2.1 EA2 - Better support for Schema jumpers (nice to have)

Hi!
If login as a user with DBA privileges, jumping to a another schema and let say rebuilding an index - this will give an error, due to the fact that SQL Dev does put the current schema in the SQL - example:
Login in as a user: UserWithDBA
Go to Other Users
Pick a schema - let's call it TEST
Try to rebuild index - SQL Dev generates this SQL:
alter index "Table_Idx" rebuild online
This won't work!
Should generate:
alter index "TEST"."Table_Idx" rebuild online
This can be found in various functions within SQL Developer
-Kurt
Edited by: sfeokub on 2009-11-22 01:53

no idea about any of these things all i want to know is if it fixed the txt sound not working and what on earth is the 2 txt sounds mean?? im assuming if u dont look at ur txt it will sound again???, ive checked 3g its still sh1t here even tho im in a huge 3g area apparently but i didnt have many probs with last update so who knows

Similar Messages

Call upon even better support for Unicode

Hello
Following some messages I have posted regarding problems I encountered while developing a non-English web application, I would like to call upon an even better support for Unicode. Before I describe my call, I want to say that I consider Berkeley DBXML a superb product. Superb. It lets us develop very clean and maintainable applications. Maintainability is, in my view, the keyword in good software development practices.
In this message I would like to remind you that the US-ASCII 8-bit set of characters only represents 0.4% of all characters in the world. It is also true to say that most of our software comes from efforts of American developers, for which I am of course very grateful.
But problems with non US-ASCII characters are very very time consuming to solve. To start with, our operating systems need to be configured especially for unicode, our servers too, our development tools too, our source code too and, finally, our data too. That's a lot of configuring, isn't it? Believe me, as a Flemish french-speaking, danish-speaking developer who develops currently a new application in Portuguese, I know what I am talking about.
Have you ever tried to write a Java class called Ação.java, that loads an xml instance called Ação.xml that contains something like <?xml version="1.0" charset="utf-8"?></ação variável="descrição"/>? It takes at least the double of time to have all this work right in a web application on a Linux server than it would take to write a Acao.java that loads Acao.xml containing <?xml version="1.0" charset="us-ascii"?></acao variavel="descricao"/> (which is clearly something we do not want in Portugal).
I have experienced a problem while using the dbxml shell to load documents that have utf-8 encoded names. See difficulties retrieving documents with non ascii characters in name The work around is not to use the dbxml shell, with which I am of course not very happy.
So, while trying not to be arrogant and while trying to express my very very great appreciation for this great product, I call upon even better support for Unicode. After all, when the rest of us, that use another 65279 characters in our software, will be able to use this great product without problems, will it not contribute to the success of Berkeley DBXML?
Thank you
Koen
Edited by: koenheene on 29/Out/2009 3:09

Hello John and thank you for replying,
You are completely correct that it is a shell problem. I investigated and found solutions for running dbxml in a Linux shell. On Windows, as one could expect, no solution so far.
Here is an overview of my investigation, which I hope will be useful for other developers which also presist writing code and xml in their language.
difficulties retrieving documents with non ascii characters in name
I was wondering though if it would not be possible to write the dbxml shell in such a way that it becomes independent from the encoding of the shell. Surely their must be, not? Rewrite dbxml in Java? Any candidates :-) ?
Thanks again for the very good work,
Koen

Beta: Support for more languages

We've added support for many more languages. See the full list below. You can access the beta by clicking this special link. This link will allow you to use the site, same as before, but will also enable the new language support.
You can find additional supported languages in the footer menu. Once you select your desired language, you can begin creating themes. Try it out and let us know how it works for you. We look forward to reading your feedback and seeing new localized themes in Kuler!
List of supported languages:
Brazilian Portuguese
Danish
Dutch
English (default)
Finnish
German
Italian
Japanese
Korean
Norwegian
Russian
Spanish
Swedish
Traditional Chinese
Turkish
Polish
Czech

http://na.blackberry.com/eng/support/downloads/download_sites.jsp
go to this page and find a carrier for the country you want (here : Sweden).
Download the Handheld Device Software OS and install it on your blackberry.
for the installation howto, please refer to this discussion :
http://supportforums.blackberry.com/rim/board/message?board.id=8300&thread.id=6807&jump=true
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

EA2 - request support for database roles

Would like to see database roles supported in the Connection Navigator for a schema, just like tables, views, etc. Need to be able to create/drop/copy/view roles, see what users or roles have been granted to a particular role, view or update what roles/object privs/system privs this role has been granted.

