2.1 update on vista 32

everytime i launch the update, it says "the installer encountered errors before boot camp could be configured" and it gives me option to "finish" which quites the thing. i downloaded it many times. the apple update thing says the same thing. is there a way to uninstall boot camp and then install the new one?

got rid of windows hahaha

Similar Messages

Microsoft Updates to VISTA ULTIMATE clobbered audio

Qosmio F45 AV-411
Why is my audio getting clobbered when I install MS Vista updates?
The first time this happened was when auto update installed .NET Framework 3.5 SP1 back on 2/26/09. I deinstalled this update and the audio worked again. Now on 4/15/09 I installed selected updates (1 Defender update, 6 Vista Security updates, 1 Windows Mail Junk email Filter, and 1 Security update for 2007 MS Office, and1 Security update for 2007 MS Office Excel). Don't know which update clobbered my audio.
I'm getting tired of this! Is there something I can do to restore my audio and stop this from happining in the future?
Thank you in advance for your input!

Qosmio F45-AV411
Not unusual for Windows updates to mess things up. Microsoft offers this.
   How to troubleshoot sound problems in Windows Vista
Your driver is here.
   Realtek Audio Driver for Windows Vista
Microsoft offers free support for Windows update problems.
   E-mail Support
-Jerry

Sr5604f updated windows vista but now it reboots the config over and over

need hip,,pls help sr5604f updated windows vista but now it reboots the config over and over

need hip,,pls help sr5604f updated windows vista but now it reboots the config over and over

Adobe Bridge CS3 2.1 Update and Vista 64 bit

I updated my CS3 applications using the Adobe Updater.
Now when I launch Bridge (either standalone or through one of the other applications in the suite) Windows immediatly reports that Bridge "has stopped working", closes the application and says it is checking for a solution. Needless to say no solution is found.
Bridge was working fine in Vista 64bit before I used the Adobe Updater.
Anyone else seen this?
Below is the Windows Vista "Problem Report and Solution" signature for the event:
Problem signature
Problem Event Name: APPCRASH
Application Name: Bridge.exe
Application Version: 2.1.0.100
Application Timestamp: 465ce93c
Fault Module Name: QuickTimeStreamingAuthoring.qtx
Fault Module Version: 7.2.0.240
Fault Module Timestamp: 4684a83a
Exception Code: c0000005
Exception Offset: 00016c09
OS Version: 6.0.6000.2.0.0.256.1
Locale ID: 2057
Additional Information 1: 4edb
Additional Information 2: 9240e826603dd5a3076c4757e237232f
Additional Information 3: 6dbe
Additional Information 4: 056748c7b224c0580db04342d0abcc3b
Thanks
'b' Steven M Brown

Bridge CS3 crashing on E6600 DUO Core w/4gig ram two terabytes of drives. Vista Ultimate 64
I too have been encountering the mysterious Bridge crashes .."Stopped working.." .."insufficient disk space to complete."..
and .."insufficient memory .." when processing images in the RAW Plugin. Thiss has been going on for weeks and has been quite frustrating. And yes..this started after using the Adobe Updater ..
Note one line of the Bridge Error report lists:
Fault Module Name: QuickTimeStreamingAuthoring.qtx
I don't know what Quick Time has to do with Bridge ..but..
I went to Apple & got the latest Quicktime for Vista 64..and ALL the crashing problems have ceased! I have even turned back on "MULTI-PROCESSOR" Support. Running smoothly...
So what does Quicktime have to do with bridge image processing?
Please & thanks

Disable JRE Auto update in Vista for all users?

I feel like a complete idiot that I can't figure this out, but it's either so obvious I'm overlooking it, or I just plain can't figure it out, so I'm hoping someone here can help.
We have not yet been able to figure out how to simply disabled the Auto Update option when installing JRE under Vista, so it will never check for updates, no matter what user is logged into a pc. I've just installed the newest version 1.6.0_05-b13, but get the same results.
Basically, we are creating a "base clone image" of a Vista workstation and we need the auto update feature of the JRE to be disabled so it doesn't check for updates. When a new user logs into the pc, we want them to 'inherit' this setting from the default user profile, or we simply want a 'global' setting on the pc that stops all JAVA update checks from occuring. But even though there are multiple registry keys that 'look' like they control the auto update function, no matter how we set them the update option still shows it is enabled when you open the JAVA control panel.
We have 2 basic problems:
- When a standard user runs the JAVA Control Panel applet and they select the 'Update' tab, the option to "uncheck" autoupdates is "grayed out". If we make the user a local administrator, then it is not grayed out anymore and they can set the option. Problem is, we have thousands of users and none of them are local administrators, hence the problem of getting it to already be defaulted to not check for updates. How do we get the update checkbox to NOT be grayed out for a NON-administrator?
- How do we set the 'global' (or default) option to disable the auto update checkbox for ALL users? No matter what we try, when a new user logs in, the auto update feature is still enabled after their initial profile is generated from the first time login.
I was able to figure out if I change the "EnableJavaUpdate" value in the below registry key, it will "remove" the Update tab from the JAVA Control Panel. But does the simply remove the tab? Or does it remove the tab AND disable auto updates for ALL users on the computer?
HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Update\Policy
I've sent multiple emails to Sun asking for help on what should be a simple thing to do, but have never received a reply from them.
Keith Hemmelman

