2.0.2 Update - Calls dropping more than before

Ever since I got the 2.0.2 update for my my 3G iPhone, I have had more calls get dropped and a worse signal (more static). It seems like my phone keeps switching between 3G and the Edge Network every couple hundred yards when moving or every 5 minutes when stationary. Is anyone else having this problem? Is there a fix out for this?

2.02 is a no go then.
Good thing I click on the link before I went to Next.
But where are the release notes? (you know - like specific fixes)
Does it changes/shortens the timeout sessions on the 3G network?
Will it restrict/change certain e-mail protocols?
Does it still brick jailbreakers?
Must've reduced the radio watts. To satisfy battery complaints. Turn off the dang Bluetooth! The 2.4Ghz has been a greater improvement to my iTouch battery consumption.
Could be a Ping or Echo overflow?(ok i'm just trowing stuff on that one)

Similar Messages

Balance dropped more than purchase amount

My i tunes balance dropped more than the $.69 that the song cost. Is there an inactivity fee?

Hi kamlesh,
You are using EHP 4 or higher package. in this case you can use FPDP_CREATE instead of ME2DP.
You can go through Business function LOG_MMFI_P2P
https://websmp109.sap-ag.de/~form/handler?_APP=00200682500000002672&_EVENT=DISPLAY&_SCENARIO=01100035870000000122&_HIER_…
Down Payment and Down Payment Request - Purchasing (MM-PUR) - SAP Library
I hope this will be help full
Regards
Raheem

TS1702 why can't i update the app more than 50mb from itune but can throught wifi?

I tried to update Apps more than 50mb through itune, but found the Apps which are needed to be update are mark "Downloaded" in iTune store. Of course if the Apps mark "Downloaded" are not able to do anything with it. On the other hand, I can simply use wifi to update the Apps, more than 50mb, throught my iphone instead of iTune. Is there any problem with iTune or something wrong with my phone?

In the App section of your itunes library ( NOT the sync pages) there is a button at the bottom which says Check for updates

How to keep the Recent Call Record more than a week?

How to keep the Recent Call Record more than a week? I found the iPhone only can keep the Recent Call Record for only a week.

I have to disagree with your response with respect. My i phone is limiting me to call going back only 7 days ie today is 29 July and my call log will only go back to 22 July. I have only 40 calls logged for that period. I cannot view up to the 100 you mention. I have included all calls for a single caller as well ie one caller shows 7 so ive counted that as 7 calls. There appears no way to set up to 100 in the settings
Thanks
Graham

My 3gs phone auto resets if I am on a call for more than three minutes

My IPHONE 3GS resets itself (call is cut off apple motif on the phone) if I am on a call for more than three or four minutes.
Never happens with any other function.
Has anyone experienced the same. If so what was the resolution.
Thanks

Hi,
You can create all three layouts of your site in a single Muse file and publish/export/upload as required. Muse generates the code to detect the device being used by the user and redirects to appropriate content automatically.. You only need to promote "yourbusinessname.com" and Muse takes care of handling redirection to "yourbusinessname.com/phone/" or "yourbusinessname.com/tablet/" depending on what device you are using to access the site.
Please check out a few resources around Muse : Designing for Devices.
http://tv.adobe.com/watch/muse-feature-tour/adobe-muse-designing-for-mobile-devices/
http://www.adobepress.com/articles/article.asp?p=2219864
http://helpx.adobe.com/muse/using/creating-website-mobile-devices.html
Cheers,
Vikas

Problem in CRM_ORDER_MAINTAIN for updating qty in more than 1 line item .

Hi abapers,
I am using BAPI CRM_ORDER_MAINTAIN to update quantity. Its updating the quantity properly if there is single line item for a transaction .If more than 1 line item is there then its throwing an exception* "Document is being distributed - changes are not possible"*.
Scenario:
I have a itab which is having 2 line items for a transaction. i run a loop pass the pass the required parameters in CRM_ORDER_MAINTAIN ,do CRM_ORDER_SAVE , BAPI_TRANSACTION_COMMIT for the 1st line item. When i run the 2nd loop, in CRM_ORDER_MAINTAIN it gives an exception saying NO_CHANGE_ALLOWED for the same transactions 2nd line item. leaving the quantity unchanged for both the line items. What may be the problem?
Note: We cannot say how many line items are there for an transaction. so no chance of grouping all items at a time and saving at a time.
Regards,
Navin

Hi Navin,
Why its not possible to use CRM_ORDER_SAVE only once. I think its possible. Call CRM_ORDER_MAINTAIN in loop for all the line item in transaction and after that call CRM_ORDER_SAVE once. Pls follow the below sample code.
loop at it_item.
call CRM_ORDER_MAINTAIN. (Here append data for all the line items and miantin the transaction).
emdloop.
After endloop call CRM_ORDER_SAVE. Also you can add some wait after CRM_ORDER_SAVE, In order to avoid locking issue.
PLs let me know where you are trying to use CRM_ORDER_MAINATIAN ? In any BADI or Z program ?
Regards,
Amol.

