2.0 upgrade APP_SESSION error

We are upgrading to 2.0. In order for the popups to work properly We added the APP_SESSION parameter when building the URL. Sample code: url = 'f?p=&APP_ID.:11:&APP_SESSION.::P12_CIVIL_DOCKET_ID:' + civil_docket_id + ':P11_CIVIL_DOCKET_ID:' + civil_docket_id;
Worked great in the development environment before upgrade and test environment after upgrade. However before production upgrade, logging in returns this error: ERR-1002 Unable to find item ID for item "APP_SESSION" in application "100". Has anyone encountered this before? Development has been upgraded to 2.0, So recreating this there is impossible.
Appreciate any help.
DJ

DJ - You don't say what version you are upgrading from. The problem probably has nothing to do with your popups. I think you are running your application in the same browser session in which you are already authenticated to the HTML DB Development Environment and you are logging into the application as a different username. See problems after your upgrade to 1.5 => ERR-1002
Scott

Similar Messages

  • MAIL: The upgrade failed - error occurred during upgrade. launching Mail Import assistant  to repair damaged index did not work

    After installing Yosemite, the Mail required an upgrade. the upgrade was completed but resulted in a message: The upgrade failed. error occurred during the upgrade, check continue to launch Mail Import Assistant.
    This resulted in an instruction: Your mail index has been damaged. To repair it quit mail. Mail will repair index next time you open mail.
    Following this instruction resulted in the same failure message being repeated continuously.
    How do I proceed to upgrade the Mail app.?

    If doing as the alert directs (relaunching Mail) has no effect, see below.
    The new version of Mail stores its database in a different format than the old one, so the database has to be converted before Mail can use it. Sometimes the conversion fails because the old database is corrupt. The easy way to recover is to discard the old database and start afresh. You can do that without losing any messages, provided that:
    ☞ All your incoming mail accounts are on an IMAP or Exchange server
    ☞ You store sent messages on the server
    ☞ You don't have any "On My Mac" mailboxes
    Most well-known independent mail services such as iCloud and Gmail are based on IMAP. On the other hand, ISP-hosted mail services almost always use POP. If your ISP is one of your mail service providers (or the only one), you probably can't use this procedure. Ask for further instructions in that case.
    If you know that the conditions above are satisfied, continue as follows.
    Quit Mail if it's running. Back up all data.
    Open the Library folder in your home folder by holding down the option key and selecting
              Go ▹ Library
    from the Finder menu bar. Inside it is a subfolder named "Mail." Move that folder to the Desktop. You're not moving the Mail application; you're moving a folder named "Mail."
    Open the Internet Accounts pane in System Preferences and recreate your mail accounts other than iCloud with the same settings as before. To recreate an iCloud mail account, all you have to do is open the iCloud preference pane and check the box marked Mail.
    Launch Mail. If all goes well, your mailboxes should be restored automatically. The messages will be downloaded from the servers, so it may take a long time if you have very large mailboxes. Some people have mailboxes in the gigabyte range, and that may be a problem if your bandwidth usage is metered.
    If the mailboxes are created successfully, you can delete the folder you moved to the Desktop. You may have to recreate your Mail rules, signatures, and custom stationery. If it's very important to you not to have to do all that, ask for instructions before deleting the folder.

  • I just upgraded to Yosemite. Iphoto is now broken.  Upon upgrade receiving error "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."

    I just upgraded to Yosemite. Iphoto is now broken.  Upon upgrade receiving error "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."

    Perform the following, stopping with the first one which works:
    1. Open the Mac App Store's Purchases tab. If you're prompted to accept iPhoto into your Apple ID, do so.
    2. Move it out of the Applications folder(it may need to be put into the Trash temporarily), and then see if you can download it for free from its individual product page.
    3. Click here and contact Apple.
    (116137)

  • Unable to install photoshop cs4 upgrade. getting error message

    unable to install photoshop cs4 upgrade. getting error message

    but the error message says that Apple Power PC apps no longer supported.
    You still need to contact the manufacturer.  You need to determine from them if they have drivers that support the OS that is currently installed on your comp or read the following KB Articles: 
    http://support.apple.com/kb/HT3669 Printer and scanner software available for download
    http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer 
    http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system 
    A scanner driver you may wish to consider:  VueScan Scanner Software 

  • For some reason I cannot uptade Modern Combat 4, every time I try upgrading an error message appears saying you cannot uptade since you do not own the major version of this software. I need to uptade to play online, any help would be appreciated.

    For some reason I cannot uptade Modern Combat 4, every time I try upgrading an error message appears saying you cannot uptade since you do not own the major version of this software. I need to uptade to play online, any help would be appreciated.

    See:
    iOS: Troubleshooting applications purchased from the App Store
    Contact the developer/go to their support site
    Restore from backup. See:
    iOS: How to back up
    Restore to factory settings/new iPod

  • Hello, When upgrading Iphone4 error-1.How to remove it? thank you

    Hello, When upgrading Iphone4 error-1.How to remove it?
    thank you

    This is a bad Hardware Error, most often means Baseband Problem. Maybe try to Restore Firmware with SIM Card removed. If you still have Warranty or AppleCare Coverage take iPhone to Apple for resolution.

  • Upgrading systemd Error getting authority

    Hmm, upgrading today  got me this
    pacman -Syu bind
    (12/41) upgrading systemd
    upgrading systemd Error getting authority: Error initializing authority: Error calling StartServiceByName for org.freedesktop.PolicyKit1: Timeout was reached (g-io-error-quark, 24)
    does this mean an install broke, or what..

    This post seems to be related to your question.
    https://bbs.archlinux.org/viewtopic.php?id=153610

  • Itunes won't open after upgrade/no error message

    I had an older version of ITunes that was working fine until I wanted to buy music that required an upgrade to 7.and the download seemed to go fine but after the installation,I was unable to launch/open the program or access my library.I've removed it once and reinstalled and still nothing.I'm totally frustrated.I've checked firewalls and everything else I can think of and wish now that I just had my old copy of Itunes back so I could at least copy CD's onto my IPOD. When I click on the Itunes icon, nothing happens. I've never gotten any type of error message. Any suggestions will be greatly appreciated.

    Jason,I used the troubleshooting link you gave and so far have 1.Fixed Digital Signing for Windows drivers.(didn't help) 2.Removing Itunes configuration files.
    In this one I was told to delete the SC info.sidb file (I didn't have one of these when I got to the folder where it was supposed to be)The thing I haven't done is the mscofig.instruction. I was saving it for last as it sounded like it could really make a lot of changes to my computer.The Itunes installation icon is still on my desktop so I clicked on it and there was a link that said it would repair missing or damaged files in the Itunes software. It didn't help either. I can click on Itunes all day long and it won't open.I can't access the library either. I am going to do the last step you suggested and uninstall my security software and see if that helps. I appreciate all the help Jason.

  • ERP6 upgrade, PREPARE error

    Hello!
    Have anyone seen this PREPARE error message before?
    During phase RUN_RSPTBFIL_PREP,  error message "2EETG011 Kein Upgrade aktiv".
    I can't find any SAP note about this specific problem. The source system is 4.6B, the target will be a non-unicode ERP6 SR3, the os/db is AIX53/ora102.
    //Fredrik
    root@serverX:/usr/sap/put/log:more RSPTBINI.LOG
    1 ETQ201XEntering upgrade-phase "RUN_RSPTBFIL_PREP" ("20080923124421")
    2 ETQ367 Connect variables are set for standard instance access
    4 ETQ399 System-nr = '00', GwService = 'sapgw00'
    4 ETQ399 Environment variables:
    4 ETQ399   dbs_ora_schema=SAPR3
    4 ETQ399   auth_shadow_upgrade=0
    4 ETQ010 Date & Time: 20080923124422
    4 ETQ265 Starting report "RSPTBFIL" with variant "SAP_PRP_PUTTB" in batch
    4 ETQ359 RFC Login to: System="SNB", Nr="00", GwHost="serverX", GwService="sapgw00"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "SUBST_START_REPORT_IN_BATCH" by RFC
    4 ETQ234 Call of function module "SUBST_START_REPORT_IN_BATCH" by RFC succeeded
    4 ETQ239 Logging off from SAP system
    4 ETQ311 Batch job "RSPTBFIL" with job count "12442401" scheduled
    4 ETQ359 RFC Login to: System="SNB", Nr="00", GwHost="serverX", GwService="sapgw00"
    4 ETQ232 RFC Login succeeded
    4 ETQ010 Date & Time: 20080923124428
    4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
    4 ETQ239 Logging off from SAP system
    4 ETQ399 ext. env.: DIR_LIBRARY=/sapmnt/SNB/exe
    4 ETQ399 ext. env.: LIBPATH=/sapmnt/SNB/exe:/usr/lib:/lib:/usr/sap/SNB/SYS/exe/run:/oracle/SNB/102_64/lib64
    4 ETQ399 2008/09/23 12:44:29: put_execute: (tp) forkpid:2142240
    2EETQ241 Errors found in logfiles - accumulated in file "RSPTBINI.ELG"
    1EETQ203 Upgrade phase "RUN_RSPTBFIL_PREP" aborted with errors ("20080923124430")
    root@serverX:/usr/sap/put/log:more RSPTBINI.ELG
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    PUTTB initial filling ERRORS and RETURN CODE in RSPTBPTB.SNB
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    2EETG011 "Kein Upgrade aktiv"
    2EETG011 "Kein Upgrade aktiv"
    root@serverX:/usr/sap/put/log:

