2.0.2 Maps Malfunction?

I enter a location in the search area, it pinpoints it perfectly. I add it as a bookmark.
I go to the 'Directions' area and choose the book mark, tell it to Give me a route from my current location, it says 'End location not found'.
If I use the 'Directions' area End point to search, it gives me 'End location not found'.
Why would these functions use a different database? Is this a known bug?

See http://discussions.apple.com/thread.jspa?threadID=1596432&tstart=0

Similar Messages

  • Google maps malfunctioning

    My google maps app has been malfunctioning since this weekend. It will load completely initially, but when I search and move the map around, I'll get those gray squares that appear to be downloading new information, which won't disappear. The status bar at the top will have that spinning wheel that won't stop. Even if I leave it like such for several minutes, nothing changes. If I immediately quit and reload the app, then it will load that particular area of the map just fine. Any suggestions?

    This morning the "maps" app and all my other apps that use Google Maps are not working. They only display a gray screen with a grid and the blue location dot. The Mapquest app works (doesn't use Google maps obviously). Spoke to Apple Support and they feel it's a Google issue and the only support they can offer is restarting the iPhone. I restarted phone... same problem. Any help to resolve this issue would be very much appreciated.

  • Numerous apps (Mail, iBooks, Pages, Preview) malfunctioning since upgrading to Mavericks. Tips on how to resolve?

    It took three attempts to download Mavericks because the first two downloads stalled for hours (overnight in one case) and so I aborted them, let the laptop chill out for a day, and then tried it again. The third time seemed to work like a charm. Everything operated beautifully for about a day. Then, for some inexplicable reason multiple apps began to malfunction. iBooks, Preview, Dictionary, the App Store app, the iWorks 13 software I'd just purchased and downloaded, and Maps fail to launch. I'll click on them and they'll bounce for a second in the dock then just shut down. I can pull up Mail and see all the messages in my inboxes, but when I select one to try to read, the email just appears as a gray box and then the entire app shuts down. Four notifications for the app store had popped up, so it's possible there are new updates that would resolve some of my problems, but since that app also closes itself immediately I can't run them. All the non-native Apple apps, like Microsoft Office 2011, work perfectly still.
    This is a 2011 Macbook Pro that has been babied. The only thing unusual about it is that I'd had an insane amount of email, but there is plenty of free space.
    Does anyone have any suggestions for possible resolutions? Should I try to revert to Lion? The only negative to that is the newest iWorks will only work in Mavericks from what I understand. (I might be mistaken)
    I'm not very knowledgeable about computers at all, unfortunately. I did open up Disk Utility and ran a verify and repair disk and permissions. That did not resolve any of the problems. The only issues that popped up were ones relating to a printer I used to use. I'm running Avast! right now. I have no idea whether that could help in the slighest. As I said, I'm not the most tech savvy person. Please, tech clever people, help if you can!

    Back up your documents and everything else important to you, not that there is any reason to believe your hard disk may be failing, but the symptoms you describe may presage an impending disk failure, and you should have backups anyway.
    To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting:
    Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red.
    When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
    Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Go to his website, download and run EtreCheck:
    http://www.etresoft.com/etrecheck
    Etrecheck will be in your Downloads folder. Open it from there. You may see the following dialog box:
    Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
    It will take a moment to run as it collects its data.
    Copy and paste its output in a reply.
    Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
    EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
    When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
    After completing the above please determine if the problems also occur in "Safe Mode":
    Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
    Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
    Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
    To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
    Some users have reported an SMC reset to be beneficial. Be sure to read the procedure carefully and follow all the steps exactly as written, even if they seem inapplicable or trivial.

  • Mapped network drive appears empty for all users on one computer

    We have several network drives mapped via a batch file at log in.  On one particular Windows 7 computer one of these drives maps but appears empty.  Manually mapping to the drive and assigning a different drive letter makes no difference but manually
    mapping by entering the IP address allows viewing and accessing the contents.  
    The malfunctioning network drive is also using Hosted BranchCache.  The following settings are set in local group policy:
    (\Network\BranchCache)
    Turn on BrancheCache - Enabled
    Set BranchCache Hosted Cache Mode - Enabled - <servername>
    Configure BranchCache for network files - Enabled - 0
    The servers involved are running Windows Server 2012.
    I am at a loss here and will appreciate any suggestions. 
    ~JuniorG33k "Why is this thus? What is the reason for this thusness?"