One button click call function more than once

I have a function I call from a button (onClick) which
inserts a record in mySQL via a PHP page. For some odd reason it
tends to insert more than 1 record. The extra records tend to be
duplicates of previous records. I do not know of SPRY is calling
the function multiple times, if stuff is cached somewhere and it
calls the cached data and the new data. I perform record INSERTS
and UPDATES on many web pages via PHP which get called thousands of
times but only this SPRY application is doing this. Please see my
code below.
Spry.Utils.loadURL function: (not that I want to use POST but
having an issue and so using GET)
function addcommentget(recordID)
var newcomment = document.form1.tescomment.value
Spry.Utils.loadURL("GET","addTEScomment.php?id="+recordID+"&comment="+newcomment,true,Upda teRecordCallback);
FORM code (where button and textarea are)
<form action="" method="post" name="form1">
Add Comment: </br>
<textarea name="tescomment" cols="40"
rows="2"></textarea></br>
<input name="addcomment" type="button" value="Submit
Comment" onClick="addcomment('{@id}');">
</form>
PHP code:
<?php session_start();
require_once('Connections/ppg_conn.php');
$id = $_GET['id'];
$comment = $_GET['comment'];
$user = $_SESSION['username'];
$sql = mysql_query("INSERT INTO
claimsmanager_tesedits_comments (Ticket_ID, Commenter_email,
Comment)
VALUES('$id', '$user', '$comment')
") or die (mysql_error());
?>
Is there anything you see that might cause this strange
behavior?
Thanks,
Lee

Spry.Utils.loadURL() only fires off a single request when you
call it.
Aside from the fact that your button calls "addcomment" as
opposed to the "addcommentget" function you show ;-), I don't see
any problem. Of course I'm not seeing the big picture, only what
you post. Do your data sets load URLs that actually perform DB
updates? Or are they pure DB query URLS?
I would put a line like this:
Spry.Debug.trace("AddCommentGet() triggered!");
in your addcommentget() function and see if you get a single
trace statement every time you press the button.
--== Kin ==--

Can I call getRequestDispatcher more than once?

All,
Does a servlet allows getRequestDispatcher to be called than once?
This is what I'm trying to do. While the server is processing data, I want to forward the user to a temporary page to display "Processing Data". Once
the server got the result, then I want to forward the user to the separate page to display the data. But before forwarding to the second page, I flushBuffer() and reset() the response object. WHen reset(), I got IllegalStateException. How can I fix this? Here is my code snippet:
1. Forward to first page:
getServletContext().getRequestDispatcher(
"/ProcessingNoticePage.jsp").forward(request, response);
2. Flush out and reset:
if(response.isCommitted())
System.out.print("\nresponse is committed");
response.flushBuffer();
System.out.print("\nResetting response");
response.reset();
System.out.print("\nComplete reset");
3. Forward to second page:
getServletContext().getRequestDispatcher(
pageName).forward(request, response);
I got the IllegalStateException on the reset() in step #2. Thanks.

What do you mean by refresh?
The servlet is actually calling another object. THat objects call other objects to perform server side processing that talks over RMI/IIOP. This process might take more than 30 seconds. So in the mean time, I made the servlet forwarding to a temp page to let the user know that data is being processed. Once all the results are back, I set the result to the request obj. and then forward to another JSP page. This (second) JSP page will display the data.
--kawthar