    Hello Andreas, old friend from e-motion technology!
    I did open a OSS-case some days ago, and we rerun the phase successfully.
    I'm now waiting to hear from SAP-support, what they did, with their magic sticks, to fix this issue.
    //Fredrik

  • ITunes 10.5 won't open after upgrade NO ERROR MSG

    I upgraded to iTunes 10.5 yesterday on my laptop running Windows XP 32bit.
    Download and install went ok, but when I try to open iTunes it just won't load.
    There is no error message or pop-up - the hourglass icon appears briefly, and iTunes.exe comes up in the Windows Task Manager for about three seconds and then disappears.
    Tried uninstalling and reinstalling, as well as repairing in Control Panel>Add or remove Programs, but still have the same issue.
    I should mention that Quicktime opens just fine.
    Please help and thanks so very much in advance!

    iFOUND the Solution!!!
    Go to Add/Remove Programs under Control Panel and for every program that is Apple - iTunes - Quicktime related RIGHT click on it and choose "Repair" and repair it. May take some time for each program.
    Then, I got an error message saying:
    "the file "itunes library.itl" cannot be read because it was created by a newer version of itunes."
    Here, from the Start Menu, search "Apple Software Update" and update every program it says needs updating. I recently this week updated Quicktime to its latest version, but did so anyway. So I updated Quicktime and iTunes...restarted computer...and it worked.
    That's how you do it. iTunes 10.5 works fine now. Hope it does equally well for you.

