2.1(3a) upgrade to support ESXi 5.5 Update 2

Anyone upgraded UCS B series to support ESXi 5.5 update 2 with Broadcom NICs?  Any issues with upgrade?

I can't find the Broadcom NIC on the Support matrix
http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html

Similar Messages

  • BSI Tax Factory Upgrade:HR Support packs

    Hi All,
    We are starting with upgrade of BSI tax Factory from 8.0 to 9.0. And as per SAP main note '1469858' for upgrade, the support
    pack required is 'HRSP61' but we currently have 'HRSP59'. Also, CLC 61 was applied for 2010 year end activities.
    So, with CLC 61 present, would it be possible to upgrade to 9.0 without upgrading to HRSP 61 ?
    In other words I want to confirm if CLC 61 includes the Tax Factory 9.0 updates.
    Thanks,
    Avinash

    Hi Avinash,
    I just updated relevant information for your query in the following thread:
    [*BSI 8.0 becomes obsolete August 31st 2011, 9.0 troubleshooting guide here*;
    Kind regards,
    Felipe

  • Can a Mac Pro (2.66 ghz duel core) be upgradable to support Thunderbolt displays and other devices.

    Can a Mac Pro (2.66 ghz duel core (4cores)) be upgradable to support Thunderbolt displays and other devices. Does this need to be done through the Graphics card expansion or a additional card to be inserted?

    No. There is no way to upgrade any Mac Pro older then the cylindrical 2013 Mac Pro to ThunderBolt.
    The requirements of Thunderbolt require a totally redesigned motherboard and chip set rather any plugin cards. These motherboard were never developed for older Mac Pros.

  • I have an old Mac with OS x 10.5.8 how do I upgrade to support Facetime

    I have an old Mac with OS X 10.5.8, can I upgrade to support FaceTime? Thanks

    KDam,
    Please allow me to make a suggestion -- I looked on the Skype site regarding system requirements for Osx.
    Accordingly, they list 10.5 as an acceptible operating system for their application.  In your case I would seriously consider Skype over FaceTime.  I don't think it's worth all the effort to go through the headaches such an upgrade can cause, just to be able to use FT.

  • Where I can find Camera RAW upgrade that supports Nikon D600 ?

    Where I can find Camera RAW upgrade that supports Nikon D600 ?

    mmeles wrote:
    I omitted to mention I have CS5 version of Photoshop. Using a new camera Nikon D600 produces "Nikon Electronic File" (.NEF) this is my RAW file I need to process.
    Uh huh...and you'll need to convert those NEF files to DNG files using the free DNG Converter in order to use them with Photoshop CS5. Either that or upgrade to Photoshop CS6. BTW, it's prolly not a great idea to post your personal information on a forum...you might want to edit that out.

  • VMware Compliance Checker 5.0 Support ESXi 5.1

    Hi,
    VMware Compliance Checker support ESXi 5.1 ?
    Regards,
    Gopi

    Hi Pravin
    Do you know when it will be released?
    Regards
    André

  • Is Airport "Snow" base upgradable to support WPA?

    Hi. I was just curious can the Airport "Snow" base station be upgradable to support WPA or am I stuck with WEP? Thanks.

    WC, Welcome to the discussion area!
    Sorry, but the snow AirPort base station (ABS) only does WEP.

  • Upgrade from support stack 12 to support stack 17

    Currently I am on a client that has support stack 12 and needs to upgrade to support stack 17.  My only question is what are dependencies that will be needed to be able to upgrade to 12 to 17, because I know this will not be a easy move.  Any knowledge would help on this issue.  Thanks!

    just visit http://service.sap.com/rkt-Solman
    select your solman version like 7.0, opt for section 'Technology consultants and System Administrators' and then technology configuration learning map
    there you will find two sim files for the usage of Mopz in solman, simple usage and normal usage
    and refer this SDN guide
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60d6ce0d-734f-2a10-e596-adbce4df51a8
    http://help.sap.com/saphelp_smehp1/helpdata/en/45/56dd10b5f62a50e10000000a11466f/frameset.htm

  • Upgrading the support package

    Dear All,
    We are going to upgrade the support package in R/3 side.  Our delta records are running everyday.
    Kindly let me know what are the precautions to be taken.
    Points will be rewarded
    Thanks in advance
    Sathiya

