2.0 Hub, or not 2.0 Hub?

Hello folks...
Been a BT Broadband user for years and have happily used my creaking Origo adsl modem and trio of Linksys B/G wireless routers to distribute broadband around the house - and getting line speeds of around 6.5/.365 which is all groovy. except... creaking Origo modem now apparently locking up every hour or so and needs a reset so might be on the way out
I'd really appreciate some help/advice:
If it is the modem, I can just buy another one....or...I could finally unwrap my 2.0 Hub (which came with a 2.1 phone) which has been under my desk since last upgrade 18 months ago and use that.
Might not be the modem... might be the line or BT dropping the line out... If so, how do I test that?
I've read about "IP Profile" and line speeds.... could they drop if I move to the hub?
I've heard about a lot of drop-outs - is this a common problem with the hub?
I'm on an unlimited package, do BT use the hub to measure usage - I don't use tons but I heard the "unlimited" has some "fair useage" angles to it...
Is the hub a good box? reliable? quick? easy to manage?
Can I hang my trio of routers off it?
err..... thanks to anyone who can give advice.
Very much appreciated
Phil

Use the hub if your profile does drop it normally return within 48 hours bt measure your usage whether you use the hub or not i have always found the hub stable and easy to use the hub has 4 ports that you could hang off more routers if you should want too although the wireless range is very good
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Similar Messages

USB hub does not work! Help

I was attempting to install a KVM switch for my G4 and G5 that required me attaching my keyboard and mouse to the usb port on the back of the monitor.
The USB hub does not work! Monitor cable has no bent pins, and works perfectly for video with all my Mac's, G4's, G5's. The problem is I have had this monitor awhile and never tried these ports so apple won't help.
Anyone have any suggestions why these ports don't work and if there is a fix?
Can any one recommend a KVM switch that supports ADC, and USB so I bypass this hub.
Thanks

Some USB 2.0 hardware works very well w/USB 3.0 & some don't. Suggest that you contact the sound card manufacturer & ask them. Perhaps they can recommend a work-a-round.
Another user posted about the same problem some weeks ago regarding a sound card.

Open Hub does not work after upgrade

We just upgraded our BW production system from 3.0b into 3.5 and we are running support package level 09. Now we are facing serious problems with Open Hub.
After upgrade Open Hub delivering data from infocube into
csv-files does not work. When running the InfoSpoke it
will deliver 0 data records even though it should bring considerable amount of data.
There is no error message or short dump, it just do not deliver any data. InfoCube has data in place and it is available for reportoing. Extraction is made in FULL-mode and there is no transformations. Funny thing is that extraction from ODS or InfoObject works perfectly fine.
Has anyone idea how to solve this?
Thanks in advance,
JL

We ran into the same issue as Jari Laine today.
We just upgraded our BW sandbox environment from 3.0b into 3.5. We are running support package level 13, though. Now we are facing serious problems with Open Hub.
After the upgrade, our Open Hub which delivers data from an info cube into CSV-files does not work any more.
When running the Info Spoke it will deliver 0 data records even though it should bring a considerable amount of data.
There is no error message or short dump, it just does not deliver any data. The Info Cube has data in place and it is available for reporting.
The Extraction is made in FULL-mode and there are no transformations.
Has anyone an idea how to solve this?
Thanks in advance,
Marc

Audigy 4 Pro - I/O Hub does not get any po

Hello all,
I purchased an Audigy 4 Pro a few days ago and I cannot get the external hub to power on.
This somewhat sumarizes what I tried so far:
. Uninstalled all drivers and software of my old Soundblaster Li've 5. Platinum
2. Also removed all entries of the old soundcard from Device Manager
3. Powered down the PC fully, took out the Li've 5. and powered it back on and logged on to my Windows XP (SP2).
4. Just to be sure before installing the drivers for the Audigy 4 Pro I cleaned out the cookies, temporary internet files, all other Temp folders, the Prefetch folder and also ran a program to clean the registry.
5. De-activated my Norton AntiVirus Corporate Edition's Real-time protection, it's services and also my ZoneAlarm Pro from starting up the next time I reboot Windows.
6. Powered down the PC again, took the power cable out, made sure there was no power whatsoever left and carefull inserted the Audigy 4 Pro card in an empty PCI slot.
7. Connected the larger AD_Link to the card, then to the hub
8. Connected the smaller AD_Link to the card, then to the hub
9. Finally connected the power convertor cable to a free systems power unit
0. Double-checked the entire hardware setup a few times and power the PC back on
. Windows XP detected and installed the OHCI Compliant IEEE 394 Host Controller and the 394 Net Adapter
2. Canceled to proceed looking for a driver when it found the Audigy 4 Pro card
3. Installed the drivers and applications that came with the Audigy 4 Pro. Everything went smooth - no error messages during the installation.
4. Rebooted PC after prompting to do so.
5. With ZoneAlarm and my Norton Antivirus de-activated, all drivers and programs installed properly the external I/O hub does NOT get any power. I also made sure to check this with the remote control.
I have ofcourse no sound coming out that hub when plugging in my headphone and also cannot use my microphone.
6. I ran the Diagnostics program that was installed automatically with the other Creative applications: It claims there aren't any problems.
7. Powered down the PC again, checked all connectors, powered the PC up again: Same problem... no power.
8. Installed the latest 4-in- drivers found on viaarena.com: Same problem
9. Uninstalled and reinstalled the drivers and applications: Same problem
20. Uninstalled and reinstalled the drivers and applications after taking out all other PCI cards and placing the Audigy 4 Pro card into an other PCI slot: Same problem
2. Set my BIOS to factory defaults: Same problem
22. Formatted the PC and reinstalled Windows XP (SP) with every update thinkable... Same problem
23. Formatted the PC AGAIN ( ! ) and reinstalled Windows (SP2) with updates .... Same problem
Another problem: Sent a detailed e-mail to Creative Support Europe.... Still NO respons after 48+ hours.
Anyone else should have a solution I would appreciate trying out, or if all fails I'll go for a Terratec model.
Thanks in advance!
PC Stats: Asus A7V266 - VIA KT266 Chipset (VT8366 North Bridge with VT8233 South Bridge) / BIOS version: 0 / AMD Athlon .4GHz / 52Mb
Message Edited by HilTek on 07-05-2005 :04 PM

