2.1 Software: Fix needed for YouTube

Hi everyone, I noticed that, after updating Apple TV software to the newest version, search input in Youtube section doesn't allow me to cancel, put a space or a symbol in the search query...
...did you encouter the same?
do we need a fix patch?

Sorry, It doesn't work any more... I's only worked once... could u please be more precise in explaining the exact procedure?.. I keep moving to the list of videos on the RHS but nothing happens...
thanks.

Similar Messages

What software is needed for system recovery? (cont'd)

What software is needed for system recovery of a Toshiba Satellite Pale8u-02p01D (also known as L355D-S7901) running Vista?
If I can just get the name/number for the recover software I will get it from eBay.
Thanks!
Solved!
Go to Solution.

Satellite L355D-S7901
If you want to look for that on eBay, look for the recovery discs for the model above. I doubt you'll find them there.
You can order them from Toshiba, of course.
   Order Toshiba Recovery Media
And you might get them cheaper from a third-party vendor.
   Digitalmedia-labs.com
   MyRecoveryCDs.com
   Recovery-CD.com
   RestoreDisks.com
   RestoreCD4u
-Jerry

MSI 1950pro VIVO. What software I need for video-in?

Hi.
I am currently using MSI radeon1950pro pcie card. It has VIVO connector too. I tried yesterday to plug my Playstation2 to the card as I dont have TV, well i didint get to play as i dont know what software i should use for that. I installed ati's suplied radeon1950 pro driver package. I also tried to install wdm driver, and some multimedia center stuff, which promptly notices that it will only work/install with all-in-wonder card.
I also tried with Dscaler and AMcap, but neither of them can find any video capture driver or so.
I would need to get analog videosignal opened in some program that can handle fullscreen mode, so I could play my Playstation trough my PC screen
Someone who has done something similar, or just done something with video in pls tell me what software I need..

I have catalyst 6.11 installed.
I have also installed WDM driver, at least the installer goes trough.
I have installed also avivo decoders/encoder files from ati, in addition to this i have installed multimedia center, and some extra kits for it. Like dao/mac, dvd/dtv decoder and some encoder package. I have installed practically all files that i can find from ati.
Firstly i notice that multimedia center installation creates zero shortcuts, so finding this software is bit hard. Or if it did not install anything, the installer didint notify me, just quit .. cant be sure about this.
I have also installed Dscaler (tv viewer, that should be able to read video-in, atelast from nvidia cards). I have also installed microsoft media encoder, which is somekind stream capture tool / video encoding tool.
Problem is that no software detects that this card has VIVO.
I need to know how to get some damn driver installed so that the video-in comes as visible capture device and then some program to show it.
Is this somehow related to fact, that ati is offering different driver kit for 1950pro cards? I tried with those drivers yesterday, but they didint help at all.
am I doing wrong?

Bluetooth driver fix needed for Windows 8.1 new install

I recently did a clean install on my Lenovo Thinkpad T61P of Windows 8.1. Bluetooth is missing in PC Settings but does show up in services and it is enabled and set to automatic. Don't think that matters as the program or drivers are missing. Can someone direct me to the proper download link to get this installed and showing up in PC Settings so I can get it running? I cannot find proper download to install and this is a well known issue as I have upgraded from a XP system.
thanks in advance

thanks for replying. As I was waiting for some answers to how to fix this bluetooth issue, I was continally bombarded with this popup window for time and date per the side window screen when you scroll over by it. I tried fixing it and decided to go into the mouse properties in Control Panel, went to mouse, and then into Ultranav. I unchecked the second feature that evidently froze my cursor, and now I have no cursor at all. I have booted up and as soon as I enter my login pin, I lose the cursor. I have tried system restore but it wants my anti virus disabled and I have not been able to do it. I have gone bake into the same settings feature to enable, but as soon as I do, it immediately transfers me out of the Ultranav properties menu.
Short question, Can I boot load the new driver into this OS that it needs? I do not see this driver as a property for my touchpad. I suppose I could get a mouse and try it, but do not have the USB end for the ones I have. Any idea how to get this Ultranav driver loaded without any cursor? I have no idea and system restore does not work without disabling antivirus and I cannot do this without cursor. Tried to boot to safe mode but I have not been successful as I don't know how evidently. Any suggestions would be appreciated then I will get back to you on the bluetooth issue.
thanks
edit to say I found a laser mouse and inserted it and it did get my cursor back. I have not disabled antivirus and doing another system restore. Two points come up as a result of this. How do I disable my antivirus using Windows 8.1 on a laptop that does not have FN + F8 option? Is there a file you can install to get this nice bootup option to work?
Second. is it possible to put a shortcut on the desktop or startup page for system restore. Maybe it is in the programs section as I just now thought it may be there but can't look right now as doing a system restore.
Finally if anyone can tell me the current drivers to download and install for a Lenovo T61P using Windows 8.1 for the updated Ultranav files and also the bluetooth recognition file. I will get back and answer your questions on what is seen as soon as I am up and running again, which should be shortly.
And if anyone has the answer to disabling the popup date and time window in lower left hand corner when the charms menu is activated, I would greatly appreciate it as this drives me crazy. this is how I got all these things messed up to begin with.
thanks and I hope this is not confusing.

