2.1 Out and Best way to Update if you are a mobile me subscriber's

From My experience put your phone in to DFU mode and reset your phone back to new.
Remember this works for me and I recommend it if you use MOBILE ME.
Download the new Firmware and then follow the below
http://www.ifonenation.com/2008/07/24/how-to-put-your-iphone-into-dfu-mode/
once Itunes has installed the new firmware.
Then re-sync your data again, as if you just bought it.
If you use mobile me this is the best option for you as all your data is stored on apple servers and will update your phone from your mobile me account.
** you will loose the following... SMS and all call logs and your favorites some and all preference settings..
To eliminate any confilicts from apps etc this is the best way to go and give your iphone a fresh start.
I have always done this with the last updates and never had a problem with any conflicts, and performance issues.
Remember this is for mobile Me users as all you Contacts,Callender, and Mail is stored remotly.
Keep us posted on your 2.1 findings.
I have full 3g NOW! yay

The fastest way is to directly change the values in the catalog.pse9db database. The database is a SQL Lite database, so if you know (or know someone who knows) how to run SQL queries against a database, you're in luck because Adobe did an excellent job of designing a highly normalized database schema.
I highly recommend first trying this on a copy of your database. In general, the procedure goes like this:
Add one of your images on the P: drive into the catalog. This will establish a listing for the P: drive and its identification in the volume_table table.
Run a SQL query against the volume_table table to see a listing of all the rows.
Note the values of the "id" column for your "thehive" volume and the "P:" volume.
Run a SQL query against the media_table table to update the value of the volume_id column, replacing all instances of the "thehive" id number with the id number of your "P:" drive. The SQL query will look something like this:
Update media_table
set volume_id = "<your new value>"
where volume_id = "<your old value>"
I've tested this with PSE9.0.3 on Win7, changing the location from a CD on my E: drive to a USB stick on my F: drive.
Good Luck!
Ken

Similar Messages

I am moving from Southern California to Maui, Hawaii and I need to figure out the best way to get my 24 inch iMac across the ocean. Does anyone know the best way to do this?

I am moving from Southern California to Maui, Hawaii and I need to figure out the best way to get my 24 inch iMac across the ocean. Does anyone know the best way to do this? I have found GearGrip's LCD harness so that I can do carry-on onto the plane... Or maybe use a Pelican Case to do it as a "checked bag"? Or any other suggestions??! Please help!
Thanks so much!!

I don't recommend you send the iMac in a checked bag. Might get damaged.
Check the airlines website for carry on guidelines.
Or, if you have the original box that the iMac came in, if you have someone who can pick up the iMac for you, send it ahead Fed Ex and insure the package.
Just make sure the display is covered to protect it. A blanket perhaps.
Aloha ...

Best way to update a solaris jumpstart OS image.

Hi all,.
Ive been recently building some v240's but have run into trouble with the rather out of date 02/02 instance of Solaris 8 (yes, i did say solaris 8 - it's a political thing..)
Anyhow, I have cd images of Solaris 8 02/04 and have a copy of the Sun Blueprints Jumpstart book by "Howard and Noordergraph".
On page 92, it says to use the "setup_install_server" script with the -b option for /jumpstart/OS/Solaris-xx-xx-xx.
Ive done that without any probs, then it goes on to say if you want an install server do the same command again without the -b switch.
Problem is that it spews out this message.
733 root@bbs00080 # ./setup_install_server -b /jumpstart/OS/Solaris_8_02-2004/
Verifying target directory...
setup_install_server:
The target directory /jumpstart/OS/Solaris_8_02-2004/ is not empty. Please choose an empty
directory or remove all files from the specified directory and run
this program again.
So i chose an empty directory and it goes and does it.
Is this an errata?
I already have /jumpstart/OS/Solaris_8_02-2002/ and I wanted to update the files so that I can boot the v240r.
Except 02/02 doesnt let me do that as it doesnt support the v240r arch.
Sun told me this, but I'm lost because my existing profile for this box, lists all the packages I want to install, but it whinges about not being able to find a .cdrom toc file.
I already have three flash archives which i created from good builds from 02/02, in my rules file which work, but this pesky update for the 240r is getting to be a little tricky.
So far, ive tried copying all the packages from 02/02/Products directory into 02/04/Products but some of them don't install despite being there.
Can anyone suggest the best way to update my 02/02 with the 02/04 boot loader for the v240?
Thanks in advance and sorry for any confusion.
D.