Amazing, I got mine about 3 days ago and have been pulling my hair out trying to resolve the same problem. I have checked power connections, reinstalled drivers. I think something is wrong with the box. I tried to call support yesterday, which was a Saturday, but they aren't available til Monday. I guess I will call them Monday. Let me know if you find anything out in the mean time.
Thanks
John
AMD Athlon(tm) 64 FX-57 Processor
A8N-SLI Premium
NVIDIA GeForce 7800 GTX
GB RAM
WIN Pro x64

BT Home Hub 5 not recognising print server

Decided to approach the forum as I have run out of ideas for fixing this problem.
I originally had a BT Home Hub 3 which worked fine with my HP Designjet 500ps plus using using a wireless HP Jetdirect EW2400 print server. I then upgraded to BT Infinity using a BT Home Hub 5 that's when my problems started.
The hub does not recognise the print server in wireless mode so the following is what I tried to no avail:
1. The printer setup was updated for the new hub online (192.168.1.75) for new SSID.
2. Reset hub.
3. Print server confirmed transmitting.
BT Home Hub Manager
4. Re-configured for Ch 11 and 12, preferred Designjet channel.
5. Changed 2.4ghz & 5ghz to different SSID names.
6. Unsync 2.4ghz & 5ghz.
7. Disabled 5ghz.
8. Tried Port Forwarding to allow access.
9. AVG Anti-Virus elminated from possible problem.
10. Ping confirmed 192.168.1.75 inaccessable.
The good point, I can plot using network cable but trailing it through the house to the large plotter is not desireable!
There must be someone else out there with the same plotter and problem so if someone could help it would much
appreciated.

Hi Alienr,
Welcome and thanks for posting. Sorry you're having problems. Have you had a a look at How to set up a wireless connection?
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Service Hub Transport not started

