2.2.1 update and now error message every few seconds

Did the update this morning. All went fine. I have never used airplane mode. So phone was not in it.
Now all I get every few seconds on the phone, even while in sleep mode, and it wakes the screen is message:
This accessory is not made to work with iphone. Would I like to turn on Airplane mode to eliminate audio interference etc… Yes/No
If I do nothing the message goes away and the iphone goes back to sleep.
I tried selecting yes. It put phone into airplane mode. But message stills comes up. Same thing when I selected No.
This error comes up every 30 seconds or so. I have tried hard restarting the iPhone hold down Home and top button until iPhone shuts down. This didn't do anything.
Anyone else having this problem?

This is very weird. You can always restore the phone again in iTunes. If you have proper backups (pics, contacts, music, apps), after restoring, set it up as a new phone so there is no potentially corrupted backup getting on there. See if that works. If not, take it to the Apple Store and have them look at it.

Similar Messages

I had itunes on my Dell laptop, i downloaded an apple update and now error message 126

I had itunes on my Dell laptop, i downloaded an apple update and now I get error message widows 126 and error message MSVCR80.dll. Help please.

Hi Gabriel,
Thanks for visiting Apple Support Communities.
If you are receiving errors in Windows after updating iTunes, I recommend completely removing and reinstalling the software using the instructions in this article:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
When reinstalling iTunes (step 3 in the article above), be sure that you are logged in to your computer as an Administrator:
Make sure you have an administrator account.
To install iTunes or QuickTime, you need to log in as an administrator on the computer. If you're not sure you have an administrator account, you may find this Microsoft article helpful: Windows 7: How do I log on as an administrator?You can refer to the Help documentation from Microsoft, contact your IT department, or visit support.microsoft.com for more information.
From:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Best Regards,
Jeremy

Latest iTunes update problems with repeated error messages every 65 seconds??

After this mornings' update of iTunes. Problems with Applemobiledeviceservices.exe. Error message every 65 seconds - software exception (oxc06d007e) occurred in the application at location 0x7c812fd3.
How do I stop this?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Tried to install itunes update software and now error message coming up

I tried to install the itunes update today and now its not working. error message 7 keeps coming up- I have tried to trouble shoot but still not working. uninstalled itunes and reinstalled, still not working. HELP

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Update and restore error messages on iPod touch 2nd Gen

Hi folks I'm searching for a solution for the error message I have received when i connected my Ipod touch to my PC. I got notification that there was an update for Itunes available and would i like to download, i chose not to at this time as all i wanted to do was quickly put some music onto the ipod touch. I also had a notification that there was new software updates for the ipod itself, being how have had some of the issues this update was supposed to fix I clicked to download update and install.
since then i have had an error message telling me i now had to Restore my ipod, As it is in recovery mode due to an error occuring during software update. I didnt want to do this as i have not synced the Ipod to the PC in quite some time and had purchased content via itunes and appstore on the ipod itself and was affraid i'd lose all this.
I realised i had to restore to sort the issue out and have been trying in vain to restore the ipod for 2 days now. Every 'fix' or 'solution' on the help page has failed so far. the error message help page is here:
http://support.apple.com/kb/TS1275
i have done everything on that list and still the issue wont go away, the number in brackets relating to the error message i receive is (14) every time.
I have a log of the last attempt to restore and failing which i copied before sending the information off to Apple. If anyone can help i'll be eternally grateful.
my ipod is a 16gig 2nd gen touch and obviously since its somehow in recovery mode i cant use it at all, and all i have on the screen is the usb cable and the itunes icon.