  • Upgrade service error after ZFD3 SP3 to ZFD4.01 upgrade

    Hi,
    Having upgraded from ZFD3.2 SP3 to ZFD4.01 and carefully following the
    documentation instructions I still get the following error on the Inventory
    Service startup screen:
    "The Upgrade Service is migrating the schema
    An error has occurred. The upgrade service is exiting now."
    The Inv Srv object Server Status log says:
    "1178: An error occured while performing the DBSchema migration
    1177: Unable to complete all the operations, the upgrade service is exiting
    with errors.
    106: The Storer succesfully connected to the database
    108:the database in not initialized as it is being upgraded"
    All of these errors on the support site have as a fix either restart the
    Inventory Service or contact Novell.
    I've spent some hours now looking for a fix on Knowledgebase and in the Zen
    forums but can't find anything useful. This is the second time I've run the
    upgrade and this problem has occurred. I've reinstalled Zen3.2 from scratch,
    applied SP1 and SP3.
    I've checked policies and database objects, all appears as it should be.
    These seem to be the relevant errors from the log files:
    Migration Log:
    Migration Exception Message->Could not add the dbspace..ASA Error -121:
    Permission denied: unable to create the dbspace file "CIM10",
    SQLState->42501, ErrorCode->262
    Zenworksinvservice log file:
    [12/2/04 12:37:04.691] ZenInv - Upgrade Service: migrateDbToP1(true) failed
    in AlterProcedure
    [12/2/04 12:37:05.286] ZenInv - Upgrade Service: Upgrade to ZfD4.0 or ZFS3.0
    SP1 failed. Reinstall ZFD4.0 or ZFS3.0 SP1 and start the inventory server
    again
    See full logs below.
    Is there no option but to go straight to Novell?
    Regards,
    Steve Law
    zenworksinvservice-041202123653303.txt
    [12/2/04 12:36:53.280] ZENInv - Service Loader: getAttributesofDN:
    Attributes of:
    [12/2/04 12:36:53.349] ZENInv - Service Loader:
    getAttributes:Attributes={zeninvhostserver=zeninvH ostServer: Distinguished
    Name CN=SERVER1.OU=BMO.OU=UK.O=OURTREE, zeninvrole=zeninvRole: Integer 25}
    [12/2/04 12:36:53.358] ZENInv - Service Loader: Logout from NDS returnedtrue
    [12/2/04 12:36:53.725] ZENInv - Server Config: The severconfig service start
    is pending...
    [12/2/04 12:36:53.784] ZENInv - Server Config: getAttributesofDN: Attributes
    of:
    [12/2/04 12:36:53.827] ZENInv - Server Config:
    getAttributes:Attributes={zeninvscanfilepath=zenin vScanFilePath: Case Ignore
    String \\SERVER1\DATA\Zenworks\ScanDir, zeninvrole=zeninvRole: Integer 25,
    zeninvcomponentstatus=zeninvComponentStatus: 4.0 12 0}
    [12/2/04 12:36:53.832] ZENInv - Server Config: Logout from NDS returnedtrue
    [12/2/04 12:36:53.838] ZENInv - Server Config: Getting Cascade INit time
    [12/2/04 12:36:54.844] ZENInv - Server Config: Database Location Policy DN
    is CN=Zen32 Server Package:General:ZENworks
    Database.OU=Policies.OU=BMO.OU=UK.O=OURTREE
    [12/2/04 12:36:54.887] ZENInv - Server Config: getAttributesofDN: Attributes
    of:
    [12/2/04 12:36:54.918] ZENInv - Server Config:
    getAttributes:Attributes={zenlocdatabaseobject=zen locDatabaseObject:
    Distinguished Name CN=SERVER1_invDatabase.OU=BMO.OU=UK.O=OURTREE}
    [12/2/04 12:36:54.923] ZENInv - Server Config: Logout from NDS returnedtrue
    [12/2/04 12:36:54.967] ZENInv - Server Config: getAttributesofDN: Attributes
    of:
    [12/2/04 12:36:55.001] ZENInv - Server Config:
    getAttributes:Attributes={zendbpassword=zendbPassw ord: novell,
    zendbjdbcprotocol=zendbJDBCProtocol: jdbc:,
    zendbdatabasetype=zendbDatabaseType: Integer 0,
    zendbjdbcsidservice=zendbJDBCSIDService: 11.32.25.98, zendburl=zendbURL:
    Case Ignore String
    jdbc:sybase:Tds:11.32.25.98:2638?ServiceName=mgmtd b&JCONNECT_VERSION=4,
    zendbjdbcsubname=zendbJDBCSubName: Tds:, zendbjdbcdriver=zendbJDBCDriver:
    com.sybase.jdbc.SybDriver, host server=Host Server: Distinguished Name
    CN=SERVER1.OU=BMO.OU=UK.O=OURTREE, network address=Network Address: 13;20;,
    zendbuser=zendbUser: MW_DBA, zendbjdbcsubprotocol=zendbJDBCSubProtocol:
    sybase:, zendbjdbcport=zendbJDBCPort: 2638}
    [12/2/04 12:36:55.013] ZENInv - Server Config: Logout from NDS returnedtrue
    [12/2/04 12:36:56.297] ZENInv - Server Config: The severconfig service is
    started...
    [12/2/04 12:36:56.320] ZENInv - Sync Scheduler: The scheduler service start
    is pending...
    [12/2/04 12:36:56.382] ZENInv - Sync Scheduler: getAttributesofDN:
    Attributes of:
    [12/2/04 12:36:56.459] ZENInv - Sync Scheduler:
    getAttributes:Attributes={zeninvsyncrepeatinterval =zeninvSyncRepeatInterval:
    >
    [12/2/04 12:36:56.463] ZENInv - Sync Scheduler: Logout from NDS returnedtrue
    [12/2/04 12:36:56.585] ZENInv - Sync Scheduler: This is the schedule
    fetchedRun Daily: Monday, Tuesday, Wednesday, Thursday, Friday From 00:00:00
    To 22:55:00 (Randomly dispatch during time period)
    [12/2/04 12:36:56.597] ZENInv - Sync Scheduler: fetchSchedule returned: true
    [12/2/04 12:36:56.597] ZENInv - Sync Scheduler: Schedule Fired
    [12/2/04 12:36:56.597] ZENInv - Sync Scheduler: The scheduler service is
    started...
    [12/2/04 12:36:56.721] ZenInv - Upgrade Service: getAttributesofDN:
    Attributes of:
    [12/2/04 12:36:56.752] ZenInv - Upgrade Service:
    getAttributes:Attributes={zeninvcomponentstatus=ze ninvComponentStatus: 4.0
    12 0}
    [12/2/04 12:36:56.756] ZenInv - Upgrade Service: Logout from NDS
    returnedtrue
    [12/2/04 12:36:56.758] ZenInv - Upgrade Service: Info : Read
    zenInvComponentStatus = 4.0 12 0
    [12/2/04 12:36:56.758] ZenInv - Upgrade Service: Inventory Server
    zenInvComponentStatus = 4.0 12 0
    [12/2/04 12:36:56.789] Service Manager: start(ServiceDataAccessor, String[])
    not found in
    'com.novell.zenworks.desktop.inventory.strconverte r.STRConverterServiceInit'
    [12/2/04 12:36:56.815] ZENInv - STRConverter: Start with
    'ServiceStatusChangeListener' invoked
    [12/2/04 12:37:04.691] ZenInv - Upgrade Service: migrateDbToP1(true) failed
    in AlterProcedure
    [12/2/04 12:37:04.807] ZENInv - Status Reporting: Messages are written into
    XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    [12/2/04 12:37:04.845] ZENInv - Status Reporting: getAttributesofDN:
    Attributes of:
    [12/2/04 12:37:04.881] ZENInv - Status Reporting:
    getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-O j,
    "- l, "Tw s, "Ty T, "T j, "T-
    l, " s, " T, "6 j, "9Y l}
    [12/2/04 12:37:04.898] ZENInv - Status Reporting: Logout from NDS
    returnedtrue
    [12/2/04 12:37:04.912] ZENInv - Status Reporting: Number of records to add
    are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    [12/2/04 12:37:04.951] ZENInv - Status Reporting: getAttributesofDN:
    Attributes of:
    [12/2/04 12:37:04.984] ZENInv - Status Reporting:
    getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-O j,
    "- l, "Tw s, "Ty T, "T j, "T-
    l, " s, " T, "6 j, "9Y l}
    [12/2/04 12:37:04.990] ZENInv - Status Reporting: Logout from NDS
    returnedtrue
    [12/2/04 12:37:04.991] ZENInv - Status Reporting: Adding record 0 for
    DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    [12/2/04 12:37:05.113] ZENInv - Status Reporting: Logout from NDS
    returnedtrue
    [12/2/04 12:37:05.209] ZENInv - Status Reporting: Logout from NDS
    returnedtrue
    [12/2/04 12:37:05.246] ZENInv - Status Reporting: getAttributesofDN:
    Attributes of:
    [12/2/04 12:37:05.277] ZENInv - Status Reporting:
    getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "- l,
    "Tw s, "Ty T, "T j, "T- l, "
    s, " T, "6 j, "9Y l, "~; s}
    [12/2/04 12:37:05.284] ZENInv - Status Reporting: Logout from NDS
    returnedtrue
    [12/2/04 12:37:05.285] ZENInv - Status Reporting: Number of modified records
    are: 0 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    [12/2/04 12:37:05.286] ZenInv - Upgrade Service: Upgrade to ZfD4.0 or ZFS3.0
    SP1 failed. Reinstall ZFD4.0 or ZFS3.0 SP1 and start the inventory server
    again
    [12/2/04 12:37:05.288] ZENInv - Status Reporting: Messages are written into
    XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    [12/2/04 12:37:05.326] ZENInv - Status Reporting: getAttributesofDN:
    Attributes of:
    [12/2/04 12:37:05.358] ZENInv - Status Reporting:
    getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "- l,
    "Tw s, "Ty T, "T j, "T- l, "
    s, " T, "6 j, "9Y l, "~; s}
    [12/2/04 12:37:05.364] ZENInv - Status Reporting: Logout from NDS
    returnedtrue
    [12/2/04 12:37:05.365] ZENInv - Status Reporting: Number of records to add
    are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    [12/2/04 12:37:05.403] ZENInv - Status Reporting: getAttributesofDN:
    Attributes of:
    [12/2/04 12:37:05.435] ZENInv - Status Reporting:
    getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "- l,
    "Tw s, "Ty T, "T j, "T- l, "
    s, " T, "6 j, "9Y l, "~; s}
    [12/2/04 12:37:05.441] ZENInv - Status Reporting: Logout from NDS
    returnedtrue
    [12/2/04 12:37:05.445] ZENInv - Status Reporting: Adding record 0 for
    DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    [12/2/04 12:37:05.568] ZENInv - Status Reporting: Logout from NDS
    returnedtrue
    [12/2/04 12:37:05.670] ZENInv - Status Reporting: Logout from NDS
    returnedtrue
    [12/2/04 12:37:05.707] ZENInv - Status Reporting: getAttributesofDN:
    Attributes of:
    [12/2/04 12:37:05.738] ZENInv - Status Reporting:
    getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw s,
    "Ty T, "T j, "T- l, " s, "
    T, "6 j, "9Y l, "~; s, "s? T}
    [12/2/04 12:37:05.747] ZENInv - Status Reporting: Logout from NDS
    returnedtrue
    [12/2/04 12:37:05.748] ZENInv - Status Reporting: Number of modified records
    are: 0 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    [12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
    modifyEnumTables, Running EnumModifier in integrated mode with
    upgradeService
    [12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
    modifyEnumTables, dbDriver:com.sybase.jdbc.SybDriver
    [12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
    modifyEnumTables,
    dbURL:jdbc:sybase:Tds:11.32.25.98:2638?ServiceName =mgmtdb&JCONNECT_VERSION=4
    [12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
    modifyEnumTables, dbType:0
    [12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
    modifyEnumTables, dbUser:MW_DBA
    [12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
    modifyEnumTables, dbPasswd:novell
    [12/2/04 12:37:06.844] Service Manager: start(ServiceDataAccessor, String[])
