2.1.1 Will Not Run At All

When Aperture 2.1.1 initially came out I installed it, but it immediately crashed every time I tried to start it up. So, I went back to 2.1. I thought I would try to update again tonight, but this time I repaired the permissions immediately before and after installing the program. Plus, I made sure all of my software was up-to-date before installing 2.1.1. Well, same problem: immediately crashed on start-up. Then I deleted my preferences and the Aperture folder in Application Support. Tried again and it still crashed on start-up. I reinstalled 2.1 from my back-up drive and it is running fine again. Any suggestions for getting 2.1.1 to work?

{quote:title=Dan Donovan wrote:}
Aperture is a great program and you made a wise decision buying it. {quote}
I hope that you are right. I spent a lot of time researching my options and even more time "pre-learning" Aperture before I downloaded the trial. I know that complicated software can come with various quirks and I can usually live with it in the hope that a future version fixes things. Incremental updates that can hose basic operations are a bit more worrisome...
Oh Well, I'll just be more cautious just like when it comes to major OS upgrades. I ran Leopard from an external drive for two weeks before I copied it to my main Mac; I could always do something similar with Aperture. Or just wait a week or two for the reports to filter in on the Mac forums... And I'm going to use Referenced Masters so my originals are outside the Library and I can easily access my external image editor to work on an image.
Message was edited by: MisterMojo

Similar Messages

  • The Elements 12 Mac disk works fin - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive.  I cannot find any place to tell me who to CALL to ask for a replacement!

    The Elements 12 Mac disk works fine - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive.  I cannot find any place to tell me who to CALL to ask for a replacement!

    Hi Samcat,
    You can use a download instead of the disk as an alternative: Adobe - Download free trial version Adobe Photoshop Elements 12 | Adobe you can license with your serial
    Please test the disk in another windows machine to check if it's caused by the drive or the disk. If you tested with 2 drives please start a support case, i assume Adobe will only provide downloads at this point. They are the same as the trials. If you still need a disk you can burn the trial to a disk as a backup disk. Good luck!

  • FF will not run Amazon all of the sudden

    FF will not run Amazon Just started all of the sudden IE will run Amazon

    Reload web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • I upgraded to FF 3.6.10 and now FF will not run at all. (Safe Mode will.)

    I upgraded to FF 3.6.10. I have tried opening/starting FF from the Start Menu, from the Desktop FF Icon, and from the Program Folders Mozilla folder.
    When I try to run FF, it will not start. In the Task Manager, FF shows up in the list of Processes -- for 1 second or less, and then disappears.
    FF Safe Mode, however, will run.

    If you do not have the original install DVDs, use the Aperture Trial installer instead:
    Try if this download link for the trial version still works: if yes, you can unlock it with your serial number:
    http://appldnld.apple.com.edgesuite.net/content.info.apple.com/Aperture/061-8328 .20101020.AprE3/ApertureTrial3.1.dmg
    Regards
    Léonie

  • Firefox will not run after System restore or running in compatibility mode for windows 98. How do I fix this? I already tried all other solutions on this site.

    I was running Firefox fine just yesterday. I screwed up the registry a litle while removing an installed program completely, so I restored the system and everything appeared to work fine. I then decided to play an old video game, Return to Krondor, which was made back in 1998, so I ran the program with no other programs running in compatibility for windows 98. After finishing the game, I closed it and put the computer in hibernation mode. I come back today and firefox will not run at all. It is not running in the background and there are no programs running. There are no services running which could interfere with it. I think somehow Firefox may think I'm in compatibility mode still, but I have no idea.
    I'm running windows Vista 32 - bit with an AMD 2.4ghz processor, 4gb ram on an Emachine computer. I have already tried system restore, restart, processes etc. Nothing works. I can still run Internet explorer and all other programs.

