2.08.0002 Beta Drivers will not install on Audigy 2 Platinum

I am attempting to install the new beta drivers (SBA2_PCDrvBeta_LB_2_08_0002.exe) to gain OpenAL support and better Battlefield 2 performance but I have not been able to. Upon installing the drivers, the system will freeze. I have left it for over an hour, and it remains frozen. On occasion, the installation would work, but then would freeze after I log in again after the reboot. Only way to recover is to reboot in safemode and remove the drivers.
I have tried removing the old drivers entirely (and cleaned the system with Driver Cleaner Pro). I have also tried extracting the driver set and letting windows do the installation, and I have also tried running the secondary setup.exe installer in the driver directory. I also tried changing my video driver, in case that was causing a conflict. Each installtion instance began with all of the Creative-related drivers cleaned by Driver Cleaner Pro.
I checked my msinfo32 and there are no IRQ conflicts or sharing related to the Audigy 2. Overall, I think I have attempted this installation about 5 times.

*bump*
Any ideas guys?

Similar Messages

Beta cs6 will not install error bridge running but it is not running

Can not install cs6 error close bridge but bridge is not running

I am running windows 7, I check task manager and bridge is not running
Date: Mon, 26 Mar 2012 19:36:19 -0600
From: [email protected]
To: [email protected]
Subject: beta cs6 will not install error bridge running but it is not running
    Re: beta cs6 will not install error bridge running but it is not running
    created by Howard Pinsky in Photoshop CS6 - View the full discussion
Which operating system are you running? It might still be running in the background. You may want to check your Task Manager or Activity Monitor. Or better yet, if you feel uncomfortable with that, try logging out of your user account, then back in. That might kill any stray processes.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4293603#4293603
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4293603#4293603. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop CS6 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Canon 5030 advanced printer drivers will not install on my hp dv6000 laptop

my company is trying to install their canon 5030 advanced printer drivers onto to dv6000 laptop so i can print at work and they will not install. there are no error messages it just won't install. i do not, cannot get a new laptop. i need to make this work. HELP
my os is xp sp2 with most recent updates installed.

You would probably get better luck with your question if you post this on the HP Notebook board as this board mainly deals with hp printers and the Notebook board will help with your HP Laptop.
Good Luck !
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Drivers will not install from original disk

Ok, so i have a early 2008 MBP, which i just installed Boot Camp on. After a tedious install of windows, I got it to work, now to have the drivers get messed up. What happens is it will start installing the Drivers and then usually (it stops at different times) will get to the audio drivers before it just spins the disk for about a second then stops, then spins it again, and repeats this process infinitely or until I turn off the computer. The disk will not eject, and boot camp install will not end. Can you help me get past this, because I really would love to finish the install! As i said the farthest it has ever gotten is the Audio drivers which is where it usually stops but sometimes it will stop earlier than that, but Audio is the most problematic because it has never been able to go past that.

Manish, thanks for your help.
Tried similar in Windows 7 with no effect. Also tried Adobe Creative Suite cleaner tool via http://www.adobe.com/support/contact/cscleanertool.html It installs ok on my laptop, so doesn't appear to be a location issue, but will not install on my workstation. Manual installation of AAM completes but after typing in user/pass it says 'download error, contact customer service'. Photoshop CS6 beta installed and functioned ok and I had CS4. Tried uninstalling both, same issues. Adobe Lightroom 3.6 is still installed and functions.
I also tried someone's suggestion of installing the trial of something so it would install the Akamai Netsession download manager. This completes and when I launch the AdobeApplicationManager.exe I can see it spawn Netsession which then hangs and can be killed initially, but zombies for a while ( cannot be killed ). Packet trace ( https://twitter.com/#!/DaSpadeR/status/201295684022960128 ) appears to show initial handshake and then nothing. -John Spade