    With Offline Files disabled the contents of the mapped drive are visible and accessible.  Unfortunately, Offline Files must be enabled for BranchCache to work.  
    Looking in the Event Viewer at “Applications and Services Logs\Microsoft\Windows\OfflineFiles\Operational” I can see that the mapped network drive transitioned to slow link during high latency but has never transitioned back. 
    ~JuniorG33k "Why is this thus? What is the reason for this thusness?"

  • I can't see my image map

    I made an image map that I need to edit. For some reason when I take live view off the image disappears, and without being able to see it I can't edit the image map. Is there a way in cs6 to do this? Why can't I see the image??
    http://granthoneymoon.com/faith_boosters.html is the sample site with the image map.

    You can fix your file names in DW from the Files window. When you change the name there to replace spaces with hyphens or underscores, DW will ask if you'd like it to automatically update the links. Hit "yes" it saves a lot of find & replace time.
    Generally speaking it's best to use all lowercase alpha numeric names, avoid any special characters like $%& and use hyphens or underscores instead of spaces for all of your web files/folders.
    Lowercase: Because many servers are case sensitive so AboutMe.html is a separate file from aboutme.html. On your local OS, a link to the uppercase version will give you the lower case page, on the server it will throw a 404 File Not Found error in most cases.
    Special Characters: Many special characters have special meaning in html, css, javascript or other coding languages used online. Throwing one in your file names can cause scripts to malfunction, among other problems.
    Spaces: As Nancy mentioned, it's invalid and can cause broken links in certain browsers. IIRC, FireFox is especially susceptible to spaces causing broken links.

  • Pictures disappear, maps are not displayed

    Some malfunction in displays - showing up in actually 2 errors:
    1. On certain webpages, the picture is shortly displayed but then replaced by the loading symbol, reload will repeat this sequence.
    2. Also, maps are typically not displayed but remain empty right from beginning (no loading symbol).
    I guess it has something to do with settings, add-ons, or plug-ins, but could not get proper function by disabling them. It is not the website itself, since the pictures show up fine with the same Firefox version on another PC.
    Thanks for help.

    I have finally solved the problem. It had to do with the user profile - after reset everything is working fine. Good luck for those who also have this problem!

