2.0 issues, next version?

On purpose, until now I have NO apps loaded or running, it's a plain vanilla default original 8GB iPhone.
After upgrading my iPhone to 2.0, I found the following main issues;
1) iPhone
1.1 Battery life is much shorter, perhaps 2 days at the most instead of the previous 4 to 7 days on normal usage
1.2 Having almost the same number of contacts than before the upgrade (about 1750), the iPhone becomes much slower than before when starting the Phone application, looking for names, scrolling, etc.. It seems worst after a few hours of usage or when using EDGE instead of Wi-Fi. Slow behavior doesn't seem to follow a pattern or have a repetitive and demonstrable reason that triggers it, looking almost as random
1.3 Behavior of Maps varies pending on either EDGE or Wi-Fi, turning it specially slow/random on EDGE
1.4 Browsing while switching cells on EDGE is now much slower than before the upgrade
2) iTunes 7.7 (7.7.0.43)
2.1 Takes more time to launch after plugging the iPhone
2.2 Sync requires much more time than with previous version
2.3 Changing some settings on Preferences seems not well documented
Questions,
a) There is a workaround about battery life on 2.0?
b) It is expected a new software version from Apple (say 2.1?) to fix above issues -and other issues that you might have-? If yes, when?
c) The upgrade process was problematic on July 11, almost 9 hours without phone service. Will Apple or AT&T compensate for the problems they had it in some way?

Welcome to the world of every iPhone owner with 2.0. First generation or new 3G, makes no difference, we're all having similar problems. I can't help you much on your speed issues, but I can suggest a few things to help conserve battery life.
--Go into settings, then general, and turn off "Location Services." That eats a LOT of power.
--The other is email notification. In settings, go into "fetch new data." The default for that is to have push turned on, but if you turn that OFF, it will help your battery some. Also, under the fetch tab, if you set it to fetch at a greater interval that will also help (every hour instead of every 15 minutes, or better yet, manual)
--If you have bluetooth turned on but don't use it all the time, turning that off and only having it on when you're using it will also help. In general, the more stuff you have turned on, the more battery it will drain.
It sounds like you probably didn't have much unnecessary stuff turned on to begin with, but the first two things in particular will help (they are set ON by default with 2.0), and it's snot a bad idea to check out other things as well, even if you had them set to off before. 2.0 set many things back to default, so it's wise to investigate those things again.
Hope that helps.
P.S.-- We're all hoping that a 2.0.1 (bug fixes) will be out VERY soon to remedy some of the problems.

Similar Messages

How can I assign a period (instead of B) in Keynote for blank screen so I can use a Logitech R800 presenter? An option in next version?

I have recently bought a Logitech R800 presenter which works very well with Keynote on a MacBook Pro. The start/stop presentation key does not work but that can be easily fixed by assigning F5 to "Start presentation" for Keynote in the keyboard system preferences. The remaining issue is that the blank screen button sends a period (".") which works as a prompt for a blank screen in PowerPoint, but in Keynote it causes the slideshow to end. Keynote uses the letter "B" for blank screen.
How can I assign a period (instead of B) in Keynote for blank screen? Some sort of work around would be very useful as I often use blank screen in my presentations and much prefer Keynote to PowerPoint.
Perhaps it will be an option in next version of Keynote?
Thanks

As far as I know you can not change these keystrokes without changing the Program files. I am sure it is possible there, but I have no idea where to even start to tell you where to find it.
Your best bet it to go to the Keynote Menu>Provide Keynote Feedback and let Apple know you would like the option to change them.

A big wish for next version iPad - usb external hard drive connection

Can we ask that Apple consider putting a USB connection on the next version of iPad for those who want to use an external hard drive for storing images? When traveling some of us have too many images for the iPad storage and want to archive the RAW versions as well as see what we shot. This USB addition would be perfect for using for this and other applications. It would make the iPad perfect.