Windows 7 drivers will not install for Printsmart B209a

Ok, I have tried to solve this for the better part of 2 days on my own.. I have tried every solution I can find by google and forums..
In the device manger it show that my printer drivers are not installed, when i try to install them Windows tells me the drives are not digtally signed and I and not it's not sure they are committable with my printer.. When I tell it to go ahead and intestinal them it tries then tells me it can not due to one of the above..
I have uninstalled the drivers and reinstalled them so many times I have lost count.. I have used a uninstaller to make sure I got every little piece of the driver I can find..
Now when I try to install them, it hangs at about 89% and tells me it is waiting for a SPL response from the printer.. and that never happens.
So can someone please help me with these two problems..
Thanks in advance for your knowledge, time and effort..

Make sure that you run the correct OS bit version download for your computer. Do you have 64 bit or 32 bit win 7? did you install software by cd or online?
if it hangs at 89% , that means your firewall is limiting the installation.
what is the brand of your anti-virus software?
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

Error code 31, Drivers will not install correctly

I am using the following NI PXI cards in a Chroma chassis:
8360
5112 or a 5114
7352 (I think)
I have a Toshiba laptop, Satellite L305D-S5934 running Vista, on which I am trying to install the driver package. Everything installs fine, with no errors. When I plug in the expresscard, turn on the chassis, and then boot the computer, the 8360 installs and is recognized in Device Manager and in MAX. The other two cards will not install. I get an error code 31 in device manager on the PCI-PCI/PXI bridge stating that Windows cannot load the driver.
I have another Toshiba laptop, Satellite L305D-S5895, which specs out about the same, also running Vista, which runs with no problems at all with the same card, cable, and chassis. Any previous experience with this issue? Thanks in advance for any timely help you can offer, and I'll gladly supply you folks with as much info as I can. Attached is a screen shot of the device manager with the flag and the error message.
-Kyle Jackson
Attachments:
DevMgr.jpg ‏141 KB

Hey Kyle,
It seems like the ExpressCard isn't working properly, based on what you've told me. You say that the ExpressCard shows up properly in Device Manager after installation, but based on that screenshot it looks like it isn't showing up correctly. Is there an NI-MXI entry in device manager after you install? Take a look at this : Developer Zone : What Laptops Have Been Tested with NI's ExpressCard-MXI for PXI and PXI Express?
In looking at this article, I don't see either of the two laptops you mentioned as ones we've tested or have had customer's test. That being said, there might be an issue with the S5934 and not with the S5895. I looked into it a bit more, and the two laptops have completely different chipsets, so it's reasonable to say that one laptop might work and one might not. There are a couple things you'll want to do to try and fix this:
First, make sure you have the most up-to-date BIOS for the S5934. If you still encounter errors, you might want to sign up for the beta program of the NI MXI Express Bios Compatibility Software, which might be able to solve any BIOS incompatibility problems. You can sign up at www.ni.com/beta for that software.
Justin E
National Instruments R&D

Ipod Touch ( 2nd Gen ) Drivers will not install on my computer! HELP!

We are trying to dump my 2nd generation Ipod and reload everything in it so that I can give it to my son to use- But the drivers are NOT installing in my computer, any ideas why?

What do you mean?
See:
iOS: Device not recognized in iTunes for Windows
I would start with:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

HP Deskjet 3920 advanced printer drivers will not install on my laptop

I can't share HP Deskjet 3920 with Win 7 64 bit cause can't install advanced printer drivers for x64 on Win XP, error message like: "need some drivers from Windows XP CD-ROM" - and can't find it there (need for sRGB.ICM file).
If I manually point this file, the install process loops endlessly.
Spoiler (Highlight to read)
Spoiler (Highlight to read)
Spoiler (Highlight to read)