    not found in
    'com.novell.zenworks.desktop.inventory.selector.Se lectorServiceInit'
    [12/2/04 12:37:07.046] ZENInv - Selector: Selector Services Started
    Successfully
    [12/2/04 12:37:07.046] Service Manager: start(ServiceDataAccessor, String[])
    not found in
    'com.novell.zenworks.desktop.inventory.storer.Stor erServiceInit'
    [12/2/04 12:37:07.062] ZENInv - Selector: Selector Code Profiling disabled
    [12/2/04 12:37:07.067] ZENInv - Storer: Start with
    'ServiceStatusChangeListener' invoked
    [12/2/04 12:37:17.010] ZENInv - Selector: Getting ServerConfig HashTable
    [12/2/04 12:37:17.010] ZENInv - Selector: Getting InvServiceObj from
    HashTable
    [12/2/04 12:37:17.011] ZENInv - Selector: Getting NDSTree from ServiceObject
    [12/2/04 12:37:17.013] ZENInv - Selector: NDSTree=null
    [12/2/04 12:37:17.014] ZENInv - Selector: Getting InventoryServiceDN from
    ServiceObject
    [12/2/04 12:37:17.014] ZENInv - Selector:
    InventoryServiceDN=CN=SERVER1_ZenInvService.OU=BMO .OU=UK.O=OURTREE
    [12/2/04 12:37:17.014] ZENInv - Selector: Getting ScanDir from ServiceObject
    [12/2/04 12:37:17.015] ZENInv - Selector: ScanDir=DATA:\Zenworks\ScanDir
    [12/2/04 12:37:17.021] ZENInv - Selector: NEW SyncServiceTable Constructor
    Invoked
    [12/2/04 12:37:17.022] ZENInv - Selector: Creating-Verifying
    Serialize-Deserialize Location DATA:\Zenworks\ScanDir\stable\
    [12/2/04 12:37:17.022] ZENInv - Selector: Checking for
    DATA:\Zenworks\ScanDir\stable\
    [12/2/04 12:37:17.023] ZENInv - Selector: synchTableDir exists. Check wether
    this is a directory or File
    [12/2/04 12:37:17.024] ZENInv - Storer: Storer from dblocation user: MW_DBA
    driver: com.sybase.jdbc.SybDriver protocol: jdbc:sybase: subname: Tds: port:
    2638
    [12/2/04 12:37:17.024] ZENInv - Selector: Directory
    ExistsDATA:\Zenworks\ScanDir\stable\
    [12/2/04 12:37:17.024] ZENInv - Selector: Directory Existence
    ConfirmedDATA:\Zenworks\ScanDir\stable\
    [12/2/04 12:37:17.025] ZENInv - Selector: Serialize-Deserialize File
    DATA:\Zenworks\ScanDir\stable\STABLE.SER
    [12/2/04 12:37:17.025] ZENInv - Selector: Initializing SyncServiceTable
    [12/2/04 12:37:17.025] ZENInv - Selector: SynchTable Does not Exist
    [12/2/04 12:37:17.026] ZENInv - Selector: Attempting to Load SynchTable From
    Serialized File
    [12/2/04 12:37:17.026] ZENInv - Selector: DeSerializing hashTable
    FromDATA:\Zenworks\ScanDir\stable\STABLE.SER
    [12/2/04 12:37:17.029] ZENInv - Storer: url[From DBObject]:
    jdbc:sybase:Tds:11.32.25.98:2638?ServiceName=mgmtd b&JCONNECT_VERSION=4
    [12/2/04 12:37:17.035] ZENInv - Storer: wsdn:
    CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREEi = 0
    [12/2/04 12:37:17.037] ZENInv - Selector: DeSerializing SyncService
    HashTable
    [12/2/04 12:37:17.041] ZENInv - Selector: SynchTable Loaded Sucessfully From
    Serialized File
    [12/2/04 12:37:17.042] ZENInv - Selector: Getting hasDatabase status from
    ServiceObject
    [12/2/04 12:37:17.042] ZENInv - Selector: hasDatabase is true from
    ServiceObject
    [12/2/04 12:37:17.042] ZENInv - Selector: Getting isStandAlone status from
    ServiceObject
    [12/2/04 12:37:17.043] ZENInv - Selector: isStandAlone is true from
    ServiceObject
    [12/2/04 12:37:17.043] ZENInv - Selector: ConvDir
    DATA:\Zenworks\ScanDir\conv\
    [12/2/04 12:37:17.044] ZENInv - Selector: ConvDir exists. Check wether this
    is a directory or File
    [12/2/04 12:37:17.044] ZENInv - Selector: DATA:\Zenworks\ScanDir
    [12/2/04 12:37:17.045] ZENInv - Selector: DATA:\Zenworks\ScanDir\DbDir
    [12/2/04 12:37:17.045] ZENInv - Selector:
    [12/2/04 12:37:17.048] ZENInv - Selector: Getting SELECTOR_STORER Synch
    Object
    [12/2/04 12:37:17.049] ZENInv - Selector: Getting SELECTOR_COLLECTOR Synch
    Object
    [12/2/04 12:37:17.049] ZENInv - Selector: Getting SELECTOR_CONVERTER Synch
    Object
    [12/2/04 12:37:17.049] ZENInv - Selector: Getting CONVERTER_SELECTOR Synch
    Object
    [12/2/04 12:37:17.050] ZENInv - Selector: Getting SYNCHSERVICE_SELECTOR
    Synch Object
    [12/2/04 12:37:17.061] ZENInv - Storer: Loading Storer test properties file
    [12/2/04 12:37:17.080] Service Manager: start(ServiceDataAccessor, String[])
    not found in
    'com.novell.zenworks.common.inventory.scancollecto r.ScanCollector'
    [12/2/04 12:37:17.338] ZENInv - IFS Server: zenInvScanCollector:
    FileServiceController: Startup Properties: {chunksize=4096,
    lockfactory=com.novell.zenworks.common.inventory.i fs.utils.MemoryFileLockFac
    tory, lockseed=ScanSelectorLock, transfers=100,
    rootdirectory=DATA:\Zenworks\ScanDir, timeout=60000,
    servicename=zenInvScanCollector, portnumber=0}
    [12/2/04 12:37:17.499] Service Manager: start(ServiceDataAccessor, String[])
    not found in
    'com.novell.zenworks.desktop.inventory.InvSyncServ ice.ManagableSyncService'
    [12/2/04 12:37:17.579] ZENInv - Inventory Sync Service: SyncService thread
    started
    [12/2/04 12:37:17.579] ZENInv - Inventory Sync Service: NEW SyncServiceTable
    Constructor Invoked
    [12/2/04 12:37:17.580] ZENInv - Inventory Sync Service: Creating-Verifying
    Serialize-Deserialize Location DATA:\Zenworks\ScanDir\stable\
    [12/2/04 12:37:17.580] ZENInv - Inventory Sync Service: Checking for
    DATA:\Zenworks\ScanDir\stable\
    [12/2/04 12:37:17.585] ZENInv - Inventory Sync Service: synchTableDir
    exists. Check wether this is a directory or File
    [12/2/04 12:37:17.585] ZENInv - Inventory Sync Service: Directory
    ExistsDATA:\Zenworks\ScanDir\stable\
    [12/2/04 12:37:17.586] ZENInv - Inventory Sync Service: Directory Existence
    ConfirmedDATA:\Zenworks\ScanDir\stable\
    [12/2/04 12:37:17.586] ZENInv - Inventory Sync Service:
    Serialize-Deserialize File DATA:\Zenworks\ScanDir\stable\STABLE.SER
    [12/2/04 12:37:17.587] ZENInv - Inventory Sync Service: Initializing
    SyncServiceTable
    [12/2/04 12:37:17.587] ZENInv - Inventory Sync Service: Will Use the
    existing SyncServiceTable
    [12/2/04 12:37:18.445] ZENInv - Status Reporting: Messages are written into
    XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    [12/2/04 12:37:18.484] ZENInv - Status Reporting: getAttributesofDN:
    Attributes of:
    [12/2/04 12:37:18.520] ZENInv - Status Reporting:
    getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw s,
    "Ty T, "T j, "T- l, " s, "
    T, "6 j, "9Y l, "~; s, "s? T}
    [12/2/04 12:37:18.525] ZENInv - Status Reporting: Logout from NDS
    returnedtrue
    [12/2/04 12:37:18.526] ZENInv - Status Reporting: Number of records to add
    are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    [12/2/04 12:37:18.564] ZENInv - Status Reporting: getAttributesofDN:
    Attributes of:
    [12/2/04 12:37:18.595] ZENInv - Status Reporting:
    getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw s,
    "Ty T, "T j, "T- l, " s, "
    T, "6 j, "9Y l, "~; s, "s? T}
    [12/2/04 12:37:18.600] ZENInv - Status Reporting: Logout from NDS
    returnedtrue
    [12/2/04 12:37:18.601] ZENInv - Status Reporting: Adding record 0 for
    DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    [12/2/04 12:37:18.699] ZENInv - Status Reporting: Logout from NDS
    returnedtrue
    [12/2/04 12:37:18.783] ZENInv - Status Reporting: Logout from NDS
    returnedtrue
    Migration Log
    Starting the AlterProcedure Log at 2004-12-02 11:45:29.731
    Unzipping the file migrate.zip
    Transforming the Migration SQL files...
    ...3
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Initial_0
    is copied
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
    nPotsModem_1 is done with 545 0x03010c0a010202
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
    nOperatingSystem_2 is done with 143 0x03010e02
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
    nNetworkAdapter_3 is done with 544 0x03010c0b04
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
    nDiskDrive_4 is done with 543 0x03010c080301
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Wi
    nOperatingSystem_5 is done with 547 0x03010e0201
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\zenworks_vi
    deoadapter_6 is done with 53 0x03010c030c0201
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Sy
    stemInfo_7 is done with 228 0x03020404
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_so
    undadapter_8 is done with 546 0x03010c16
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Mo
    therboard_9 is done with 221 0x0302040101
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Lo
    gicalDiskDrive_10 is done with 113 0x03010c110402
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_in
    ventoryscanner_11 is done with 181 0x03011402
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_in
    stalleddriver_12 is done with 548 0x2701
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_In
    stalledDirectory_13 is done with 551 0x4a
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_bu
    s_14 is done with 35 0x03010c0301
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_bi
    os_15 is done with 180 0x0301140101
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
    CurrentLoginUser_16 is done with 549 0x48
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
    LastLoginUser_17 is done with 550 0x49
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
    User_18 is done with 205 0x03011a
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\misc_19 is
    copied
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybcustom_2
    0 is copied
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybdelprocs
    _21 is copied
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybextended
    _22 is copied
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybrmaudit_
    23 is copied
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\CIM_Process
    or_24 is copied
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ne
    twareOperatingSystem_24 is done with 142 0x03010e01
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\indytoprom_
    26 is copied
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Post_30 is
    copied
    Starting Schema Migration
    Adding the extra db spaces...
    SELECT file_name FROM SYSFILE WHERE dbspace_name LIKE '%CIM9%'
    has the results
    File_NAME=mgmtdb9.db
    dbfile's base directory =
    SELECT file_name FROM SYSFILE WHERE dbspace_name LIKE '%CIM10%'
    CREATE DBSPACE CIM10 AS 'mgmtdb10.db'
    Totaltime taken for Schema Migration : 149
    Migration Exception Message->Could not add the dbspace..ASA Error -121:
    Permission denied: unable to create the dbspace file "CIM10",
    SQLState->42501, ErrorCode->262