    The person that I was assisting, has Windows 7 which has 64 bit system. Her browser was IE 10.
    Was IE11 ever offered (or installed) via Windows Update?
    Is her computer currently fully-patched at Windows Update?
    Is Adobe Shockwave Player v12.1 (or higher) installed on her computer?
    Is Adobe Flash Player v15.0.0.189 (or higher) installed on her computer?
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Troubleshoot Shockwave Player installation for Windows
    http://kb2.adobe.com/cps/403/kb403264.html
    You will find support for Shockwave Player in this forum:
    http://forums.adobe.com/community/webplayers/webplayers_shockwave
    ~Robear Dyer (PA Bear) MS MVP-Windows Client since 2002 Disclaimer: MS MVPs neither represent nor work for Microsoft

  • Fire Fox v3.6.3 will not run in normal or safe mode, also will not uninstall

    FF v 3.6.3 for windows vista will not open and run in normal or safe mode, FF will not uninstall from folder or add/remove programs, tried to reinstall from Mozilla site did not work. Internet Explorer also will not run and crashes. I am using Safari it runs fine no problems. FF has been crashing for about a week unexpectedly but will reopen and run, but will not run at all now..?
    == Crash ID(s) ==
    ID: e3f78c3f-b182-44a9-8ef6-ca84c2100617
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/531.21.8 (KHTML, like Gecko) Version/4.0.4 Safari/531.21.10

    From the Crash ID information, it seems this is related to the AVG antivirus, version 8.5. If possible, please try updating you AVG installation (the program) to latest version; according to [https://bugzilla.mozilla.org/show_bug.cgi?id=547210 Bug 547210] AVG has released an update May 17. to AVG version 9 that should fix this problem.
    Please let us know if this fixes the problem with Firefox crashing.

  • HT5654 Just tried 3 times to update iTunes on my PC running Vista.  There was an error.  It stopped the installation.  Now iTunes will not start at all.  The error message tells me to reinstall which I tried but did not work.  What should I do?

    Just tried 3 times to update iTunes on my PC running Vista.  There was an error.  It stopped the installation.  Now iTunes will not start at all.  The error message tells me to reinstall which I tried but did not work.  What should I do?

    Hello, Jdragone. 
    Thanks for the question.  Start with completely uninstalling iTunes and all of it's components in the order specified in the article below.  Once this is done, download and install iTunes.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
    "The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
    http://support.apple.com/kb/TS3704
    Cheers,
    Jason H.

  • Firefox 4.0 will not open at all. It shows that the process is running in the task manager but will not open the window even after closing the prcess and restarting.

    I have had firefox since an earlier 2. version and have been able to upgrade as normal. After the installation is done it will not open at all. I have restarted and even uninstalled all previous version .exe and still nothing. I am using windows 7 OS. I am still running 3.6.8 and would love to see the new one running on my laptop.

    hello, this crash is caused by Websense Endpoint security software that is running on the system. please try to install all the updates for this program that are available...

  • I have a Mac running OS 10.5.8. I downloaded Firefox 4 and not the program will not open at all. I am also unable to download the previous version that was running fine. I'm using Safari to contact you.

    I have a Mac G5 running OS 10.5.8. I downloaded Firefox 4 and now the program will not open at all. I get an error message that reads --
    "You cannot open the application 'Firefox" because it is not supported on this architecture."
    I am also unable to find a link to download the previous version (3.6) that was running fine. (I'm using Safari to contact you.)

    Same proble here, although the Firefox system requirements says it is OK to have PowerPC G3 G4 or G5 ( I have G5 2GHZ)
    My solution; very simply use timemachine to restore the previous Frefox 3.x
    worked great in 3 mns

  • Installed firefox 4 but will not run on osx10.4.how do i retrieve version 3.6 and all bookmarks etc

    i downloaded firefox 4 but did not notice that it required osx10.5 as my computer is running 10.4.11 installed program ok but when trying to open it i get message that it will not run on my system.
    how do i get back to 3.6 as firefox 4 appears to have deleted all the old files. can i retrieve my bookmarks etc and where can i download version 3.6

    You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
    Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

  • After refomatting HDD, reinstalling Vista plus service packs, recovering files from Microsoft backup and installing new copy of Firefox 3.6, Firefox will not run. Have deleted all old M0zilla profile folders and reinstalled Firefox again to no avail.

