2.0.1 And the Endless Restore Cycle

Hey...
So update my iphone this morning, it errored after 10mins or so (probably my machine's fault) and the iphone went into restore mode. Did a full firmware restore, then restored my data from a backup.
Restarted iphone, everything back to normal! woop! Plugged it into itunes...
Would you like to restore this iphone? Uh... didn't i already do that? well I suppose one more restore can't harm anything. Full restore, iphone back to normal. Plugged it in... Would you like to restore this phone?
ARGH!! It doesn't realise that I've already restored the iphone, and won't let me sync with itunes. If i sync it as a new iphone I'll lose all my contacts/calendar etc!!
Anybody know a way round?
Thanks

If nothing else works, you can go into settings/reset and to a erase and restore settings. This will set it up to factory conditions with no data. You will have to reactivate it via iTunes and when it gets to the restore screen, select set up as new phone. The erase procedure takes about 1 hour.
Glor

Similar Messages

Ipod Shuffle in endless Restore Cycle

History:
-I bought a 2nd generation Ipod shuffle a week ago and hooked it to my Windows-based system
-Was prompted to, and downloaded latest version of Itunes
-Started loading music onto Shuffle
-After 100 songs or so, got an "Ipod Corrupted" message and downloads stopped
-When I connect Ipod and get the device recognized, I am prompted to Restore Ipod to original factory settings and download latest version of Shuffle software
-When I hit button to proceed, Itunes goes into an endless Restore cycle which doesn't actually restore the Ipod (the longest I have left it on is 12 hours and no dice)
-The Ipod is functional when disconnected and has the songs I loaded but I want it restored to full functionality
Any advice? Anyone have the same problem? This tiny device is taking up far far too much of my time.
Thanks.

I had the same problem. My iPod shuffle would just continuously blink orange and would not sync up to my iTunes library. Talked with Apple support and here's what worked for me...
Under My Computer right click on your iPod name.
Hit format (I'm pretty sure you'll lose all your music and will have to wait for it to re-sync.)
After that it just started working.
Worth a shot if you've tried everything else.
Windows XP

IPAD 2 is wiped and in endless restore loop with 5.1

I downloaded and installed iOS5.1 about 7 hours ago after being prompted on both my iPad2 and iPhone4S via WIFI. No problem with the iPhone,works great. However, when the iPad rebooted it told me I needed to restore the device, which I attempted to do so over a dozen times on two differnet PC's (office and home) and each time I get an error "The iPad "iPad" could not be restored. An unknown error occurred (1)." I have checked many forunm and sites for help. I tried everything that Apple and other posts suggested but no luck at all in the endless restore loop.
I am really shocked that Apple would release this IOS 5.1 disaster out with any real help or guidance. The worse part is the erasure of all data on the device, including the device name. The ITunes window can't even identify the capacity or serial number. What a cluster.

In case anyone was wondering how this was resolved, I had to ring Apple Support. Secondly, this problem was compounded by the fact that I only backed up to the Cloud, not my PC. Stupidly, on my iPad after it lost all it's data, I clicked on 'sync to the Cloud', which overwrote my good backup.
I had to set my iPad in iTunes up as a new iPad, and move everything back over. From now on I am only going to sync to the PC.

Connecting Web and the entire OTC cycle (Part 2)

I am a .Net programmer and at the same time SAP SD Consultant but just new to this SAP field. I will be creating a website where the customer orders will be recorded. Based on my research in this forum, connecting a website and SAP will be possible (as advised by the people here - [source|Connecting Web and the entire OTC cycle;).
Here is my question. If I will create a website that will take control of the entire Order-To-Cash cycle, will I have problem connecting my website to SAP (back and forth), or it will be the problem of the ABAP person?
I do not have the slightest idea on how to connect to SAP if the front-end is a browser/website. I only know how to program using Microsoft ASP.Net
Please help. Thanks.

Hi,
The problem really depends on where the connection is failing..
pls check the following and I hope that really helps:
[http://help.sap.com/saphelp_NW04/helpdata/en/51/d5470940fd564b888f4beb9523fa6c/content.htm]
[https://media.sdn.sap.com/html/submitted_docs/dotnet/Programming%20with%20PDK%20for%20.NET/Connecting%20to%20SAP%20NetWeaver%20Systems/Using%20SAP%20.NET%20Connector.htm]
Regards
Raghu.