Hi all
I have single virtual machine with Win2008EEx64 with role Domain Controller i try install Exchange 2010 with roles Mailbox,CAS and HUB When i install HUB role occur error. Service HUB Transport not start :(
Here link with error http://img7.imageshack.us/img7/1245/errorhub.jpg I can Uploading full logs install Exchange 2010. Perhaps do you have
concurrent errors ?
Small fragment log :(
"[04/18/2009 12:43:51.0403] [1] Processing component 'Bridgehead Service Configuration' (Starting Hub Transport services).
[04/18/2009 12:43:51.0403] [1] Executing 'if ($RoleStartTransportService) { start-SetupService -ServiceName MSExchangeTransport }', handleError = False
[04/18/2009 12:43:51.0403] [2] Launching sub-task '$error.Clear(); if ($RoleStartTransportService) { start-SetupService -ServiceName MSExchangeTransport }'.
[04/18/2009 12:43:51.0403] [2] Runspace context: Executing user: Exchange2010.local/Users/Administrator, Executing user organization: , Current organization: .
[04/18/2009 12:43:51.0403] [2] Beginning processing.
[04/18/2009 12:43:51.0403] [2] Current ScopeSet is: {Domain Read Scope: {, }, Domain Write Scope(s): {, }, Configuration Scope: {, }, Server Configuration Scope(s): , Exclusive Scope: {, }}
[04/18/2009 12:43:51.0403] [2] Resolved current organization: .
[04/18/2009 12:43:53.0840] [2] The maximum wait for the operation is set to '00:15:00'.
[04/18/2009 12:43:53.0840] [2] [WARNING] Service checkpoint has not progressed. Previous checkpoint='0'- Current checkpoint='0'.
[04/18/2009 12:43:53.0840] [2] Previous service status query time is '4/18/2009 4:43:53 PM'.
[04/18/2009 12:43:53.0840] [2] Current service status query time is '4/18/2009 4:43:53 PM'.
[04/18/2009 12:43:53.0840] [2] Will wait '2000' milliseconds for the service 'MSExchangeTransport' to reach status 'Running'.
[04/18/2009 12:43:55.0934] [2] Service 'MSExchangeTransport' failed to reach status 'Running' on this server after waiting for '2000' milliseconds.
[04/18/2009 12:43:55.0934] [2] The remaining time for service status change is '00:14:58'.
[04/18/2009 12:43:55.0934] [2] Service checkpoint has progressed. Previous checkpoint='0' - Current checkpoint='1'.
[04/18/2009 12:43:55.0934] [2] Will wait '90000' milliseconds for the service 'MSExchangeTransport' to reach status 'Running'.
[04/18/2009 12:45:26.0012] [2] Service 'MSExchangeTransport' failed to reach status 'Running' on this server after waiting for '90000' milliseconds.
[04/18/2009 12:45:26.0012] [2] The remaining time for service status change is '00:13:28'.
[04/18/2009 12:45:26.0012] [2] [WARNING] Service checkpoint has not progressed. Previous checkpoint='1'- Current checkpoint='1'.
[04/18/2009 12:45:26.0012] [2] Previous service status query time is '4/18/2009 4:43:55 PM'.
[04/18/2009 12:45:26.0012] [2] Current service status query time is '4/18/2009 4:45:26 PM'.
[04/18/2009 12:45:26.0012] [2] Will wait '90000' milliseconds for the service 'MSExchangeTransport' to reach status 'Running'.
[04/18/2009 12:46:56.0043] [2] Service 'MSExchangeTransport' failed to reach status 'Running' on this server after waiting for '90000' milliseconds.
[04/18/2009 12:46:56.0043] [2] The remaining time for service status change is '00:11:58'.
[04/18/2009 12:46:56.0043] [2] [WARNING] Service checkpoint has not progressed. Previous checkpoint='1'- Current checkpoint='1'.
[04/18/2009 12:46:56.0043] [2] Previous service status query time is '4/18/2009 4:43:55 PM'.
[04/18/2009 12:46:56.0043] [2] Current service status query time is '4/18/2009 4:46:56 PM'.
[04/18/2009 12:46:56.0043] [2] Will wait '90000' milliseconds for the service 'MSExchangeTransport' to reach status 'Running'.
[04/18/2009 12:48:26.0293] [2] Service 'MSExchangeTransport' failed to reach status 'Running' on this server after waiting for '90000' milliseconds.
[04/18/2009 12:48:26.0293] [2] The remaining time for service status change is '00:10:28'.
[04/18/2009 12:48:26.0293] [2] [WARNING] Service checkpoint has not progressed. Previous checkpoint='1'- Current checkpoint='1'.
[04/18/2009 12:48:26.0293] [2] Previous service status query time is '4/18/2009 4:43:55 PM'.
[04/18/2009 12:48:26.0293] [2] Current service status query time is '4/18/2009 4:48:26 PM'.
[04/18/2009 12:48:26.0293] [2] Will wait '90000' milliseconds for the service 'MSExchangeTransport' to reach status 'Running'.
[04/18/2009 12:49:56.0465] [2] Service 'MSExchangeTransport' failed to reach status 'Running' on this server after waiting for '90000' milliseconds.
[04/18/2009 12:49:56.0465] [2] The remaining time for service status change is '00:08:58'.
[04/18/2009 12:49:56.0465] [2] [WARNING] Service checkpoint has not progressed. Previous checkpoint='1'- Current checkpoint='1'.