  • Finder search malfunction

    After a reboot cause by parallels desktop crash, the finder search goes malfunction, I just saw a message shown at bottom "searching",nothing appear after keyward search like "mail".
    I've call apple care call center for help, the staff told me to use cd boot then use disk tool to repare the disk permission, but it's didn't fix my problem, can anyone help.
    my os is 10.4.9
    here is the system crash log
    panic.log:
    說明: 危急（系統當機）記錄
    大小: 1.49 KB
    最後修改日期: 2007/3/30 下午 5:20
    位置: /Library/Logs/panic.log
    最近的內容: Fri Mar 30 17:20:22 2007
    panic(cpu 1 caller 0x001A429B): Unresolved kernel trap (CPU 1, Type 14=page fault), registers:
    CR0: 0x8001003b, CR2: 0xdeadbeef, CR3: 0x00e01000, CR4: 0x000006e0
    EAX: 0xdeadbeef, EBX: 0x00000000, ECX: 0x037783cc, EDX: 0x045bc184
    CR2: 0xdeadbeef, EBP: 0x2510bbd8, ESI: 0x2510bc0c, EDI: 0x0569c4e0
    EFL: 0x00010282, EIP: 0x3d3ce140, CS: 0x00000008, DS: 0x3d250010
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x2510b9b8 : 0x128d08 (0x3cb134 0x2510b9dc 0x131de5 0x0)
    0x2510b9f8 : 0x1a429b (0x3d0e4c 0x1 0xe 0x3d0670)
    0x2510bb08 : 0x19ada4 (0x2510bb20 0x48 0x25100010 0x190010)
    0x2510bbd8 : 0x94f9f0 (0x3d1c13a0 0x2510bc0c 0x108 0x3f7ff081)
    0x2510bd38 : 0x94c8c7 (0x45bc184 0xc0185405 0x2510beb8 0x5914b8c)
    0x2510bd68 : 0x1f05d7 (0xd000000 0xc0185405 0x2510beb8 0x81)
    0x2510bda8 : 0x1e7411 (0x2510bdd0 0x297 0x2510be08 0x42733e8)
    0x2510be08 : 0x1df212 (0x3ffc738 0xc0185405 0x2510beb8 0x81)
    0x2510be58 : 0x331c4c (0x569c4e0 0xc0185405 0x2510beb8 0x42733e8)
    0x2510be88 : 0x34ffa8 (0x569c4e0 0xc0185405 0x2510beb8 0x42733e8)
    0x2510bf58 : 0x379e23 (0x42733e8 0x376c940 0x376c984 0x0)
    0x2510bfc8 : 0x19b17e (0x3771700 0x1 0x19e0b5 0x37794c4) No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0xb011eeb8
    Kernel loadable modules in backtrace (with dependencies):
    com.parallels.kext.vmmain(2.2)@0x94b000
    Kernel version:
    Darwin Kernel Version 8.9.1: Thu Feb 22 20:55:00 PST 2007; root:xnu-792.18.15~1/RELEASE_I386
    MBP   Mac OS X (10.4.9)  

    I just try to use a tool mainmenu to force finder restart after system boot, then the search function in finder became work. But I think it's a temporary solution, will try find the best solution, not just restart finder after system boot.

  • 10.4.3 installed, but now weird malfunctions

    After finally installing 10.4.3 on my dual 2Ghz G5 I'm finding the following weird malfunctions.
    CD's from PC's that play fine on my wife's 10.4.2 loaded mac will not mount
    on my 10.4.3 machine, although they show up under disk warrior
    The Date and Time won't display in the menu bar any more, nor will the
    Diplay preferences, a spinning beach ball appears when you put the mouse where they should appear.
    I have 4 FW800 drives daisy chained together and now have extreme difficulty in making them all mount, keep having to unplug and replug, turn on and off until they finally all mount, a real pain.
    Just wondering if anyone else has seen this kind of thing.
    Thanks,

    Terry,
    You may erase a drive with zero option, it's not required, but can make writes more reliable as it rewrites the bad sector map on the drive.
    Once it's done one time it's not needed generally anymore really for that drive.
    So that should save you some time and effort with all these attempted installs.
    I think either your Tiger install disk is funky or your hard drive is failing.
    Click a pic to feel the awesome 30" • Clone your boot drive, read my how to post here

  • New iPhone 5s 64Gb works fine but glitters in video and sound while gaming and maps

    just got a new one and cannot use it in full
    It works perfect until I start a game or open maps or navigation.
    Then the image and sound rattle as if it's a gpu malfunction.
    Release iOS 7.0.4 and I do not know whether the problem is the result of updated OS or else.
    The second totally the same iPhone works fine with no such problems.
    Should I exchange it or it's some sort of the software problem?
    Erased and restored from scratch 3 times, no change.

    Edit - I've tried rebooting/reinstalling - All of the usual!

  • Phone malfunctioned while all other functions work. This is a iPhone 4S.

    I have a iPhone 4s & has been working well for ~ 10 months. Today I can't make any calls, nor receive any calls. I can't access the contact list. it looks like the phone icon stuck on screen. I noticed the iOS7 is ready for update. is that the reason for this sudden phone malfunction? other functions are not affected. i can text, search, check weather, map, etc. emails look fine too.
    Can this be fixed? is software update the reason? I got home and started download and update via wifi. The download part was ok. after that it says "preparing update". this step is still going, take super long... could anyone offer some tips? many thx.