I can not create a new ID in my iphon 4s, well I've created several to solve the problem of FaceTime, and the last restoration would not let me create a new ID. I can do? Thanks for helping.

I can not create a new ID in my iphon 4s, well I've created several to solve the problem of FaceTime, and the last restoration would not let me create a new ID.
I can do?
Thanks for helping.

Thanks Ckuan
I can do, to create new ID?
No way to delete all information from Iphon to create another ID?
I will appreciate your answer

The MS15-10 Security Update for Windows Server 2012/R2 Essentials and the Client Restore Functionality

The MS15-10 Security Update for Windows Server 2012/R2 Essentials and the Client Restore Functionality - The Windows Server Essentials and Small Business Server Blog - Site Home - TechNet Blogs:
http://blogs.technet.com/b/sbs/archive/2015/03/13/the-ms15-10-security-update-for-windows-server-2012-r2-essentials-and-the-client-restore-functionality.aspx
FYI

Hi Susan. I hope there's a better 'fix' coming to replace this "uninstall the updates, restore, then reinstall the updates after the restore". This kind of workaround requires that all of us remember that there's a problem
with KB3023562 and KB3004375 from now until the end of WS2012E. Not sure I'll remember this 6 months from now when the problem crops up during a restore. -:(
Merv Porter
=========================

Connecting Web and the entire OTC cycle

Is it possible to connect all of the SAP OTC (order-to-cash) transactions to a website? I mean you will transact via website and that website will pass the data to SAP and SAP will pass back the data needed by the website in real-time? The company plans to use a tablet as front-end and we have a software (a sales automation software) that we want to pass data to SAP and vice versa. Our company is about to acquire SAP ECC 6.0 without CRM.
1. Is this possible using IDOC?
2. Can the website and SAP pass data (back-and-forth) to each other in real-time?
3. Can it complete the entire OTC transactions (SO, DO, DR, billing)?
4. Any suggestion?
Please help. Thank you.

Hi,
Yes this is very much possible and probably a very common scenario..
These are the following possibilities:
1) The web based application should be able to call and be built to accept calls from APIs..which are called BAPIs.
We had a MTO based industry and we used BAPIs to enable functionality on the web..also check the part on synchronous calls.
2) I've worked in a business , where orders used to be taken on PDAs/hand-held devices.. all these devices are connected to a common database and SAP interfaces all the master data and transaction data to this database and the DB connects kind of real time to the PDAs / hand held devices. However, you've to check about what all transaction data are you expecting and if IDocs are available for all of transactions you're looking for..
I hope this helps.
Regards,
Raghu.

Windows Vista 64-bit and the Backup & Restore....

I've recently found out that Backup & Restore is not supported by Vista 64-bit. So, all the backups that did not complete and has the error message (0x8007002), all the backups are of no use. All of my documents, pictures, music, original
music materials, etc., are all gone. Can't even open the error-ed backups! Can my system be restore to it's original settings before the backup fiasco? I am at a lost to what can be done!
Sincerely (feeling hopeless)
Rapport1951

Please post in the appropriate Vista forum found @
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=windowsvistaitpro
This is a Windows 7 forum.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

I just bought a new macbook pro 13-inch. I ran coconut battery test and it says age of the macbook is 22 weeks. And the battery load cycles shows 4 and battery capacity is 96%. Is this all normal? Does anyone have same issues?

I just bought a new macbook pro 13-inch 6 days ago. I ran coconut battery test and it says age of the macbook is 22 weeks. It shows 4 battery load cycles and battery capacity is 96%. Is this all normal? Does anyone have same issues?

"Is this all normal?"
Yes.
"Does anyone have same issues?"
What issues?
Coconut indicates an approximate battery capacity, and 96% is excellent. During testing and run-in, the MBP is charged and discharged, and a cycle count of 4 is appropriate.

Importing photos and the endless beachball

I am having problems with iPhoto hanging (or stalling or whatever) when I'm importing photos. This happened before when I had minimal RAM and very little space on my start-up drive. I chalked up the problem to lack of memory and HD space. I beefed up the RAM to 1.25GB and did some housekeeping on the start-up drive. After that the probems seemed to dissapear. Now recenly it has started again. I still have the 1.25GB RAM, but I have a new 160GB start-up drive with around 100GB free. The photos are not being imported to the start-up drive, but instead to a freshly built 3 drive RAID 5. This has got me stumped.

Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Keywording and the endless spinning ball of death

Hi- I'm using 1.0 on a g4 ibook.
I enter keywords, hit either tab or return when finished, and lightroom hangs up. For a long time.
Lightroom is otherwise fast and smooth on my computer.
Any help would be appreciated.
Don

When I had my iBook 800 w/ 640Mb Ram I had no problem keywording and I tend to runn a number of apps together.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core, Pentax *ist D
http://donricklin.blogspot.com/

Taxes, Fees, and the bottom line?

So, I'm looking at the More Everything Plan with 4GB's which shows the monthly bill for 120.00 for one line. I'm also looking at the 3GB one for 110.00 a month. I know there are extra charges, taxes, and activation fees. Does anyone have one of these two plans and wouldn't mind telling me the bottom line?
(I'm looking at the Samsung Galaxy s5 if that helps.)

I don't know. The billing cycle date is chosen at random. The first is always higher as you are paying for a partial billing and the full month cycle plus the activation/upgrade fee, taxes and regulatory fees.

HT1430 Trouble getting email on my ipad. I have deleted and re-added the original email address in Settings. Then restarted the ipad. Still continue to get the endless cycling when I try to get on my yahoo email account. Does anyone have a fix for this

Trouble getting my email on my ipad. I have tried deleting the account and red-adding it. Then shutting down the ipad and starting it up again. Any help on what else I can do to get it to work once again??

Killerfinch wrote:
My new yahoo account nestles comfortably in iCloud on the mine iPad.
No, your Yahoo account is not in iCloud (which only handles iCloud mail), it is in Yahoo, and the Yahoo mail account is on your iPad.
But the MacBook Pro will have none of it! I write this question now as I fear that I will be totally demented very soon and unable to formulate my thoughts clearly!
Get the correct settings for your account from Yahoo and set it up manually.
By the way, I also find the "password" issue problematical. It seems Apple want my Apple password rather than my eMail password. All very confusing.
That would depend on what you are trying to do.

I am trying to restore my catalog having previously done a back up to an external hard drive and subsequently an incremental backup. I am using Photoshop Elements 11 and the only option given in the restore procedure is to open a .tly file.

I have done this but now the restore function is asking for yet another file, which i assume to be the original back up, but that is the only .tly file since the only other relevant file appears to be called catalog.buc but that is just not visible when using the restore function? How do I continue from here with this restoration of my catalog?

Martin_Had a écrit:
Thank you Andaleeb. I appear to have an old backup of a year ago, and a more recent full back up plus an incremental backup.
Regrettably I don't really understand what is going on because firstly the restore does not complete its cycle so I cannot see what that backup file contains and secondly all I have read would suggest that the .tly file is the full backup and the catalog.buc file is the incremental backup. For the present, the catalog shows the photos for 2014 which makes me think I might have backed from the old back up file.
I am minded to create another catalog and try again.
Any views on what I can do?
A backup (full or incremental) is a folder, not a file. It contains renamed pictures file copies as well a copies of the files and subfolders of the original catalog. The catalog.buc is a renamed copy of the database of your original catalog while the backup.tly. That backup.tly file contains the information to restore the renamed pictures where you decide, the original location or a new custom one. You can't do anything with the backup yourself, only the restore process can do the job if it finds the backup.tly file. In the case of an incremental backup, you have to tell the restore process where to find the incremental backup folder; it finds the backup.tly file in that folder and finds what is to restore there; then it asks you for the previous backup folder (in your case the full backup); you then browse to that full backup folder so that the restore process can find find the backup.tly there; the restore then deals with the rest of the files to restore.

When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats. Any suggestions on how I can troubleshoot this problem?

Hi all,
I need help with my iphone4s.
When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats. Any suggestions on how I can troubleshoot this problem?
What seems to be the problem here?
thanks and regards
Wan

Wanlucg wrote:
When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats.
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

2.0.1 And the Endless Restore Cycle

Similar Messages

Maybe you are looking for