    After computer would not boot and could not be repaired, I reformatted the HDD, reinstalled Vista plus all service packs and updates, recovered files from Microsoft backup and installed new copy of Firefox 3.6. Firefox will not run.
    I have deleted all old M0zilla profile folders and reinstalled Firefox again to no avail.
    After intallation was completed, the automatic startup just placed a small box on the screen "Import wiz". This just sat there with no activity. After I closed this box, none of the Firefox start buttons would open the program -- just the blue rotating icon for about 2 seconds then nothing.

    Hi,
    Please try to rebuil the WMI repository.
    For detailed information, please refer to the blog below,
    http://blogs.technet.com/b/askperf/archive/2009/04/13/wmi-rebuilding-the-wmi-repository.aspx
    If issue persists, due to sfc doesn't work, could you try to repair your system with the installation disk?
    Best Regards.
    Steven Lee
    TechNet Community Support

  • Installed CS6 and all working except Photoshop. Says application will not run on this mac despite my having the necessary system requirement of OSX 10.6.8. Can anyone help please?

    installed CS6 and all working except Photoshop. Says application will not run on this mac despite my having the necessary system requirement of OSX 10.6.8. Can anyone help please?

    Hi - I have opened a second log with the same date and name and am now tracking down the problem.
    This seems to be the problem for me: Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5

  • Computer will not run iDVD at all

    My computer will not run iDVD at all. I try to start the application, and it bounces twice in the applications bar and disappears. I have tried to re-install it using the iLife '08 Install CD, but although the CD allows me to install the old themes, it does not allow me to install the iDVD application itself (yes, there is enough space). I have tried opening an iDVD file and exporting an iMovie to the iDVD application, but in neither of these cases will iDVD start up.
    Recently my iMovie HD application broke and so I used the iLife '06 install CD to get it working again. That custom install on that CD did not allow me to uncheck iDVD; hence, it is possible that iDVD '06 was installed over '08. Maybe this has messed up iLife '08 so it can't install the newest version over it? I am not sure, and definitely need some guidance here.

    I've had the exact same problem on my Powerbook G4. I did a clean install of Leopard, installed iLife '08 and after that iMovie HD '06. I couldn't uncheck iDVD either when installing iMovie '06. I solved it "the hard way" : uninstall iDVD with e.g. Cleanapp (http://www.synium.de/products/cleanapp/index.html), and then install iDVD again (just check iDVD in the list). And it works ...
    Apple should work on this: hundreds of people have the same problem (just look at all the posts in the forum and on google). I tried the Apple solution (http://docs.info.apple.com/article.html?artnum=306290-nl), but it didn't work at all.
    Hope this gets you up and running again.

  • I'm trying to sync Outlook calendar (office 2010?win 8) with my iphone 4s. All works well when running control panel manually but it will not run automatically after that. Anyone got any ideas

    I'm trying to sync outlook calendar and contacts via icloud control panel. Everything works when control panel is run manually but it will not run automatically after that. Anyone got any ideas

    I am having a very similar problem. Until 12 hours ago, I was using my recently replaced 4s (with iOS7) flawlessly, receiving emails and calendar info from Exchange (Outlook 2010). But starting last night, it all stopped. I have deleted and added the account several times, tried making simple changes (considering whether the username is case sensitive, or not, etc.) and cannot fix it. I have iOS 7.04. Interestingly, the first time I changed the case to lower case, it seemed to respond immediately, and downloaded many emails with no sender, no content, and with a 12/31/69 date. Yes, 1969. And then nothing happened. Help please!

  • Uninstall and reinstall hp7400 all in one to my windows xp computer and cd rom will not run

    I have a HP 7410 All in one, I uninstalled the software, when I went to reinstall the cd-rom would not run.  Do I need to update drivers.  My operating system is Windows xp 

    Hi @Alex322,
    Welcome to the HP Forums!
    I see that you are trying to reinstall your HP Officejet 7410 on Windows XP, and that the CD will not run. I am happy to help you with this reinstallation issue!
    I would recommend to download the software at this website, HP Officejet and Photosmart Full Feature Software and Drivers, and we will see what happens!
    Hope this helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Maybe you are looking for