2*17" Studio Displays and Mac Pro -

Hi,
I have two 17" Studio Displays and want to buy a Mac Pro. can anyone fill me in on what connectivity issues there are with this setup.
(I am sure this question has been answered - if so please post a link to the thread - I don't know enough to be able to sort through the answers when I searched)
Thanks very much
Aaron

If they are 17" LCDs with the ADC (Apple Display Connector)
<http://upload.wikimedia.org/wikipedia/commons/0/09/AppleDisplayConnector.jpg>
then each will need a DVI to ADC adapter
<http://store.apple.com/us/product/M8661LL/B?fnode=MTY1NDA5OQ&mco=MTgyNDg>
If they are 17" CRT with VGA connectors
<http://www.jestineyong.com/wp-content/uploads/2008/09/vga.jpg>
they will need DVI to VGA adapters.
<http://store.apple.com/us/product/M8754G/A?fnode=MTY1NDA5OQ&mco=MTI1NzQ>
One is included with the Mac Pro.
If they are 17" CRTs with the ADC, you cannot use them with a Mac Pro (or any computer without built-in ADC ports).

Similar Messages

Two Apple Displays and Mac Pro - How To Set Up?

Hello! My boyfriend surprised me yesterday with a second 23" Apple HD Display! Fed Ex delivered it and I had no idea it was coming! Before I take the plunge I need to know how to set it up so it works as with my current Mac Pro and 23" display so that they work together, as one big screen. I have the ATi X1900 graphics card with 512mg of RAM and two DVI ports and assume that will be sufficient to run both displays.
Is it possible to use them as one large screen? If so, how do I set that up? If I just plug it in and restart, will the two screens work as one or as separate screens?
Thanks!
Lisa

I did the same thing last night, and if you haven't just plugged it in already, it's really as simple as that.
I get a little video glitch on my main startup screen when I'm booting up, but otherwise it just works smoothly. Plug it in, and go.

MyBook Studio Edition and Mac pro

So i got my Mac Pro today and have my MyBook Studio Edition 500GB hard drive with about 90GB of stuff I need to transfer over. Doesn't seem to be anything wrong with the MyBook, but when I attach it to the Mac Pro, it won't mount. The ports recognize that there's something there, but not the drive. Am I out of luck? I had only intended on keeping this drive long enough to dump my files, but now I can't even do that. I tried it in the firewire, firewire 800 and USB ports. Someone mentioned updating the firmware, but how can I do that if the drive isn't being recognized?
I also can't seem to force power down the MyBook. If I hold the power button in, it just stays on.
Any suggestions?

You can of course read what the button does from Apple.
http://docs.info.apple.com/article.html?artnum=304123
http://www.apple.com/support/macpro/
http://developer.apple.com/documentation/HardwareDrivers/Conceptual/MacPro_0608/Articles/M43_0906arch.html
Others have said that the button manager doesn't work with Leopard.
And if you just got the Mac Pro, you should have 10.5.1 and the original system (hopefully cloned before doing anything) and only done fresh install where needed with latest Leopard compatible programs.
WD firmware: read and see if this applies -
http://support.wdc.com/download/index.asp?cxml=n&pid=21&swid=65
A Mac Pro needs to have the boot drive as GUID. If you are using or have the original boot drive it would have to be GUID. If you happened to merge your system from the G5 onto the Mac Pro's system, you could have problems.
Some G5s are happy with GUID, but native format is of course APL.
Formatting http://docs.info.apple.com/article.html?artnum=306932

Final Cut Studio 7 and Mac Pro RAID recommendations

I have a Mac Pro (early 2008) with 4 x 750gb SATA drives and 1 Promise DS4600 eSATA, decked out with 4 x 1TB 7200 RPM drives.
I am considering the following setup for the disks. I am trying to make sure there is enough redundancy in the setup to survive a hard drive failure and enough performance to satisfy edit and uncompressed HD capture needs over a BlackMagic Intensity card (120mb/s required):
1 x 750gb RAID1 System Drive - Macintosh HD (internal drives 1 & 2), block size 32kb
1 x 750gb RAID1 for FCP Scratch - ScratchDisk (internal drives 3 & 4), block size 128kb
1 x 2tb RAID10 for FCP capture - FCP Capture (Promise DS4600), block size 128kb over eSATA
…purchase something for Time Machine backup or use CCC (external firewire800)
Anything I've missed or anything I should or should not do? Thanks for the input.

I know of audio folks that use mirror for live recording and editing, yes, but there they need multiple drives and to spread out their tracks and libraries and plug-ins, not HD video.
There are excellent RAID6 card setups that make sense. And stick with quality drives.
Audio high-end anyway use to mean SCSI and FibreChannel.
So yes, move project files to RAID6 would be a good move. And do 'torture' the drives to death - BEFORE they are used - for like a week at least, to work and break them in and iron out any bugs.
Use Enterprise RAID Enabled drives, stay off bleeding edge and use safe trusted and reliable equipment (drives, controller, software). One of the real "killers" is if you need new hardware, are forced into an OS that hasn't had a year of testing and your applications usually take 6-12 months (or more) to really be certified.
There aren't a lot of RAID6 controllers, but there are some, and some SAS/SATA.