Thank you for the reply. I apologize for not getting back here sooner.
We actually already use a deployment.properties file located under the Default User profile on our Vista setup. It's located under the "C:\Users\Default\AppData\LocalLow\Sun\Java\Deployment" folder. This file does get copied over to a new user profile when a new person logs in. This is what we want since we have set things like the maximum cache size and temporary file location.
The problem though is there is no setting that disables the automatic update check within this file. The best I can figure out is that for some reason under the Vista environment, the auto update setting is controlled in the registry at: HKEY_CURRENT_USER\Software\JavaSoft\Java Update\Policy
There is a REG_BINARY key there that appears to control this option. It is named "EnableAutoUpdateCheck". The problem is that the value of this key is "several" characters long and it is "different" from one user to the next. I tried disabling auto update under the Java Control Panel and then copied the value of this key into the same aread of the Default User hive but when a new user logs in, it ignores that setting and auto update is still enabled. I also tried using a simple "0" to disable the autoupdate or a "1" to enable it for this key, but it doesn't work either. (This is very frustrating why there isn't a simple 1 or 0 setting to turn the auto update setting on/off.)
We had no problem getting this to work under XP. Basically we didn't have to do anything special in XP. We simply created a temporary user account and made all the settings we wanted and then copied that profile over to our Default User profile and the Java autoupdate setting under the Java Control Panel was disabled for all new users. We did the same thing under Vista, but the auto update setting was ignored and re-enabled for all new users.
I read through the settings for the deployment.properties file located at the below link, but there is nothing there to control the auto update setting.
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/properties.html
Thus, we can't get the auto update setting to be disabled in the default user profile so it will in turn be disabled for all new users that log into the computer. This is extremely frustrating.
The other equally frustrating problem we have run into under the Vista environment is that when you run the Java Control Panel, the option to disable the auto update check is "grayed out" and the user can't uncheck this option to disable auto update. We have found you must be an administrator before this option is no longer grayed out. Since none of our thousands of users are admins, this is also a problem for us. (This option works fine for a standard user if you are on a XP machine though. It's just Vista where things have changed.)
I've sent repeated emails to Sun in the past asking for help, but they never replied.
Keith

Why two QuickTimes with Apple Software Update in Vista under Boot Camp?

Running Apple software update in BootCamped Vista, I see selection for 1) QuickTime, 2) Safari, 3) iTunes & QuickTime.
Items 1) and 3) are by default checked for download. Why would I want to download QuickTime twice??

Hi!
Funny you should mention that! Same thing happened to me yesterday, I was downloading Boot camp 2.1 and there were the other three downloads you mentioned. I downloaded them anyway. I now have Safari 3.2.1 (etc.) on my Windows partition. Why did I do that ? To be frank I do not know!! Now you have all three on the Windows partition.

Not able to install live update with vista 64bit

I got a MSI P45 NEO-F board with Intel 2 duo E8400 processor, and VISTA 64bit.
I'm not able to make the live update work, the CD-ROM following the card does support vista, but not the 64bit version. After having tried updating everything else to make my computer stop crashing when playing Age of Conan, I would like to see if an update of the bios will help. I would rather use the MSI updater than do it my self, as I don't want to take the extra risk.
I've checked core temperature, RAM temperature, memory leak seems not to be the issue either, and I got the last driver for my videocard (v8.9 for Radeon HD 4870 512MB). At any given time the sound loops, picture may freeze and pixel or just go to brown stripes, and I then need to force a reboot. Some times the system has BSODed by itself as well.
Current BIOS is v1.1, I think there is a v1.5 now.
Is there a live update supporting vista64? Or a receipt for dummies how to do it manually? The AMI BIOS Flash procedure following one of the BIOS-versions that I *think* I can use doesn't include an explanation for vista.