    Hi,
    All V3 jobs to be suspended and all the delta records to be fethed into BW side before the SP implementation.
    For this the easier and better approach, if you have so many delta packages for different applications to handle, bette create a Info package group and run it just before the SP implementation twice to bring all the records,
    Hope this helps
    Regards
    Srini

  • Where i can get a Cisco VMware Vsphere ESXi 4.1 update 1 installable media

    Hi All,
    can someone from cisco tell me how to get cisco vmware vsphere ESXi 4.1 update 1 that was certified by Cisco ?
    because the last release from the vmware website still 4.1 without update 1.
    http://downloads.vmware.com/d/details/esxi41_cisco_oem_iso/ZHcqYnRkdHdiZCpwcA==
    Thanks.
    Berwin H.

    Sorry for any spelling errors:
    What is working well for us, is to always get the latest ESX(i) release from vmware, apply all patches and then make sure to install the newest drivers for Cisco fnic (hba) and enic (lan) that can be found on the vmware site.
    During our first UCS upgrade (we did not have installed the Cisco drivers) we experienced some issues. A lot of our VMs lost connectivity to storage for about 2-3 minutes during the reboot of the primary FI. After opening a support request at vmware and Cisco, vmware sent us a newer fnic driver, as the standard driver included in the ESX iso did not handle hba failover very well.
    Since that upgrade we always keep up to date the enic and fnic drivers for Cisco UCS. They can be found on the VMWare ESX download site.
    Newer drivers are also available on the Cisco UCS driver CD, but those are not yet signed by vmware, so it may be a better idea to use those tested by vmware.
    Since we are handling ESX updates like this, every UCS upgrade and everything else worked like a charm and my pulse during upgrades got divided by 2
    BTW: Also with other server manufacturers we could have saved us a lot of trouble if we simply had upgraded adapter drivers earlier.

  • Windows 2008 R2 will not install on ESXi 4.0 Update 2

    Hello,
    I am attempting to install Windows 2008 R2 from an iso downloaded directly from Microsoft on ESXi 4.0 update 2.  The server is a C210-M2.  The iso is booting to the initial install screen properly, but when electing to install I am immediately prompted with "A required CD/DVD drive device driver is missing."  (See attached image)
    Wondering if anyone has come across this issue yet and what steps need to be taken to install the OS properly.
    Thanks!

    Guys,
    What you want to do is ensure you have the driver loaded in virtual media when installing the OS.  See step 12 in the link below from the Cisco support page.
    http://www.cisco.com/en/US/partner/docs/unified_computing/ucs/sw/b/os/windows/install/2008-vmedia-install.html
    Hope this helps.

  • FileVault2 & no supported helper partition to update

    While a workaround for a problem I had fixed the issue, the root cause remains.
    I am using FileVault2 full disk encryption. It seems on my system the kernelcache never gets updated after the drive has been encrypted with FileVault. To be exact: The kernelcache on the helper partition 'Recovery HD' never gets updated. The kernelcache in
    /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache
    gets updated correctly. What's missing is the part to transfer an updated kernelcache to the helper partition. The last lines of output from
    kextcache -v 6 -update-volume /
    are
    Created prelinked kernel //System/Library/Caches/com.apple.kext.caches/Startup/kernelcache.
    CSFDE property cache does not need update.
    /: no supported helper partitions to update.
    So the kernel cache in the encrypted '/' partition is updated, but since there are 'no supported helper partitions to update', the new kernelcache is not copied to the location which is used during boot. At boot, the kernelcache from the helper partition is loaded. Its location is
    /Volumes/Recovery\ HD/com.apple.boot.S/System/Library/Caches/com.apple.kext.caches/Startup/kernelc ache
    For some reason the helper partition does not seem to be associated with my encrypted root partition. Does anyone know how to associate my helper partition with the encrypted root partition again?
    Here is some background about my system and how I installed it:
    My Mac has one internal disk. I use it for Time Machine backups only. It is not possible to boot from the internal disk. My system disk is an external SSD connected via USB 3.0.
    I installed the system disk by holding CMD-r during boot to get the Mac into Recovery Mode. With Disk Utility I erased the SSD completely, left Disk Utility and installed OS X Mountain Lion 10.8.3. When the installation was finished, I created a temporary admin user and used Migration Assistent to migrate all User accounts and programs from a backup. Then I logged into my user account which Migration Assistent had created, deleted the temporary admin user and activated File Vault. Later, I installed an upgrade for a program that uses a kernel extension. After every boot I got the message, the version of the kernel extension did not match the version of the program. While everything in the encrypted '/' partition had been updated correctly, the kernelcache on the Recovery HD had not. While I can copy the kernelcache to the helper partition manually, I think this a hack and it should happen automatically when the kernelcache is updated in the '/' partition. I am not aware having done somthing that could make Mac OS X loose the association between the '/' partition and the Recovery partition.

