2.0.1 update does not resolve problems with contacts

I was glad to see there was an update for the iphone 2.0 firmware.
I was pretty tired to wait for 10 sec for my accounts to open.
Unfortenately, problems remain after update, and opening and searching for contacts is embarresing slow

I found out, that if you reboot the phone and don't use any third party applications it stays fast. It only get's slow if you use installed applications, of course that's not what I bought the iPhone for, but I still have hope for the next update. But they shouldn't have to let us wait tooo long...
The source of the problem might be, that while hitting the home button the application is only freezed and so still in memory. After collecting some programs the OS has to swap to make room for the new one.

Similar Messages

Windows Phone 8X Update Does Not Resolve Problems

Microsoft has published the fixes that are included in the latest update here:
http://www.windowsphone.com/en-US/how-to/wp8/basics/windows-phone-8-update-history
None of these updates are present on my device, even though I do see the version number in my phone's "About" screen that should include these fixes. When will these be available for my phone?

Sometimes it helps to check out the other discussions in this community. https://community.verizonwireless.com/thread/794324

I-phone device not recognised in i-tunes, but is on windows. All Apple support advice does not resolve problem

My i-phone 3GS with latest operating system is not recognised in i-tunes, howver windows XP does see the device. I have tried all Apple support reccomendations to no avail. There was an error message when last syncing the device with i-tunes, I have uninstalled / re-installed etc and the device is recognised on other PC's i-tunes?

I have the same problem too. My phone wont show on my pc that's why I can't move my photos. But it does show on itunes.
Then I went to device manager and this is what I found. I dont know what to do though.

Word document does not open - problem with template

I have a share point folder synced to my computer. I have repeatedly trouble opening word documents that have been created based on a specific word template (.dotx). In those cases, when I open the document in my local synced folder Word opens and
the bottom border of Word indicates that it is "Opening" the template file. This process never seems to complete and Word must be closed through Ctrl-Alt-Del. Suggestions would be appreciated.

Hi AlexBXL，
DOTX files use the newer Open XML-based Word document format, which was introduced in Microsoft Office 2007. They can opened in Microsoft Word 2007 or previous versions of Word with Open XML component support.
You can open the DOTX files with Microsoft Word 2007 or previous versions of Word. Or you can convert the documents to the Word 2013 mode.
Here is an article about using Word 2013 to open documents created in earlier versions of Word, you can use as a reference:
https://support.office.com/en-sg/article/Use-Word-2013-to-open-documents-created-in-earlier-versions-of-Word-609bbdba-96f2-407b-baaf-d8e53d60d34f?ui=en-US&rs=en-SG&ad=SG
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

I Ipod class wont play TED and other video podcasts. The genious bar could not figure out the problem. This problem is not isolated to a single computer. Secondly, the convert to ipod version feature in Itunes does not resolve the problem.

My Ipod classic wont play TED, The Grid, Techzilla and other video podcasts (but not all video podcasts). The genious bar could not figure out the problem. Instead, the Apple store gave me credit towards a new classic, which produced the same problem. This problem is not isolated to a single computer. Secondly, the convert to ipod version feature in Itunes does not resolve the problem. Lastly, I tried restoring the ipod to no avail. I've heard this is a video codec problem.

See this extensive older thread on the issue.
https://discussions.apple.com/thread/2813428?start=45&tstart=0
B-rock

HT204017 Yosemite update does not solve wifi problems

yosemite update does not solve wifi. Apple are as garbage as Microsoft now, but they have the cheek to charge twice as much!,
Apple, you have lost my future business...might as well buy a cheap windows laptop now.

Hello Chutley,
Thank you for using Apple Support Communities.
Depending on what is happing with your Wi-FI connection, the update may or may not resolve your issues. Since updating didn't resolve your issues, you might want to take a look at the following article for additional steps to try:
Wi-Fi: How to troubleshoot Wi-Fi connectivity - Apple Support
Regards,
Jeff D.

Installing ios8.2 does not resolve Google map navigation problem or gps tracking!

Installing ios 8.2 does not resolve Google map navigation problem.