[04/18/2009 12:49:56.0465] [2] Previous service status query time is '4/18/2009 4:43:55 PM'.
[04/18/2009 12:49:56.0465] [2] Current service status query time is '4/18/2009 4:49:56 PM'.
[04/18/2009 12:49:56.0465] [2] Will wait '90000' milliseconds for the service 'MSExchangeTransport' to reach status 'Running'.
[04/18/2009 12:51:26.0481] [2] Service 'MSExchangeTransport' failed to reach status 'Running' on this server after waiting for '90000' milliseconds.
[04/18/2009 12:51:26.0481] [2] The remaining time for service status change is '00:07:28'.
[04/18/2009 12:51:26.0481] [2] [WARNING] Service checkpoint has not progressed. Previous checkpoint='1'- Current checkpoint='1'.
[04/18/2009 12:51:26.0481] [2] Previous service status query time is '4/18/2009 4:43:55 PM'.
[04/18/2009 12:51:26.0481] [2] Current service status query time is '4/18/2009 4:51:26 PM'.
[04/18/2009 12:51:26.0481] [2] Will wait '90000' milliseconds for the service 'MSExchangeTransport' to reach status 'Running'.
[04/18/2009 12:52:56.0496] [2] Service 'MSExchangeTransport' failed to reach status 'Running' on this server after waiting for '90000' milliseconds.
[04/18/2009 12:52:56.0496] [2] The remaining time for service status change is '00:05:58'.
[04/18/2009 12:52:56.0496] [2] [WARNING] Service checkpoint has not progressed. Previous checkpoint='1'- Current checkpoint='1'.
[04/18/2009 12:52:56.0496] [2] Previous service status query time is '4/18/2009 4:43:55 PM'.
[04/18/2009 12:52:56.0496] [2] Current service status query time is '4/18/2009 4:52:56 PM'.
[04/18/2009 12:52:56.0496] [2] Will wait '90000' milliseconds for the service 'MSExchangeTransport' to reach status 'Running'.
[04/18/2009 12:54:26.0668] [2] Service 'MSExchangeTransport' failed to reach status 'Running' on this server after waiting for '90000' milliseconds.
[04/18/2009 12:54:26.0668] [2] The remaining time for service status change is '00:04:28'.
[04/18/2009 12:54:26.0668] [2] [WARNING] Service checkpoint has not progressed. Previous checkpoint='1'- Current checkpoint='1'.
[04/18/2009 12:54:26.0668] [2] Previous service status query time is '4/18/2009 4:43:55 PM'.
[04/18/2009 12:54:26.0668] [2] Current service status query time is '4/18/2009 4:54:26 PM'.
[04/18/2009 12:54:26.0668] [2] Will wait '90000' milliseconds for the service 'MSExchangeTransport' to reach status 'Running'.
[04/18/2009 12:55:56.0700] [2] Service 'MSExchangeTransport' failed to reach status 'Running' on this server after waiting for '90000' milliseconds.
[04/18/2009 12:55:56.0700] [2] The remaining time for service status change is '00:02:58'.
[04/18/2009 12:55:56.0700] [2] [WARNING] Service checkpoint has not progressed. Previous checkpoint='1'- Current checkpoint='1'.
[04/18/2009 12:55:56.0700] [2] Previous service status query time is '4/18/2009 4:43:55 PM'.
[04/18/2009 12:55:56.0700] [2] Current service status query time is '4/18/2009 4:55:56 PM'.
[04/18/2009 12:56:10.0246] [2] Generated Watson report with dump for the service MSExchangeTransport
[04/18/2009 12:56:10.0246] [2] [ERROR] Unexpected Error
[04/18/2009 12:56:10.0246] [2] [ERROR] Service 'MSExchangeTransport' failed to reach status 'Running' on this server.
[04/18/2009 12:56:10.0262] [2] Ending processing.
[04/18/2009 12:56:10.0262] [1] The following 1 error(s) occurred during task execution:
[04/18/2009 12:56:10.0262] [1] 0. ErrorRecord: Service 'MSExchangeTransport' failed to reach status 'Running' on this server.
[04/18/2009 12:56:10.0262] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.ServiceDidNotReachStatusException: Service 'MSExchangeTransport' failed to reach status 'Running' on this server.
[04/18/2009 12:56:10.0278] [1] [ERROR] The execution of: "$error.Clear(); if ($RoleStartTransportService) { start-SetupService -ServiceName MSExchangeTransport }", generated the following error: "Service 'MSExchangeTransport' failed to reach status 'Running' on this server.".
[04/18/2009 12:56:10.0278] [1] [ERROR] Service 'MSExchangeTransport' failed to reach status 'Running' on this server.
[04/18/2009 12:56:10.0278] [1] [WARNING] <<< Setup failed to execute a task. Dumping all variables.... >>>
[04/18/2009 12:56:10.0278] [1] $ =
[04/18/2009 12:56:10.0278] [1] ? = True
[04/18/2009 12:56:10.0278] [1] ^ =
[04/18/2009 12:56:10.0278] [1] _ =
[04/18/2009 12:56:10.0278] [1] addressSpace = MOBILE:*
[04/18/2009 12:56:10.0278] [1] agent =
[04/18/2009 12:56:10.0278] [1] agentAssembly = C:\Program Files\Microsoft\Exchange Server\V14\bin\Microsoft.Exchange.MobileDriver.dll
[04/18/2009 12:56:10.0278] [1] agentFactory = Microsoft.Exchange.TextMessaging.MobileDriver.TextMessagingDeliveryAgentFactory
[04/18/2009 12:56:10.0278] [1] agentName = Text Messaging Delivery Agent
[04/18/2009 12:56:10.0278] [1] args =