Quote
2x2GB DDR2 RAM CL5 Dimm's (Corsair TWIN2X)
Can you provide a link to the Corsair Datasheet or post the full model/serial number?
Quote
Intel 2 duo E8400 processor
Is that an E8400 C0 or an E8400 E0?
E8400, C0 --> sSpec# = SLAPL
E8400, E0 --> sSpec# = SLB9J
You can find the sSpec number here:
Have you tested your memory with memtest86+? If not, please do that and make sure the each of the 10 individual tests runs at least once.

Update for Vista for Labview 8.0 (student version german)

Hallo ich habe folgendes Problem, ich habe ein Studentenversion von Labview 8.0, die auch brauche, aber ich kann diese nicht richtig nutzen, weil ich als Betriebssystem Vista verwende.
gibt es irgendein update oder patch das es ermöglicht, Labview 8.0 unter Windows Vista zu nutzen. Da ich auch nicht die Finanziellen Mittel besitze mir Labview 8.5 zuzulegen, welches laut meiner Internet-recherche Vista-kompatibel ist.
Gruß Erik

Wenn ich den Laptop starte bekomme ich eine Fehlermeldung, dass das Programm nicht mehr nutzbar ist und eine Option zum Schließen.
Wenn ich mit dem Programm arbeite und es schließen öffnet es sich immer wieder neu. Ich kann es nur schließen wenn ich den Rechner ausmache.
Es werden nicht alle Funktionen geladen, bei den fehlenden Funktion wird dann ein Fragezeichen angezeigt oder sie fehlen einfach komplett.
Beim Staren soll ich immer Pfade für VI´s angeben, wenn ich das versuche funktioniert das auch nicht.
Das heißt also, das keinen Patch für Vista gibt?
MfG
Erik K.

Trouble installing latest updates on Vista

I received a notification of updates for PPro and other components of production premium. After downloading, the install would not complete. The status bar would get about one third the way complete, then start over at the beginning. This cycle will go on endlessly. I am trying to install on a Vista based PC.
Any suggestions?
Thanks.
Jeff in Florida

I have had no descernible problems with Vista. I have it on both a desktop and notebook. I run Adobe Production Premium on both, although I am not a professional in the vid production business. All apps seem to work fine including video, animation, effects as well as standard office apps, web, and others. Once I turned off the UAC everything worked fine. I also have 3 computers with XP, but the computers are Pentium 4 vintage. My newer computers are Core 2 duo types, so comparison of pros/cons of the OS is problematic. I really have not had any problems on the Vista machines with hanging or other issues. 2Gig of RAM in each of the newer machines which I will be upgrading to 4. Vista seems to have quite a bit of security features and I wonder if the inability to install the updates is related to this security issue.
Again, help from those using Vista and experienced the same is welcomed.
Thanks everyone for your help.
Jeff

10.5.6 Update Broke Vista

I have Vista Ultimate installed on my Macbook White and everything was working wonderfully. Until I installed the Update from Apple today. I booted into Vista and started to get random but frequent freezes rendering Windows completely useless. I had experienced these freezes before back during 10.5.4 but they were no where as bad. It was either 10.5.5 or a windows apple update that fixed it. But i can't find any new windows apple updates sooo.. i am currently SOL. Is anyone else experiencing the same problems? Did 10.5.6 change anything like EFI or firmware that would affect vista? Can I rollback or uninstall 10.5.6?

It's fixed now, these are all my steps & results:
1) I suspected generic wireless card - plugged in wired ethernet, turned off Airport. Clock worked for about 2-3 restarts only.
2) Used Ext. Firewire HD. and loaded Original G5 10.3.5 discs. Clock improved to 2001 : ) Still would lose time after restart. I set clock manually & with server and neither would keep after restart.
3) Got new problem when I used Firewire HD. On a restart G5 seemed to load, but no video. (I have a Samsung 940bw widesrceen) A problem I have had before, so I tested it on a different monitor. G5 booted immediately on my brother's Sony in 1024x768 and readjusted to 1200x1024. But kept clock problem.
So I opened up G5, removed & reinstalled my ATI 128MB video card. Also removed wireless card and went back to ethernet just to be sure. Reset PMU. G5 again worked with my Samsung.
4) My brother thought it might be the HD, but I ran TechToolPro 4 and hardware test seemed ok. (previously I just ran it just to fix OS)
5) So He suggested I used the standard Windows repair solution: complete wipe & fresh install. I have always used the upgrade & save old OS on my G5 and not had problems. But since I have had it for 5+ years w/o a new install, I went ahead & used it as an excuse to do some spring cleaning on my unused apps. & files.
I loaded everything on my Firewire HD (listening Apple?) both from my main HD and my 2nd media HD. I did a complete wipe on both hardrives, and reinstalled everything from scratch. Loaded 10.3.5 G5 system discs and then straight to my Leopard disc with all updates. Did a PMU reset just to be sure too.
Clock now works. Several restarts from loading apps, and no problems. Fully unplugged overnight and started fine today.
Hope someone finds something usefull in my notes.