ok update:
I was looking at other threads that had similar issues as I'm having, I decided to dig in the PC a bit, i went to My computer/C drive/Documents and settings/<user name>/Application Data/Apple Computer/iTunes/iPod Software updates
to get the Application Data folder to become visible goto the Tools heading and select Folder Options, goto the View tab, then click the radio button that has "Show hidden files and folders" next to it, click apply, click ok. The application Data folder now appears in the directory.
I then Deleted everything inside the iPod Software updates folder.
Turned off my Anti virus and went to http://www.felixbruns.de/iPod/firmware/
I selected my iPod and downloaded the update to my pc. Opened iTunes and shift clicked restore, i found the recently downloaded update on my desktop and installed it. Now my iPod has finally restored! success! yes!!
so now that we have got the iPod working again i need to know, since it is totally blank now what can i do about retrieving the songs, movies, apps and games i have paid for via the ipod touch itself? I have spent a lot of money on these and would like them back. Any ideas folks?
I can see my purchase history when im in iTunes i goto the Store tab and select my account. its all listed there but no option to re-download the content.
Thanks for any help on the matter

HT1338 click on updates and now have message close safaribto continue I do that but it remains frozen on screen and updates do not finish?

i was asked to do updates and i clicked now i then went on safari message appeared and said close safari to continue updates idi installation allert remains on screen and updates appear stalled ?

Is there a continue button?
If there is not, try quitting the installer and then try updating again.

Installed new version and now error message...HELP!!!

I installed the new version of itunes and every time I try and open itunes as its accessing the itunes store, I get an error message telling me
" I tunes has encountered a problem and needs to close". I can not open itunes at all anymore ever since the update...please someone help!!!

Im getting ModName: webkit.dll
and ModVer: 5.33.18.1
Taken at face value, you've got trouble with an Apple Application Support program file. (iTunes requires a properly functioning Apple Application Support in order to work correctly.) So for that one you'll need to uninstall both iTunes and Apple Application Support and then reinstall iTunes (which normally would reinstall AAS).
I also like to take a few other explicit precautions along the way (just in case). See the following post for instructions:
http://discussions.apple.com/thread.jspa?messageID=11901253&#11901253
(Although those instructions are for a 32-bit Vista, they're pretty much identical for XP. Just read "Uninstall a program control panel" as "Add or Remove Programs control panel" and "Computer" as "My Computer".)

Signature updates and CSM error message

Hi,
I have started getting the following error message in CSM when pushing signature updates to our 4200 series and IDSM-II blades:
Could not get device version after pushing down sensor update package to device
The actual signature updates work fine, but just wondering if I can get rid of this error message. Any ideas?
Many thanks

Hi Dustin,
Here is the deployment log for one of the devices:
Device version before update is: 7.0(2)E4S581.0
Going to send the following package(s) to sensor: IPS-CS-MGR-sig-S583-req-E4.zip,
Processing package file: IPS-CS-MGR-sig-S583-req-E4.zip
Package is ready for update
Checking analysis engine status from device XXXXXX
Analysis engine is up running and device is ready to take updates
Pushing package: IPS-sig-S583-req-E4.pkg to device
Device did not respond to pushUpgrade command from CSM. It may have been upgraded. Will query to find out
Device not ready, retry getVersion in 30000 milliseconds. (1/16)
Device not ready, retry getVersion in 30000 milliseconds. (2/16)
Device not ready, retry getVersion in 30000 milliseconds. (3/16)
Device not ready, retry getVersion in 30000 milliseconds. (4/16)
Device not ready, retry getVersion in 30000 milliseconds. (5/16)
Error when trying to update: Could not get device version after pushing down sensor update package to device: XXXXXX. Please access the device using Command Line Interface, and check if it is working properly
Device version before update is: 7.0(2)E4S581.0
Going to send the following package(s) to sensor: IPS-CS-MGR-sig-S583-req-E4.zip,
Processing package file: IPS-CS-MGR-sig-S583-req-E4.zip
Package is ready for update
Checking analysis engine status from device XXXXXX
Analysis engine is up running and device is ready to take updates
Pushing package: IPS-sig-S583-req-E4.pkg to device
Device did not respond to pushUpgrade command from CSM. It may have been upgraded. Will query to find out
Device not ready, retry getVersion in 30000 milliseconds. (1/16)
Device not ready, retry getVersion in 30000 milliseconds. (2/16)
Device not ready, retry getVersion in 30000 milliseconds. (3/16)
Device not ready, retry getVersion in 30000 milliseconds. (4/16)
Device not ready, retry getVersion in 30000 milliseconds. (5/16)
Error when trying to update: Could not get device version after pushing down sensor update package to device: XXXXXX. Please access the device using Command Line Interface, and check if it is working properly

ITunes 11.4 update and system error message?