    I am getting identical errors with NW6.5 SP3, edir 8.7.3.6 upgrading from
    ZFD4.01 to ZFD6.5. Haven't found any knowledgebase items on it.
    Thanks,
    Doug Streit
    > Extra info: this is a NW6.5 SP2 server with edir 8.7.3.3, Sybase database.
    >
    > "SLaw" <[email protected]> wrote in message
    > news:[email protected]...
    > > Hi,
    > >
    > > Having upgraded from ZFD3.2 SP3 to ZFD4.01 and carefully following the
    > > documentation instructions I still get the following error on the
    > Inventory
    > > Service startup screen:
    > >
    > > "The Upgrade Service is migrating the schema
    > > An error has occurred. The upgrade service is exiting now."
    > >
    > > The Inv Srv object Server Status log says:
    > >
    > > "1178: An error occured while performing the DBSchema migration
    > > 1177: Unable to complete all the operations, the upgrade service is
    > exiting
    > > with errors.
    > > 106: The Storer succesfully connected to the database
    > > 108:the database in not initialized as it is being upgraded"
    > >
    > > All of these errors on the support site have as a fix either restart the
    > > Inventory Service or contact Novell.
    > >
    > > I've spent some hours now looking for a fix on Knowledgebase and in the
    > Zen
    > > forums but can't find anything useful. This is the second time I've run
    > the
    > > upgrade and this problem has occurred. I've reinstalled Zen3.2 from
    > scratch,
    > > applied SP1 and SP3.
    > > I've checked policies and database objects, all appears as it should be.
    > >
    > >
    > > These seem to be the relevant errors from the log files:
    > >
    > > Migration Log:
    > > Migration Exception Message->Could not add the dbspace..ASA Error -121:
    > > Permission denied: unable to create the dbspace file "CIM10",
    > > SQLState->42501, ErrorCode->262
    > >
    > > Zenworksinvservice log file:
    > > [12/2/04 12:37:04.691] ZenInv - Upgrade Service: migrateDbToP1(true)
    > failed
    > > in AlterProcedure
    > > [12/2/04 12:37:05.286] ZenInv - Upgrade Service: Upgrade to ZfD4.0 or
    > ZFS3.0
    > > SP1 failed. Reinstall ZFD4.0 or ZFS3.0 SP1 and start the inventory server
    > > again
    > >
    > > See full logs below.
    > >
    > > Is there no option but to go straight to Novell?
    > >
    > > Regards,
    > >
    > >
    > > Steve Law
    > >
    > > zenworksinvservice-041202123653303.txt
    > > *********************************
    > > [12/2/04 12:36:53.280] ZENInv - Service Loader: getAttributesofDN:
    > > Attributes of:
    > > [12/2/04 12:36:53.349] ZENInv - Service Loader:
    > > getAttributes:Attributes={zeninvhostserver=zeninvH ostServer: Distinguished
    > > Name CN=SERVER1.OU=BMO.OU=UK.O=OURTREE, zeninvrole=zeninvRole: Integer 25}
    > > [12/2/04 12:36:53.358] ZENInv - Service Loader: Logout from NDS
    > returnedtrue
    > > [12/2/04 12:36:53.725] ZENInv - Server Config: The severconfig service
    > start
    > > is pending...
    > > [12/2/04 12:36:53.784] ZENInv - Server Config: getAttributesofDN:
    > Attributes
    > > of:
    > > [12/2/04 12:36:53.827] ZENInv - Server Config:
    > > getAttributes:Attributes={zeninvscanfilepath=zenin vScanFilePath: Case
    > Ignore
    > > String \\SERVER1\DATA\Zenworks\ScanDir, zeninvrole=zeninvRole: Integer 25,
    > > zeninvcomponentstatus=zeninvComponentStatus: 4.0 12 0}
    > > [12/2/04 12:36:53.832] ZENInv - Server Config: Logout from NDS
    > returnedtrue
    > > [12/2/04 12:36:53.838] ZENInv - Server Config: Getting Cascade INit time
    > > [12/2/04 12:36:54.844] ZENInv - Server Config: Database Location Policy
    > DN
    > > is CN=Zen32 Server Package:General:ZENworks
    > > Database.OU=Policies.OU=BMO.OU=UK.O=OURTREE
    > > [12/2/04 12:36:54.887] ZENInv - Server Config: getAttributesofDN:
    > Attributes
    > > of:
    > > [12/2/04 12:36:54.918] ZENInv - Server Config:
    > > getAttributes:Attributes={zenlocdatabaseobject=zen locDatabaseObject:
    > > Distinguished Name CN=SERVER1_invDatabase.OU=BMO.OU=UK.O=OURTREE}
    > > [12/2/04 12:36:54.923] ZENInv - Server Config: Logout from NDS
    > returnedtrue
    > > [12/2/04 12:36:54.967] ZENInv - Server Config: getAttributesofDN:
    > Attributes
    > > of:
    > > [12/2/04 12:36:55.001] ZENInv - Server Config:
    > > getAttributes:Attributes={zendbpassword=zendbPassw ord: novell,
    > > zendbjdbcprotocol=zendbJDBCProtocol: jdbc:,
    > > zendbdatabasetype=zendbDatabaseType: Integer 0,
    > > zendbjdbcsidservice=zendbJDBCSIDService: 11.32.25.98, zendburl=zendbURL:
    > > Case Ignore String
    > > jdbc:sybase:Tds:11.32.25.98:2638?ServiceName=mgmtd b&JCONNECT_VERSION=4,
    > > zendbjdbcsubname=zendbJDBCSubName: Tds:, zendbjdbcdriver=zendbJDBCDriver:
    > > com.sybase.jdbc.SybDriver, host server=Host Server: Distinguished Name
    > > CN=SERVER1.OU=BMO.OU=UK.O=OURTREE, network address=Network Address:
    > 13;20;,
    > > zendbuser=zendbUser: MW_DBA, zendbjdbcsubprotocol=zendbJDBCSubProtocol:
    > > sybase:, zendbjdbcport=zendbJDBCPort: 2638}
    > > [12/2/04 12:36:55.013] ZENInv - Server Config: Logout from NDS
    > returnedtrue
    > > [12/2/04 12:36:56.297] ZENInv - Server Config: The severconfig service is
    > > started...
    > > [12/2/04 12:36:56.320] ZENInv - Sync Scheduler: The scheduler service
    > start
    > > is pending...
    > > [12/2/04 12:36:56.382] ZENInv - Sync Scheduler: getAttributesofDN:
    > > Attributes of:
    > > [12/2/04 12:36:56.459] ZENInv - Sync Scheduler:
    > >
    > getAttributes:Attributes={zeninvsyncrepeatinterval =zeninvSyncRepeatInterval:
    > > >
    > > }
    > > [12/2/04 12:36:56.463] ZENInv - Sync Scheduler: Logout from NDS
    > returnedtrue
    > > [12/2/04 12:36:56.585] ZENInv - Sync Scheduler: This is the schedule
    > > fetchedRun Daily: Monday, Tuesday, Wednesday, Thursday, Friday From
    > 00:00:00
    > > To 22:55:00 (Randomly dispatch during time period)
    > > [12/2/04 12:36:56.597] ZENInv - Sync Scheduler: fetchSchedule returned:
    > true
    > > [12/2/04 12:36:56.597] ZENInv - Sync Scheduler: Schedule Fired
    > > [12/2/04 12:36:56.597] ZENInv - Sync Scheduler: The scheduler service is
    > > started...
    > > [12/2/04 12:36:56.721] ZenInv - Upgrade Service: getAttributesofDN:
    > > Attributes of:
    > > [12/2/04 12:36:56.752] ZenInv - Upgrade Service:
    > > getAttributes:Attributes={zeninvcomponentstatus=ze ninvComponentStatus: 4.0
    > > 12 0}
    > > [12/2/04 12:36:56.756] ZenInv - Upgrade Service: Logout from NDS
    > > returnedtrue
    > > [12/2/04 12:36:56.758] ZenInv - Upgrade Service: Info : Read
    > > zenInvComponentStatus = 4.0 12 0
    > > [12/2/04 12:36:56.758] ZenInv - Upgrade Service: Inventory Server
    > > zenInvComponentStatus = 4.0 12 0
    > > [12/2/04 12:36:56.789] Service Manager: start(ServiceDataAccessor,
    > String[])
    > > not found in
    > > 'com.novell.zenworks.desktop.inventory.strconverte r.STRConverterServiceIni
    > t'
    > > [12/2/04 12:36:56.815] ZENInv - STRConverter: Start with
    > > 'ServiceStatusChangeListener' invoked
    > > [12/2/04 12:37:04.691] ZenInv - Upgrade Service: migrateDbToP1(true)
    > failed
    > > in AlterProcedure
    > > [12/2/04 12:37:04.807] ZENInv - Status Reporting: Messages are written
    > into
    > > XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    > > [12/2/04 12:37:04.845] ZENInv - Status Reporting: getAttributesofDN:
    > > Attributes of:
    > > [12/2/04 12:37:04.881] ZENInv - Status Reporting:
    > > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-�O
    > j,
    > > "-�� l, "Tw� �s, "Ty� �T, "T�� j, "T�-
    > > l, "�� �s, "� �T, "�6� j, "�9Y l}
    > > [12/2/04 12:37:04.898] ZENInv - Status Reporting: Logout from NDS
    > > returnedtrue
    > > [12/2/04 12:37:04.912] ZENInv - Status Reporting: Number of records to add
    > > are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    > > [12/2/04 12:37:04.951] ZENInv - Status Reporting: getAttributesofDN:
