2.1.2 update does not fix DVD Navigation issues :(

The FrontRow 2.1.2 update still doesn't fix the DVD navigation issues where sub menus on MANY DVDs are not navigable. Using the up / down keys on the keyboard or remote causes the Volume to change and not navigating the menus like it is supposed to.
This is a severe issue as it makes it impossible to play some DVDs or turn on the subtitles.

Yeah, I have experienced this as well. Ridiculous -- how could this issue not have come up in product testing by the time the software has reached version 2.0? The solution on Apple's end should be obvious. All 4 directional buttons must act only as directional commands when using a DVD, and all other functions (such as volume) can only be accessible by hitting MENU first to bring up a list of other options.
I'm all for simplicity, but this is the fault of the boneheaded 6-button Apple Remote. It requires their software to overload buttons with different commands depending on context, which is clearly an unacceptable limitation. They'll have to break down and roll out a proper remote with more discrete buttons one of these days and come to terms with the fact that shoehorning everything onto 6 buttons is not an elegant solution.

Similar Messages

  • Bridge update does not fix caching problems.

    Dear Adobe,
    The 5.0.1.23 update for Bridge CS6 does NOT fix the problem of constantly re-caching layered TIF files.
    I originaly reported the problem here on May 16, 2012.
    http://forums.adobe.com/thread/1007560
    At that time I also submitted a bug report via photoshop.com, and received an e-mail response from Adobe support confirming the problem had been replicated in their lab and promising a fix in the next update.
    I've since tracked several other reports of this bug and related cache problems.
    I assume that, at best, we will have to wait another 6 months or more for the next update. How can I assure this bug will be addressed?

    redcrown on guard wrote:
    The 5.0.1.23 update for Bridge CS6 does NOT fix the problem of constantly re-caching layered TIF files.
    At that time I also submitted a bug report via photoshop.com, and received an e-mail response from Adobe support confirming the problem had been replicated in their lab and promising a fix in the next update.
    Thank you for this bit of information. Maybe it means I can stop the deactivations/uninstall/reinstall/reactivate cycle to try yet another solution. And hopefully, this will stop the re-caching problem with other than tif files.
    regards
    *S*

  • 2.1 Update did not fix SMS tone issue

    I have been having the text tone issue as many others have. That problem being that when a text is recieved the phone will only vibrate. The 2.1 update did not fix the issue...imagine that.

    Hi. You're the first person who has posted about the phone only vibrating when getting text messages. Can you tell me more of the problems you are experiencing when receiving texts? I ask because I exchanged my phone twice already because after a certain number of texts, the audio alert for text messages stops and only vibrates. I thought it was the phone so Apple exchanged it but I'm still experiencing the same problem with this third phone.

  • Latest Update does not fix unresponsive settings

    I have upgraded to the latest version of the Flash Player for Mac OS X Lion (v10.3.183.7) and I am still experiencing the unresponsive settings screen.  I have made sure to completely uninstalled the prior verson, reboot and install the latest version.  When I attempt to click the settings menu... it does not respond to mouse clicks.  I have read that others have updated and still have this same issue.  What is the fix??

    This can normally be fixed by deleting the folders where Flash Player settings are kept.
    On Windows see http://forums.adobe.com/thread/892474
    Unfortunately I do not know where these are kept on a Mac, something 'Library'...?

  • IWeb update does not fix nav bar problem

    The subject says it. Downloaded 2.0.1 with hope, republished and uploaded pages, but nav bar still does not appear. Only black dot. Wish I could revert to previous version.

    I don't know if this will solve your problem but I had the exact same experience. I have a site which I publish to a folder and then use transmit to ftp to a server. I also have the same site published to .mac. The black dot problem was only affecting the non.mac site. After iWeb 08 update I noticed a scripts folder and a feed.xml file in the site folder which I'm sure wasn't there before??? When I uploaded this folder and file as well as the index.html file it solved my problem. I'm no expert and I'm not sure why!!! but it might help...

  • Alert the media: software update does not fix hardware flaw of droppd calls

    Hard not to be sarcastic...but did anyone actually think that changing the size and number of signal strength bars would change a hardware reception issue?? Signal strength still degrades and calls still dropping with the "death grip".
    Apple, PLEASE fix this *&^%$ phone!!!

    Hello @2020mh , and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are experiencing scan issues.  I would like to help.
    I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
    Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
    I would also suggest running your Apple updates:  OS X: Updating OS X and Mac App Store apps
    After the updates, I would recommend readding the OS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Latest Update does not fix Sleep when lid is closed.

    I updated my Macbook Pro Retina with latest fix for Sleep + Nap. Today on my way to work, I closed the lid of the Macbook Pro, and when I got into the office, I took it out my bag and it was running extremely hot! I was surprised, as closing the lid should put it to sleep and not consume so much power. This is extremely dangerous for such an expensive laptop and should be fixed asap, this is unacceptable Apple, please fix this asap.
    I run
    OSX Mountain Lion 10.8 (All UPDATES are installed)
    Parellels
    Carbon Copy
    Diablo
    No other custom software.
    Romiko

    You're not talking to Apple here. If that's what you want to do, call AppleCare.

  • NK1 update does not fix NG6 battery drain

    Just saying the biggest and most common problem wasn't fixed. NG6 sucks the battery and NK1 doesn't improve. Hard reset / factory reset is not an option. Changing from GPS High Accuracy mode should not be required. I was running that before the update. The only thing that helps somewhat is to go to the task manager and clear the memory on the ram tab frequently.

    hi
    they keep deleting my posts about that, but what helped me tremendously was simply switching off SIRI competely...
    My phone died within 4-5 hours (new, clean install, the third new hardware in a row)... and since I switched off SIRI it holds the battery for over 24 hours even if I use it a lot...
    told it to the Apple Store 'geniuses' today in Berlin, hopefully that info makes it into the next update.
    best
    ingo

  • ITunes 10.4:  my screen resolution goes down to 600 p.  The iTunes update does not fix it.  PC Drivers have been updated.