    Yuo can't "undo" the update. Bose support may be your best bet.

  • Cisco Customized ESXi 5.5 Update 2 Image

    When can we expect to see the new ESXi 5.5 Update 2 custom image? I just checked VMWare's site and I see Update 1 but not Update 2.  Is there a supported/recommended method for updating UCS servers to ESXi 5.5 Update 2 in the mean time?
    Thanks

    1) use this utility to figure out which enic / fnic is required. eg.for ESXi 5.5 U2
    Adapter Driver   = 1.6.0.12 (FNIC) / 2.1.2.59 (ENIC)
    Adapter Firmware = 2.2(3)
    http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html
    2) Install ESXi 5.5 U2, regular iso (Non OEM version) from VMware website
    3) get the above fnic / enic driver from ISO image of UCS-related drivers 
    ucs-bxxx-drivers.2.1.3d.iso
    4) update the fnic/enic driver either manually with CLI or VUM.

  • Yosemite UPGRADE, Apps that I try to update fail with the message that connection to App Store failed, then i get a message that the updates were purchased by another user ID or purchase cancelled. All five updates have this error

    AFTER I UPGRADED TO YOSEMITE, I TRIED TO UPDATE THE FIVE APPS THAT I WAS BEING NOTIFIED NEEDED UPGRADING (IMOVIE, IPHOTO ETC). I TRIED TO UPDATE VIA THE APP STORE BUT GOT A MESSAGE "UPGRADE NOT POSSIBLE WITH THIS APPLE ID BECAUSE IT WAS EITHER BOUGHT BY A DIFFERENT USER OR THE ITEM WAS REFUNDED OR CANCELLED." I DO NOT HAVE A PROBLEM SIGNING ON TO ICLOUD OR ANY OF THE OTHER SERVICES USING MY APPLE ID, I ALSO CHANGED THE PASSWORD AT THE PROMPTING. SO I'M NOT SURE WHAT IT MEANS. WHAT CAN I DO TO UPDATE MY APPLICATIONS?

    Please test after each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes. Keep in mind that no one here represents Apple or can help with customer-service issues.
    Step 1
    A purchased app can only be updated by signing in to the App Store with the same Apple ID that was originally used to buy it. There's no way around that limitation, which also applies to free apps. If you can't sign in with the buyer's ID, delete the app and reinstall it. You'll have to pay for it again, if applicable.
    Step 2
    If you get the alert when trying to update a bundled iLife app, select the Purchases page in the App Store and locate the app in your purchase history. If there's a button marked ACCEPT on the right, click it.
    If you have a used Mac, the bundled apps were linked to the original owner's Apple ID and can't be transferred to you. Reportedly, customer service has issued redemption codes to some second owners who asked, but it's not guaranteed.
    Step 3
    If you're trying to update iLife or iWork apps that were installed from a purchased DVD, or if you have a refurbished Mac bought directly from Apple, contact App Store customer service for a redemption code. You may be asked for the part number of the DVD.
    Step 4
    From the App Store menu bar, select
              Store ▹ View My Account
    Enter your Apple ID password at the prompt. At the lower right corner of the window that opens, click the Reset button. Close the window.
    Step 5
    According to a report, the error can result from changing the language setting of your Apple ID account. I can't confirm.

  • Upgraded to os7 and done my updates on the apps as they appear.. Any function to do with the iBook store is not working or visible.  The purchase at the end of a sample book doesn't work either.

    Upgraded to os7 and done my updates on the apps as they appear.. Any function to do with the iBook store is not working or visible.  The purchase at the end of a sample book doesn't work either. Anyone have a solution?

    Upgraded to os7 and done my updates on the apps as they appear.. Any function to do with the iBook store is not working or visible.  The purchase at the end of a sample book doesn't work either. Anyone have a solution?

Maybe you are looking for