    > > Attributes of:
    > > [12/2/04 12:37:04.984] ZENInv - Status Reporting:
    > > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-�O
    > j,
    > > "-�� l, "Tw� �s, "Ty� �T, "T�� j, "T�-
    > > l, "�� �s, "� �T, "�6� j, "�9Y l}
    > > [12/2/04 12:37:04.990] ZENInv - Status Reporting: Logout from NDS
    > > returnedtrue
    > > [12/2/04 12:37:04.991] ZENInv - Status Reporting: Adding record 0 for
    > > DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    > > [12/2/04 12:37:05.113] ZENInv - Status Reporting: Logout from NDS
    > > returnedtrue
    > > [12/2/04 12:37:05.209] ZENInv - Status Reporting: Logout from NDS
    > > returnedtrue
    > > [12/2/04 12:37:05.246] ZENInv - Status Reporting: getAttributesofDN:
    > > Attributes of:
    > > [12/2/04 12:37:05.277] ZENInv - Status Reporting:
    > > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-��
    > l,
    > > "Tw� �s, "Ty� �T, "T�� j, "T�- l, "��
    > > �s, "� �T, "�6� j, "�9Y l, "�~; �s}
    > > [12/2/04 12:37:05.284] ZENInv - Status Reporting: Logout from NDS
    > > returnedtrue
    > > [12/2/04 12:37:05.285] ZENInv - Status Reporting: Number of modified
    > records
    > > are: 0 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    > > [12/2/04 12:37:05.286] ZenInv - Upgrade Service: Upgrade to ZfD4.0 or
    > ZFS3.0
    > > SP1 failed. Reinstall ZFD4.0 or ZFS3.0 SP1 and start the inventory server
    > > again
    > > [12/2/04 12:37:05.288] ZENInv - Status Reporting: Messages are written
    > into
    > > XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    > > [12/2/04 12:37:05.326] ZENInv - Status Reporting: getAttributesofDN:
    > > Attributes of:
    > > [12/2/04 12:37:05.358] ZENInv - Status Reporting:
    > > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-��
    > l,
    > > "Tw� �s, "Ty� �T, "T�� j, "T�- l, "��
    > > �s, "� �T, "�6� j, "�9Y l, "�~; �s}
    > > [12/2/04 12:37:05.364] ZENInv - Status Reporting: Logout from NDS
    > > returnedtrue
    > > [12/2/04 12:37:05.365] ZENInv - Status Reporting: Number of records to add
    > > are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    > > [12/2/04 12:37:05.403] ZENInv - Status Reporting: getAttributesofDN:
    > > Attributes of:
    > > [12/2/04 12:37:05.435] ZENInv - Status Reporting:
    > > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-��
    > l,
    > > "Tw� �s, "Ty� �T, "T�� j, "T�- l, "��
    > > �s, "� �T, "�6� j, "�9Y l, "�~; �s}
    > > [12/2/04 12:37:05.441] ZENInv - Status Reporting: Logout from NDS
    > > returnedtrue
    > > [12/2/04 12:37:05.445] ZENInv - Status Reporting: Adding record 0 for
    > > DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    > > [12/2/04 12:37:05.568] ZENInv - Status Reporting: Logout from NDS
    > > returnedtrue
    > > [12/2/04 12:37:05.670] ZENInv - Status Reporting: Logout from NDS
    > > returnedtrue
    > > [12/2/04 12:37:05.707] ZENInv - Status Reporting: getAttributesofDN:
    > > Attributes of:
    > > [12/2/04 12:37:05.738] ZENInv - Status Reporting:
    > > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw�
    > �s,
    > > "Ty� �T, "T�� j, "T�- l, "�� �s, "�
    > > �T, "�6� j, "�9Y l, "�~; �s, "�s? �T}
    > > [12/2/04 12:37:05.747] ZENInv - Status Reporting: Logout from NDS
    > > returnedtrue
    > > [12/2/04 12:37:05.748] ZENInv - Status Reporting: Number of modified
    > records
    > > are: 0 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    > > [12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
    > > modifyEnumTables, Running EnumModifier in integrated mode with
    > > upgradeService
    > > [12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
    > > modifyEnumTables, dbDriver:com.sybase.jdbc.SybDriver
    > > [12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
    > > modifyEnumTables,
    > >
    > dbURL:jdbc:sybase:Tds:11.32.25.98:2638?ServiceName =mgmtdb&JCONNECT_VERSION=4
    > > [12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
    > > modifyEnumTables, dbType:0
    > > [12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
    > > modifyEnumTables, dbUser:MW_DBA
    > > [12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
    > > modifyEnumTables, dbPasswd:novell
    > > [12/2/04 12:37:06.844] Service Manager: start(ServiceDataAccessor,
    > String[])
    > > not found in
    > > 'com.novell.zenworks.desktop.inventory.selector.Se lectorServiceInit'
    > > [12/2/04 12:37:07.046] ZENInv - Selector: Selector Services Started
    > > Successfully
    > > [12/2/04 12:37:07.046] Service Manager: start(ServiceDataAccessor,
    > String[])
    > > not found in
    > > 'com.novell.zenworks.desktop.inventory.storer.Stor erServiceInit'
    > > [12/2/04 12:37:07.062] ZENInv - Selector: Selector Code Profiling disabled
    > > [12/2/04 12:37:07.067] ZENInv - Storer: Start with
    > > 'ServiceStatusChangeListener' invoked
    > > [12/2/04 12:37:17.010] ZENInv - Selector: Getting ServerConfig HashTable
    > > [12/2/04 12:37:17.010] ZENInv - Selector: Getting InvServiceObj from
    > > HashTable
    > > [12/2/04 12:37:17.011] ZENInv - Selector: Getting NDSTree from
    > ServiceObject
    > > [12/2/04 12:37:17.013] ZENInv - Selector: NDSTree=null
    > > [12/2/04 12:37:17.014] ZENInv - Selector: Getting InventoryServiceDN from
    > > ServiceObject
    > > [12/2/04 12:37:17.014] ZENInv - Selector:
    > > InventoryServiceDN=CN=SERVER1_ZenInvService.OU=BMO .OU=UK.O=OURTREE
    > > [12/2/04 12:37:17.014] ZENInv - Selector: Getting ScanDir from
    > ServiceObject
    > > [12/2/04 12:37:17.015] ZENInv - Selector: ScanDir=DATA:\Zenworks\ScanDir
    > > [12/2/04 12:37:17.021] ZENInv - Selector: NEW SyncServiceTable Constructor
    > > Invoked
    > > [12/2/04 12:37:17.022] ZENInv - Selector: Creating-Verifying
    > > Serialize-Deserialize Location DATA:\Zenworks\ScanDir\stable\
    > > [12/2/04 12:37:17.022] ZENInv - Selector: Checking for
    > > DATA:\Zenworks\ScanDir\stable\
    > > [12/2/04 12:37:17.023] ZENInv - Selector: synchTableDir exists. Check
    > wether
    > > this is a directory or File
    > > [12/2/04 12:37:17.024] ZENInv - Storer: Storer from dblocation user:
    > MW_DBA
    > > driver: com.sybase.jdbc.SybDriver protocol: jdbc:sybase: subname: Tds:
    > port:
    > > 2638
    > > [12/2/04 12:37:17.024] ZENInv - Selector: Directory
    > > ExistsDATA:\Zenworks\ScanDir\stable\
    > > [12/2/04 12:37:17.024] ZENInv - Selector: Directory Existence
    > > ConfirmedDATA:\Zenworks\ScanDir\stable\
    > > [12/2/04 12:37:17.025] ZENInv - Selector: Serialize-Deserialize File
    > > DATA:\Zenworks\ScanDir\stable\STABLE.SER
    > > [12/2/04 12:37:17.025] ZENInv - Selector: Initializing SyncServiceTable
    > > [12/2/04 12:37:17.025] ZENInv - Selector: SynchTable Does not Exist
    > > [12/2/04 12:37:17.026] ZENInv - Selector: Attempting to Load SynchTable
    > From
    > > Serialized File
    > > [12/2/04 12:37:17.026] ZENInv - Selector: DeSerializing hashTable
    > > FromDATA:\Zenworks\ScanDir\stable\STABLE.SER
    > > [12/2/04 12:37:17.029] ZENInv - Storer: url[From DBObject]:
    > > jdbc:sybase:Tds:11.32.25.98:2638?ServiceName=mgmtd b&JCONNECT_VERSION=4
    > > [12/2/04 12:37:17.035] ZENInv - Storer: wsdn:
    > > CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREEi = 0
    > > [12/2/04 12:37:17.037] ZENInv - Selector: DeSerializing SyncService
    > > HashTable
    > > [12/2/04 12:37:17.041] ZENInv - Selector: SynchTable Loaded Sucessfully
    > From
    > > Serialized File
    > > [12/2/04 12:37:17.042] ZENInv - Selector: Getting hasDatabase status from
    > > ServiceObject
    > > [12/2/04 12:37:17.042] ZENInv - Selector: hasDatabase is true from
    > > ServiceObject
    > > [12/2/04 12:37:17.042] ZENInv - Selector: Getting isStandAlone status from
    > > ServiceObject
    > > [12/2/04 12:37:17.043] ZENInv - Selector: isStandAlone is true from
    > > ServiceObject
    > > [12/2/04 12:37:17.043] ZENInv - Selector: ConvDir
    > > DATA:\Zenworks\ScanDir\conv\