    I

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    If you have a 2G iPod. that can only go to 4.2.1. The 1G iPod can only go to 3.1.3.  I supose that you have one of those and by support, I think Apple meant that they will issue no more updates for those models.  The iPod will continue to work with iTunes.

  • Update does NOT fix External drive slowness

    I ran the update hoping it would solve the slowness issue when keeping your iPhoto Library on an external drive (mine being a Time Capsule).
    Well, it did not - and I may resort back to 08, that worked perfectly.

    I may have misstated this. The trial of Aperture was set, I believe, to use and save the photos in their original iPhoto locations (folders) on the same drive. I also was using 'show iPhoto browser' when trying this out.
    So while not using the actual library file it was still a good test of using the same amount of photos on the same drive....

  • The Url History in the address bar is not working anymore. Reinstalling/Updating does not fix this. How to I get this working again?

    I'm talking about the Address Bar.
    For example: You type in Google and it shows www.google.com etc. Because this is in your history.
    But this has stopped working since I emptied my cookies. But not my history. I also checked if my history is still there. Which it is.
    And I cant find out why at all.
    I'm sorry if I really can't give much info. But this is what I concluded. Seeing English ain't my native language. My google searches for this question seem to be either in the wrong direction or this is something that never happened before.

    Tools>Options>Privacy - Click the drop down menu under Location Bar and set when using the location bar, suggest to - History and Bookmarks.

  • Yosemite 10.10.1 update did not fix my wifi issue, did it fix yours??

    The discussion about wifi issues is nothing new since Yosemite came out.  Today I installed the latest update (10.10.1) which was to help with wifi issues such as your wifi dropping.  I have tried every remedy that has been posted and nothing has worked.  I constantly have to re-connect to my wifi network while on my computer.  I guess I will sit patiently until this is resolved.  I was excited to see the new update but after downloading and installing it, I see that nothing has changed.  I have an iMac (2013) and have never had internet issues until I installed Yosemite.  I hope the update helps you but it didn't help me.

    Hi everyone,
    I am trying to create a secure network on my MB air with OS X Yosemite?
    Any ideas?
    In the pervious OS version when you create a network on from the WIFI icon on the top of the desktop, there are
    1) network name
    2) channel
    3) type of password
    4) key in password.
    Now with OS X yosemite, there is only
    1) network name
    2) channel
    When the network is created there is not IP.
    I am trying to use "airserver" a third party app to help project my iPad air to my MB air.
    I am trying to do this when I am conducting the class and I would like to record my lesson.
    Please advise.
    My way of getting around this is to use Airport Express and create my own network that link MB air and iPad air.
    But i do not want to look like a gadget guys and bring so many hardware to class... haha...
    Hope someone have an alternative.
    Cheers,
    Andy

  • HT6065 This update did NOT fix the GMail issue!!!!!!!!

    Am I the only one who is still have GMail issues using the Smart Mailbox? I can't retrieve any of my emails on my GMail accounts let alone delete add and delete the account.

    I've been having this problem for a while myself, ever since after the first Mail update. Today's OS update didn't help either, and I just submitted Feedback to Apple, for the second time, having done it a few weeks ago to.
    I tried deleting the GMail accounts and recreating them, both from within Mail and then within the System Preferences panel. There doesn't seem to be a rhyme or reason. After initially opening Mail, it works fine and retrieves messages for a while, and then ... it doesn't. Choosing "Get Mail" won't retrieve any email, but choosing "Synchronize All Accounts" does. Also, if I perform any action beyond simply reading an email, it will retrieve the email from that mailbox. That is, if I reply to or delete a message, it retrieves any messages at that time too.
    It's REALLY annoying that two updates later, something which seems like it should be relatively simple still doens't work.

  • 10.1 Update Did Not Fix Sending Email Issue!

    after waiting for like forever for AT&T to release 10.1.0.2019, i heard rumors that it would fix the issue i was having with emails not sending while connected to WIFI but will send when not on WIFI.  well i am still having the same problem with 10.1 and have to disconnect from WIFI in order to send emails (not fun).
    in addition, i have already checked and my POP and SMTP ports [are not] blocked when connected to WIFI.  so what the heck is going on here?!  argh.
    Solved!
    Go to Solution.

    RobGambino wrote:
    Are you able to do anything else while your WIFI examples are like surfing the net facebook twitter etc ?
    yes i can do everything else just fine on WIFI.
    i am not using my home ISP, but i will try that when i get home. 
    i have already been down this road with BB Support asking me to connect at a coffee shop, restaurant, etc, etc.  they all exhibited the exact same resultant.  cannot send email but will send that waiting email once i switch off of WIFI.
    i forget to add that receiving email is unaffected. 
    port 25 is the smtp (outgoing) port, and port 110 is the pop3 (incoming) port.

  • QuickTime 7.3.1 Update...Does It Fix The FCP Issue?

    QuickTime was just updated again. does anyone know if this fixes the 7.3 problem that caused FCP to "lock up" for a few frames during import?

    William,
    See this post.
    http://discussions.apple.com/thread.jspa?messageID=5847657&#5847657
    7.3.1 Update Does NOT fix FCP problem, only a security update.
    FCP 4.5 and below is not compatible with QT 7.3. I guess this is going to force us to upgrade FCP, I will not do a downgrade like some people suggested.

Maybe you are looking for