2.0 update send phone to recovery mode

unable to recovery phone... unknown error 13

Got i got the iphone to recovery finally...but know it wouldn't let me update to 2.0

Similar Messages

  • Interrupted update put phone in recovery mode.

    An interrupted update to iOS 7.1.1 put phone in recovery mode.  The phone told me to connect to iTunes and when I did it only gave me the option of restoring the phone.  The problem is though, that the phone hadn't been backed up in awhile and not at all to the computer I had to connect it to.  So is there a way I can reboot without restoring the iPhone?

    You can restore the iPhone from an iCloud backup or from an iTunes backup once you're back at your computer.
    I know that doesn't help too much, but it is an option.
    ~Lyssa

  • HT201442 Downloaded iphone 4 ios7 update put phone in recovery mode? what to do? don't want to restore afraid photos didn't back up!

    Help!!!
    I recently updated my itunes 11.1 - successfully
    Went to update my iphone4 to the ios7 and it put my phone in recovery mode!!!
      concerns:
    1. i'm afraid to restore iphone (not sure if i backed up recent family photos and contacts)
    2. checked online for help and only found this http://answers.yahoo.com/question/index?qid=20130918173948AAktqtt
    3. is there anything to help restore phone before it was put in recovery mode?
    HELP!!!

    ANYONE THAT NEEDS TO SAFELY RETURN BACK FROM RECOVERY MODE:
    follow this:
    http://www.pcadvisor.co.uk/how-to/apple/3448684/how-get-iphone-out-of-recovery-m ode/
    THEN START UPDATE OVER

  • TS2529 iOS update throws phone into recovery mode - HELP

    The current iOS update seems to have thrown the phone into recovery mode now requiring restoration through iTunes. Of course I don't have photo stream on and fear losing all my photos. Any way around this?

    Reset, hold both the home and power buttons until the iPhone begins to restart. If this works great. If not you may have to Restore the iPhone to get it working again. If you decide to do this you may even have to use DFU Mode to Restore. Here are the steps for DFU. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes.

  • Every iPhone update fails and send phone into recovery mode

    I'm getting extremely frustrated, and I know I'm not the only one after searching Google, that every time an update is released for the iPhone mine fails and goes into recovery mode then works the second time. It has happened on every release of iPhone software since owning a 3G and then the 3GS. My 2G never had the problem. Is there a cause and solution to the problem?

    I thought mine was sorted on the second attempt this time but it wasn't. It took 6 attempts!
    To get it working finally I done the following:
    Restarted the computer
    Made sure iTunes was updated to version 9
    Located the 3.1 install file and delete it - Located in users/yourusername/library/itunes/iphonesoftwareupdates on the mac - not sure on a pc
    Reopen iTunes and complete the restore and install. It had to redownload the update but worked this time round.
    Message was edited by: James G4

  • After updating ios my phone in recovery mode how to start

    AFTER UPDATING IOS SCREEN APPEARING ONLY CHARGER AND I TUNES PHONE IN RECOVERY MODE HOW TO START

    Mine cant finish this proces and restart again.
    After updating to 6. ???
    The first problem was, even with sufficient power a restart of the iphone.
    So I replaced the battery 4 a new one and now this problem.
    Reinstalling to fabrics dosnt complete.

  • HT201263 i forget my passcode.now when i put my phone into recovery mode it connects to i phone software update server and sftware starts download but after much time of download error=-39 occurs

    now when i put my phone into recovery mode it connects to i phone software update server and sftware starts download but after much time of download error=-39 occurs

    my itune keep showing message that i tune is downloading software for my phone. but downloading for several minutes it displays message that i tune cannot connect to my phone because it is locked with a passcode. first entre the pass code.
    on the other hand phone is started with a message on screen phone is disabled.

  • I updated my iPhone to iOS 8.0.2 and when it put my phone in recovery mode. What can I do?

    I Recently updated my phone to the newest software iOS 8.0.2 and it put my phone in recovery mode. So I connected it to iTunes and restored it twice and my phone still says connect to iTunes.

    Are they not on the computer you have regularily been Syncing and Backing up to...
    See here  >  http://support.apple.com/kb/HT1386
    From Here  >  http://www.apple.com/support/iphone/syncing/

  • HT201210 my phone was unable to finish the latest update and gone into recovery mode. will only restore if i do a factory reset, but i dont wanna lose my photo/videos!!!

    my phone was unable to finish the latest update and gone into recovery mode. will only restore if i do a factory reset, but i dont wanna lose my photo/videos!!! how can i back up up before i restore it. im not able to acces my phone normaly, stuck in recovery or something.

    it seemed to have backed up everything just before the software update 6.1.4. so after the full restore i restored from backup and its all still there (mostly)
    what a relieve...thx

  • Phone in recovery mode?

    I just upgraded from the 1st gen to a 3gs 16g I came home to sync new to old, when i plugged in the old, i needed to update so i did it updated then said it was transfering, then when it got done instead of saying sync complete, it said phone in recovery mode, now on my screen i have a picture of a plug and the itunes symbol and the phone does NOTHING when i press the button..any ideas

    Which phone is in recovery mode - the "old" 1st gen iPhone or the 3GS? What happens when you plug it back into iTunes? If iTunes sees it in recovery mode, follow the prompts to restore the phone. If not:
    1. Be sure you have the latest iTunes, 9.1.1
    2. Start iTunes
    3. Plug phone into a USB port on the computer, not an external hub or keyboard port.
    4. Press both home and sleep/wake buttons until the Apple logo appears, then continue pressing the home button alone until iTunes sees the phone in recovery mode.
    5. Follow the prompts to restore.