Feature requests should be made according to the instructions in the "Feature Requests" sticky on the forum (http://forums.oracle.com/forums/ann.jspa?annID=444). If you go there and search on Roles, you will find an Accepted feature request for Roles Node. How soon this will be built into SQL Developer is another matter - we will have to wait and see.
theFurryOne

[Feature Request] Better support for new buttons in JUNavigationBar

In my project I use a home made sub-class of JUNavigationBar, which contains some new functionality apart from a new button as well. This button allows me to refresh the currently selected row.
However, since I added this button though a simple this.add(), some of the functionality in JUNavigationBar may get confused.
For example, when I have removed some of the standard buttons but left my own button in place (setHasXXX()), the component index (calculated in JToolBar) and the array index for the buttons in JUNavigationBar may not match. This occasionally causes an ArrayIndexOutOfBoundsException.
In short, what I'm asking for, is a better way to manage buttons on JUNavigationBar. Even making the array of buttons and related methods and such protected in stead of private (so that my sub-class could handle it) would be a good start.

Hi Arno,
I had a similar issue with trying to create a Nav bar with dynamic content. My solution was to leave all the standard buttons in place and to use setVisible(x) to make them appear or not as required.
BTW have you noticed that rollover behaviour isn't consistant ie works for FIRST/LAST etc but not for FIND/QUERY.
Regards
Andy

Customer request: better support for Flash-heavy web sites!? Feasible?

The company I work for (a SUN partner) is currently engaged in a desktop virtualisation project at a customer who is in the health care sector. Of course Sun VDI isn't the only thing they have been looking at. But so far we've always come out on top.
PanoLogic and their "Pano Cube" thin-clients were looked at but never really considered. The argument being "Nobody is using that!" and they don't want to play "Star Trek" and "boldly buy things nobody has bought before". So it was "Thank you and bye bye PanoLogic". However ... PanoLogic is on their radar now and they might still go back one day ...
Next up was VMware View. They didn't like what they saw. So for now they will keep their ESX and vSphere servers but VMware View is out of the game for now.
So right now there is still us with our Sun VDI / Sun SSGD offer and a competitor with their Citrix offerings. So far we've always managed to tip the balance in our favor.
This Wednesday though we had a few of customer's managers visit us. They wanted to see a Sun VDI 3.1 live demo. All was fine, all was well, and we had the impression that they were so close to giving the "go ahead", when one of the pro-Citrix guys opened two web sites in his VDI demo session:
http://www.adiacom.ch
http://www.2advanced.com
Both sites are extremely extremely Flash-heavy.
And of course: The performance was sub-optimal. We were running this on a Sun Ray 2, 1600 x 1200 pixels. Even though the sound was tip top in both the Windows XP and in the Linux sessions (they admit that in all the other products they have tried so far the sound was choppy or there was even no sound at all .... ) the video was slightly out of sync. And the web site "2advanced.com" took too long to load.
So now all of a sudden the ability to play these two web sites "tip top" on a Sun Ray 2 is THE killer argument for them. It doesn't even matter that all other solutions they have looked at can't show those two web sites at all, now it's all of a sudden that Sun Rays and Sun VDI just "aren't good enough" at playing those two web sites.
Customer is king. Customer is always right.
So ... anyone here from Sun have any suggestions how we might improve performance of those two web sites inside the VDI sessions? Is there anything we could tweak and tune inside VDI 3.1 to get the max performance out of our setup?
Or are there any products in the pipeline like new Sun Ray clients with improved multimedia performance that I could tell them about so we could keep them interested in Sun's products ... ?
Edited by: DJ. on Oct 30, 2009 6:22 AM -- typos corrected.

Greetings oh Master :)
We don't have flash acceleration for LinuxI know. And yet the "adiacom.ch" web site performed better on Firefox & Ubuntu than on Win XP-SP3 & MSIE 8.
only XP and W2K3.I know
Are you using the MS-RDP severSun VDI 3.1 ... I get the VDI login mask, I login, I pick a Windows XP desktop from the available pools, and Windows XP appears. The desktops are provided via VMware vSphere.
viewing the site via IEUnder Windows XP, yes.
and have the Flash acceleration bits installed?I remember installing various multimedia bits that can be found in the "Supplemental" sub-directory of the SRWC 2.2 ZIP file: "SunMMR" and "SunWinUSB". But now that I look at the web page you linked to I am a bit confused .... Did I install an old version? I will have to check that again and make sure this stuff is really really installed.
Thanks for that link!