Ok, the idea for my request is I teach study abroad classes in photography. We do on the road critiques of the work. If the students stored all their images on those portable hard drives like the wolverine that would allow them to download onto them, they could just show them on the ipad, a much cheaper solution than the air that I would bring along. It's not about storage really when the images are not my own, but I would not store them there anyway like I don't store them on my macbook pro or my desktop but on archive external hard drives. When you shoot over 2000 raw and jpg images on one of these trips, you have to use external hard drives. The Air is gorgeous but I can get 2 ipads for the price of one air at the lower end. I am just really trying to find a way for the students not to have to bring so much equipment along. We have a trip planned to India in another year with them. Money will be an issue for them. I have taught university level photography for 36 years. I know about processing and we use lightroom for our classes. I really did not want to give the whole story just ask for the usb connector so we could see images from hard drives. That's all.

Hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date

hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date

Hi,
How is everything going? Have you checked this issue from OWA? If so, please let me know the result.
In adition, please also try to use the following powershell commands to check if the assistant has right permissions:
Get-MailboxFolderPermission -Identity
CEO’s email address:\Calendar -User assistant’s email address
Also check with:
Get-Mailbox -Identity CEO’s mailbox
| fl *GrantSendOnBehalfTo
Please let me know the result.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

The BlackBerry Pearl 8230 smartphone is the next version of the flip form factor BlackBerry smartphone.

Product Overview
The BlackBerry® Pearl™ 8230 smartphone is the next version of the flip form factor BlackBerry smartphone.
Features
·         CDMA2000® 1x EVDO Rev 0 (800/1900 MHz bands)
·         Built-in GPS
·         SureType® input method
·         Bluetooth® technology
·         2.0 megapixel camera with flash
·         Speakerphone and voice dialing
Smartphone Support
The BTSC provides technical support documentation, including product guides and manuals, to allow BlackBerry smartphone users to troubleshoot various issues on their own. Documentation for troubleshooting issues with the BlackBerry 8230 smartphone can be found at www.blackberry.com/btsc:
Search term: BlackBerry 8230 smartphone
Advanced Search: Additional search options are available by clicking the Advanced Search link below the search bar.
Frequently Asked Questions
KB15466 - Information about BlackBerry Device Software 4.6 Features and Enhancements
KB16018 – Information about the Instant Messaging folder on the BlackBerry smartphone
KB16012 – Information about the Micro-USB and Mini-USB ports on BlackBerry smartphones
KB16462 – Information about the conference call feature
RSS feeds: Sign up to get custom notifications for updated support resources.
Message Edited by Beholder on 02-27-2009 02:09 PM
Want to learn how to use your BlackBerry® smartphone? Visit youtube.com/blackberry to help you get the most out of your BlackBerry smartphone!
Do you have questions about your BlackBerry smartphone?
Go to mobile.blackberry.com on your BlackBerry smartphone to enter your question and get instant answers!

Good luck with that...I'm trying to do the same thing.
I work for AT&T Customer Care/Tech Support and there's no way in hell I would recomend the 8220 to any customer unless RIM will actually start doing some customer service. Ive even recomended to AT&T never to support this device until RIM solves this OBVIOUS device issue.
I've even offered to RIM that I am willing to pay some for an upgrade - or a downgrade to a lesser Blackberry - I don't care which, I just want a Blackberry that actually works!
I don't think RIM will do anything untill forced to - ie. if someone needs to call 911 on an 8220 and it shuts off and someone ends up dying as a result. The court case would be LOVELY to see... Would be nice to see a class-action-lawsuit over this issue as well...
If RIM would actually give us an option of replacing this obvious lemon of a phone, maybe, just MAYBE we wouldnt be as upset and would remain loyal customers/users - Just sayin...

Will 2D objects in java.awt.geom.* be Serializable in next version of Java?

I am pretty frustrated about having to write my own Serializable classes. I'm not sure if this is the right place to ask, but will the next version of Java supports Serializable 2D objects?
Further, I was trying to write my own class to extend java.awt.geom.GeneralPath to become Serializable, but it's declared "final". What should I do? (I had no problems with Rectangle2D.Double, Line2D.Double, etc.)
Any help is greatly appreciated.
Selwyn