Syntax error fix needed for "...getHelperForLanguage: function(language) null,..."

Getting the syntax error, and having limited technical experience, I do not know how to fix the problem. This is in regard to a web site asset, an mp3 file. I am having problems getting such files to play within Chrome (though they play in Internet Explorer, for instance), so I am trying to troubleshoot from within Dreamweaver, as well as from the Chrome extensions side.
Here is the line including the syntax error, with additional lines
    getInterfaces: function(countRef) {
        var interfaces = [Ci.nsIDOMGeoPositionCoords, Ci.nsIClassInfo, Ci.nsISupports];
        countRef.value = interfaces.length;
        return interfaces;
getHelperForLanguage: function(language) null,
    contractID: "",
Thanks for help.

Use HTML5 <audio>.
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>HTML5 Audio Demo</title>

</head>
<body>
<audio controls>
<source src="path/yourSong.ogg" type="audio/ogg">
<source src="path/yourSong.mp3" type="audio/mp3">
<p>Ooooops. Looks like your browser is out of date and doesn't support the audio tag. Please upgrade to a modern browser.</p>
</audio>
</body>
</html>
Nancy O.

Adobe Flex Software Engineer Needed for Start-up Company in Pittsburgh, PA

Flex Programmer/Developer/Coder – Pittsburgh, PA
ComPePrice LLC is looking for Adobe Flex developer.
* Requirements:
• 1+ years experience programming with:
   o Object-oriented development in ActionScript 3.0/2.0 with Flex/Flash
   o Creating custom components using both MXML and ActionScript
   o Remoting data services such as Blaze DS
   o XML and schema definitions (XSD)
• Knowledge of software lifecycle best practices including:
   o technical requirements analysis and documentation, source control systems, issue tracking systems, and testing & validation.
• Attention to detail; ability to solve problems; ability to learn and adapt to different technologies.
• Java, SQL, Relational database systems, and UML experience a plus.
* Overview of ComPePrice.
ComPePrice LLC, is a Pittsburgh-based online start-up company founded in 2007. The company is managed by 3 team members together with experts and advisors from professional industries and the Carnegie Mellon community. Currently, ComPePrice is the parent company of an online video sharing company providing users a collaborative environment to create, share, and organize content with their communities. ComPePrice hopes to shape the next era of online video sharing by offering tools for users and businesses to efficiently share truly informative videos.
The management team is currently raising seed investment to gather an IT development team.
* Products and Services:
ComPePrice’s newly formed online venture will provide the following:
• Products:
   o Video Mapping Tool: Our patent-pending online tool will enable users to collaborate to efficiently search and navigate and generate informative,    valuable videos.
   o Video Information: Using our patent-pending Video Mapping Tool, users will collectively create videos that eliminate redundant or meaningless videos, thus forming a knowledgebase for business partners.
   o Advertising Tool: Marketers can effectively promote their businesses by adding their marketing messages to the various channels available through our website and the Video Mapping Tool.
• Services:
We will provide customized or consultancy services to businesses who wish to utilize our Video Mapping Tool to their websites by means of licensing or subscribing to our service.
* Divisions/Departments:
Management Team (Strategy & Planning, Marketing, Sales) and IT Development Team (System Administration, Software Engineering, Database Management, Product Development)
* Achievements:
ComPePrice currently holds two patent-pending business methods,
Interested, please send your resume to [email protected]

Please post this in Flex.org

Does anyone know what software is needed for an HP A799 POS receipt printer?

I'm trying to use the A799 receipt printer to open the register drawer. The software I have does not have a configuration for this, so I'm guessing I do not have the right software. It prints fine, just doesn't open the drawer.
This question was solved.
View Solution.