Better support for iPhone Retina display apps

The iPad display is higher resolution than the iPhone 4. It would be nice if when I use an iPhone app on my iPad that is built for a retina display if it was not downscaled to a non-retina resolution. This would make the apps built for the retina display way more usable on the iPad.
Seems like an easy change. I'm actually surprised it was not included as part of iOS 4.2.1.

Again, that's not how it works. Apple didn't really have to do anything for the iPhone 4 because they're the same screen size. All they did was double every pixel for the iPhone 4 which is what you see when you use 2x mode on the iPad. If the iPhone had a 10" screen, even with the retina display it would look just as blocky as the iPad because of the screen size.
Did you not notice the resolution for iPhone 4 is exactly 2x that of the old iPhones? 640x960 vs 320x480. They didn't do anything special with the iPhone 4 to make the old apps look good, the screen size being the same is what made the difference.
this is all in reference to the iPhone 4 displaying apps not optimised for the retina display.

What's a better browser for OS X? I have Safari and Chrome? . and I also got a iphone 4 running iOS 6.

I got a MBP 2011 15'' i7 quad core , 2.0 ghz , with 8GB ram, I'm deciding on whats a good browser to use.

Safari works properly in most of the cases and it's good for a basic browsing. However, it has got a lot of bugs that make other browsers better. In this case, both Firefox and Chrome works well with Macs. You should try all of them and decide what's the best one

EA6900 Update and Two Suggestions for Future Firmware "Nice to Haves"

Hey, first off, I've been a user of Linksys Routers for many years now, so I am familiar with the different settings and other selections that you generally see on the firmware pages. As to the EA6900, I am very, very PLEASED with how this router initially set up, along with the different pages in it's firmware. With the one exception noted below, the pages and the various settings "flow" very well. This baby is up and kickin and the house is literally dripping in both 2.4 and 5 GHz RF. The DHCP Reservation and MAC Wireless Filtering Tables worked without a hitch. The setup for FTP and NAS was simple! BTW, the setup for FTP shares is far easier than what we had to do using the EA3000 firmware. Kudos there! I am using the router associated with a server that is hosting about 25 different wired devices throughout the house, with a Cisco SG-200-08 Smart Switch behind the router for the LAN, which is load balancing on a Teamed (2 NIC'S) 2GB Adapter . The router grabbed Comcast's Native IPv6 and set that up flawlessly. Here is the information on how all that went (read from the bottom up): http://www.dslreports.com/forum/r28693387-IPv6-Dumb-Questions-About-My-IPv6-Goat-Roped-Hookup Information on how the netwrk worked in Teaming and LAG mode is here: https://supportforums.cisco.com/message/4071888#4071888
OK:, So, Mr. Linksys Firmware Developer, whoever and wherever you are, I have two suggestions on the user GUI that would make everyone's life a little easier next time the firmware is updated:
1. Please make it so numbers, particularly MAC and IPv6 numbers, can be copied and then pasted to another place in the firmware. For example, in the Information tab of the Device Settings section, I should be able to copy MAC and IP numbers and then be able to paste them, say, in the DHCP Reservation Table. Other Linksys device firmware allowed for this.
2. For goodness sakes, PLEASE don't nest the Diagnostics tab under the Troubleshooting group. It drives me nuts to think that getting the router's status, to ping or traceroute, or to do a firmware backup would be found in "Troubleshooting". Suggest that all y'all just remove the Diagnostics tab to the far left side of the application and have that item as its own stand-alone group!
Then I will be most happy. As if it really matters, BUT I wanted to give all y'all my perspective from a user way down in the day-to-day weeds. A most happy Boy otherwise.
Crazy Jumpin jack
Marietta, GA
Crazy Jumpin Jack (Gregory)

Hi Crazy Jack,
We'll get the Team into your suggestions and commendations. Appreciate the feedback. We hope to see you help out in the Community as well.
Regards,
24JUAN80
Linksys Support Community Moderator
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