Dual 24" Displays and Mac Pro

Is there a extension cable available for the 24" Cinema display?
The 3 foot video cable is far too short for an efficient side by side monitor with a MacPro setup.

Lots of them out thee, such as
http://www.monoprice.com/products/product.asp?cid=102&cp_id=10246&cs_id=1024602&pid=5502&seq=1&format=2
You will also need a USB extension.

How can Install Final Cut Studio in my Mac Pro Early 2009 ??

I have Final Cut Studio 7 NOT installed yet and Mac Pro Early 2009 with OSX 10.9.5. I have Final Cut Pro X Version 10.1.4 installed. Can I installed Final Cut Studio here together with FCPX ?? Maybe not. What is the best way to install FCP Studio??
Do I need to make a partition? How? If so, what is the best OSX Version for FCP Studio ?? 10.6, 10.7, 10.8, 10.9 ??
Thanks for any help I can get
Alberto Marban

Here is the Best Practice Guidelines from Apple:
Final Cut Pro X, Motion 5, Compressor 4: Installation best practices - Apple Support
MtD

Dual Studio displays and midi timepiece setup

I have a G5 dual 2.7 GHz - with a 22" studio display and am trying to setup a 17"studio display as a second monitor. I bought a DVI to ADC Adapter for the 17". But when i went to plug the USB cable in, found out that I don't have enough usb ports. There are 2 on the back and one is being used by my 22" display and the other by a midi timepiece. This is a pretty elementary question but could i just buy a USB Hub that would give me additional USB outlets? Any other suggestions?

Hi
The original AGP Graphics/Sawtooth G4 doesn't support graphics cards with an ADC connector, as the logic board lacks the extra power 'slot' just above the standard AGP slot, which provides power to the ADC connector and display. I expect that's why the stock graphics card you currently have doesn't have an ADC connector to begin with.
Similarly you can't really convert a VGA port, which is analogue, into digital DVI or ADC, which is needed for the Apple Studio displays. Adapters do exist, but they can cost $400 as they have to convert an analogue video signal to digital. You'd also lose some quality due to the analogue to digital conversion.
The options are:
Buy a replacement AGP graphics card with two DVI connectors, along with two DVI to ADC adapters. I don't think a Mac compatible card with two DVI ports (that would work in your G4 with x2 AGP) exists though.
Buy a second Mac compatible (PCI) graphics card with a DVI connector, along with two DVI to ADC adapters. The Radeon 7000 (now discontinued) or Radeon 9200 (still available) would be possible options. More info can be found here:
http://ati.de/products/radeon7000/radeon7000me/index.html
http://ati.de/products/radeon9200/radeon9200me/specs.html
Unfortunately neither option is cheap though, as in both cases you need two DVI to ADC adapters.

HT201380 keep having scrolling problems with Maverick on both iMac and Mac Pro despite downloading mail software update

Have scrolling problems with Maverick despite downloading mail update on both IMAC and Mac Pro
Have to reboot and it helps for awhile then stalls again

The Mac OS X 10.4.7 Update introduced connection issues as a result of (according to the documentation) "Mail now supports connecting to mail servers through a SOCKS proxy". This probably has nothing to do with your problem, but it'd be worth going to System Preferences > Network and making sure the SOCKS Proxy is not enabled in the network configuration used to connect to the Internet.
Also, it looks like the crashes you're talking about are actually freezes, i.e. Mail becomes unresponsive rather than quitting unexpectedly. In Mail, open Window > Activity Viewer, and see whether Mail displays there what it's doing when it freezes. Actually, you may be able to avoid having to force quit Mail by canceling whatever it's doing (by clicking on the red stop icon of the activity).
Reinstalling Mail will probably accomplish nothing, but it might be worth reinstalling the Combo Update for the type of machine and the version of Mac OS X you're using (which you would have to do anyway if you wanted to reinstall Mail):
Mac OS X 10.4.7 Combo Update for Intel
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk before installing the update, and no applications should be running while installing it.

New cinema display on Mac Pro monitor keeps turning off/going dark. Support told me a keyboard shortcut (something like option R L)... I'd appreciate it if anyone knows it. I had this problem when i 1st bought it 2 months ago.

My new cinema display fro mac pro just went dark. When I 1st bought it, the display wouldn't turn on.I called support and they gave me a keyboard shortcut - something like Option+R+L - that you held down for 2 restart cycles. Then it magically turned on. I can't remember the sequence and I'm afraid to guess! I'd appreciate if anyone knows the trick. I'm also wondering if I should bring this display back...