Your code for serializing the state of the General path forgets two things:
1. the winding rule
2. the segments types!
You could use a vector, but I just directly wrote to the file:
private void writeObject(ObjectOutputStream oos) throws IOException
{     out.defaultWriteObject();
     //write state of transient GeneralPath _gp;
     out.writeInt(_gp.getWindingRule());
     float[] coord = new float[6];
     PathIterator i = _gp.getPathIterator(null);
     while(!i.isDone())
     {     int seg = i.currentSegment(coords);
          writeInt(seg);
          //switch on seg, writing correct # of floats from coords
          i.next();
     out.writeInt(-1);     //sentinel for end-of-data: SEG_LINETO etc are [0,4]
private void readObject(ObjectInputStream in)
throws IOException, ClassNotFoundException
{     in.defaultReadObject();
     int rule = in.readInt();
     _gp = new GeneralPath(rule);
     //etc...
}3. I'm just winging this code -- haven't tested it
--Nax

Performance issues with version enable partitioned tables?

Hi all,
Are there any known performance issues with version enable partitioned tables?
Ive been doing some performance testes with a large version enable partitioned table and it seems that OCB optimiser is choosing very expensive plans during merge operations.
Tanks in advance,
Vitor
Example:
     Object Name     Rows     Bytes     Cost     Object Node     In/Out     PStart     PStop
UPDATE STATEMENT Optimizer Mode=CHOOSE          1          249
UPDATE     SIG.SIG_QUA_IMG_LT
NESTED LOOPS SEMI          1     266     249
PARTITION RANGE ALL                                   1     9
TABLE ACCESS FULL     SIG.SIG_QUA_IMG_LT     1     259     2               1     9
VIEW     SYS.VW_NSO_1     1     7     247
NESTED LOOPS          1     739     247
NESTED LOOPS          1     677     247
NESTED LOOPS          1     412     246
NESTED LOOPS          1     114     244
INDEX RANGE SCAN     WMSYS.MODIFIED_TABLES_PK     1     62     2
INDEX RANGE SCAN     SIG.QIM_PK     1     52     243
TABLE ACCESS BY GLOBAL INDEX ROWID     SIG.SIG_QUA_IMG_LT     1     298     2               ROWID     ROW L
INDEX RANGE SCAN     SIG.SIG_QUA_IMG_PKI$     1          1
INDEX RANGE SCAN     WMSYS.WM$NEXTVER_TABLE_NV_INDX     1     265     1
INDEX UNIQUE SCAN     WMSYS.MODIFIED_TABLES_PK     1     62
/* Formatted on 2004/04/19 18:57 (Formatter Plus v4.8.0) */
UPDATE /*+ USE_NL(Z1) ROWID(Z1) */sig.sig_qua_img_lt z1
SET z1.nextver =
SYS.ltutil.subsversion
(z1.nextver,
SYS.ltutil.getcontainedverinrange (z1.nextver,
'SIG.SIG_QUA_IMG',
'NpCyPCX3dkOAHSuBMjGioQ==',
4574,
4575
4574
WHERE z1.ROWID IN (
(SELECT /*+ ORDERED USE_NL(T1) USE_NL(T2) USE_NL(J2) USE_NL(J3)
INDEX(T1 QIM_PK) INDEX(T2 SIG_QUA_IMG_PKI$)
INDEX(J2 WM$NEXTVER_TABLE_NV_INDX) INDEX(J3 MODIFIED_TABLES_PK) */
t2.ROWID
FROM (SELECT /*+ INDEX(WM$MODIFIED_TABLES MODIFIED_TABLES_PK) */
UNIQUE VERSION
FROM wmsys.wm$modified_tables
WHERE table_name = 'SIG.SIG_QUA_IMG'
AND workspace = 'NpCyPCX3dkOAHSuBMjGioQ=='
AND VERSION > 4574
AND VERSION <= 4575) j1,
sig.sig_qua_img_lt t1,
sig.sig_qua_img_lt t2,
wmsys.wm$nextver_table j2,
(SELECT /*+ INDEX(WM$MODIFIED_TABLES MODIFIED_TABLES_PK) */
UNIQUE VERSION
FROM wmsys.wm$modified_tables
WHERE table_name = 'SIG.SIG_QUA_IMG'
AND workspace = 'NpCyPCX3dkOAHSuBMjGioQ=='
AND VERSION > 4574
AND VERSION <= 4575) j3
WHERE t1.VERSION = j1.VERSION
AND t1.ima_id = t2.ima_id
AND t1.qim_inf_esq_x_tile = t2.qim_inf_esq_x_tile
AND t1.qim_inf_esq_y_tile = t2.qim_inf_esq_y_tile
AND t2.nextver != '-1'
AND t2.nextver = j2.next_vers
AND j2.VERSION = j3.VERSION))

