayment'
The description in the patch is :'Payments'
The current description will not be changed.
Warning:
The description for the entity 'izu' in the patch driver
does not match with the current description.
The current description is :'Support Diagnostic Tools'
The description in the patch is :'Oracle E-Business Suite Diagnostics'
The current description will not be changed.
For the Current View:
l_appl_top_id .............. 192
l_eav_patch_release_name ... 12.0.0
Current View - 7303033:US is NOT_APPLIED
STOP_TASK: [Prereq checking logic] [] [Sun Jun 06 2010 23:58:07]
STRT_TASK: [Ask translated patch question] [] [Sun Jun 06 2010 23:58:07]
This base patch contains files which may require translation
depending on the languages you currently have installed.
Oracle Corporation recommends that you obtain any translated versions of this
patch for each of your non-US languages PRIOR to applying this base patch.
The translated version of the patch should be applied immediately AFTER
applying this base patch.
Do you wish to apply this patch now [No] ? yes
STOP_TASK: [Ask translated patch question] [] [Sun Jun 06 2010 23:58:14]
STRT_TASK: [Determine bugs to apply] [] [Sun Jun 06 2010 23:58:14]
Determining which bug fixes to apply...
Turning off bug fixes for products not installed or shared in the database...
Resetting bug actions for bug fixes we will not apply...
Processing files for Oracle Government Applications...
Done determining which bug fixes to apply.
Log and Info File sync point:
Sun Jun 06 2010 23:58:14
Turning off actions that reference unrecognized products.
Log and Info File sync point:
Sun Jun 06 2010 23:58:15
End of unrecognized products checking.
STOP_TASK: [Determine bugs to apply] [] [Sun Jun 06 2010 23:58:15]
STRT_TASK: [Process action options] [] [Sun Jun 06 2010 23:58:15]
STOP_TASK: [Process action options] [] [Sun Jun 06 2010 23:58:15]
STRT_TASK: [Modify actions for bootstrap mode] [] [Sun Jun 06 2010 23:58:15]
STOP_TASK: [Modify actions for bootstrap mode] [] [Sun Jun 06 2010 23:58:15]
STRT_TASK: [Ask for number of parallel workers] [] [Sun Jun 06 2010 23:58:15]
Connecting to SYSTEM......Connected successfully.
Connecting to APPS......Connected successfully.
AD utilities can support a maximum of 999 workers. Your
current database configuration supports a maximum of 88 workers.
Oracle recommends that you use between 4 and 8 workers.
Enter the number of parallel workers [4] : 4
STOP_TASK: [Ask for number of parallel workers] [] [Sun Jun 06 2010 23:58:21]
AutoPatch will run in parallel mode.
STOP_TASK: [Steps before copy portion] [] [Sun Jun 06 2010 23:58:21]
STRT_TASK: [Copy portion steps] [] [Sun Jun 06 2010 23:58:21]
STRT_TASK: [apply new applterr.txt] [] [Sun Jun 06 2010 23:58:21]
Did not need to apply new applterr.txt.
STOP_TASK: [apply new applterr.txt] [] [Sun Jun 06 2010 23:58:21]
STRT_TASK: [AutoSplice applprod.txt and applUS.txt] [] [Sun Jun 06 2010 23:58:21]
Applying new applprod.txt (if any)...
Did not need to apply new applprod.txt.
STOP_TASK: [AutoSplice applprod.txt and applUS.txt] [] [Sun Jun 06 2010 23:58:27]
STRT_TASK: [Version checking for driver files] [] [Sun Jun 06 2010 23:58:27]
Performing version checking for driver files...
Log and Info File sync point:
Sun Jun 06 2010 23:58:33
AutoPatch found some files which it will not apply.
These files are listed in the AutoPatch informational message file.
STOP_TASK: [Version checking for driver files] [] [Sun Jun 06 2010 23:58:39]
STRT_TASK: [Copy driver files] [] [Sun Jun 06 2010 23:58:39]
Copying driver files into installation area...
You are running admvcode
Header information is:
$Header: aiopatch.lc 120.7 2007/12/03 08:27:09 nissubra ship $
Start of admvcode session
Date/Time is Sun Jun 06 2010 23:58:41
Filelist file is: /oracle/PROD/apps/apps_st/appl/admin/upg/out/copymast.txt
Patch Character Set is: us7ascii
On-site Character Set is: AR8MSWIN1256
Log and Info File sync point:
Sun Jun 06 2010 23:58:41
Information about files copied to the APPL_TOP would be written to the
informational message file.
Character set 'US7ASCII' is a subset of character set 'AR8MSWIN1256'.
No character set conversion is required.
Copying files to APPL_TOP...
0 directories created.
124 files copied without character set conversion.
0 files copied with successful character set conversion.