    You'll need to wait for it to update, unfortunately there's nothing you can really do besides an update or restore. Can also try a hard reset by continueously holding the power and home buttons until the device restarts.

  • Malfunctions!

    I've had my phone for a couple months now and have noticed several malfunctions, some more serious than others. The first was my alarm clock - I use my phone on a daily basis to get up for a work and after a week the option to turn off the alarm wasn't appearing. I tried everything, and the only thing that turned it off short of turning the whole phone off was to open my recent apps and close all. I think this may only be when my phone is plugged in to charge but I haven't tried using the alarm when it's not on charge.
    The second thing was Facebook videos. This has been widely experienced and is very annoying, but I've found that if you persevere and keep opening the video it eventually plays.
    The third thing is overheating - I know most people experience it when using the camera but mine has never reached the point where it shuts down due to heat (however it has randomly shut itself down once or twice for absolutely no reason). It also doesn't tend to overheat on camera, but when I'm using the sat nav services from Google maps. I'm assuming it's because of the heavy processing power required to use gps for such a length of time, but my phone was at one point too hot to touch. I haven't found a solution to this yet.
    The final and most concerning glitch happens randomly and I struggle to get out of it. Its difficult to describe but my screen starts act of its own accord, imagine if I was tapping random places very quickly. It switches between screens uncontrollably and acts as if I've held an app on the home screen and starts rearranging my apps. The only way to stop it is to turn the phone off but when I press the power button, because of the random tapping, the option to shut down disappears very quickly and I have to be really quick to catch it. It's annoying and actually terrifying as it feels like my phone is haunted. The phone isn't particularly hot when it happens, and it's happened both when on charge and when not. I'm starting to think I need to get a replacement model as I feel like this phone is bugged to **bleep**!
    Desperate to find someone with similar problems and/or a solution. It was an expensive phone and it's been nothing but a pain in the neck.

    The screen issue IS dirt and moisture.  I am unable to use the Xperia Z2 during any physical activity that makes me sweat, because even the slightest bit of dirt and moisture on the screen registers as a touch.  I also have a screen protector on mine.
    The overheating issue is a known flaw with the phone since before it went on the market.
    For Facebook, you have to go in at least once a day and clear data to get videos to work.
    Not sure about the alarm clock issue... all I can say on that one is "Welcome to Android"
    Yes, I can sympathize with your frustration.  This phone has been a major disappointment.  I should've waited for the G3

  • Problem with Map Loader 3.0.28.0 and 5800XM

    Hi all, i have a problem with maps upload to my mobile, whenever i start Map Loader i see a message: You have connected at least one phone (Soft) without a Maps drive. Either you are using an old Map version - .. - or have never started your Maps application... I use USB PC-Suite mode, I have had run Maps application on my phone before i try to connect Map Loader, the Maps version installed on the phone is v3.03 10wk01 b05 - so that's obviously not a reason!! Now i can't install new maps anymore - i just can click this error window away and choose some maps, they would be downloaded from the Internet, but  they would not appear on my mobile! With a previous version of the map loader (don't know the version number any more, and previous maps version on the phone, i have no problem)            I also need a link to Maps Updater due the Nokia site malfunction - couldn't find this software anymore.... sorry my poor english :-)
    Nokia users - the biggest beta test community of the world!

    Problem solved! The STUPID software searchs for ALL mass storage devices attached to your computer, so I got error messages all the time until I unplug my USB Hard drive.    
    Thank you Nokia guys, your were great help by solving this problem   .....  
    By the way,  the STUPID software doesn't shows the maps that would be all ready installed on the phone, and you couldn't say that the upload of the maps was really successful  until you waisting your time watching the progress bar to the end.
      I wouldn't be suprise if you can install the same map twice so it takes the twice space....
    regards, and sorry for my poor english
    Nokia users - the biggest beta test community of the world!