Hello Vitor,
There are currently no known issues with version enabled tables that are partitioned. The merge operation may need to access all of the partitions of a table depending on the data that needs to be moved/copied from the child to the parent. This is the reason for the 'Partition Range All' step in the plan that you provided. The majority of the remaining steps are due to the hints that have been added, since this plan has provided the best performance for us in the past for this particular statement. If this is not the case for you, and you feel that another plan would yield better performance, then please let me know and I will take a look at it.
One suggestion would be to make sure that the table was been recently analyzed so that the optimizer has the most current data about the table.
Performance issues are very hard to fix without a reproducible test case, so it may be advisable to file a TAR if you continue to have significant performance issues with the mergeWorkspace operation.
Thank You,
Ben

The Next Version of Premiere Pro CC - Warp Stabilizer

With the recent post of what's coming in the next version of PPro CC, I was sad to see no mention of Warp Stabilizer. As amazing of an effect as it is, it needs a bit of help. I know there are improvements and fixes that probably weren't mentioned in the post so I'm still holding out hope. We use Warp Stabilizer more than anyone I know. Several hundred times per week. Yes, per week, no exaggeration. Over the last few years, we've built an entire style of shooting around the strengths of this awesome effect that emulates the use of a slider, steadicam and crane all without having to have them. So we've become really familiar with its PROS and CONS.
Here is a short list of SEVEN things that should be addressed with regards to warp stabilizer within Premiere Pro CC to maximize its effectiveness (and yes we did submit multiple Feature Requests for these so far to no avail):
FIrst and foremost and by far MOST IMPORTANT to us - Allow users to create a CUSTOM PRESET with any altered settings that will engage (or begin Analyzing/Stabilizing) automatically when added to a clip!! This is huge. If you double click on Warp Stabilizer with a clip selected, it is applied to that clip and begins the process of stabilizing that clip. However, the vast majority of the time we need to alter the settings of the effect. If we create a custom preset, that's all fine and good, but when we add that to a clip, it does NOT begin stabilizing. Instead you have to manually go into the Effect Controls for each clip and select ANALYZE. Huge waste of time when adding this effect to hundreds of clips. PLEASE FIX!
BUG when saving projects!!! - If this is not a bug, it needs to be fixed because it's awful. - If you have more than one sequence with multiple warp stabilizations added and GPU ACCELERATION IS ENABLED, then after you SAVE a project (or if it auto-saves) when you toggle between the two sequences you are hit with a delay or freeze while the render bar goes from Yellow to Red...and finally back to yellow again. No work can be done during this delay/freeze. The more stabilized clips, the longer the delay. For us, on our larger projects this delay is sometimes 30 seconds to almost a full minute! Once it turns back to yellow, you can toggle between sequences without the delay...but as soon as it saves again...and you toggle between sequences, the delay hits again. If this is a bug, or somehow a result of Premiere Pro's way of CACHING projects after it's saved, then I sincerely hope it's fixed asap. It's awful!
The third is more of a feature request than a fix - Add the ability to set the maximum scale to work WITH the smoothness control so that if you never want your clips to scale more than say 105%, you can set that and have Warp Stabilizer stabilize the clip and adjust the "smoothness" percentage from the default "50%" down to whatever it needs to be in order for that clip to be fully stabilized and scaled to no more than 105%. Correct me if I'm wrong, but this is not possible currently. Right now we have to manually adjust each clip if it is initially scaled too much by dropping down the Smoothness %.
Another great feature would be the ability to manually keyframe the scaling so that if you have a longer clip that starts fairly steady, then needs to be smoothed out a bit more in the middle, before it ends relatively steady again, you can slowly and seamlessly ramp up the stabilization/scaling so that the whole clip doesn't have to be scaled to make up for the misgivings of one portion of the clip.
Minor bug - sometimes when you have extended the length of a clip, the clip needs to be re-analyzed again. However, the "analyze" button is often greyed out. You need to click away from the clip and then click on the clip again to make that button appear again. Nothing big, but still, a small bug.
After Effects Warp Stablizer VFX feature carried over - It would be nice to carry over to Premiere the ability to isolate what in frame is supposed to be stable (sometimes someone nodding their head can trick the effect into thinking that it's the camera shaking). Great to have it in AE, but would be nice to carry over to Premiere Pro CC.
Finally, I've always believed that no matter how cool "Subspace Warp" sounds, it is not as effective as "Position, Scale & Rotation". This SHOULD be the deafult "method" within the Warp's settings. I'd say 95% of the thousands and thousands of clips we've stabilized we ended up switching the "Method" within the settings to "Position, Scale & Rotation" because it either scaled the shot less or created less "wobble" in the resulting stabilized clip. I know everyone shoots differently, and sometimes Subspace Warp is the way to go, but we have stabilized all sorts of shots with great success by simply switching this setting. Granted...if #1 on this list was taken care of we could then easily have this set as our default setting.
Hopefully this list either reaches someone within Adobe that can do something about them or at the very least inspires others to write feature requests and bug fixes as we have. Even resolving #1, #2 and #3 would be HUGE and would save our editors probably 10 hours per week. It's an awesome effect, far better than "smoothcam" on FCP7, it just needs a little love.