I have tried to install both of them lots of times but in each case I receive the same in my XE.bat file:
Instance created.
DIM-00019: create service error
O/S-Error: (OS 1387) Unable to add or remove a member from the local group because this member does not exist.
Have checked OS 1387 error at Microsoft Support and as possible cause of the problem they give as follows:
This issue can occur if the environment has a disjointed namespace (i.e. the domain has different NetBIOS and DNS names). For example, assume that the domain has a NetBIOS name of "domain.com" and a DNS name of "domain-old.com." When users are added in the Windows UI, they are displayed in the format of domain\ComputerName. However, you notice in the error log that there was an attempt to add a computer account in the format of domain-old\ComputerName. (System Center 2012 R2 Data Protection Manager install fails and generates ID: 4323: "A member could not be added")
Tried to find out my DNS name, but it is impossible because I don't have any domain installed and my machine is not connected to it. Some other blog (Install Oracle 11gR2 on Windows) advices to work with adding my computer account to some non-real windows domain (just for the purpose of resolving the network) as well and reinstall the database then. If I undestand it right I need minimum 2 machines for this. But I own just one, where the server is based and thought that is enough to run the database... no idea ..

How can I back up ipad on icloud? Keep getting message "There was a problem completing the back up. Please try again later." I have, many times! The trouble shooting info does not resolve the problem.

How can I back up ipad on icloud? I keep getting the message "There was a problem completing the back up. Please try again later." I have done so MANY times! I've followed the instructions ( I believe!) and the trouble shooting info does not resolve the problem. Can you please help?

I had this exact same problem because the router i had in my house was having interference issues and the speed was too slow to do it.
I would download a speedtest app on your iPad and see how fast your internet is. I think the app is called speedtest in fact.

Windows update does not work after using System recovery disk

I have a Toshiba Satellite c655 with WIndows 7 64 bit Home premium. The hard drive died on it, so I purchased a new hard drive and purchased the appropriate Recovery media from Toshiba. I followed the directions and installed the 3 disks on to the new hard drive. But Windows update does not work I get the following error: Windows update can not currently check for updates, because the service is not running. You may need to restart your PC    No matter what I try, I can not get it to work. And it will not let me install Windows Defender either. Any ideas or help would be appreciated. Thank you in advance for your time on this matter.
Solved!
Go to Solution.

I get errors saying A problem is preventing the troubleshooter from starting.
That makes two similarities to the following thread. Both Windows Update and Troubleshooters fail to work correctly.
   Trouble with reinstall of Win7 64 on a L505-ES5018
The fix was to install a new hard disk driver.
   Intel Rapid Storage Technology
-Jerry

"The updater does not have a firmware image"

My initial problem was that I suddenly could not copy purchased music from iTunes to my iPod. I tried the suggestion of downloading the iPod Updater. The Updater did indicate that my iPod software, 2.2, "needs update". Upon attempting to install the Updater (by clicking 'Update'), I received the following message: "The Updater does not have a firmware image." I notice that SEVERAL people are having the same problem at this very moment on this message board. I hope someone from Apple notices this fiasco and does something to fix it. Please help. Restoring my iPod is not an option for me. Thanks.

Yes, I've had this problem too. And the iPod has not been updated with any of the tracks I bought since updating to iTunes 5, but iTunes REloaded all the older tracks onto my iPod. Why? Seeing as the upgrade to iTunes 5 was a bit traumatic in itself, I'm not altogether surprised to discover the newer tracks had not been copied: there is obviously some incompatability here somewhere - but goodness knows where.

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing.

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing...
Can I uninstall existing iTunes without losing my media library? and then install fresh to fix this problem?

Hi there kweitkamp,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
-Griff W.

"The hostname does not resolve to any configured address..."

I think this is a stupid question But I just can't remember what I'm missing. It's been a while since I set one of these up.
I have just installed Lion and Server on a Mac Mini 2.66GHz C2D
I'm not trying to change the Open Directory settins from Standalone directory to an Open Directory Master.
When I do it saks me to create a directory adminstrator account. No problem. But when I hit continue on that screen I get a message saying:
"The hostname does not resolve to any configured address. Please ensure your hostname and network configuration is correct."
Now, I think this is because I haven't set up any DNS zones yet. But I'm not sure about that...
So can anyone(s) help me with these two things:
1. Is the Open Directory master I'm trying to set up dependent on setting up DNS first?
2. If so, can someone tell me what I'm supposed to do in the DNS, because for the life of me I can't remember anything about it.
I'll be very grateful for any help...
Thanks!
David.