  • IPhone 4; Have tried updating but stuck in recovery mode.

    Here it is,
    Just got my iPhone 4 and have tried to update it to the new iOS 5 software that has been released. I plugged it in, pushed update and restore and everything that your supposed to do normally.
    But now instead of working, it is now stuck in recovery mode and cannot seem to get it out of there! I have tried many methods but cannot seem to find one that actually works!
    Any help is greatly appreciated as I really want my phone up and running again!!!
    Cheers,
    Max.

    try to put your phone in recovery mode. plug into itunes and hold down the home button and top button until apple logo appears and then let go of the top button only. the phone should display plug into itunes.let go of the home button when this happens. disconnect iphone and plug it back in itunes should recognize it is in recovery mode. hit the restore button on summary page.

  • Update Sent iPhone into Recovery Mode

    A friend told me about the update so I connected my iPhone to my computer and chose "Update." I got an error that ended with my phone in "Recovery Mode." iTunes recognizes it as an iPhone in recovery mode and I choose "Restore" but what seems to be most of the way through the restore I get an error saying (direct quote) "The iPhone "iPhone" could not be restored. An unknown error occurred (6)." After I first had problems I updated iTunes, but that didn't help. I'm on hold with phone support. I've yet to talk to anyone.

    I also experienced the "recovery mode" issue. After distilling some of the recent posts here and related topics, here's what I found worked for me. (1) Delete iTunes 7.6 update, download and install iTunes 7.6 from Apple's website. (Good idea to back up your iTunes library just in case). (2) If you have tried several restores of the iPhone without success, navigate to //user/library and delete the several backup files there. (3) Reset your iPhone (simultaneously press home and power key until Apple logo appears). Turn iPhone off (press power key until screen blanks). (4) Plug in your iPhone and you'll hopefully see that the software and firmware is being restored. (This takes a while). After that, you'll see the message that your iPhone files are being restored, however you have them set in iTunes. One note -- though I'm not sure why, having your iPhone plugged directly into your machine's USB port rather than through a hub may prevent device polling from corrupting the iPhone restore process. This worked for me -- not sure if similar process would work on Windows boxes or not. After about an hour of messing with it, now have updated iPhone fully functional (again) with new features.

  • HT201413 what can i correctly configre my i phone 4s recovery mode to restore?

    I wants to configre my i phone 4s recovery mode from restore but isn't correct. Please help me.

    Hi, dre225. 
    Thank you for visiting Apple Support Communities. 
    If your device is in recovery mode, try processing forced recovery mode. 
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    If you are receiving an error message, here is the list of the most common error messages and steps to resolve these issues. 
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    Cheers,
    Jason H. 

  • HT201413 I have restored and updated my ipod from recovery mode however I still have the usb cord and itunes icon on the ipod when it is switched on. How can I get my ipod to work again?

    I have restored and updated my ipod from recovery mode, however I still have the usb cord and itunes icon on the ipod when it is switched on. How can I get my ipod to work again? I have updated and restored 5 times! When connected to itunes it only shows the summary page saying ipod in recovery mode.

    Fixed it!
    1. Made sure itunes software was up to date
    2. Pressed and held 'home' button and 'on-off' button at the same time for about 10 seconds till ipod reset (I hadn't done this step previously)
    3. Connected to itunes
    4. Pressed restore and update ipod
    Update successful and ipod taken out of recovery mode

  • Trying to install new upgrade to my iphone4 and it put my phone in recovery mode.  How do I get it out?

    Trying to install new upgrade to my iphone 4 and it put the phone in recovery mode.  How do I get it out?

    i have this problem too! have you fixed yours yet?

Maybe you are looking for

  • Color Printing on High Gloss Paper

    I'm using an HP Photosmart Premium  All in One (C309a). I am printing a camouflage pattern, with a lot of color on top of color, using high gloss transfer paper. The variations in color are getting lost on the high gloss although it prints out just f

  • How to use a Parameter while polling a table (DB Adapter)

    Hi BPM 10.1.2.02 my bpel process polls a table for changes. i need to trigger the process only for specific data. ex - i need to pickup data only which have a modified date of today (ie sysdate), how do i accomplish this ..the only 2 options im getti

  • SUS -  Purchase Order  - Rejection

    Hi,   I would like to reject a PO that came in through SRM -> R3->XI-> SUS.. When logged in as SUS user, I see PO in Purchase Orders --> New section . I have only 'Set Confirmed' button visible and active.. How do I reject a Purchase Order. When I go

  • Nested Tab Leader Style for Price List Issue

    Hello, I wanted set up a character style for a tab leader that makes the font weight light as opposed to the bold paragraph style. I tried two character styles, one as a tab leader, and one as a dotted underline and got different results. When I set

  • Silent Install for WebLogic

    Hi, I am trying to install Weblogic 8.1 in silent mode. I found a web page that talked about using a silent.xml file which I tried. But, I still can't get it to work. Does anyone have a silent.xml file for Weblogic 8.1 they can post here or e-mail at