  • Remote System and Remote Key Mapping at a glance

    Hi,
    I want to discuss the concept of Remote System and Remote Key Mapping.
    Remote System is a logical system which is defined in MDM Console for a MDM Repository.
    We can define key mapping enabled at each table level.
    The key mapping is used to distinguish records at Data Manager after running the Data Import.
    Now 1 record can have 1 remote system with two different keys but two different records cannot have same remote system with same remote key. So, Remote key is an unique identifier for record for any remote system for each individual records.
    Now whenever we import data from a Remote System, the remote system and remote key are mapped for each individual records. Usually all records have different remote keys.
    Now, when syndicating back the record with default remote key is updated in the remote system that is sent by xml file format.
    If same record is updated two times from a same remote system, the remote key will be different and the record which is latest contains highest remote key.
    Now, I have to look at Data Syndication and Remote key.
    I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back. But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
    Regards
    Kaushik Banerjee

    You are right Kaushik,
    I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back.
    Yes, but if they are duplicate, they needs to be merged.
    But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
    This is after merging. So whichever remote key has tick mark in key mapping option(default) , it will be syndicated back.
    Pls refer to these links for better understanding.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/80eb6ea5-2a2f-2b10-f68e-bf735a45705f
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/7051c376-f939-2b10-7da1-c4f8f9eecc8c%0c
    Hope this helps,
    + An

  • Error while deleting a mapping

    Hi all,
    I am getting the following error while deleting a mapping. My client version is 10.2.0.4.36
    API5072: Internal Error: Null message for exception. Please contact Oracle Support with the stack trace and details on how to reproduce it.
    oracle.wh.util.Assert: API5072: Internal Error: Null message for exception. Please contact Oracle Support with the stack trace and details on how to reproduce it.
         at oracle.wh.util.Assert.owbAssert(Assert.java:51)
         at oracle.wh.ui.jcommon.OutputConfigure.showMsg(OutputConfigure.java:216)
         at oracle.wh.ui.common.CommonUtils.error(CommonUtils.java:370)
         at oracle.wh.ui.common.WhDeletion.doActualDel(WhDeletion.java:512)
         at oracle.wh.ui.common.WhDeletion.deleteObject(WhDeletion.java:203)
         at oracle.wh.ui.common.WhDeletion.deleteObject(WhDeletion.java:283)
         at oracle.wh.ui.jcommon.tree.WhTree.deleteItem(WhTree.java:346)
         at oracle.wh.ui.console.commands.DeleteCmd.performAction(DeleteCmd.java:50)
         at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:189)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:478)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
    Thanks in advance!
    Sebastian

    These type of Internal Errors are all too common in OWB and it's difficult to diagnose the exact problem.
    I'd suggest closing the Design Centre, going back in and trying to delete it again, this will often resolve Internal errors.
    There's also an article on Metalink Doc ID: 460411.1 about errors when deleting mappings but it's specific to an ACLContainer error, so may or may not be of use.
    One of the suggestions is to connect as the Repository Owner rather than a User and try to delete the mapping.
    Cheers
    Si
    Edited by: ScoobySi on Sep 10, 2009 11:44 AM

  • FileName in ABAP XSLT Mapping

    Dear SDN,
    In an integration scenario we are using sender File Adapter and a  ABAP XSLT Mapping.
    Is there any way to get the source FileName from such mapping.  Im trying to use the adapter-specific message attributes, but it doesn't work, and I didn´t find an example, probably I and doing somthing wrong.
    regards,
    GP

    Thank you for your help,
    I just try to access the adapter-specific attibutes using:
    <xsl:stylesheet version="1.0"
      xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
      xmlns:key="java:com.sap.aii.mapping.api.DynamicConfigurationKey">
    <xsl:variable name="filename"  select="key:create('http://sap.com/xi/XI/System/File', 'Directory')" />
    </xsl:stylesheet>
    but the following error raised:
    <SAP:Stack>Error while calling mapping program YXSLT_TEST (type Abap-XSLT, kernel error ID CX_XSLT_RUNTIME_ERROR) Call of unknown function</SAP:Stack>
    have you had this situation?

Maybe you are looking for