CoSA_DaveS wrote:
All good points, thanks for posting.
For #1, you can make this work in AE at least. This tip is from my colleague DanW:
If you make a preset by only selecting the values you change (and not a preset for the whole effect) then it will auto-analyze on apply.
Simplest way: apply WS, make edits, hit UU to reveal changed params, select all "i-beams" in the Timeline, drag them to the Effects & Presets panel.
For #4, you can get manual control over the scaling by setting Framing to Stabilize Only, and then keyframe Additional Scale to taste. At one point we were going to try to automate this, but found automatic scaling to be very subjective as to the best way to handle it.
For #6, Warp Stabilizer will not track areas with zero alpha channel. So you can pre-mask the input to reveal just the parts you want to stabilize. Do this inside a nested sequence, with Warp Stabilizer applied downstream (in the outer sequence). The just-announced masking & tracking capabilities of the next CC version should be handy for this.
-DaveS, Adobe Dynamic Media, Advanced Product Development
Hi DaveS!
Great to hear that you guys are taking a look at this list. Hope it helps make it better. #1, #2, and #3 are by far the biggest time killers for us so hopefully they'll be able to be fixed/resolved within Premiere soon.
Regarding your note about #1: Allowing this functionality within Premiere specifically would be very helpful. Would it be possible to eventually allow Premiere to auto-analyze when a saved custom preset is applied to a clip? I tried it in AE as you suggested, and couldn't figure it out. But realistically we use Warp Stabilizer on so many clips that round tripping literally hundreds of short clips to AE would be just as time consuming as going into the settings in premiere for each one and adjusting the parameters. We usually adjust the method and then adjust the smoothness scale so that it doesn't "Auto-Scale" more than 104%. That's where our #3 suggestion would help. I didn't quite understand how to make a preset of specific changed values. I tried, but couldn't follow DanW's suggestion. Granted, I'm not that great with AE. I really just use it for the Warp VFX's ability to isolate what in frame is stabilized (hope that comes to Premiere one day) and that's about it. And I really only have to do that a couple times per project. Anyway, I'm sure I'm doing DanW's suggestions wrong but regardless, I'm not sure it would save us much time when we have several hundred individual little clips that would all need to be sent to AE. Any hope for adding this auto-analyze functionality (hopefully allowing a custom preset on the whole effect and all it's adjusted parameters) in Premiere CC?
Regarding your note about #4: That is a valid work around for now. I appreciate that thought. Thanks!
Regarding your note about #6: I think I half understand what you described. I'd have to try it. Although, as I said before, the AE way of doing it is ideal and I just hoped that ability to show the tracking points and delete them over time would come to Premiere CC one day. When the next CC comes out I'd love to try this masking method although I think I'll have to claify exactly what you want me to do just to be safe. Is there no hope to port this added functionality that's in AE's Warp VFX over to Premiere's Warp Stabilizer? Again, not the end of the world for us. I'd rather #1, #2 and #3 be addressed inside Premiere Pro CC for now.
Fixing the first 3 on this list would be HUGE time saver for us.
Thanks again DaveS to you and the rest of the Adobe team for looking into this list. Very much appreciated.