CollectionEvent UPDATE event dispatched more than necessary

Hello,
I am using Flex 4. The objects that populate my data grid have these two fields: tag and transcribedText. Both of these fields are editable.
When I make a change/changes to the same record, the COLLECTIONEVENT UPDATE event is dispatched more than necessary, creating redundant PropertyChangeEvent objects.
Please refer to the following example. I have screenshots to give more details but am unable to copy/paste or attach them.
1. I first changed the transcribedText from “add services” to “add services TODAY”.
2. I then changed the tag from “OrderGeneral” to “OrderInternet”.
3. I finally clicked outside of the affected line.
The COLLECTIONEVENT UPDATE event is dispatched THREE times.
1. In the first dispatch, there are two PropertyChangeEvent objects, and the second one is a repeat of the first one (transcribedText change) but with oldValue and newValue both set to null.
2. In the second dispatch, there is only one PropertyChangeEvent object, and it correctly captures the tag change.
3. In the third dispatch, there is only one PropertyChangeEvent object, and it is a repeat of the previous tag change but with oldValue and newValue both set to null.
Why is this happening?
Thanks for your help!
Bonnie

COLLECTION_CHANGE events are tied to the data provider itself, not to the data grid though.
One interesting observation is that the REMOVE event is dispatched only one time.
When I was using the itemEditEnd event tied to the data grid, I also witnessed that this event was dispatched two times when only one change was made.
Any other thoughts?
Bonnie

Drop more than one user in database

hi how can i drop more user user at same time for example i have users who got prefix UCM how can i make use i drop all user with this prefix
drop user ucm_tets cascade
where username like %UCM%

There is no such thing but you can use :
select 'drop user '||u.username||' cascade;' from dba_users u
where u.username like '%UCM%'
Ramin Hashimzade

Iphone4 4.3.3 update - calls drop with static

Ever since I updated to the 4.3.3 iphone update on my iphone 4, I keep having calls that have to be dropped when major static appears on the other persons line from my phone. I thought maybe it was them, but it has happened to every person I have called! It started exactly after I completed the 4.3.3 update on May 8, 2011 and keeps happening since.

I have taken a leap of faith and pressed 'restore to factory settings'.. Yes, it has now given me the option to restore from the last back up (fortunately immediately before attemting the iOS update !!). This is now in progress with 27 mins to go !!
The point of this message is to try to give some confidence to others in the same situation - I had not been in this situation before.
Fingers crossed to be able to find out just how much of the earlier (pre-update attempt) I get back.
Promise to let you know.
Rob

Video Call with more than 2 people?

Hi !
I've seen that video calls for groups are currently not working on Skype for Android : We can join a video call between 2 or more people but only with the audio : we can hear everything, but we can't see anything (or being seen by the other people of the group).
But i'd like to know if something is currently being developped to fix this issue for Android users or if nothing is currently done ? (i don't care if i have to pay a few extra $$ in order to have this option).
Thanks a lot in advance for your reply
PS : English is not my mothertongue.
Solved!
Go to Solution.

saad
Attachments:
extreme-planking.jpg ‏2 KB

Update Trigger Assistance - Update Same Row More than Once?

Good morning,
I'm new to Triggers and am not understanding why this is not working. I've tried the web and none of the articles seem to answer my question. What I'm trying to do is clean a string and standardize some data the users input into a 1000 character
varchar field. I have a source table which has a trigger on it that inserts a limited number of columns that we'll use for reporting purposes. After the row has been inserted into the table (referred to as "destination" in the code block),
I'm looking to update the comments string, capitalizing the first character of the string, standardizing spacing after a colon, removing hyphens at the beginning of the string. The source and destination tables both have the comments field as a varchar
1000, not null data type with a key id between the source and destination tables. At another segment of our system, there were errors reporting nulls and when this was removed, everything cleared up. I can do a series of replace statements when
the data is required in reports but would rather have it clean in the destination table. The code is below:
CREATE TRIGGER [dbo].[destination_Update_trg]
ON [dbo].[destination]
AFTER UPDATE
AS
BEGIN
SET NOCOUNT ON;
IF EXISTS (SELECT *
FROM destination C
JOIN INSERTED I
ON I.PrimaryKeyID = C.PrimaryKey
WHERE I.Comments IS NOT NULL AND I.Comments <> '')
BEGIN
UPDATE T
SET T.Comments =
CASE
WHEN T.Comments <> '' AND LEFT(CAST(T.Comments AS VARCHAR (1000)), 2) LIKE '- %'
THEN SUBSTRING(T.Comments, 3, 1000)
END
FROM destination T
JOIN INSERTED I
ON T.primarykey = I.primarykey
WHERE T.primarykey = I.primarykey
UPDATE T
SET T.Comments = UPPER(LEFT(CAST(T.Comments AS VARCHAR (1000)), 1)) + SUBSTRING(CAST(T.Comments AS VARCHAR (1000)), 2, 1000)
FROM destination T
JOIN INSERTED I
ON T.primarykey = I.primarykey
WHERE T.primarykey = I.primarykey
UPDATE T
SET T.Comments = REPLACE(SUBSTRING(T.Comments, 1, 1000), ': ', ': ')-- '[A-9]: [A-9]'
FROM destination T
JOIN INSERTED I
ON T.primarykey = I.primarykey
WHERE T.primarykey = I.primarykey
AND SUBSTRING(T.Comments, 1, 1000) LIKE '%[A-Z]%: [A-Z]%'
END
RETURN
END;
GO
Perhaps there's a better way to accomplish the task. I appreciate your review and assistance. Thank you.