I'm sorry. I meant. Say my array of x positions is 3, 4, 9. I change 9 to 30. How can I make the polygon see that change?

Best Way to Update: Over-the-air OR Via PC (Thru N...

Which way do you think is the best and MOST RELIABLE way to update the Nokia Nseries? Which way do you use?
1- Over-the-air
2- Via Nokia Software Updater (PC)
Your Thoughts?
Thanx.
Solved!
Go to Solution.

28-Dec-2008 08:47 PM
grschinon wrote:
28-Dec-2008 03:44 PM
nirav_m_suthar wrote:
Best way to update the firmware is the via PC coz there are many reason like it takes less time than any other methods, very secury etc.
That is absolutely not true.
An NSU update for the N96 at least is a 125MB download or thereabouts.
V10.043 to V11.018 was about 3.5MB via FOTA, V11.018 to V11.101 was no more than a few hundred KB, and V11.101 to V12.043 was once again about 3MB.
FOTA is far more reliable than NSU since there are fewer machines involved (the phone grabs the update directly from Nokia instead of having it buffered by a machine, a machine running one of the most notoriously unreliable operating systems ever created) and therefore fewer points of potential failure.
As psychomania pointed out, there are cases of people bricking their phones with NSU daily on these forums. To date, we have see one case of a failed FOTA update. Draw your own conclusions.
Like our resident psycho, I hope that FOTA becomes far more widespread in the future. It is much more reliable and quick.
Message Edited by grschinon on 28-Dec-2008 04:50 PM
although i tend to agree that FOTA should be safer, but i think we might be jumping to conclusions to early, as there are about 91 phones supported by NSU, most of which are updated by the conventional PC way, whereas there are very few that uses FOTA (i knew of 2 handsets), hence the relatively lower incidence of failures...

What's the best way to update my Mac with the latest version of Adobe Flash Player?

I've been getting prompts whenever I look at certain websites to download the latest version of Adobe Flash Player. I'm skeptical as to responding to those prompts. What is the best way to update my Mac Pro with the latest version of Adobe Flash Player?

You might also want to consider uninstalling Adobe Flash... I currently don't have it installed and haven't needed to install it. Most websites are now coded in HTML 5 so that the iOS devices can actually visit them. I can still watch YouTube videos et al. About the only thing I can't do is play Flash games... but they're a resource hog anyways.
Try going without for a day or two and see just how many sites you visit no longer require it. A lot of people keep it installed out of habit, not out of necessity. If you have Flash installed, visit a site and it's out of date, it will tell you to update your Flash. What it won't do is tell you is that had Flash not been installed, it would have used the HTML 5 code instead. Think about it... if an iOS device can't run Flash at all... it can't visit this site if it were written only to use Flash. What site would eliminate such a huge portion of their market base? You'd be surprised at how many sites use HTML 5. Uninstall Flash and see for yourself.

What is the proper and best way to destroy a java.util.List or Array for GC

Hi,
If I have a java.util.List of objects lets say:
List<File> files = new ArrayList();The List contains 1000 file objects. When my class finishes, is it enough to do
files = null;to make GC able to release it from memory?
Cause it seems like I can't do the following:
for(int i = 0; i < extracted_files.size(); i++){
extracted_files.get(i) = null;
}Or should I use this one:
files.clear()What is the proper and best way to do this in order to avoid memory leaks? How about normal Arrays like File[]?
Edited by: TolvanTolvanTolvan on 2009-sep-10 16:58