I found the solution!
SOLUTION:
Download and install HP USB Receipt Printer Firmware Upgrade (sp34185) from the following URL: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ir-454...
Finish the printer installation by completing the following steps:
1. Go to Start > Settings > Control Panel > Printer and Faxes > Add printer .
2. During the Add Printer Wizard process, you will be asked to select a port. In the drop-down list, select a USBxxx (Virtual Printer Port) port.
3. Browse to the location where the printer files are located, and select TPG A794 CD#1 Full and install the printer.
4. Once the test page is printed the drawer will open automatically. NOTE: The TPG A794 CD#1 version generates a pulse to cash drawer 1 after each document, opening the cash drawer.
Even though this is listed as a solution for the RP5000, it worked perfectly on the RP3000 using the HP A799 printer.
NOTE:
The TPG A794 CD#1 version generates a pulse to cash drawer 1 after each document, opening the cash drawer.

Software advice needed for "Video Blaster" Webcam "Go"

Hello All,
I recently purchased a "Webcam Go" and the software I received with it is only supported by Windows 98. I run a Windows XP platform. There is no Creative Labs software to support teh Webcam Go in teh archives.
Could someone give me advice on what to use, even if it's proprietary shareware? Any help will be greatfully appreciated!
Very Best Regards,
Joe Cro
Message Edited by n3ibx on 09-25-2006 07:55 PM

No still its not working my system reboots and a blue screen appears plz help

What are the Standard Software Components needed to devolop Portal DC?

Dear all,
I am trying to port the code from local portal project to
DC Portal Project.
i think i have to add dependencies in the 'Used DCS' in the DC Project for the Corresponding Build Path Entries(jars).
But iam not getting the Standard Software Components where i will get the references for
<classpathentry kind="var" path="<b>ECLIPSE_HOME/plugins/com.sap.ep.applicationDevelopment/prtapi.jar"/></b> <classpathentry kind="var" path<b>="ECLIPSE_HOME/plugins/com.sap.ep.applicationDevelopment/prttest.jar"/></b> <classpathentry kind="var" path<b>="ECLIPSE_HOME/plugins/com.sap.ep.applicationDevelopment/com.sap.portal.runtime.application.soap_api.jar"/></b>
Please tell me the Software Components needed for Portal Development while Defining Track.
regards,
Biroj.

I am assuming the following:
SAP_BUILDT
SAP_JTECHS
SAP-JEE
<OWN COMPONENT> (with as prerequisite SCs the above three)
If you had found this out already, please post in this thread.
Thanks,
Jurjen

What kind of virus and malware protection do I need for my new iMac?

I am new to Apple computers, what virus or malware protection do I need?

Agreed, please read Thomas's guide!
As a general rule of thumb though, no additional software is needed for malware or virus protection. Apple computers are incredibly secure, the best protection is running Software Update often and not downloading from illegal software from torrent sites. Other than that, OS X is incredibly secure and best left alone to run well.

I get no sound for YouTube or music when headphones are out. Speaker phone works fine. It appears to be software issues. Any ideas?

I have an iPhone 4s w/iOS 5.0.1. YouTube and music player do not produce sound w/out headphones being plugged in. The speaker phone and other phone sounds continue to work properly. The volume buttons on the side of the phone do not control volume unless the headphones are plugged in. When you go to 'settings' then 'sounds' and make sure 'change with buttons' is selected, the volume bar will not move with the buttons until I make the volume change on the bar with my finger - then the buttons control the volume bar (but still no sound for YouTube or the music player without the headphones). It appears to be some type of software issue. I have read the post about theap home thinking the headphones are still plugged in, but that would not explain why some sound works and others do not. Any ideas?

Hello tiffay8,
Thanks for using Apple Support Communities.
From your post I understand you're not getting any audio output from your speakers when you're playing games. Follow the steps below to resolve the issue:
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved, please contact Apple Support.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Take care,
Alex H.