First, the trigger only fires when you do an UPDATE. I'm not sure from your description whether or not you are expecting this trigger to fire when you do an insert on dbo.destination. If you want it to fire on INSERTs, then you need to specify
FOR INSERT (or FOR INSERT, UPDATE if you want it to fire on both inserts and updates).
More importantly, the first update in your trigger does
SET T.Comments =
CASE
WHEN T.Comments <> '' AND LEFT(CAST(T.Comments AS VARCHAR (1000)), 2) LIKE '- %' THEN SUBSTRING(T.Comments, 3, 1000)
END
When you do a CASE and you don't have an ELSE clause, there is an implicit ELSE NULL clause added. So your update is equivalent to
SET T.Comments =
CASE
WHEN T.Comments <> '' AND LEFT(CAST(T.Comments AS VARCHAR (1000)), 2) LIKE '- %' THEN SUBSTRING(T.Comments, 3, 1000)
ELSE NULL
END
So your very first update sets the Comments column to NULL in every row that was updated where the Comments column is not like '- %'. You want to change the case statement to be
SET T.Comments =
CASE
WHEN T.Comments <> '' AND LEFT(CAST(T.Comments AS VARCHAR (1000)), 2) LIKE '- %' THEN SUBSTRING(T.Comments, 3, 1000)
ELSE T.Comments
END
(Or you can put the test in the where clause so that you only update those rows where the Comments column is like '- %'. That would look like
UPDATE T
SET T.Comments = SUBSTRING(T.Comments, 3, 1000)
END
FROM destination T
JOIN INSERTED I
ON T.primarykey = I.primarykey
WHERE LEFT(CAST(T.Comments AS VARCHAR (1000)), 2) LIKE '- %'
(Note that you do not need to include the T.Comments <> '' because if T.Comments is Like '- %', then it cannot be the empty string and you do not need to include WHERE T.primarykey = I.primarykey because you know that is true since you did an inner
join on T.primarykey = I.primarykey.
Tom