Hi Yaugen,
Try these instructions. The main task is to get Windows XP and Win7 to share resources.
Step one: Windows 7 Homegroup must be setup
Printer sharing must be setup in the Homegroup settings, if one of the computers in the network is using Windows 7.
1. Click Start
2. Click Control Panel
3. In the upper right corner ensure that View by has Large icons or Small icons selected.
4. Click Network and Sharing Center.
5. Click Choose homegroup and sharing options
6. If the Homegroup is not setup, you need to set up your homegroup before continuing.
Step two: Set the Workgroup on each computer
Each computer on the network must be set to the same Workgroup. The workgroup name needs to be changed from the default to a new name.
Windows XP:
1. Click Start.
2. Right click Computer and then left click Properties.
3. The default Workgroup is WORKGROUP.
4. The name of the Workgroup should be changed from the default.
5. In System Properties, click the Computer Name tab.
6. Click the Change button.
7. Enter the Workgroup name that is used by your entire network. If you are changing the Workgroup name, use the same name used in Windows 7.
8. Click OK.
9. You must restart your computer for the change to take effect.
Windows 7:
1. Click Start.
2. Right click Computer and then left click Properties.
3. The Workgroup is listed in System Properties.
4. The default Workgroup is WORKGROUP.
5. The name of the Workgroup should be changed from the default.
6. Change your Workgroup in Windows 7 by clicking Change settings.
7. Click the Change button.
8. Enter a new Workgroup name that will be used by your entire network.
9. Click OK.
10. You must restart your computer for the change to take effect.
Step three: Setup a share account on each computer in the network
Create a common share account on each of the computers, including the computer that is sharing the printer to the rest of the network. This share account must have the same name and password on each computer.
If you decide to use an existing account that appears on each computer all ready, this existing account must be password protected. If you do not want to password protect your default login, create a new share login as described in the following steps.
Windows XP
1. Click Start
2. Click Control Panel
3. Click User Accounts
4. Click Create a new account.
5. Enter the same user account name created as the share account on the Windows 7 computer.
6. Click Next.
7. Under “Pick an account type”, select ‘Computer Administrator’.
Note: In Windows XP you must select Computer Administrator in order setup a printer.
8. After you new account is created, select it under ‘pick an account to change’.
9. Click Create a password
10. Enter the same password used when creating the share account on the Windows 7 computer, following the directions on the screen.
11. Click Create Password button.
12. Log off your current user account and log into the new share account to activate it.
13. Once the computer is ready after logging into the share account, you can log off the share account and back into your regular user account.
Windows 7
1. Click Start
2. Click Control Panel
3. In the upper right corner ensure that View by has Large icons or Small icons selected.
4. Click User Accounts
5. Click Manage another account
6. Click Create a new account
7. Select Standard User
Note: The account created should be created with the lowest security setting necessary. Creating the share account as an administrator is discouraged.
8. Enter a new user account name. Use a name that is easy to remember as the account used for sharing resources across your network. For example: ‘ShareAccount’
9. After your new account is created, select it under “Choose the account you would like to change”.
10. Click Create a Password
11. Enter a new password, following the directions on the screen.
12. Click Create Password button.
13. Close any remaining opened windows, making a note of the new account name and password as you will need to create identical accounts and passwords on the other computers on your network.
14. Log off your current user account and log into the new share account to activate it.
15. Once the computer is ready after logging into the share account, you can log off the share account and back into your regular user account.
Step Four: Share the printer to the network
The computer that has the printer attached and installed by USB must have the printer shared to the network.
Windows XP
1. Open the printers and faxes folder in Windows XP.
Note: A hand symbol under the icon for the printer indicates it is already shared to the network.
2. Right click on the printer to be shared to the network.
3. Left click on Sharing.
4. Click “If you understand the security risks but want to share printers without running the wizard, click here”.
5. Select “Just enable printer sharing”.
6. Click OK.
7. Select “Share this printer”.
8. If the Share name is acceptable, click OK.
9. If you want to change the Share name, enter a new name. Click OK.
Note: If the Share name entered is longer than 8 characters, you will get a warning that the printer will not be accessible from MS-Dos computers.
Step five: Install the appropriate software for your printer
Install the printer software on the other computers on the network that will need to access the shared printer. Install the correct driver for the printer model for each computer on the network. Not all printers will need to have a driver installed, only newer printers.
1. Check for available drivers – visit the HP website and download available drivers.
Note: Even if you have an install CD for your older HP product, there may be an updated driver for your printer.
2. Launch the driver setup by double-clicking on the downloaded driver.
3. If the driver install process requires you to attach the printer USB cable to continue, click cancel instead. This will roll back the install, but it will leave the driver files installed.
4. Select the USB connection type. Look for the checkbox labeled “Connect later – Do not connect to the printer now. I will connect it later”.
Note: You might have to select USB connection type before the checkbox is visible.
5. Complete the install without attaching the USB cable.
6. After the software is installed, delete any icons created on the desktop. They will not be linked to the shared printer and will only result in errors if used.
Step six: Install the shared printer.
Note: Computers that are not sharing a resource to the network may not show up by name when viewing the entire network.
Windows 7
1. Click Start.
2. Click on Computer.
3. In the lower left pane, click on Network.
4. Double click on the computer that is sharing the printer.
5. Enter the name of your share account as the “User name”.
6. Enter the same password created for the share account.
7. Check the box labeled Remember my credentials.
8. Click OK.
9. Right click on the printer, left click Open.
10. Windows will find the previously loaded driver for the printer and complete the install.
I was an HP employee.
Please mark the post that solves your problem as "Accepted Solution"