    > > [12/2/04 12:37:17.044] ZENInv - Selector: ConvDir exists. Check wether
    > this
    > > is a directory or File
    > > [12/2/04 12:37:17.044] ZENInv - Selector: DATA:\Zenworks\ScanDir
    > > [12/2/04 12:37:17.045] ZENInv - Selector: DATA:\Zenworks\ScanDir\DbDir
    > > [12/2/04 12:37:17.045] ZENInv - Selector:
    > > [12/2/04 12:37:17.048] ZENInv - Selector: Getting SELECTOR_STORER Synch
    > > Object
    > > [12/2/04 12:37:17.049] ZENInv - Selector: Getting SELECTOR_COLLECTOR Synch
    > > Object
    > > [12/2/04 12:37:17.049] ZENInv - Selector: Getting SELECTOR_CONVERTER Synch
    > > Object
    > > [12/2/04 12:37:17.049] ZENInv - Selector: Getting CONVERTER_SELECTOR Synch
    > > Object
    > > [12/2/04 12:37:17.050] ZENInv - Selector: Getting SYNCHSERVICE_SELECTOR
    > > Synch Object
    > > [12/2/04 12:37:17.061] ZENInv - Storer: Loading Storer test properties
    > file
    > > [12/2/04 12:37:17.080] Service Manager: start(ServiceDataAccessor,
    > String[])
    > > not found in
    > > 'com.novell.zenworks.common.inventory.scancollecto r.ScanCollector'
    > > [12/2/04 12:37:17.338] ZENInv - IFS Server: zenInvScanCollector:
    > > FileServiceController: Startup Properties: {chunksize=4096,
    > >
    > lockfactory=com.novell.zenworks.common.inventory.i fs.utils.MemoryFileLockFac
    > > tory, lockseed=ScanSelectorLock, transfers=100,
    > > rootdirectory=DATA:\Zenworks\ScanDir, timeout=60000,
    > > servicename=zenInvScanCollector, portnumber=0}
    > > [12/2/04 12:37:17.499] Service Manager: start(ServiceDataAccessor,
    > String[])
    > > not found in
    > >
    > 'com.novell.zenworks.desktop.inventory.InvSyncServ ice.ManagableSyncService'
    > > [12/2/04 12:37:17.579] ZENInv - Inventory Sync Service: SyncService thread
    > > started
    > > [12/2/04 12:37:17.579] ZENInv - Inventory Sync Service: NEW
    > SyncServiceTable
    > > Constructor Invoked
    > > [12/2/04 12:37:17.580] ZENInv - Inventory Sync Service: Creating-Verifying
    > > Serialize-Deserialize Location DATA:\Zenworks\ScanDir\stable\
    > > [12/2/04 12:37:17.580] ZENInv - Inventory Sync Service: Checking for
    > > DATA:\Zenworks\ScanDir\stable\
    > > [12/2/04 12:37:17.585] ZENInv - Inventory Sync Service: synchTableDir
    > > exists. Check wether this is a directory or File
    > > [12/2/04 12:37:17.585] ZENInv - Inventory Sync Service: Directory
    > > ExistsDATA:\Zenworks\ScanDir\stable\
    > > [12/2/04 12:37:17.586] ZENInv - Inventory Sync Service: Directory
    > Existence
    > > ConfirmedDATA:\Zenworks\ScanDir\stable\
    > > [12/2/04 12:37:17.586] ZENInv - Inventory Sync Service:
    > > Serialize-Deserialize File DATA:\Zenworks\ScanDir\stable\STABLE.SER
    > > [12/2/04 12:37:17.587] ZENInv - Inventory Sync Service: Initializing
    > > SyncServiceTable
    > > [12/2/04 12:37:17.587] ZENInv - Inventory Sync Service: Will Use the
    > > existing SyncServiceTable
    > > [12/2/04 12:37:18.445] ZENInv - Status Reporting: Messages are written
    > into
    > > XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    > > [12/2/04 12:37:18.484] ZENInv - Status Reporting: getAttributesofDN:
    > > Attributes of:
    > > [12/2/04 12:37:18.520] ZENInv - Status Reporting:
    > > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw�
    > �s,
    > > "Ty� �T, "T�� j, "T�- l, "�� �s, "�
    > > �T, "�6� j, "�9Y l, "�~; �s, "�s? �T}
    > > [12/2/04 12:37:18.525] ZENInv - Status Reporting: Logout from NDS
    > > returnedtrue
    > > [12/2/04 12:37:18.526] ZENInv - Status Reporting: Number of records to add
    > > are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    > > [12/2/04 12:37:18.564] ZENInv - Status Reporting: getAttributesofDN:
    > > Attributes of:
    > > [12/2/04 12:37:18.595] ZENInv - Status Reporting:
    > > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw�
    > �s,
    > > "Ty� �T, "T�� j, "T�- l, "�� �s, "�
    > > �T, "�6� j, "�9Y l, "�~; �s, "�s? �T}
    > > [12/2/04 12:37:18.600] ZENInv - Status Reporting: Logout from NDS
    > > returnedtrue
    > > [12/2/04 12:37:18.601] ZENInv - Status Reporting: Adding record 0 for
    > > DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    > > [12/2/04 12:37:18.699] ZENInv - Status Reporting: Logout from NDS
    > > returnedtrue
    > > [12/2/04 12:37:18.783] ZENInv - Status Reporting: Logout from NDS
    > > returnedtrue
    > >
    > > Migration Log
    > > ***********
    > > Starting the AlterProcedure Log at 2004-12-02 11:45:29.731
    > > Unzipping the file migrate.zip
    > > Transforming the Migration SQL files...
    > > ..3
    > > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Initial_0
    > > is copied
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
    > > nPotsModem_1 is done with 545 0x03010c0a010202
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
    > > nOperatingSystem_2 is done with 143 0x03010e02
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
    > > nNetworkAdapter_3 is done with 544 0x03010c0b04
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
    > > nDiskDrive_4 is done with 543 0x03010c080301
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Wi
    > > nOperatingSystem_5 is done with 547 0x03010e0201
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\zenworks_vi
    > > deoadapter_6 is done with 53 0x03010c030c0201
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Sy
    > > stemInfo_7 is done with 228 0x03020404
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_so
    > > undadapter_8 is done with 546 0x03010c16
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Mo
    > > therboard_9 is done with 221 0x0302040101
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Lo
    > > gicalDiskDrive_10 is done with 113 0x03010c110402
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_in
    > > ventoryscanner_11 is done with 181 0x03011402
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_in
    > > stalleddriver_12 is done with 548 0x2701
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_In
    > > stalledDirectory_13 is done with 551 0x4a
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_bu
    > > s_14 is done with 35 0x03010c0301
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_bi
    > > os_15 is done with 180 0x0301140101
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
    > > CurrentLoginUser_16 is done with 549 0x48
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
    > > LastLoginUser_17 is done with 550 0x49
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
    > > User_18 is done with 205 0x03011a
    > > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\misc_19
    > is
    > > copied
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybcustom_2
    > > 0 is copied
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybdelprocs
    > > _21 is copied
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybextended
    > > _22 is copied
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybrmaudit_
    > > 23 is copied
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\CIM_Process
    > > or_24 is copied
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ne
    > > twareOperatingSystem_24 is done with 142 0x03010e01
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\indytoprom_
    > > 26 is copied
    > > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Post_30
    > is
    > > copied
    > > Starting Schema Migration
    > > Adding the extra db spaces...
    > > SELECT file_name FROM SYSFILE WHERE dbspace_name LIKE '%CIM9%'
    > > has the results
    > > File_NAME=mgmtdb9.db
    > > dbfile's base directory =
    > > SELECT file_name FROM SYSFILE WHERE dbspace_name LIKE '%CIM10%'
    > > CREATE DBSPACE CIM10 AS 'mgmtdb10.db'
    > > Totaltime taken for Schema Migration : 149
    > > Migration Exception Message->Could not add the dbspace..ASA Error -121:
    > > Permission denied: unable to create the dbspace file "CIM10",
    > > SQLState->42501, ErrorCode->262
    > >
    > >
    >
    >