Message to RIM - wish list for next version

Hi
Just some thoughts based on a couple of days of use of a playbook that my IT folks lent me.
Firstly, hopefully RIM will realize that the only way this will take off is if Enterprise users really buy into it but the device lacks in certain areas if it is to be a WorkBook instead of a PlayBook (which other tablets do a better job at) as follows:
- no way to adjust font size or zoom in the Messages in the BlackBerry bridge - if the higher ups in corporate can't read their messages, they won't buy.
- even though typing e-mails show you spelling errors w a red underline - there is no way to correct, while in your BBerry, you can call up spelling correction options. (The same for the other bridge apps, like memos etc, as well).
- very difficult to edit messages, the touch screen is not sensitive enough so its difficult to place the cursor to exactly to the point you need it in text you have already typed. Suggest an optical track ball (similar to the ones in the 9700s) or a stylus be incorporated into the next version.
- even if you are able to get the cursor to the spot you want it in a draft e-mail/memos you can't highlight to cut or copy text to other parts of the e-mail/memo draft.
- can't view attachments that are part of the calendar entries - but you can on the BBerry itself.
Think that's it after 2 days of using. Needless to say, am disappointed as the PlayBook doesn't increase productivity and is lacking in key areas that are part of what makes BBerry a strong product. I wouldn't buy with my personal funds and think the corporate will not roll out as aggressively as it could the cost/benefit is currently not there.
Let's see what future software/hardware upgrades bring.
Cheers to all.

Hi 8400Help, I had compiled a list of suggestions in an earlier thread please check it out here: http://supportforums.blackberry.com/t5/BlackBerry-PlayBook/Future-Things-We-Want-Rim-To-Fix-On-The-P...

What's new in the next version of Premiere Pro? Check it out!

Here's some of what's coming up in the next version of Premiere Pro and AE. Can't want to play with this!
http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/products/creativecloud/cc/pd fs/nab2014-reveal-whats-new-for-pre-release-20140321.pdf?sdid=KLBWR
Preview videos here: http://tv.adobe.com/watch/adobe-at-nab-2014/whats-new-in-premiere-pro-cc-nab-2014/
Some awesome new stuff coming our way!
Fingers crossed they also fixed Multicam editing (i.e. intelligent separate window UI). I'll find out soon enough at NAB.

Lots of great new things coming our way!
However its seems that many basic improvements are still missing. Here's the list of items I'll be going over with the Adobe reps at NAB. See something missing in my list? Feel free to share!
Disappearing markers when track below a certain height (http://forums.adobe.com/message/6205015#6205015)
all effects on/off toggle, especially to disable transitions while working with keyframes in the ECW (http://forums.adobe.com/message/6210552#6210552)
'Source Clip: Next/Previous' not working in full screen mode (http://forums.adobe.com/message/6140378#6140378)
Effect presets too easy to rename by mistake
Auto color coding of clips with Warp stabilizer applied (http://forums.adobe.com/message/5946227#5946227)
Project window tab name: just 'Project', nothing else (http://forums.adobe.com/message/5935706#5935706)
Multicam angles in separate, full screen viewable window (http://forums.adobe.com/message/5934039#5934039 and http://forums.adobe.com/message/5931933#5931933)
Pasting at cursor position instead of lowest active track (http://forums.adobe.com/message/5934219#5934219)
Remove gaps function (http://forums.adobe.com/message/5946226#5946226)
Intelligent tooltips that report info on individual clip or selection, depending on what's selected (http://forums.adobe.com/message/5934215#5934215)
Constant rasterization of titles and Illustrator files (http://forums.adobe.com/message/5934211#5934211)
Multiple Effects windows (http://forums.adobe.com/message/5929261#5929261)
Default to first clip loaded in Source Monitor (http://forums.adobe.com/message/5909239#5909239)
Sticky solo settings in Audio Meters window (http://forums.adobe.com/message/5908879#5908879)
Smooth fades (http://forums.adobe.com/message/5901648#5901648)
Prevent off screen changes (http://forums.adobe.com/message/5792648#5792648)
Keep focus on Timeline when tilde toggling out of full screen mode (http://forums.adobe.com/message/5777794#5777794)
Intelligent 'Nudge Clip Selection Down/Up' (http://forums.adobe.com/thread/1267353?start=0&tstart=0)
Keyboard shortcuts to apply transitions to CTI only (http://forums.adobe.com/message/5542185#5542185 and http://forums.adobe.com/message/5544651#5544651)
PP windows wirelessly sent to tablet/smartphone (http://forums.adobe.com/message/5538217#5538217
Drag/drop modified clips from Timeline to Project window (http://forums.adobe.com/message/5300065#5300065)
Shift-toggle to restrict movement to up/down or left/right in Program monitor (http://forums.adobe.com/message/5293341#5293341)
Smart Bins that auto collect certain asset types, such as titles
Ability to move entire motion path as in AE (http://forums.adobe.com/message/5292523#5292523)
Non-slipping keyframes in ECW (http://forums.adobe.com/message/5284322#5284322)
Aesthetically correct rounded/clipped corners in Titler
'Zoom to Keyframes' shortcut in ECW (http://forums.adobe.com/message/5192692#5192692)
Consistently intelligent font lists across all CC programs (http://forums.adobe.com/message/4955178#4955178)
Offscreen media overwrite warnings when moving a clip would overwrite content outside the viewable bounds of the Timeline (this would be an NLE first afaik)