Beta driver for X-Fi (SBXF_W7DRVBETA_US_2_18_0008) users feedback thread

<div class="DownloadDate">Release date : 28 Jan 09<div class="DownloadShortDesc">This?download is a beta?driver providing Microsoft? Windows?7?Beta support for Creative Sound Blaster? X-Fi?series of audio devices. For more details, read the rest of this web release note.<div class="DownloadDetailDesc"><div class="DownloadFileName">File Name : SBXF_W7DRVBETA_US_2_8_0008.exe<div class="DownloadText">This?download is a beta?driver providing Microsoft? Windows?7?Beta support for Creative Sound Blaster? X-Fi?series of audio devices. For more details, read the rest of this web release note.
Take note of the following:
THIS IS AN UNSUPPORTED BETA DRIVER. There is no technical support for this driver.<
We recommend that only experienced users install this driver. Do not install this driver on a system used to perform critical tasks.<
Users who are looking for stable drivers should wait for the final release. When this happens, user should install the latest Sound Blaster X-Fi?series?driver available.<
This download supports the following audio devices only:
Sound Blaster X-Fi XtremeMusic<
Sound Blaster X-Fi XtremeGamer?Fatalty? Professional Series<
Sound Blaster X-Fi XtremeGamer<
Sound Blaster X-Fi Platinum?Fatalty Champion Series?<
Sound Blaster X-Fi Platinum<
Sound Blaster X-Fi Fatalty<
Sound Blaster X-Fi Elite Pro<
Sound Blaster X-Fi<
Requirements:
Microsoft Windows?7 Beta<
Creative Sound Blaster X-Fi?series audio devices listed above<
Notes:
To install this?driver
Download the?.exe file onto your local hard disk.<
Double-click?the?downloaded file.<
Follow the instructions on the screen.<
<?
http://support.creative.com/download...verType=#type_
Does anyone have any experiences installing this over Sound Blaster X-Fi series Support Pack .0

0Re: New driver? SBXF_W7DRVBETA_US_2_8_0008.exep
gazzamcg wrote:
robertmc8 wrote:
Does CMSS work with this new driver? I don't have win 7 on my computer anymore hehe. Does support 8channel Ditigal out? Just wondering last time it was only 2channel support when I look at it. I can't go back windows 7 I'm going send my Visiontek 2600 Pro AGP 52 card in for replacement since x700pro doesn't support win7Message Edited by robertmc8 on 0-28-2009 03:5 PM
Yes, CMSS work's with this beta. I don't know if the 7. digital out works ....
The sound is excellent !
kpo6969, why would you wan't to install over existing drivers ?
Better to uninstall existing drivers first, then install the beta's as this?should avoid any conflicts.
- - - - - - - - - Yellow matter custard, dripping from a dead dog's eye. Crabalocker fishwife, pornographic priestess,Boy, you been a naughty girl you let your knickers down. I am the eggman, they are the eggmen. I am the walrus, goo goo g'joob ?- - - - - - - - - - - - -
Message Edited by gazzamcg on 0-28-2009 0:26 PM
Ok sorry my mistake misspell digital word blame on my speach issue when I was growing up as a kid lol.
Anyway Can u check digital In l in for me thanks Last time I check it only support 2channal I don't want formated back to windows 7 I can't anyway to I get my HD 2600pro card back going send in get fix so that mean I be on my x700pro card for next couple weeks.
I won't do driver mod yet to I know whats it's doing later on hehe.

Limited Support for Time characteristics 0FISCPER/0CALMONTH/0CALQUARTER

The time characteristics 0FISCPER/0CALMONTH/0CALQUARTER are converted into Character type value in Universe which results in following problems on switching to Webi based reporting from current SAP BI front end tools.
Problem 1: Sorting does not work correctly using the Key Value or Description as both are being treated as Character values. While setting up the Custom sort sounds like a workaround, the sort list has to be generated for all possible months/quarter/year combination that will be seen in the reports. Not a good solution when business analysts has to build their own reports from Universe.
Problem 2: Using range selections (E.g. between, greater than, less than etc) in Universe conditions/prompts does not yield correct results due to the same fact that all values are treated as characters. Possible workaround is use this kind of conditions in BI query variables directly. But, this does reduce the flexibility of selections a lot, especially when users are used to simple ways of making range selections in BEx.
Problem 3: keying in the prompt values for these characteristics/dimensions (both Key and text) is very cumbersome due to format issues. E.g. 1/2010 is no more recognized as valid fiscal period. You have to enter key value as K4/001/2010 or Text value JAN 2010 or January 2010 (based on text selected in query/infoobject). Only way of simplifying user input is to use LOVs and let users always select from LOVs. But, the users lose ability to simply key in values.
Problem 4: The default LOVs generated for Fiscal period takes values from the master data and hence might show all available fiscal periods including special periods 00,13 thru 16 etc. even though they may not be relevant to the underlying report (e.g. a Sales report). This can confuse users who are not used to seeing these periods before. Possible workaround is to apply filters on LOV using condition and in some cases this should fix the problem.
While some of the workaround for above problems sound acceptable (3 & 4), the others are not in my opinion(unless there is a better workaround anyone else have). My question is to experts from SAP is, can we expect better support for these objects in future Service packs? If not, then perhaps we need to move away from using this objects in reporting and use 0FISCPER3, 0CALMONTH2, 0CALQUART1 in combination with 0FISCYEAR/0CALYEAR to overcome above issues.
Though this can mean (1) good amount of backend changes to include these Infoobjects in underlying Infoproviders, if there are not present already (2) User training to explain them to use these new time char fields instead of the ones they are already used to.
I'm fairly new to BO and might have overseen somethings. I have already searched the BO forum related to this topic and did not find any satisfactory answers. Any input on this is greatly appreciated.
Thanks & Regards,
Sree