Mouse not working after latest Microsoft updates for Vista

After installing the latest series of Windows updates for Microsoft Vista on my Boot Camp installation, the mouse quit working. I am using a mighty mouse, but any mouse plugged in resulted in an error message that it could not install the correct drivers. Re-installing the boot camp drivers did not work, but using system restore to roll back the updates did work. I was wondering if anyone knew which Microsoft update caused this to occur? If you need any further information, let me know.

To be honest, I'm not sure. I was trying to get Reset Points working (oh the timing) and it required me to install updates to reboot, so I simply did that. From what I was able to gather from people running WIN8 on non-apple machines it is often related to changes in intel xhci. Not sure how that relates to a Mac though.

After itunes software update on vista, itunes shuts down - any help?

After I update itunes, Windows says that it needs to shut down the application due to an unexpected error. Windows support says to repair itunes. I process the repair, then itunes shuts down "unexpectedly" again. Windows supports says to repair again. Same circle..... itunes never works. I am using Vista. Any thoughts?

I did this and it still gave me the microsoft error " itunes has stopped working. A problem caused the program to stop working correctly. Windos will close the program and notify you is a solution is available". same circle again.

Updating from Vista 32 bit to Win'7 64 bit.

Hi,
I Currently own a Windows Vista 32 bit OP,
I would like to update to Windows 7 64 bit.
Is that possible?
This question was solved.
View Solution.

Clean install: Yes
Upgrade: No
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Update on Vista Support?

Hello all,
Is there any update on a timeline (even a statement saying, "go away, not for a while yet") on the SOA Suite certification on Vista? I'm using VMWare for my development now, and would like to install it on the base OS - not for production, just development.
Regards,
John

Hey petanque1,
Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.

Firmware update on Vista-MuVo N

How can I update the firmware on a?<span class="Apple-style-span">-MuVo N200 in Vista?

Before you open PC Suite, right-click the icon and select Properties, now select the Compatibility TAB and in the Compatibility Mode 'Run tis program in compatibility mode for: Windows XP'
gerrymoth
http://nokiAAddict.com
Using E71, N97 & 5800 XM on O2 Simplicity

Need this update: KB2750841 - Vista/2008

I need this update for Windows Vista and/or Windows Server 2008;
Windows Vista/2008 have the same strange bug, that only show IPv4 internet connectivity
as Windows 7 without this update;
or in other words, this IPv6 readyness update fixes something in Windows 7,
that is also buggy in Wndows Vista and Windows Server 2008;
Please provide this Update for Windows Vista and/or Windows Server 2008, too;
Thanks
Mike

The message thats coming up when I attempt to install Mountain Lion, says that 'We could not complete your purchase. OS X Mountain Lion is not compatible with this computer.'
Hardware Overview
Model Name:          MacBook
Model Identifier:          MacBook4,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.4 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          3 MB
Memory:          2 GB
Bus Speed:          800 MHz
Boot ROM Version:          MB41.00C1.B00
SMC Version (system):          1.31f1
Serial Number (system):          W883384K0P2
Hardware UUID:          4D6F9C00-6DB0-5B49-9EDD-D367374B55BC
Sudden Motion Sensor:
State:          Enabled
System Software Overview:
System Version:          Mac OS X 10.6.8 (10K549)
Kernel Version:          Darwin 10.8.0
Boot Volume:          Macintosh HD
Boot Mode:          Normal
Computer Name:          Frank
User Name:          Meredith Jones (meredithjones)
Secure Virtual Memory:          Enabled
64-bit Kernel and Extensions:          No
Time since boot:          7 minutes

2.1 update on vista 32

Similar Messages

Maybe you are looking for