[04/18/2009 12:56:10.0278] [1] assembly = Microsoft.Exchange.ProvisioningAgent.dll
[04/18/2009 12:56:10.0278] [1] classFactory = Microsoft.Exchange.ProvisioningAgent.AdminLogAgentClassFactory
[04/18/2009 12:56:10.0278] [1] comClassFile = C:\Program Files\Microsoft\Exchange Server\V14\bin\Monitoring\x86\DiagnosticCmdletController.dll
[04/18/2009 12:56:10.0278] [1] ConfirmPreference = None
[04/18/2009 12:56:10.0278] [1] connector = Text Messaging Delivery Agent Connector
[04/18/2009 12:56:10.0278] [1] connectorName = Text Messaging Delivery Agent Connector
[04/18/2009 12:56:10.0278] [1] ConsoleFileName =
[04/18/2009 12:56:10.0278] [1] DebugPreference = SilentlyContinue
[04/18/2009 12:56:10.0278] [1] deliveryProtocol = MOBILE
[04/18/2009 12:56:10.0278] [1] dllFile = C:\Program Files\Microsoft\Exchange Server\V14\bin\ExSMIME.dll
[04/18/2009 12:56:10.0278] [1] Error = System.Collections.ArrayList
[04/18/2009 12:56:10.0278] [1] ErrorActionPreference = Continue
[04/18/2009 12:56:10.0278] [1] ErrorView = NormalView
[04/18/2009 12:56:10.0278] [1] ExchangePropertyContainer = Microsoft.Exchange.Configuration.Tasks.ExchangePropertyContainer
[04/18/2009 12:56:10.0278] [1] ExecutionContext = System.Management.Automation.EngineIntrinsics
[04/18/2009 12:56:10.0278] [1] exsSid = S-1-5-21-3189551677-1878205415-1818128433-1104
[04/18/2009 12:56:10.0278] [1] false = False
[04/18/2009 12:56:10.0278] [1] file = microsoft.exchange.protectedservicehost.exe.config
[04/18/2009 12:56:10.0278] [1] FormatEnumerationLimit = 4
[04/18/2009 12:56:10.0278] [1] fullPath = C:\Program Files\Microsoft\Exchange Server\V14\bin\microsoft.exchange.protectedservicehost.exe
[04/18/2009 12:56:10.0278] [1] HOME = C:\Users\Administrator
[04/18/2009 12:56:10.0278] [1] Host = System.Management.Automation.Internal.Host.InternalHost
[04/18/2009 12:56:10.0278] [1] input =
[04/18/2009 12:56:10.0278] [1] installedAgents =
[04/18/2009 12:56:10.0278] [1] InternalPowerShellUrl = https://WIN-EMFQIRKOWAL.Exchange2010.local/powershell
[04/18/2009 12:56:10.0278] [1] journalAgent =
[04/18/2009 12:56:10.0278] [1] localSite = Exchange2010.local/Configuration/Sites/Default-First-Site-Name
[04/18/2009 12:56:10.0278] [1] localSiteEdgeSyncConfig =
[04/18/2009 12:56:10.0278] [1] localSiteName = Default-First-Site-Name
[04/18/2009 12:56:10.0278] [1] MaximumAliasCount = 4096
[04/18/2009 12:56:10.0278] [1] MaximumDriveCount = 4096
[04/18/2009 12:56:10.0278] [1] MaximumErrorCount = 256
[04/18/2009 12:56:10.0278] [1] MaximumFunctionCount = 4096
[04/18/2009 12:56:10.0278] [1] MaximumHistoryCount = 64
[04/18/2009 12:56:10.0278] [1] MaximumVariableCount = 4096
[04/18/2009 12:56:10.0278] [1] mflFilePath = C:\Program Files\Microsoft\Exchange Server\V14\bin\en\Exchange.MFL
[04/18/2009 12:56:10.0278] [1] mofFilePath = C:\Program Files\Microsoft\Exchange Server\V14\bin\Exchange.MOF
[04/18/2009 12:56:10.0278] [1] MyInvocation =
[04/18/2009 12:56:10.0278] [1] NestedPromptLevel = 0
[04/18/2009 12:56:10.0278] [1] null =
[04/18/2009 12:56:10.0278] [1] organizationConfig = Exchange2007
[04/18/2009 12:56:10.0278] [1] OutputEncoding = System.Text.ASCIIEncoding
[04/18/2009 12:56:10.0278] [1] PID = 2380
[04/18/2009 12:56:10.0278] [1] ProgressPreference = Continue
[04/18/2009 12:56:10.0278] [1] PSBoundParameters = System.Collections.Generic.Dictionary`2[System.String,System.Object]
[04/18/2009 12:56:10.0278] [1] PSCmdlet =
[04/18/2009 12:56:10.0278] [1] PSCulture = en-US
[04/18/2009 12:56:10.0278] [1] PSEmailServer =
[04/18/2009 12:56:10.0278] [1] PSHOME = C:\Windows\system32\WindowsPowerShell\v1.0\
[04/18/2009 12:56:10.0278] [1] PSMaximumReceivedDataSizePerCommandMB = 2047
[04/18/2009 12:56:10.0278] [1] PSMaximumReceivedObjectSizeMB = 2047
[04/18/2009 12:56:10.0278] [1] PSSessionApplicationName = wsman
[04/18/2009 12:56:10.0278] [1] PSSessionConfigurationName = http://schemas.microsoft.com/powershell/Microsoft.PowerShell
[04/18/2009 12:56:10.0278] [1] PSTypePath =
[04/18/2009 12:56:10.0278] [1] PSUICulture = en-US
[04/18/2009 12:56:10.0278] [1] PSVersionTable = System.Collections.Hashtable
[04/18/2009 12:56:10.0278] [1] PWD = C:\Windows\Temp\ExchangeSetup
[04/18/2009 12:56:10.0278] [1] regsvr = C:\Windows\system32\regsvr32.exe
[04/18/2009 12:56:10.0278] [1] regSvr32WOW = C:\Windows\sysWOW64\regsvr32.exe
[04/18/2009 12:56:10.0278] [1] ReportErrorShowExceptionClass = 0
[04/18/2009 12:56:10.0278] [1] ReportErrorShowInnerException = 0
[04/18/2009 12:56:10.0278] [1] ReportErrorShowSource = 1
[04/18/2009 12:56:10.0278] [1] ReportErrorShowStackTrace = 0
[04/18/2009 12:56:10.0278] [1] RoleBinPath = C:\Program Files\Microsoft\Exchange Server\V14\Bin
[04/18/2009 12:56:10.0278] [1] RoleCustomerFeedbackEnabled = True