C6180 All In One Photosmart. Software and drivers will not install on Windows 8.

C6180 All In One Photosmart
on
Windows 8 64bit
Acer Aspire V5-552PG
AMD A10- 5757M
Radeon HD 8750M dedicated
Software and drivers package will only unpack but not install.
When the unpacking bar reaches the end, it disapears without any following actions.
I have of course tried it over again many times, and I have deleted the download and redownloaded it again but the same happens every time.
Any idea on how to solve this?
Sincerly
FLFO

HI FLFO:
I have done some research on your post. I have found a document with steps to help resolve the stall you're experiencing during your printer installation.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00836418&tmp_task=solveCategory&cc=us&dlc=en&lc...
Happytohelp01
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Drivers will not install on TouchSmart 610-1030f

I am on a family TouchSmart 610-1030f with Windows 7 64-bit and cannot get the graphics drivers to update at all. They have not been updated since January 2011. The graphics card is an Intel HD Graphics Core i3. I have tried through the HP and Intel websites and both times I get an error. Through the HP website, it only says something along the lines of "the software did not install (259)." Through the Intel website, I get an error saying "Your computer does not meet the minimum requirements to install this software" or something like that. Windows is completely, fully updated, so that is not the problem.

Hello @ydnube,
I understand that you are having issues installing an update for your graphics on your HP TouchSmart 610-1030f Desktop PC. I am providing you with a link to the HP TouchSmart 610-1030f Desktop PC Drivers page where you will note that there are no updated drivers for your computer running Windows 7 64-bit. The only drivers available are the ones that originally came with the computer. I suspect that the reason you cannot install the drivers you are trying to install is because they are not for your computer and the operating system is not permitting you to install something that is not made for the hardware you have.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

ScanGear MX700 Drivers will not install on new iMac

I am new to Mac, so I'm not sure if I am missing a step. Using the install disk that came with my new Canon MX700 I installed the scanner drivers in the series:
ScanGear MX700 series 1370.mpkg
IJ Scanner Selector 220.pkg
ScanGear MX700 series 1370.pkg
ScanGear MX700 series Network 1370.pkg
After I load each package, I allow the computer to restart to complete installation as suggested after each download.
I've turned the printer off and on (using USB to connect to iMac). When I attempt to scan using the menu on the Canon, a window pops up: "Scanner is not selected. Click [Scanner Selection] to select scanner. Scanner driver will be closed." When I select "Scanner Selection" another window opens called "Canon IJ Network Scanner Selector" but there is nothing in the Network Device List to select. Under TWAIN Data Source Name is "Canon MX700 series Network", but there is nothing with a MAC Address. I am unable to select anything and that is as far as I've gotten.
HELP!