Request for feature of Next Version of Indesign Middle Eastern Version

For Adobe Team,
Request for Feature of Next Version of Indesign Middle Eastern Version
About Character and Paragraph Style Sheet in Next Version of Adobe Indesign Middle Eastern Version
Make an option for Latin Font style and Unicode/arabic font style.
We have work in both language English and Arabic or Urdu with same document or same paragraph.
For Guidence see this image of InPage Urdu Programme.
Thanks
Safwan

Ooh, InPage! I'm so glad that I don't have to work in InPage anymore.
However, that feature that you're looking for was actually a good one. It won't do you any good to ask for it here, though; you want to go straight to WinSoft. They make the ME edition, not Adobe.
However: World Tools suite from in-tools.com has the feature "Apply Latin Character Style" which does what you want, more or less. The main paragraph style would be an Urdu RTL style, unlike your InPage example. Unfortunately, going in "the other direction" World Tools only has "apply Hebrew character style." It's still worth a look for you, I think.

What's coming in the next version of Premiere Pro CC

Hi all,
Here's a blog post by Al Mooney telling you about what's coming in the next version of Premiere Pro.
http://blogs.adobe.com/premierepro/2014/04/thenextpremiereproccrelease.html
tclark also posted this link a bit earlier about all the CC video applications: http://blogs.adobe.com/creativecloud/revealing-the-next-wave-of-innovation-in-pro-video-ap ps/?sdid=KLCUB&PID=3515632
Let me know if you have questions.
Thanks,
Kevin

Congratulations on a significant amount of development.
Not sure yet which ones I would consider "best for me".
Maybe Masking , definitely SG Scope, Master Clip Function.......
http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/products/creativecloud/cc/pd fs/nab2014-reveal-whats-new-for-pre-release-20140321.pdf?sdid=KLBWR

N95-1 ,WHEN WILL THE NEXT VERSION AFTER THE V21.0....

If u all hav upgrade yr N95-1 to V21.0.016 & format yr Nokia 1GB micro sd card & start to use it fr fresh download of files ( without restore setting, bookmark & user files) , that is fine , phone system is fast & good...but...but if u hav bac up a copy of phone user files, setting & book mark & after upgrade ,u restore u will suffering system crash with yr restored data..., phone seem like forever cannot boot up & very very slow response ...now i am the victim , every time i off my phone, i hav to take out memory card only can start my N95-1 smoothly, then only i put in by way of "hotswap" into the memory card into the phone....this is crazy job !!! but i really don want to lose all my valuable & paid money to buy the mp3, mv, themes, wallpaper & other stuffs if i do not retore them....NOKIA, DON U NOTICE THIS BIG PROBLEM ? I URGE NOKIA TO COME OUT NEXT VERSION TO SOLVE OUT THIS

I also have an N95-1 with firmware v21.0.016, and the 8GB card in it has about 3GB of stuff on it.
Yes, it did take a while to boot and become responsive the first time I powered it up after the upgrade, but that was a once-off. Let it do its work and things will be okay.
Alternatively, you might have a faulty memory card.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Can the lumia 525 be updated to next version of wi...