[04/18/2009 12:56:10.0278] [1] RoleDatacenterPath = C:\Program Files\Microsoft\Exchange Server\V14\Datacenter
[04/18/2009 12:56:10.0278] [1] RoleDatacenterServiceEndpointABCHContactService = <ServiceEndpoint><Url>http://pvt-contacts.msn.com/abservice/abservice.asmx</Url></ServiceEndpoint>
[04/18/2009 12:56:10.0278] [1] RoleDatacenterServiceEndpointDomainPartnerManageDelegation = <ServiceEndpoint><Url>https://domains.live.com/service/managedelegation.asmx</Url></ServiceEndpoint>
[04/18/2009 12:56:10.0278] [1] RoleDatacenterServiceEndpointLiveFederationDeprecatedMetadata = <ServiceEndpoint><Url>https://nexus.passport.com/FederationMetadata/2006-02/FederationMetadata.xml</Url></ServiceEndpoint>
[04/18/2009 12:56:10.0278] [1] RoleDatacenterServiceEndpointLiveGetUserRealm = <ServiceEndpoint><Url>https://login.live.com/GetUserRealm.srf</Url></ServiceEndpoint>
[04/18/2009 12:56:10.0278] [1] RoleDatacenterServiceEndpointLiveRmsCertificationService = <ServiceEndpoint><Url>https://licensing.drm.microsoft.com/licensing/licensing.asmx</Url><CertificateSubjectName>TO BE FILLED IN </CertificateSubjectName></ServiceEndpoint>
[04/18/2009 12:56:10.0278] [1] RoleDatacenterServiceEndpointLiveRmsLicensingService = <ServiceEndpoint><Url>https://certification.drm.microsoft.com/certification/certification.asmx</Url><CertificateSubjectName>TO BE FILLED IN </CertificateSubjectName></ServiceEndpoint>
[04/18/2009 12:56:10.0278] [1] RoleDatacenterServiceEndpointLiveRmsPublishingService = <ServiceEndpoint><Url>https://licensing.drm.microsoft.com/licensing/publish.asmx</Url><CertificateSubjectName>TO BE FILLED IN </CertificateSubjectName></ServiceEndpoint>
[04/18/2009 12:56:10.0278] [1] RoleDatacenterServiceEndpointLiveServiceLogin2 = <ServiceEndpoint><Url>https://login.live.com/RST2.srf</Url></ServiceEndpoint>
[04/18/2009 12:56:10.0278] [1] RoleDatacenterServiceEndpointRmsPremiseAuthenticationCertificate = <ServiceEndpoint><CertificateSubjectName>CN=exchangelabs.live-int.com, OU=Exchange, O=Microsoft, L=Redmond, S=Washington, C=US</CertificateSubjectName></ServiceEndpoint>
[04/18/2009 12:56:10.0278] [1] RoleDomainController = WIN-EMFQIRKOWAL.Exchange2010.local
[04/18/2009 12:56:10.0278] [1] RoleFqdnOrName = WIN-EMFQIRKOWAL.Exchange2010.local
[04/18/2009 12:56:10.0278] [1] RoleInstallationMode = Install
[04/18/2009 12:56:10.0278] [1] RoleInstallPath = C:\Program Files\Microsoft\Exchange Server\V14\
[04/18/2009 12:56:10.0278] [1] RoleInvocationID = 20090418-1525100043514005697
[04/18/2009 12:56:10.0278] [1] RoleIsAdminToolsRoleInstalled = True
[04/18/2009 12:56:10.0278] [1] RoleIsDatacenter = False
[04/18/2009 12:56:10.0278] [1] RoleLanguagePacksPath = C:\1\
[04/18/2009 12:56:10.0278] [1] RoleLoggedOnUser = EXCHANGE2010\Administrator
[04/18/2009 12:56:10.0278] [1] RoleLoggingPath = C:\Program Files\Microsoft\Exchange Server\V14\Logging
[04/18/2009 12:56:10.0278] [1] RoleNetBIOSName = WIN-EMFQIRKOWAL
[04/18/2009 12:56:10.0278] [1] RolePreviousVersion =
[04/18/2009 12:56:10.0278] [1] RoleProductPlatform = amd64
[04/18/2009 12:56:10.0278] [1] RoleRoleName = BridgeheadRole
[04/18/2009 12:56:10.0278] [1] RoleRoles = AdminToolsRole
[04/18/2009 12:56:10.0278] [1] RoleSetupLoggingPath = C:\ExchangeSetupLogs
[04/18/2009 12:56:10.0278] [1] RoleStartTransportService = True
[04/18/2009 12:56:10.0278] [1] RoleTargetVersion = 14.00.0482.020
[04/18/2009 12:56:10.0278] [1] RoleUpdatesDir = C:\1\Updates
[04/18/2009 12:56:10.0278] [1] server = WIN-EMFQIRKOWAL
[04/18/2009 12:56:10.0278] [1] ShellId = Microsoft.PowerShell
[04/18/2009 12:56:10.0278] [1] StackTrace =
[04/18/2009 12:56:10.0278] [1] this =
[04/18/2009 12:56:10.0278] [1] true = True
[04/18/2009 12:56:10.0278] [1] user = Exchange2010.local/Users/Administrator
[04/18/2009 12:56:10.0278] [1] vdirName = PowerShell
[04/18/2009 12:56:10.0278] [1] VerbosePreference = SilentlyContinue
[04/18/2009 12:56:10.0278] [1] w3svc = System.ServiceProcess.ServiceController
[04/18/2009 12:56:10.0278] [1] WarningPreference = Continue
[04/18/2009 12:56:10.0278] [1] wasRunning = True
[04/18/2009 12:56:10.0278] [1] WhatIfPreference = False
[04/18/2009 12:56:10.0278] [1] WSManMaxRedirectionCount = 5
[04/18/2009 12:56:10.0278] [1] [WARNING] <<< Variable dumping complete. >>
[04/18/2009 12:56:10.0309] [1] Setup is halting task execution because of one or more errors in a critical task.
[04/18/2009 12:56:10.0309] [1] Finished executing component tasks.
[04/18/2009 12:56:10.0371] [1] Ending processing.
[04/18/2009 13:07:51.0090] [0] [WARNING] Setup has made changes to operating system settings that require a reboot to take effect. Please reboot this server prior to placing it into production.
[04/18/2009 13:07:51.0153] [0] End of Setup
[04/18/2009 13:07:51.0153] [0] **********************************************