124 files copied successfully.
0 files had fatal errors.
admvcode is exiting with status 0
End of admvcode session
Date/time is Sun Jun 06 2010 23:58:49
Done copying driver files into installation area.
STOP_TASK: [Copy driver files] [] [Sun Jun 06 2010 23:58:50]
STRT_TASK: [Forcecopy driver files] [] [Sun Jun 06 2010 23:58:50]
ForceCopying driver files into installation area...
No driver files were selected for ForceCopying.
STOP_TASK: [Forcecopy driver files] [] [Sun Jun 06 2010 23:58:50]
STRT_TASK: [Screen out files not valid for this configuration] [] [Sun Jun 06 2010 23:58:50]
Screening out files not valid for this installation...
STOP_TASK: [Screen out files not valid for this configuration] [] [Sun Jun 06 2010 23:58:50]
STRT_TASK: [Read file driver files to get list of valid files] [] [Sun Jun 06 2010 23:58:50]
Determining valid on-site files...
Setting JAVA_TOP to '/oracle/PROD/apps/apps_st/comn/java/classes'
STOP_TASK: [Read file driver files to get list of valid files] [] [Sun Jun 06 2010 23:59:09]
STRT_TASK: [Perform libout actions] [] [Sun Jun 06 2010 23:59:09]
Extracting object modules from product libraries...
Done extracting object modules from product libraries.
STOP_TASK: [Perform libout actions] [] [Mon Jun 07 2010 00:00:10]
STRT_TASK: [Perform version checking] [] [Mon Jun 07 2010 00:00:10]
Performing version checking...
Log and Info File sync point:
Mon Jun 07 2010 00:00:12
AutoPatch found some files which it will not apply.
These files are listed in the AutoPatch informational message file.
No version in patch file:
/oracle/Upgrade_box/patches_12.1.2/7303033/7303033/msc/bin/setup_SNO.exe
Error occurred in version checking.
See above error messages or AutoPatch log file for details.
Exiting AutoPatch...
Freeing includes hash table
Freeing fixes hash table
Freeing basedons hash table
Freeing entities hash table
You should check the file
/oracle/PROD/apps/apps_st/appl/admin/upg/log/7303033.log
for errors.Hi,
AutoPatch warning:
Product Data File
/oracle/PROD/apps/apps_st/appl/admin/zsaprod.txt
does not exist for product "zsa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/oracle/PROD/apps/apps_st/appl/admin/jtsprod.txt
does not exist for product "jts".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
Those warning messages can be ignored -- See (Note: 421136.1 - Product Data File Error Applying Patch 4440000) for details.
For the other error, I believe the document provided by Helios should be helpful.
Thanks,
Hussein -
Dear all,
i have a little problem.
I am setting up a webserver that wil be using Apache and Apache-SSL/OpenSSL.
The machine is a Ultra-10 running solaris-9. When i am running the apache-ssl patch i get the following error: " your version of patch is out-of-date. You need patch 2.1 or 2.5. N.B. We mean the program called 'patch' needs an update, not that ypu have the wrong patch!!!"
Ok i understeand this part, I have the correct apache-ssl patchbut the program patch is out-of-date and i have to upgrade to version 2.1 or 2.5
No problem, i connect to http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/patch-access and i download the 9(28.6m) version and i am installing this one.
Now it is wrong. He is unable to install the following:
113319-01
112998-02
112875-01
112970-02
113146-01
What is wrong? And what do i need to update patch to version 2.1 or version 2.5?
Regards,
Johan.The main contents of this v.2.1.0.12 version are still exactly the same as in the previous (major) v. 2.1.0.11 SW version, which is also why I have not posted it here separately. http://discussions.nokia.com/t5/Software-Updates/New-software-update-for-Nokia-X2-Dual-SIM-Nokia-X-S...
http://www.microsoft.com/en/mobile/nokia-x-updates/
http://www.microsoft.com/en/mobile/nokia-x2-update/
http://www.microsoft.com/en/mobile/asha-software-update/
http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
https://twitter.com/LumiaSWUpdates -
AcrobatUpd11009.msp patch cannot be installed
Hello all,
Another month, another Adobe patching headache! So I have read the Enterprise Administration guide many times, and I have been deploying and patching Adobe Flash,Reader and Acrobat for years now. Usually it goes smoothly, but eventually I always run into an issue. This time my problem is this:
Last month, I created a new Acrobat XI AIP from the bas 11.0 media. I patched this AIP to 11.0.07 (quarterly)
I then installed Acrobat on many clients using the command line option 'PATCH=AcrobatSecUpd11008.msp' to "chain" the OOC patch into my install, without actually applying the OOC to my AIP.