Cassandra from Apple Support ROCKS!!!! She's a supervisor somewhere and should have a raise. Pleasant, smart and professional with a customer who wouldn't take "I don't know" for an answer.
If your cinema display goes dark:
1. shut down computer
2. restart
3. immediately hold down Command-Option-P-R keys simultaneously for a few minutes (seems forever)
4. keep holding keys for 2 startup cycles
5. release and go back to work if you're lucky to have a restored screen

Can't Get MacBook Pro and Mac Pro to Network

I have a MacBook Pro (2008 - 2.5 Ghz. Core 2 Duo with 4 Gb of RAM running OS X 10.6.7) that I have been connecting to my Mac Pro (2005 - 2 2.66 Ghz Xeon with 20 Gb of RAM running OS X 10.6.7) through an Ethernet switch on my school's network. This has worked without a hitch for years, but when I upgraded to 10.6.7 recently, the MacBook and Mac Pro fail to network. On the MacBook Pro, the Mac Pro's icon doesn't show in the shared area, and on the Mac Pro, I can see the icon for the MacBook Pro, but when I click on the icon to connect, I get the message that "Connection Failed There was an error connecting to the server (name of my MacBook Pro). Check the server name or IP address, and then try again." I have tried a direct connect using the "Connect to Server" under the Go menu on both machines, using their IP addresses, but no luck. Is there something I need to re-set to get these two to talk again? I have other Macs on the same network that my MacBook and my Mac Pro can see, and both machines can connect to them. They just can't connect to each other.
Thanks in advance for any ideas you might have on how to fix this.

I fixed the problem by re-setting the default values for my VirusBarrier X6 anti-virus program.

How to connect a 23" Cinema display and mac mini to an AV Receiver?

I am trying to get my 23" Cinema display and Mac Mini to a Yamaha RX-2700 AV Receiver. I am on first name terms with the guy in Maplins because I tried to get an Xbox 360 working with this display before and gave up in the end. The AV receiver has upscaling capability so I thought I'd try again. I tried connecting a HDMI - DVI adapter to the HDMI Out on the receiver and a HMDI to DVI cable from the Mac Mini to the HDMI in with a optical cable for the sound. The sound works fine but I get no display - the LED on the monitor flashes three times with a blank screen so it can't read the signal. Another option suggested was to use a VGA Converter connected to a VGA - HDMI cable but I would like to find out if that would work before going down that route?
I am looking for some advice about whether this type of configuation is possible with the 23" ACD and if so what do I need to buy to make it work? I love the quality of my ACD to avoid having to replace it with a TV to get my multi media life in order.
Many thanks

The fifth and sixth item on this page are DisplayPort male to Mini DisplayPort female "Extension cables". Under US$6 plus shipping from a reputable seller:
http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10246#1024602

Can i use Apple 2005 20-inche cinema display on Mac pro ?

can i use Apple 2005 20-inche cinema display on Mac pro ?

If the display has a DVI connector it will plug into the Mac Pro directly. If it uses ADC (Apple Display Connector)
<http://upload.wikimedia.org/wikipedia/commons/0/09/AppleDisplayConnector.jpg>
you will need a DVI to ADC adapter
<http://www.amazon.com/Apple-M8661LL-Display-Adapter-4038234011420/dp/B00011KHT2>

Sound Switches Between Thunderbolt Display and MacBook Pro

I have an Apple Thunderbolt display and MacBook Pro set-up with dual screens. I have an iPhone plugged into a dock that runs to the display. When I have music playing out of the display and I disconnect my iPhone, it switches the sound to the MacBook Pro.
1. How do I stop this from happening?
2. If I can't stop it from happening, how do I move the sound from the MacBook Pro back to the display?
There doesn't seem to be any options within Preferences/Sound to change it back.
Thank you.

I've a Spyder4Elite that I use on both my Thunderbolt Display and on my MBP - and, while both are calibrated, they don't - and cannot - 'match' one another, no matter how hard I try.
I suspect that you're running up against the same wall? Different technologies in different displays. I doubt that you'll ever get a perfect match: mine are just 'good enough'.
Clinton

Is it OK to use USB 2.0 connection for Glyph external drive and Mac Pro as project drive?

Is it OK to use a USB 2.0 connection for Glyph external drive and Mac Pro as project drive? I was told by Sweetwater tech support to use Firewire, but both the FW400 and FW800 connections crash my audio interface software mixer (Presonus' "Universal Control" software).
Both Firewire connections also create a 10 second hang for each Command-Save that I do.
USB 2.0 for the external drive seems to be working so far, but is there some reason I should be wary of using this as my go-to project drive? In other words, I am imagining that there was probably some definite reason that the tech support guy mentioned not to use it. But maybe not. It's a brand new Glyph. In any event, it's nice to have the 10 second hang eliminated, and I was just looking for some advice, since digging into the Presonus software issue could take some time.

If you have a mac pro, why not stick the external HDD inside via one of your many SATA cables & have it run 9 times faster than your USB?
Or stick a HDD CADDY in your mac pro, so you can slot in a full sized 3TB HDD for recording, and when you are done, pull it out & slip it in an external enclosure if you need to take it places?

I have Iphone 5 and mac pro, and i want to transfer pics through idrop. but my iphone not detect the mac pro. How i can turn the idrop on my computer?

I have Iphone 5 and mac pro, and i want to transfer pics through idrop. but my iphone not detect the mac pro. How i can turn the idrop on my computer?

The Mac Pro - the desktop computer - does not support Airdrop, if that's what you mean.
Matt

2*17" Studio Displays and Mac Pro -

Similar Messages

Maybe you are looking for