Hi again. Thanks for the help. So that clears up that mystery. However...
Ok, so as already noted, I've completely forgotten how I set this up last time, but I remember that I still have an archive of my old Snow Leopard server before I upgraded it to Lion.
So I've fired that up in Server Admin to see how I set up the DNS in that, and see if that can remind me how to set up the same on my new Lion server.
I believe I've set it all up correctly, but alas, I'm still getting the same error message when I try to create the open directory master. So I must be doing something wrong still. I just wish I knew what that was.
I've attached screen shots of my settings. If you or anyone else can tell me what I'm doing wrong, then again, I'd be grateful!
The routing is done by my Airport Extreme, with the .200 IP address being assigned by DHCP client ID. The IP address of this machine is in fact 10.0.1.200. These settings are exactly the same (with one exception) as my (working) Snow Leopard server and just to be clear I'm not trying to run both servers at once!
The one exception is this: The first line in the screen shot says "1.0.10.in-..." (from the non-working Lion server), whereas on my Snow Leopard server, the same line says "200.1.0.10.in-..." Everything else is the same. I can't seem to see any way of "correcting" that. Is that the cause of the problem? And if so, how do I fix it? If not, what *is* the problem?
Thanks!
David.

TS3899 I just installed the latest software update on my iPhone this weekend (9/22/12), and now I can't get email. I've restarted and closed all my apps to no avail. I'm able to get email on my laptop, so it's not a problem with my provider. Any ideas?

I just installed the latest software update on my iPhone this weekend (9/22/12), and now I can't get email. I've restarted and closed all my apps to no avail. I'm able to get email on my laptop, so it's not a problem with my provider. Any ideas?

Originally we were getting the error that the phone could not connect. Then, after deleting the account multiple times and re-adding it again, the error message CHANGED to having to log in to Yahoo and authorize.
When we went to Yahoo in a regular browser and logged in there was an alert telling us about connection attempts so it disabled mobile/iphone connectivity. It required that we change our password FIRST.
Then, we went in to Manage Apps and Webpages and saw that iPhone was not there but Facebook was.
After all of this went back to the phone and deleted then re-added the account again and SUCCESS!
It now also shows up on the Yahoo Manage Apps and Webpages.
Hope this helps someone else. Please consider giving me points if it does or like the post.
Fred

AdbeRdrUpd1001_Tier1.msp Update Does Not Install using Nullsoft

Hello,
I am attempting to use the Nullsoft Scriptable Install system to install the Adobe® Reader® 10.0.1 update on Windows XP SP3. I determined that the Adobe update will install as expected when I run the msp on a console command line with the following arguments:
C:\temp\> AdbeRdrUpd1001_Tier1.msp /passive /norestart
However, when I put the same exact command into Nullsoft script, the update does not get applied. I have a theory that the Tier1 update needs to determine language information from Windows XP and because the Nullsoft script executes in a Windows environment that is not fully initialized, the language information is not available and the update fails. If you can expand on this or provide any insight please respond to this message. Any help with this question would be greatly appreciated.
Thanks, Jeff

you could start by uninstalling the HP Update program from Add/Remove Programs.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

I changed my browser fill and the update does not show in the preview mode

I changed my browser fill and the update does not show in the preview mode. I saved and restarted muse but the problem is still there. Any thing else I can do? Could it be something that changed in the file?

Hello,
What did you put in the "browser fill" area, an image or a color? WIth gradient or with solid color? Also, does it show fine if you "Preview in Browser"?
Screenshots showing the Browser fill section (like this: http://screencast.com/t/RHqdVPP4) and the display in Preview mode would also be helpful.
Cheers
Parikshit

2.0.1 update does not resolve problems with contacts

Similar Messages

Maybe you are looking for