The issue is that these InfoObjects are not Data Type DATS in BI, they are NUMC and PERI7. Only InfoObjects of type DATS will be converted to Date format in the BO universe.
Workarounds:
- instead of using these time characteristics to filter results, consider using transaction dates, such as posting date.
- create a customer InfoObject ZFISCPER which is a transformation of 0FISCPER to DATS data type.
- create a custom variable in the WEBI reports which looks at the key for 0CALMONTH and only considers the first 2 characters which should identify the month (e.g. 01 = January, etc.). You can then sort on this and it avoids the year concatenation issue (e.g. JAN 2008, JAN 2009, JAN 2010).

BIOS support for DTR Cpu's

Just wondering if anyone knew if MSI was working on better support for DTR and mobile Cpu's with it's next bios revision?
It's neat that I can get my CPU to run 1.5v and 10x multi through clockgen, but It'd be really nice if I could just set it and forget it in bios...

I realy hope so, as i can only run it at proper mutlipliers with 1 memory stick in slot 1, not sure if this is because of the corsair memory, or the boards support for dtr's (i think it is the later).

Windows 7 beta driver for the Creative N400

Hi everyone,
There is a Windows 7 beta driver for the Creative N400 speakers system.
Creative Speakers Beta Driver 1.02.000
Filesize : 24.68 MB
Release date : 13 Apr 09
File Name : USPK_W7DRVBETA_US_1_02_000.exe
This download is a beta driver providing Microsoft Windows 7 Beta support for certain Creative speakers. For more details, read the rest of this web release note.
Take note of the following:
* THIS IS AN UNSUPPORTED BETA DRIVER. There is no technical support for this driver.
* We recommend that only experienced users install this driver. Do not install this driver on a system used to perform critical tasks.
* Users who are looking for stable drivers should wait for the final release. When this happens, user should install the latest Creative driver available.
This download supports the following devices only:
* Creative N400
Requirements:
* Microsoft Windows 7 Beta
Notes:
* To install this driver
1. Download the .exe file onto your local hard disk.
2. Double-click the downloaded file.
3. Follow the instructions on the screen.

Sorry but this information is not available at this time. If there is any updates, you will see it in the announcement page.

IOS support for Flash Builder 4.5.1

I am getting the following message when I try to export a releae build to iOS using Flash Builder 4.5.1:
This platform is not currently supported for Flex Mobile projects
I have tried running the update again and gives me the update was successful message, but I still don't have iOS support.
I did update using the Eclipse updater and was unable to open Flash Builder, but since resolved that issue. I wonder if I need to reinstall Flash Builder and reapply the update or if there is an easier fix.

I just created a project with Adobe Launchpad (http://labs.adobe.com/technologies/airlaunchpad/), and it looked like I setup all the options for iOS, but when I go to run configurations and try and deploy to an iOS device I'm getting the same problem: "This platform is not currently supported for Flex Mobile projects"
Anyone know why?

EXP-00105: parameter CONSISTENT is not supported for this user

Hi,
I have use Oracle 10g on unix platform
i have export is taken from following command
exp \'/ as sysdba\' file=t.dmp full=y buffer=10485760 log=0101.log CONSISTENT=y statistics=none
export is sucessfull but one warning
EXP-00105: parameter CONSISTENT is not supported for this user
if i have use without CONSISTENT parameter then export is successfull ,
why EXP-00105 error occured ?

As per Oracle Error Notes:
EXP-00105: parameter string is not supported for this user
Cause: The user attempted to specify either CONSISTENT or OBJECT_CONSISTENT when connected as sysdba.
Action: If a consistent export is needed, then connect as another user.
Looks likE the SYS user cannot do a transaction level consistent read (read-only transaction). You could have performed this by SYSTEM user or any DBA priviliged user to to take the complete export of your DB.
Anyway, for more information the error "EXP-00105", please take a look into the same question on another Oracle related forums.
http://www.freelists.org/archives/oracle-l/05-2006/msg00236.html
Regards,
Sabdar Syed.

2.1 EA2 - Better support for Schema jumpers (nice to have)

Similar Messages

Maybe you are looking for