Informatica Night Update (Delta) Process - More than one Delta Source

We are setup to run a nightly process to update our DW with changes that took place that day in our Siebel OLTP environment. We refer to this as our "Delta Process" since it only updates rows that were chagned in the OLTP or adds new rows that were added to the OLTP. Here is our design:
* In our Siebel OLTP we have a View (V table) created that contains a view of only the records that have been changed since the last "Delta Process". This way we can identify only those rows that need to be updated. So in these examles when you see a table that is prefixed as "S_" it references the entire table and a table prefixed as "V_" references on only the changes to the underlying "S_" table.
Ex 1: Order Item table (S_ORDER_ITEM) joins to Account table (S_ORG_EXT). In the Informtica mapping SQ_JOINER we have a query to SELECT statements that with the results concatentated with a UNION statement. The first SELECT statement selects all rows from the V_ORDER_ITEM joined to the S_ORG_EXT so that all delta rows on the order item view are updated with the corresponding data from the account table (S_ORG_EXT). The second SELECT statement selects all rows from the S_ORG_ITEM joined to the V_ORG_EXT so that all of the order item records that contained account information that changed (per the view) are updated. The result is an updated Order Item DW table that contains all updates made to the Order Item and all any associated Accounts information that is stored on the Order Item.
SELECT A.*, B.* FROM V_ORDER_ITEM A, S_ORG_EXT B WHERE A.ORG_ID = B.ROW_ID
UNION
SELECT A.*, B.* FROM S_ORDER_ITEM A, V_ORG_EXT B WHERE A.ORG_ID = B.ROW_ID
The issues:_
This works fine when you have two tables joined together that contain deltas and you need only on UNION statement. However, the issue is when I have 14 tables joined to S_ORDER_ITEM that contain deltas. This cannot be accomlised (that I can see) with one UNION statement but you would need a UNION statement for each delta table.
Ex 2: This example contains just 3 tables. Order Item table (S_ORDER_ITEM) joins to Account table (S_ORG_EXT) and joins to Product table (S_PROD_INT). In this example you will need to have one UNION for each delta table. If you combine delta tables in the same union you will ultimately end up missing data in the final result. This is because the delta tables will only contain the rows that have changed and if one delta table contains a change and needs to pull data from another delta table that did not contain a corresponding change it will not pull the information.
SELECT A.*, B.*, C.* FROM V_ORDER_ITEM A, S_ORG_EXT B, S_PROD_INT C WHERE A.ORG_ID = B.ROW_ID AND A.PROD_ID = C.ROW_ID
UNION
SELECT A.*, B.*, C.* FROM S_ORDER_ITEM A, V_ORG_EXT B, S_PROD_INT C WHERE A.ORG_ID = B.ROW_ID AND A.PROD_ID = C.ROW_ID
UNION
SELECT A.*, B.*, C.* FROM S_ORDER_ITEM A, S_ORG_EXT B, V_PROD_INT C WHERE A.ORG_ID = B.ROW_ID AND A.PROD_ID = C.ROW_ID
The question:_
1. Is my understanding of how the delta process works correct?
2. Is my understanding that I will need a UNION for each delta table correct?
3. Is there another way to perform the delta process?
My issues are based upon the fact that I join roughly 15 delta tables and select about 100 columns to denormalize the data in the DW. If this is the only option that I have then this will generate an very large and complex query which would be very difficult to manage and udpate.
Thanks...

Hi,
Going thru your post, I find that you have the delta view (V_) and the main table (S_) as drivers, i.e you have two driver tables and hence you make outer joins (w.r.t each other) and make a union to get the complete set of data.
Can you please tell me why both are considered as drivers? Is there a possiability that the V_ view may not have some data but the corresponding S_table might have an update?
Regards,
Bharadwaj Hari

I can't seem to drag and drop more than one video on my timeline ? Only the audio will appear ?

Hello, I've been working on Premiere for a year now
I installed 2014 a week ago, and until today I haven't had any problems.
When I drag and drop the first video, everything works fine, until I try to drop another video.
The second video won't appear on the timeline, except for it's audio
Which is weird to me because everything worked well on the CS6
My sequence settings are
Custom
30 frames/second
16/9
sample rate : 44100Hz
quickTime
+H.264
The first video's properties:
Type: MPEG Movie
File Size: 576,0 MB
Image Size: 1920 x 1080
Frame Rate: 30,00
Source Audio Format: 44100 Hz - compressed - Mono
Project Audio Format: 44100 Hz - 32 bit floating point - Mono
Total Duration: 00:04:41:28
Pixel Aspect Ratio: 1,0
The second video's properties:
Type: MPEG Movie
File Size: 583,1 MB
Image Size: 1920 x 1080
Frame Rate: 29,97
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:04:45:15
Pixel Aspect Ratio: 1,0
(it's a .MTS)
What is weird, too, is that when I added the first video, I couldn't add it "Again", the same thing happened
Any help? I need to finish the project by tonight :/

My QuickTime version is the 10.4 (no idea if it's the latest one)
What do you mean by my system properties ? My mac ? If so then its a 16Gb 1600MHz DDR3 + Nvidia Geforce GT 750M 1024MB, an OS X Yosemite version 10.10
"What happens when you import the files onto a non-quicktime sequence?", well I don't know how to create a sequence before dragging a file on the timeline on this premiere, so I dragged the "Second video" first and it created a sequence with AVC Intra 100 1080i
29,97 frames/second
preview file format AVC-intra class100 1080i
what's weird is that I could add the second video once, but not twice, and I can add the "first" video several times (it's weird because the sequence was created from the second video's properties)
To answer your last question, the same thing happens too. I can create another sequence with the "Second video", add the "First video" 10 times but I won't be able to add the second video a second time.
On the other hand, when i created another sequence with the "first video", I will be able to add the first video as much as I want, but I won't even be able to add the "second" video once.

2.0.2 Update - Calls dropping more than before

Similar Messages

Maybe you are looking for