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

Hi have just purchased iphone 4s . my itunes on my mac is currently 10.4 . 10.5 is needed for the new iphone but when i download it and click on install the itunes about still says 10.4 . have tried to update through itunes but it says there is no softwar

hi have just purchased iphone 4s . my itunes on my mac is currently 10.4 . 10.5 is needed for the new iphone but when i download it and click on install the itunes about still says 10.4 . have tried to update through itunes but it says there is no software available for me . please help . mr frustrated

If your computer is running an OS X prior to Snow Leopard 10.6,
the answer (if it is an Intel-based Mac; not old PowerPC model)
would be to buy the retail Snow Leopard 10.6 DVD from Apple
for about $20, and install it. Then update that to 10.6.8 by using
the installed Snow Leopard online to get Combo Update v1.1 for
Snow Leopard 10.6.8. After that is installed & updated, run the
system's Software Update again, to see what else is available to
that system.
Later systems can then be looked into at Mac App Store, once
the computer is running Snow Leopard 10.6.8.
And if your computer is a Power PC (G4/G5, etc) and has no
Core2Duo kind of CPU -- See "About this Mac" in apple menu
to disclose the general info about your Mac. Also you can see
even more by clicking on "More Info" when looking in there...
If it isn't an Intel-based Mac, it can't run a system past 10.5.8.
Hopefully this helps.
Good luck & happy computing!

I need help with exporting 720p video for youtube.

Hi everyone, I have been using Adobe premeir for almost a year now and I love it, as its very professional and powerful. I used to edit Standard with no problem, then export the full unconverted file (wmv) and run it though Windows Movie Maker to compress it (haha yeah I know its crazy.) Now that I got a camera capable of shooting HDV I want to use it. Im just wondering the following:
1.What format should I export with in Adobe Media Encoder? (Original Raw footage files from Camera are MOV formatted)
2.What should I set the Bitrate to?
3.How do I export to flash without it being to large of a file (Under 200mb's for a 5 minute video) and have it not choppy or pixelated?
4.How do I speed up exporting, how many passes should I do?
5.What overall is the best setup for youtube?
I also noticed a small glitch, and its when I export normally (full size, no compression) and run it though a compressor it cuts out all of the titles, and just flashes them for a milisecond. Its really odd. It only happens when I export in a certain format in which I cannot quite remember. Anyways.. thanks in advance for helping me. Its very appreciated.
NineLivesProductions

perform a search using the term export for web and it should throw up some ideas.
here's one for starters:
http://discussions.apple.com/thread.jspa?messageID=2309121&#2309121
If you're using flip4mac to convert to wmv, the trial stops at 30 seconds - you need at least wmvstudio to export to wmv:
http://www.flip4mac.com/wmv.htm

Advice Needed for Audio and MIDI Controller Software

I am hoping someone may be able to give me advice on how I should approach my problem.
I am currently running a live show with audio backing tracks and a small 12 par lighting system. The light system can be controlled via standard MIDI. I am using iTunes to play back sets of backing tracks, and manually controlling the lighting system using a dedicated foot controller.
What I would like to do, is be able to use software to simultaneously play audio files and perfectly sync the lighting (fades, shots, etc. via midi) with the audio track. Ideally, I would be able to have the audio/lighting paired as discreet entities that could be grouped into sets.
i.e.
Audio-MIDI_1 = Audiotrack1 would always be paired with Lightcontroller_MIDI_events1
Audio-MIDI_2 = Audiotrack2 would always be paired with Lightcontroller_MIDI_events2
Audio-MIDI_3 = Audiotrack3 would always be paired with Lightcontroller_MIDI_events3
I could the create a set of Audio-MIDI_x tracks which could be triggered in any order.
I would like to have to option to be able to activate a single track, or have a complete group of tracks activated sequentially (but be able to stop the and start the group as needed - you never know what will happen in a live situation). It would be nice to have a time-line UI as well.
Now the final requirement: it should be able to run on a PISMO PowerBook. <cringe>
I hope I am not too confusing.
I am thinking MainStage would not be the software for this task as Leo is not an option for the Powerbook.
I have looked at QLab and showcontrolpro, but I don't think theses are right for me either.
Any help or suggestions would be greatly appreciated.
TIA

Gary,
With a Pismo you really are confined. I've been using some software from Alien Apparatus called Solo Performer Show Controller (www.alienapparatus.com) and it has a timeline to sequence lights where you can run 32 channels of midi or dmx lighting. The only setback is it needs at least a 1 GHZ processor. There may be a company like Sonnet that has an upgrade for your processor.
The software is able to run backing tracks, send midi controls to effects units or other software, send hotkeys for apps, synchronize lyrics in a window or on an external monitor, controls a dmx fog machine, and also has a six button usb foot controller which can be configured for many things such as scrolling your songlist to select the next song, change volume of tracks, change a light scene, send a hotkey, trigger samples, etc. It is a bit pricey at just under 600 dollars but the foot control is durable, the company has excellent support and they listen to users to add features to the software.
Hope this helps
Thor

2.1 Software: Fix needed for YouTube

Similar Messages

Maybe you are looking for