If you are using the control panel on the MX700 to scan, then after you press the SCAN button, you are prompted to select the connection method > Local (USB) or 'LAN Connected'. Based on the message you are getting, and since you have the MX700 connected via USB, I would guess that you are selecting 'LAN..'. If at this stage you use the arrow up or down key to select 'Local', then I believe you will not get the message.
If you are scanning from your iMac, rather than using the MX700 Control Panel, then you do not need to configure the IJ Network scanner since you have the MX700 connected via USB.
You should be able to open an application like Image Capture to check the USB connection. If a message stating that 'No Image Capture device is connected', then click on 'Devices' and then 'Browse Devices'. The 'Image Capture Device Browser' should appear showing the MX700 under TWAIN Data Sources. If you select this entry it should show it as connected. If it doesn't show it as connected, then you could have a problem with the USB cable. A previous post had a Canon user capable of printing but they were unable to scan and the included USB was the fault.
If the connection is okay you should be able to scan using the Image Capture application. After the prescan is performed, you must select a portion of the displayed image using your mouse by dragging from one corner to the opposite corner. Now the SCAN button will be available.
Note also that you can use the Preview application to scan.
HTH
PaHu

New Vista Drivers will not install/w

Ok, so i uninstalled my old creative beta drivers through the vista program uninstall, along with uninstalling the device within device manager. Then, I rebooted the computer and ran the new driver exe. once it went into the install program after unpack it said:
"you have previously installed drivers without rebooting, please reboot and try again"
so i reboot again (even though i have yet to install anything.....same problem...
I tried deleting my windows temp folder and still no luck.
Then, i tried copying the unpacked folder "CF000" or whatever its called and directly tell device manager to grab the drivers from there.
Now it lists the x-fi in device manager but with this error after restart:
"This device cannot start. (Code 0)
Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available."
PLEASE help. Now i have no sound and i can not install the old beta drivers because they now give me the same crap "you have tried installing without reboot bla bla bla"

Ok, so I finally got it to work. I am not sure what i did differently to be honest. I did the same thing that I did 0 times before: erased windows temp folder, erased any folder labeled creative after running a search, uninstalled the device via device manager... and suddenly the install ran to completion. Does my audio work now? yes. Was it probably the biggest pain I have ever had to install drivers? yes, by far. I am not trying to slam creative because hey, at least I have working drivers.... but oh man was it a pain in the ###. I can see why people go for on board audio now...

IPhone drivers will not install (windows 7)

Haya there,
I have around 1100 photo's on my iPhone and I was planning to save some on my harddisc so I could free up some space on my phone itself.
Easiest way to do this is plug it in, open the iPhone as a flash drive and drag and drop really.
Now here is my issue:
When I plug in my iPhone it says the drivers have failed to install.
the "Apple Mobile Devive USB Driver" gets installed without any problems. However when it gets to the installing of the iPhone itself it fails.
Meaning, I CAN acces my iPhone trough iTunes just fine. Just not as a flash drive on windows.
Things I have tried:
I've uninstalled both the iPhone and apple mobile device drives, reinstalled them but with the reoccuring same error.
I've uninstalled and re-installed iTunes, downloaded it from the website to make sure I have the newest version.
I've uninstalled and re-installed my USB hub drivers as this was something someone mentioned while I was googling the problem.
I've tried plugging it into different USB ports on my pc, but with the same error when it tried to install the drivers.
I've restarted my pc multiple times in the vein hope that the magic of the restart would cure all.
Noticable:
I've plugged in my phone onto my old laptop (windows vista) and the phone got recognised there without problems. So the problem will be within my desktop, not the phone or cable.
- I use a desktop running Windows 7 Home Premium 64 bit with Service Pack 1
- I'm running iTunes version 11.0.2
I know I can transfer the photo's to my pc using my photostream. At this very moment Im transfering the photo's to my laptop as it is working on there. Where Ill dump them on my external harddisc. But I still want the problem fixed for next time. I should be able to just plug in my phone and get acces to my photo's even when there is no wifi around or when I dont have my laptop at hand.
Thank you in advance for your help