Today, when I try to apply the AcrobatUpd11009.msp to these same clients, I am getting the error in the log file: "PATCH SEQUENCER: minor upgrade patch \\server\share\AcrobatUpd11009.msp is not applicable."And error in GUI: "The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade".
Can someone out there tell me what I did wrong here? I believe I can uninstall 11.0.08 then run a full install of 11.0.09 from a new AIP, but that seems unnecessary.
Thanks in advance!Still no answer on this? We have the same problem on all our computers. Seem that after installing 11.08 update, something isn't updated because the 11.09 patch thinks it is still 11.07. (yes, going to help/about shows version 11.08)
Here's what the patch spits out with the /lv switch:
=== Verbose logging started: 10/8/2014 15:52:15 Build type: SHIP UNICODE 5.00.7601.00 Calling process: C:\windows\System32\msiexec.exe ===
MSI (c) (C8:D0) [15:52:15:285]: Font created. Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
MSI (c) (C8:D0) [15:52:15:285]: Font created. Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
MSI (c) (C8:94) [15:52:15:285]: Resetting cached policy values
MSI (c) (C8:94) [15:52:15:285]: Machine policy value 'Debug' is 0
MSI (c) (C8:94) [15:52:15:285]: ******* RunEngine:
******* Product: {AC76BA86-1033-FFFF-BA7E-000000000006}
******* Action:
******* CommandLine: **********
MSI (c) (C8:94) [15:52:15:285]: Machine policy value 'DisableUserInstalls' is 0
MSI (c) (C8:94) [15:52:15:301]: Cloaking enabled.
MSI (c) (C8:94) [15:52:15:301]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (C8:94) [15:52:15:301]: End dialog not enabled
MSI (c) (C8:94) [15:52:15:301]: Original package ==> C:\windows\Installer\88c84096.msi
MSI (c) (C8:94) [15:52:15:301]: Package we're running from ==> C:\windows\Installer\88c84096.msi
MSI (c) (C8:94) [15:52:15:316]: APPCOMPAT: Uninstall Flags override found.
MSI (c) (C8:94) [15:52:15:316]: APPCOMPAT: Uninstall VersionNT override found.
MSI (c) (C8:94) [15:52:15:316]: APPCOMPAT: Uninstall ServicePackLevel override found.
MSI (c) (C8:94) [15:52:15:316]: APPCOMPAT: looking for appcompat database entry with ProductCode '{AC76BA86-1033-FFFF-BA7E-000000000006}'.
MSI (c) (C8:94) [15:52:15:316]: APPCOMPAT: no matching ProductCode found in database.
MSI (c) (C8:94) [15:52:15:332]: MSCOREE not loaded loading copy from system32
MSI (c) (C8:94) [15:52:15:332]: Opening existing patch 'C:\windows\Installer\4fefa807.msp'.
MSI (c) (C8:94) [15:52:15:332]: Original patch ==> C:\Users\x.xxxxxxxxx\Desktop\AcrobatUpd11009.msp
MSI (c) (C8:94) [15:52:15:332]: Patch we're running from ==> C:\Users\x.xxxxxxxxx\Desktop\AcrobatUpd11009.msp
MSI (c) (C8:94) [15:52:15:332]: SOFTWARE RESTRICTION POLICY: Verifying patch --> 'C:\Users\x.xxxxxxxxx\Desktop\AcrobatUpd11009.msp' against software restriction policy
MSI (c) (C8:94) [15:52:15:332]: SOFTWARE RESTRICTION POLICY: C:\Users\x.xxxxxxxxx\Desktop\AcrobatUpd11009.msp has a digital signature
MSI (c) (C8:94) [15:52:16:143]: SOFTWARE RESTRICTION POLICY: C:\Users\x.xxxxxxxxx\Desktop\AcrobatUpd11009.msp is permitted to run at the 'unrestricted' authorization level.
MSI (c) (C8:94) [15:52:16:143]: SequencePatches starts. Product code: {AC76BA86-1033-FFFF-BA7E-000000000006}, Product version: 11.0.07, Upgrade code: {AC76BA86-0000-0000-BA7E-7E8A45000000}, Product language 1033
MSI (c) (C8:94) [15:52:16:143]: PATCH SEQUENCER: verifying the applicability of minor upgrade patch {AC76BA86-A440-FFFF-A440-7A8C40011008} against product code: {AC76BA86-1033-FFFF-BA7E-000000000006}, product version: 11.0.07, product language 1033 and upgrade code: {AC76BA86-0000-0000-BA7E-7E8A45000000}
MSI (c) (C8:94) [15:52:16:143]: Note: 1: 2262 2: _Tables 3: -2147287038
MSI (c) (C8:94) [15:52:16:143]: Note: 1: 2262 2: _Columns 3: -2147287038
MSI (c) (C8:94) [15:52:16:143]: PATCH SEQUENCER: minor upgrade patch {AC76BA86-A440-FFFF-A440-7A8C40011008} is applicable.