Can the lumia 525 be updated to next version of windows (probably 8.1) ? When the phone will be launched in india?
Solved!
Go to Solution.

As that software update hasn't even been officially announced yet it's impossible to say with any certainty. It is expected it will be compatible with all current WP8 devices but only Microsoft can say that for sure.
You will need to contact Nokia India directly or retailers in India to find out when they expect to be selling it.

Sneak peek: the next version of DW

Alejandro Guttierez shows off one of the main new features in the next version of Dreamweaver.
http://blogs.adobe.com/dreamweaver/2013/04/nextgendreamweaver.html
By the way, if you plan to attend Adobe MAX, I am presenting a 90-minute hands-on lab diving into the detail of how to use the new CSS Designer panel. The lab will be presented twice at 2.45pm on Monday, 6 May, and at 11am on Wednesday, 8 May.
The blog post also confirms what I have suspected for a long time: server behaviors will be removed from the next version. They'll still be available as an extension, so existing users aren't left in the lurch. But the message is clear: start thinking of alternatives.

David_Powers wrote:
osgood_ wrote:
Just removing the server behaviours without replacing them with something more up-to-date its NOT very forward thinking of Adobe. The server behaviours IS or WAS a massive reason to use Dreamweaver.
I have no idea whether Adobe plans to replace server behaviors with something more up to date. What I do know is that the forum dedicated to developing server-side applications in Dreamweaver has become less and less active in the past year or so. Maybe that's because people who don't want to write their own code rely on the more sophisticated offerings of extension developers, such as WebAssist and DMX Zone, who have their own forums. However, if I used those extensions my main concern would be that, as far as I know, they're dependent on the deprecated mysql functions.
Working with a database doesn't necessarily involve writing a lot of code. There are several powerful PHP frameworks, all of them free, that do all the hard lifting for you. When I wrote Adobe Dreamweaver CS5 with PHP: Training from the Source, only one chapter was devoted to using server behaviors. The book was published by Adobe Press, and with Adobe's full knowledge and approval, it concentrated on using Zend Framework 1. It also showed how to use WordPress in Dreamweaver. I think the rise of WordPress played a similar role in the fate of server behaviors as jQuery played in the decision to cease investing in Spry.
If WordPress is too much like a sledgehammer, an alternative is Perch. It's not free, and it requires a separate licence for each website, but it has an excellent reputation. It's developed and maintained by Drew McLellan and his wife, Rachel Andrew, two very talented web developers (they're Brits, too). I don't have any affiliation with them. I've just heard lots of good things about them and Perch.
Sure David I hear what you're saying BUT Wordpress is too clumsy for the client to use simply. It's far too easy to add a myriad of extentions which could break the website design. Every time Wordpress is released you need to upgrade with it. It has security risks as far as I know. It's certainly not soemthing that I would touch after having given it a run out, several times. The whole package is really messy in my view and you're less in control of the process. Coding is King.
Yes, Perch is much better and simpler but is still quite restrictive, I've used that too. I've just finished a website which as far as I'm concerned required a bespoke CMS. Not only that if you write the code, or most of it, you have full control and knowledge in the event of something which stops working......at least I have a chance of sorting out the problem them. Totally relying on 3rd party products or extentions you have zero chance UNLESS you're some kind of code wizard which you arent going to be if youre using Wordpress or Perch.
I think the reason why there is less and less activity in the forum you mentioned is that many have moved away from using the DW server behaviours (php is the most popular server language by far) BUT Adobe have sat on their backside and missed the boat prefering to concentrate on rather lame updates.
I'm sure your right about WebAssist and DMX Zone whose extention MUST be compatibale with the Dreamweaver ones. I guess its over to them to come up with something that replaces the ones in Adobe as they themselves are highly unlikley to do it themselves.
For me its a question of I have now got to go and learn some of the new sqli which on the outset seems a lot more streamlined than the functional crap DW was writting anyway.

2.0 issues, next version?

Similar Messages

Maybe you are looking for