Having more storage in your iCloud account does not expand the storage on your phone. If you don't have enough free space on your phone to update, you'll have to delete some data to do so (such as deleting all your music, then syncing it back to your phone after you update).
Also, backing up your photos to iCloud only allows you to restore them to your phone later if you ever need to, it doesn't allow you to access the photos from iCloud. It also doesn't give you more space on your phone as it only backs up your photos, it doesn't delete them from your phone. If you want your photos in iCloud, turn on photo stream. This will actually take more space on your phone, not less, as you will get a duplicate photo in your photo stream album to the one in your camera roll.
If your storage isn't increasing as you delete data from your phone, try deleting your iCloud backup and backing up again.

MSI K7N2 Delta 2 - nvraid drivers will not install

I have recently upgraded my mobo to MSI K7N2 Delta2 Platinum. I use Athlon 2700+ running at 2.157 GHZ, 512 MB Samsung PC3200, 128 MB ATI Radeon 9700 Pro, 3 WD Hard Drives (Main bootable HD 60 GB and 2 identical 80 GB HDs configured as nonbootable RAID 0). I am running Windows XP PRO (OEM) with SP 1A. I did not have any problems with configuring RAID 0, however I cannot install drivers for it. Windows keep refusing to accept drivers and computer keeps rebooting itself when I try to install those drivers. I emailed MSI, but I got no reply as yet. Does anybody have any experiences similar to mine? Any solutions? Help will be greatly appreciated.

Some additional information. I did not reinstall Windows after replacing the old motherboard. My previous mobo was also from MSI. It was MSI K7N2 Delta - ILSR. When I installed my new motherboard, Windows would come up without any problems. I had a problem with driver installation disc. Setup would not run, well, I take it back it did, but in some kind of invisible mode. What I mean is that the MSI Driver and Utilities Setup window would disappear after a few secionds and when I clicked on setup icon again another window would pop up telling me that the set up was already running. I went around that problem and installed all drivers from within individual folders as I was able to explore the Setup disc. The only driver I was not able to install was nvraid. I hate to reinstall Windows anew, because Microsoft treats one like a criminal, if you call them too often, asking all kinds of questions befor they decide to activate the OS. I did a lot of upgrading within last 2 months and this would be my 4th call to Microsoft if I had to run fresh installation. I am wondering if I could just remove old drivers using either Driver Cleaner or going to INF file and deleting the old drivers from there?

MSI GeForce2 GTS Drivers will not install

When trying to upgrade drivers for MSI 8815 VGA (GeForce2 GTS) using either the Nvidia or MSI download Windows 98 stops booting and displays this error in the dos screen:
While initializing device IOS:
ERROR: Real mode system memory allocation failed.
I have tried all the drivers available for Nvidia cards and nothing will install later than version 21.85. I don't have any versions later than that except what is available now for download.
Is there any way to get around this problem?

No, but RAM is 512MB though I don't have any problems with the cache size, etc. or recognizing all the RAM. I considered testing removing one of the sticks of ram just long enough to install the video drivers but wonder whether the same problem would happen as soon as the stick was put back in. The note on Microsoft web site refers to Windows ME and the cache size which again don't seem to be a problem here.

2.08.0002 Beta Drivers will not install on Audigy 2 Platinum

Similar Messages

Maybe you are looking for