TolvanTolvanTolvan wrote:
Thanks for the info!
But what if the List is a class variable running in a Web Service for like months without terminating?You mean if the List variable is a member variable of a long-lived object? Then presumably the list needs to live as long as the object does. In the unlikely scenario that the object needs to live on but its list member variable does not, then yes, setting the member to null will be needed to make the list eligible for GC. But I highly doubt this is your situation, and if it is, you probably have a design flaw.
And if the list is referenced only by a local variable, then, as I already said, when the method ends, the variable goes out of scope, and the List is eligible for GC.
Now, a slightly different situation is when the List needs to live a long time, and at some point during its life, you're done using some object that it refers to. In that situation, simply remove the element from the list (or set the element to null if it's an array rather than a list), and then if it's not referenced anywhere else, it can be GCed.
How about Arrays like File[]? Do I need to iterate through the array and null all the objects or is it enough to just null the Array?YOU. DON'T. NEED. TO. HELP. GC. You don't need to set the elements to null, and you most likely don't even need to set the array variable to null.
Also note that only references can be null, not objects.

Best way to update individual rows of a Table?

I've taken a look at some examples, though haven't gotten any clarification on this. I am looking to have something close to a listbox or table to where I can update just a single column of row values at a 1 time per second pace. I am looking to display our data-acquisition values in a table or listbox. The single listbox seemed to work good for this, but I was unable to use row headers to list the channel names next to the channel values. I was thinking about connecting the cursor values of two list-boxes to do this, but didn't find any info on this for the single list-box.
I have a few questions:
1) I have a 1D array to where I want to use that array of data to constantly update the first column (with a multitude of rows) of a table. I am looking for the best route so as not to take up too much processing time in doing this.
What is the best way to update individual rows of a table? Invoke Node "Set Cell Value" ... or is there another method?
2) Why is it that after every other iteration the row values are erased?
Also, for adding additional strings to the original arrray ... is it best to use the "Array Subset" and then the "Build Array" function, or the "Array Subset" and "Insert Into Array" function?
See the attached example.
Thanks.
Solved!
Go to Solution.
Attachments:
Table Example.vi ‏19 KB

Jeff·Þ·Bohrer wrote:
2) Why is it that after every other iteration the row values are erased?
Classic race condition. dump the for loop and p-node and just wire the 2D array to the table terminal.!
I'm not seeing the race condition. What I am seeing is the table emptying after the last element was written to it on every other run. I saw watched this with highlight execution on.
But I'm in full agreement with just writing to the terminal. It is a 1D array, so you will need to use a build array and transpose 2D array in order for it to write properly.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Best way to update audio files in library

I have quite a few audio files in the library for a Captivate project. I just modifed a bunch of them, and I am wondering the best way to update the library.
If I delete the files in the library, I lose all the links to which audio went with which slide.
If I go into each slide and replace the audio, that is more time consuming, and still a problem when the old audio file is still in the library
I don't see an option for directly replacing the audio in the library; if I put the new version (same name) it just adds it with a (2), i.e. audioclip and audioclip(2)
The update option does not give me what I need, unless I am missing something. First of all, I am using both a Windows computer at the client site, and my own Mac, so the paths are different. To use the update I would have to update the path for each audio file, which is more trouble that updating every file manually.
Any ideas?
Thanks.

Hi there,
The recommended way is to go to that slide and import the slide audio again, new audio will replcae the old.
Once you have replaced all the audios, the audio files that are not in use in the project will still show up in Library.
You can get rid of all unused items from the library, by clicking on the icon for unused icon and then delete icon:
Thanks.

Best way to update firmware?

Hi everyone,
I just wanted to ask you which is the best way to update the firmware for my phone?I mean with usb cable,FOTA etc.
Thanks in advance!
Regards

Nokia seems to be comitted to improve the user experience... Its really good to know that... They have to do it to survive... BTW Nokia N78 latest firm ware is a little better. The operations seems to be fast.
It has just been a day with the firmware.. So far no problem... I faced a few problems while updating the USB get disconnected when the update is about to begin... but the latest software update program has all required warning... It asked me to restart my pc and my cell phone... And try again ... I did it Alas it worked ... got it updated ...
I found a few things new :
The icons for videos (The one in old version was better) and search are all new.
I am from india. I brought this phone seeing the FM transmitter option. But after i brought the phone i found it missing.
But with this software update i got the option under the music menu :-) thanks a lot nokia.
Few problems with the camera still remains... music volume has come down a bit... the gps seems to be working a little faster.