MSI (c) (C8:94) [15:52:16:143]: PATCH SEQUENCER: verifying the applicability of minor upgrade patch C:\Users\x.xxxxxxxxx\Desktop\AcrobatUpd11009.msp against product code: {AC76BA86-1033-FFFF-BA7E-000000000006}, product version: 11.0.07, product language 1033 and upgrade code: {AC76BA86-0000-0000-BA7E-7E8A45000000}
MSI (c) (C8:94) [15:52:16:143]: PATCH SEQUENCER: minor upgrade patch C:\Users\x.xxxxxxxxx\Desktop\AcrobatUpd11009.msp is not applicable.
MSI (c) (C8:94) [15:52:16:143]: SequencePatches returns success.
MSI (c) (C8:94) [15:52:16:143]: Final Patch Application Order:
MSI (c) (C8:94) [15:52:16:143]: {AC76BA86-A440-FFFF-A440-7A8C40011008} -
MSI (c) (C8:94) [15:52:16:143]: Other Patches:
MSI (c) (C8:94) [15:52:16:143]: Unknown\Absent: {AC76BA86-A440-FFFF-A440-7A8C40011009} - C:\Users\x.xxxxxxxxx\Desktop\AcrobatUpd11009.msp
The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade.
C:\windows\Installer\88c84096.msi
MSI (c) (C8:94) [15:52:16:143]: Product: Adobe Acrobat XI Standard - Update '{AC76BA86-A440-FFFF-A440-7A8C40011009}' could not be installed. Error code 1642. Additional information is available in the log file C:\Users\x.xxxxxxxxx\Desktop\v.
MSI (c) (C8:94) [15:52:16:143]: Windows Installer installed an update. Product Name: Adobe Acrobat XI Standard. Product Version: 11.0.07. Product Language: 1033. Manufacturer: Adobe Systems. Update Name: {AC76BA86-A440-FFFF-A440-7A8C40011009}. Installation success or error status: 1642.
MSI (c) (C8:94) [15:52:16:143]: Note: 1: 1708
MSI (c) (C8:94) [15:52:16:143]: Product: Adobe Acrobat XI Standard -- Installation failed.
MSI (c) (C8:94) [15:52:16:159]: Windows Installer installed the product. Product Name: Adobe Acrobat XI Standard. Product Version: 11.0.07. Product Language: 1033. Manufacturer: Adobe Systems. Installation success or error status: 1642.
MSI (c) (C8:94) [15:52:16:159]: MainEngineThread is returning 1642
=== Verbose logging stopped: 10/8/2014 15:52:16 === -
While trying to update our compiler to the newest patch set, I ran into the following problem. From access1, patch 111683-14 requires patch 111690-10 or greater to be installed. 111690-10 is not listed on access1 as a patch. When I tried to install 111690-10 after getting it from sunsolve, the patch installation failed, saying that "One or more patch packages included in 111690-10 are not installed on this system."
111690-10 appears to be an update to the Fortran subcomponent of Forte 6U2, (I guess contained in the Hi-perf package), which we did not install, because we don't use fortran. But this is sort of a problem, because it means that we can't install the latest debugger patch.
Any suggestions?You can find 111690-10 from access1 at:
http://access1.sun.com/patch.public/cgi-bin/show_list.cgi/wrk/Forte_Fortran_6u2_SPARC
With the next dbx patch release, the dependency problem will be removed. Please wait until the next dbx patch comes out.
- Rose
Maybe you are looking for
-
I would like to use the drive as storage/aperture backup rather than use it to back up my whole Macbook. Would like to keep the majority of the photo files on the ext. drive and be able to add files there directly. BUT, when workng in aperture woul
-
What is the best way to upgrade iTunes?
I'm currently running iTunes 8.0.2.20 to work with my iPod Touch 2G and Nano 4G. All is working quite well so I'm rather hesitant about upgrading. But more and more content is requiring an upgrade to the latest iTunes version. If I decide to take the
-
I'm just starting ichat. Got signed up, can log in etc, picture and sound work fine. At this stage only have 1 buddy. He can invite me to video chat - it rings, I accept everything works fine. But, when I log in, my buddy list is grayed out, and I ca
-
I have crawled the UCM through SES, but when I try to search on the Search screen nothing is searched. followed the following document - http://www.oracle.com/technetwork/search/oses/stellent-white-paper-178229.pdf But at the end I need to configure
-
In java ,how to access the user-defined type of pl/sql?
in my application,i using the following code to access the pl/sql type self-defined,but it throws run-time exception,how can i resolve it?String sqlStr="{call BossStat.dunStat(?,?,?,?,?,?)}"; OracleCallableStatement ocstmt=(OracleCallableStatement)co