Hi
I tested your problem in test lab and when desable ip v6 on network connection Transport service will take long time to start.
Try again after enable ipv6.
BTW-Also i was found good article for similar case with your case 
http://www.exchangeinbox.com/article.aspx?i=111
RegardsChinthaka
-If you think my thread is helpful for you, Please vote.

SignalR - Two Hubs must not share the same name

I created asp.net mvc 5 application (call it "WebServices"), then i add my Hubs in a folder called "Hubs". Now
what happened is that SignalR (2.0.2) generate JavaScript proxies for hubs in environment: 1-in local machine. 2-when i publish to azure web role. Now when i publish to azure website (.NET is 4.5 and websocket is opened),it didn't generate proxies. Now i tried
to add hubs to App_Code folder ,and it generate proxies ,but the build action of the hub classes are "Content",when i change it to Compile it raised this exception :
Two Hubs must not share the same name. 'Webservices.App_Code.MyHub1, App_Code.c9aucf2j, Version=0.0.0.0,
Culture=neutral, PublicKeyToken=null' and 'Webservices.App_Code.MyHub1, Webservices, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' both share the name 'MyHub1'.
I love Silverlight ^^

Hello,
It seems this issue is more reagrding ASP.NET MVC, I suggest you posting to:
http://forums.asp.net/1146.aspx
There are MVC experts who will help you better.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Why will my I phone 5 connect to bt open zone but not bt home hub?

Why will my I phone 5 connect to bt open zone but not bt home hub?

ConnorATY wrote:
Why will my I phone 5 connect to bt open zone but not bt home hub?
It means your iPhone Wi-Fi is working.
You might need to download/update your router firmware and do a router reboot.

Home Hub 3 - Impact of changing Hub IP Gateway Add...

Hi all,
After some help/reassurance here please!
I just had an Infinity installation along with a new Home Hub 3 type B
I noticed some problems using some applications run over a VPN to a company I am working for
One of their network techies told me this (excuse the English, it is a Swiss company):
In this case, there is a wrong configuration of the local router/dns server.
The returned IP 92.242.132.15 is an intenet address. The local physiical network has a configured DNS on 192.168.1.254, this address is reserved for special use on the Cisco security agent. The local router device must be reconfigured to not be a DNS or not use 192.168.1.254.
Looking at the Hub settings sure enough 192.168.1.254 is the Hub IP Gateway Address.
There are some instructions here on BT site on how to change the settings
But, if I follow these and change:
DHCP Server Enable from Yes to No
Hub IP Gateway Address from 192.168.1.254 to 192.168.1.253
DHCP Network Range End address from 192.168.1.253 to 192.168.1.252
Will this cause any problems?
Thanks in advance for your help
Solved!
Go to Solution.

OK... no one knows. Fair enough.
Thought I would answer myself in case it helps anyone using the search facility in the future.
I found that in fact you can reset the hub to a different preset range of IP addresses. 172.16.0.nn
This worked fine, and does NOT reboot the hub in case anyone is concerned about that.
Note you may need to renew the DHCP lease on the attached PCs... this is simply opening a command prompt:
type "ipconfig" (no ") if that shows an IP address in the old range then type
ipconfig /release - should now have zeros
ipconfig /renew - should now have an IP address in new range
One of the techies that did not answer this may say you do not need the "release" first. But I was not sure so did both.
This also fixed the contention with the VPN's Cisco Security Agent

USB Hub does not work on boot up, but OK after dis/reconnecting

I just set up a D-Link USB 7-Port 2.0 Hub. I use a Mac G5 2.7Ghz which has USB 2.0. I've got the hub connected to one of the USB ports on the rear of the G5. Connected to the hub are my keyboard (Apple's older black and grey model), trackball, iPod dock, printer, Steinberg Key, iLok and Logic Key. Both the dock and keyboard have USB extension cables. When I boot up, my track mouse, keyboard, Logic key etc., do not respond until I unplug the main USB connection to the Hub and then reconnect it, and sometimes, I must do this for each device -- for example, when I boot up Logic, it doesn't find the key until I reconnect the hub. I have updated all drivers for the devices connected -- Trackball, keys, iLok, Printer etc. Might the USB extension cables affect the Hub? Any help would be very appreciated. Thanks.

yes that is the case, the modules that I need are blacklisted. Some how it did not occur to me to check.
Thanks
ls -1 /etc/modprobe.d/ returns:
total 16
-rw-r--r-- 1 root root 34 Jul 13 13:02 blacklist_net.conf
-rw-r--r-- 1 root root 182 Jul 13 13:02 blacklist_sound.conf
-rw-r--r-- 1 root root 55 Jun 25 06:30 modprobe.conf
-rw-r--r-- 1 root root 196 Apr 8 02:08 usb-load-ehci-first.conf
[Edit] just rebooted and everything works now without having to modprobe. also I should probably add that I did the installation with archboot, I saw this mentioned somewhere.
Last edited by jesseFrey (2011-08-11 14:24:09)

USB Hub does not work

I recently purchased this USB hub.
http://www.jascoproducts.com/products/pc/viewPrd.asp?idproduct=8&idcategory=13
My laptop cooler is able to be power through the USB hub.
However, my mouse, keyboard, and external harddrives are not working. For instance, the laser on the optical mouse is not even lighting up.
My mouse, Keyboard, and external hard drive works fine when it is connected directly to the USB pots on my macbook Pro.
Is this a compatibility issue? I mean, GE says that the hub works with mac os. And for a generic hub like this, there shouldn't be any issues right?
Message was edited by: wlfpck

Hi wifpck;
The first problem I see with this hub is that it is USB 1.1 which is a very slow out of date protocol.
Secondly it doesn't appear to be a powered hub. Hence all of the power for the hub must come from the USB on your Mac. Powering laptop cooler maybe over loading the USB port. I would suggest that you try it without the laptop cooler connected and see if works better that way.
Allan