Best way to update DR database from PROD server automatic ?

Hello Gurus,
I want to decide best solution.
Goal: Best way to update DR Database from PROD Server Database automatic.
System: 32 bit Linux system with Oracle Database 10g Release 10.2.0.4.0 - Production (database version) Oracle version is standard.
Please let me know how i can update my DR server with PROD data and this task should be automatic.
Please ask me more information if required to solve this issue.
Thanks- Priyank
Edited by: Oracle DBA P on Nov 19, 2010 3:06 AM

you mean to say data guard needs to implement ? i think that's one option but what you said is different ?
tell me procedure how i can implement your idea ? steps i have to perform.
Thanks
Edited by: Oracle DBA P on Nov 19, 2010 3:38 AM

Best way to update drivers?????

I'd like to get advice on the best way to update my MB drivers.
If I update my NVIDIA nForce4 System Driver, does that update my AMD 64 4000+ CPU? or do I need to go to AMD's site and get that update??????
I'm new to this building PC's so please bear with me. Thanks==db

No, it does not update the drivers for your CPU, you have to go to the AMD site to get the drivers for the CPU, and also get the drivers from nVidia.
Be well....

Best way to update a polygons position?

What is the best way to update a polygons position? I don't want to create a new one each time, and there is no setBounds method.

I'm sorry. I meant. Say my array of x positions is 3, 4, 9. I change 9 to 30. How can I make the polygon see that change?

Best way to update AC97 audio drivers?

Is the best way to update AC97 audio drivers = dl. from msi the latest drivers which are 5.10.00.5970 (A3.80) I currently have 5890. Then uninstalling old ones from add-remove programs then install newest ones. Since live update doesn't seem to get it done. Thanks
Den

I agree with the package that is in Dr Stu's link, I downloaded that complete package which includes NVMixer for speaker setup and fine tuning your sound system.
Regards; Pop's

Best way to update apps

Is the best way to update apps through the ipod touch or through the computer to which the ipod syncs?
I once updated the apps on the computer and synced my ipod with the computer but the apps on the ipod touch were not updated. Is it because the sync was not properly done?
Thanks.

the best way is to install all apps and updates from your computer. this will also drastically decrease your backup time. i recently deleted all my apps and reinstalled them from my computer, and my backup time dropped from 9 hours to about 10 mins. i was told this was prob caused by orphan data and errors from installing from the app store on your touch.

Best way to update exposed schema as WCF service ?

Hi,
I am newbie to WCF + BizTalk. I am doing small POC's on exposing & consuming orchestration & schemas as WCF service. I had successfully exposed schema as WCF service also consumed this service using C# client code.
My question is that suppose if there is a change in the existing exposed schema say a field has to be added then what is the best way to update a service. Do we need to add a field in schema & again expose this schema and update our service referernce
in the client code ? Or this can be achieved in a better way ???
Regards,
Rahul Madaan
BizTalkVillage.blogspot.com

Hi Rahul,
When you expose Orchestration or Schema as a WCF service and let's say if there are only few fields which got updated/added then there are multiple options to handle it.
For example-
1) You can go ahead and update the XSD files within AppCode folder. You can find this folder by doing explore on web application(in iis manager). Whenever we expose schema or orchestration these schemas are generated and kept in this folder. When you check
the WSDL it will have reference to these schemas and they will define the contract of incoming and outgoing message(request and response). This is the easiest way. I prefer it for Dev environments and testing.
2) But I would suggest you to run the publishing wizard again as it's less error prone.
Please understand that BizTalk will always remain unaffected of the type of message it receives from the isolated host, the actual problem comes when hits the first receive shape(typed message).
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful.

2.1 Out and Best way to Update if you are a mobile me subscriber's

Similar Messages

Maybe you are looking for