  • Can no longer print from Photoshop CS^ have upgraded drivers error message reads There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."

    I have upgraded my iMac to Yosemite but now my two Canon Printers no longer print from Photoshop CS6. I have upgraded the drivers. All other applications including Lightroom are fine. I am receiving an error message as follows:"There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." How can I get the OS to return a list of printers to Photoshop when Photoshop requests a list.

    Have you printed to this printer from 10.10 before?  If so, check your connections.

  • Can't update iPod Touch SW from 1.1.3 (with software upgrade) - 1602 error

    I get errors trying to sync since the 1.1.4 upgrade became available, plus I do connect and sync, I can't update to 1.1.4: "The iPod could not be updated. An Unknown error occurred (1602)." Has anyone else encountered this? Any solution ideas? Any way to contact Apple tech support on this?

    I think that this is the error you get when the sync fails due to lack of sufficent US power (or hyperthreading - see other discussions).
    I solved it in the short term by unplugging as many USB devices as I could, restarting everything including powering off the IPOD then recovering the IPOD. The longer term solution was to buy an external USB hub. I have an Intel motherboard. I'm not sure if other motherboards have simular issues.

  • Trying to install an upgrade but Error 7 is preventing the install from going thru. I am logged on as Administrator running windows 8.1 on my pc.  Help

    Trying to install an upgrade of iTunes on my pc but Error 7 (Windows 193) is preventing the install from going thru. I am logged on as Administrator running windows 8.1 on my pc. I have repaired and uninstalled a couple times  These are my warnings
    "Service 'Apple Mobile Device Service' ('Apples Mobile Device Service) failed to start. Verify that you have sufficient privilege to start system services."  [Abort Retry Ignore ]. "ItunesHelper was not installed correctly "

    If the above steps haven't helped try installing:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for a 32-bit core program, similar to previous 64-bit releases of iTunes, or roll back to:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    as appropriate.
    tt2

  • Third party contact form widgets no longer working with upgrade - PHP errors

    PHP seems to be even more screwed up with the latest update/upgrade to Muse.  The previous upgrade started producing the following error message when I uploaded my site via FTP:
    "1 Warning - Connection to PHP file failed. Unable to check if this web server supports PHP needed by Muse forms. Be sure the domain name entered in the FTP upload dialog is correct."
    However, everything worked and in participating in some queries here, it seemed to be an oddity versus anything serious (things still worked but an error message popped up for no real discernible reason)
    Since the latest update, however, widgets that I have from two different companies for the purpose of emailing me through the website, sending messages, etc, are no longer working and the following message is displayed upon hitting "submit"
    " Form PHP script is missing from web server, or PHP is not configured correctly on your web hosting provider. Check if the form PHP script has been uploaded correctly, then contact your hosting provider about PHP configuration."
    In checking with my web host provider, I was told
    "the page appears to use the script form-u31652.php which does exist on the
    server.
    Unfortunately that error is not specific enough to point us in the right
    direction. PHP is indeed working on the server. However, looking at the
    apache web server error logs I can see that the contact form appears to be
    looking for a file that does not exist.
    To trouble shoot this issue you will want to work with Muse to determine
    why the sites coding is looking for the file
    /usr/home/NAME/public_html/WEBSITE.com/null."
    Any ideas what this means and how to solve this would be great. I've tried re-uploading the entire website, figuring that maybe something wasn't being uploaded via "Modified Only" but it still is happening
    Thanks!

    That isn't what ended up fixing it, Sanjit. Thanks to this article PHP FAQ for Muse Synchronized Text and help from an online representative from Adobe, was able to troubleshoot with my web provider. Turns out the problem was that a while back Muse deleted the fcgi-bin directory (probably during the previous upgrade, as that is when the PHP errors started to surface with me and others). And it was never put back by Muse even during a clean/full reupload of the website.  Had to have my web provider do it manually.

Maybe you are looking for

  • Audio headphones problem

    Good morning, unfortunately I'm here to ask your help. When I plug my headphones in the jack connection, I continue hearing the sound from speakers. If I go to settings, then audio I cannot see headphones listed in output. This is strange because the

  • Coherence Extend C++

    We are running a 36 node storage cluster with 9 proxies. The application written in C++ starts to get timeouts from Coherence extend which we have set to 5s around 30 minutes into heavy put load. At this point it will fall over as it continues to fal

  • BAPI Sales order create - Ship to party Error

    Dear All, I have an issue with BAPI_SALESDOCU_CREATEFROMDATA1. I need different ship to party's on the items , irresspective of the header ship to party. Currently the order is getting created with the same ship to party for all the items , same as t

  • Can't Open 5 File in Captivate 4

    I have a trial copy of Captivate 5 on my personal computer and I'm trying to open the file I created in 5 in Captivate 4 on my work computer.  I can't get the file to open in 4 and I don't know what to do.  The trial is saving the file as cptx and it

  • HT1495 How to split an iTunes account

    I am currently sharing an iTunes account with my daughter. Now that she has an iPhone, iPod and her own debit card, I would like her to create her own apple ID but I don't want her to lose all of the music she has already purchased. Is there a way fo