USB hub does not work with iTunes

I have been trying to add USB ports to may Mac's and am not able to synch through the hub. They are hi speed 2.0 USB hubs by Rocketfish and Belkin. iTunes locks up until I remove them from the USB cable (spinning color wheel) and then iTunes goes back to normal. I have tried with both my 24" Intel iMac (Metal one) and a new 15" Macbook Pro. When I use the USB port on the Mac iTunes works great. There seem to be a ton of USB problems posted and zero answers on how to correct. I have tried with an Color iPOD, iPhone and an iTouch to no avail. Having a couple of USB ports won't work in my situation. Anyone know if Apple has posted a workaround or a real fix anywhere.

Thanks, I missed where I posted But I tried with my HP - Same issue. I think others have had this. I believe that iTunes is hit or miss on Hubs. I wish I could figure out what makes them a hit - instead of a miss.

Open Hub is not working after upgrade

Hi Guys,
I did an SAP BI upgrade from 7.0 to 7.3.
The open hub destination was working fine before the upgrade, I could see the data coming in the file.
After the upgrade, there is no data coming to the file. System says "no data available".
Did anyone encounter this issue before?

Hi,
Did you follow the same? Try to look into this angle.
Deleting Data from the Table
With an extraction to a database table, you can either retain the history of the data or just
store the new data in the table. Choose Delete Data from Table when defining your
destination if you want to overwrite the fields. In this case, the table is completely deleted and
regenerated before each extraction takes place. We recommend that you use this mode if you
do not want to store the history of the data in the table. If you do not select this option, the
system only generates the table once before the first extraction. We recommend that you use
this mode if you want to retain the history of the extracted data.
Note that if changes are made to the properties of the database table (for example, fields are
added), the table is always deleted and regenerated.
Regards,
Suman

IPOD SHUFFLE PLUGGED INTO USB HUB BUT NOT BEING READ

I recently got a 4 port USB hub because I needed extra usb ports. I mainly use the hub to connect my flash drive, external hard drive and my IPOD shuffle, but the only thing that isn't getting read by the computer is the shuffle. Everything else that is conncected to the hub is being read by windows. The shuffle just sits there, when plugged into the hub, blinking a green light (which doesn't look normal). The hub itself is a 2.0 hub. HELP!

I had the same problem. FIRST, I had to remove the software that came with the original ipod shuffle. 2005/06/26, and replace it with the older version 2005/01/11 that I found on this site: http://www.opendrivers.com/driver/220012/apple-ipod-ipod-mini-ipod-photo-ipod-sh uffle-software-updater-2005-01-11-windows-2000-xp-free-download.html
Once in a while it still doesn't recognize the ipod, but I think that's a usb port problem. Unplug it and plug it in again and it should be fine. Just make sure you remove the original software first in the add/remove programs section!
Also, if Mac is so good (according to some people on this site), why did Mac start using the Windows XP software and not vice-versa!!! haha
Good Luck!!!
pentium IV 2.3 Windows XP

Port Forwarding on Home Hub 5 not working

Hi,
Is anybody else having problems getting ports to forward on their Home Hub or Home Hub 5?
I am a new BT customer, less than a week infact and BT have been utterly hopeless in getting this resolved. All they do is send me instructions for port forwarding on a homehub which I do not need and tell me that i need to pay for their tech support to investigate it further which is freaking ridiculous considering port forwarding is an essential part of any router and this router is brand new, less than a week old. (Do BMW sell you a car and then refuse to take responsibility for a broken engine?)
My other option is buying an ADSL 802.11ac router for £150 which out of principle, i dont think i should have to do. One of the reasons i came to BT in the first place was because the homehub is supposed to be one of the best free provider supplied routers around.
Please only reply to this if you know what you are talking about or have experienced this same issue yourselves. I reiterate that I have not missed any configuration steps on my part and this is a case of the homehub simply not working as it is designed.
Scenario:
I like to have remote desktop access to my home computer from external networks. I do not use 3rd party software such as 'log me in' or 'team viewer', I like to use Microsoft Remote desktop and had been doing so for years with my Sky broadband until last week.
I have dynamic DNS running on my machine which updates my constantly changing external IP to the dns server so dont worry about that, thats all good.
I have correctly set up the forwarding of TCP 3389 to the static I.P of my home desktop on the homehub (and rebooted and or factory reset several times)
Result:
Nothing. The homehub displays as though it has forwarded the ports yet i am still unable to remote in from an external network. The port shows as closed when i run a port scanner.
The same goes for other ports I have tried to open. For example, my Xbox One.
BT are sending me out a replacement Hub to try but I fear that this will have the same result as i have seen a few other people post with the same issues.
If anybody has experienced and or resolved this, please let me know and i will be forever grateful
Thank you

When you do a major network revision always reset the TC to factory and start over.. it simply remembers too much of the last setup.
Plug WAN TC into the HH5 and run through the airport utility again. The TC must go into bridge mode. It then should work fine, but I recommend particularly with Mavericks you use strict naming.
Not apple names.. long, loose and loopy.
Names that are short, 2-10 characters is plenty but make an upper limit of 20.
No spaces..
Pure alphanumeric.. no apostrophe or any other odd character.

2.0 Hub, or not 2.0 Hub?

Similar Messages

Maybe you are looking for