I recently updated my MacBookPro iTunes to 11.4. As soon as it was "completed" I got the following error.
System Extension Cannot Be Used
"/system/library/extensions/AppleUSBEthernetHost.kext" was installed improperly.
What does this mean? Is it a problem? How can I fix it?
I also updated my Epson printer software at same time, but I'm thinking the error message is not related to the printer.
Message was edited by: Kawahine

Browse the forum history. There's been dozens of topics about this over the past week.

After most recent update firefox crashes - error message every time I try to open - open fails

Updated Firefox this morning and now I can't use it at all. It crashes and fails to open every time I try. I get an error box on my screen. Still fails to open in safe mode. Tried uninstalling and reinstalling, still same errors.

That is a problem with Roboform.
You can try to update to Roboform 7.6.2
*[https://bugzilla.mozilla.org/show_bug.cgi?id=691271 bug 691271] RESOLVED WORKSFORME Crash mainly close to startup in [@ DebugBreak ] [@ DbgBreakPoint ] with Roboform

Amavis is logging error messages every 10 seconds

Hello,
I noticed today that amavisd started to report error messages to the console log every 10 seconds as follows:
4/13/10 9:25:26 AM org.amavis.amavisd[617] Can't send SIG 0 to process [62]: Operation not permitted at /usr/bin/amavisd line 11203.
4/13/10 9:25:26 AM com.apple.launchd[1] (org.amavis.amavisd[617]) Exited with exit code: 1
4/13/10 9:25:26 AM com.apple.launchd[1] (org.amavis.amavisd[617]) Exited with exit code: 1
4/13/10 9:25:26 AM com.apple.launchd[1] (org.amavis.amavisd) Throttling respawn: Will start in 10 seconds
This block of messages repeats itself every 10 seconds.
This began after I restarted the server after it apparantly crashed last night. Otherwise, there were no changes to the system.
Running Leopard Server 10.5.8 on an intel mac mini.
I am wondering how to stop this?

Found the following blog post at Geek Foibles which solved the problem:
+AMAVISD NOT STARTING AFTER RESTARTING MAC OS X SERVER+
+February 6, 2009, 4:31 am+
+Filed under: Uncategorized | Tags: amavisd, bug, mac os x server, mail, spam filtering+
+I had a recent spot of trouble with Mac OS X Server for a client who has mail services running. Due to a hardware issue I had to force off the server, but when I started it back up I noticed that while Postfix would accept mail from senders, it wouldn’t actually deliver it to the destination mailbox. Instead, I’d get this message in mail.log:+
+postfix/error[7063]: 56118A83885: to=<[email protected]>, relay=none, delay=4776, delays=4776/0/0/0, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to 127.0.0.1[127.0.0.1]: Connection refused)+
+The complaint that it wasn’t delivering mail due to an inability to connect to the local host suggested some sort of mail filter not running, of which there are two on Mac OS X Server: clamav (used for virus scanning) and amavisd (used for spam filtering). In my case it was easy to narrow it down, since clamav wasn’t enabled. I checked amavis.log and found that it hadn’t been updated since I’d restarted, so it seemed clear it wasn’t launching. By looking in system.log I could see launchd was trying to start it repeatedly since it was enabled in Server Admin, but it kept failing:+
+Feb 5 23:59:36 hq org.amavis.amavisd[5404]: Can't send SIG 0 to process [68]: Operation not permitted at /usr/bin/amavisd line 11203.+
+Feb 5 23:59:36 hq com.apple.launchd[1] (org.amavis.amavisd[5404]): Exited with exit code: 1+
+Feb 5 23:59:36 hq com.apple.launchd[1] (org.amavis.amavisd): Throttling respawn: Will start in 10 seconds+
+It was trying to kill process 68, which in my case was kadmind. This didn’t make sense since kadmind deals with Kerberos, something spam filtering has nothing to do with. Fortunately amavisd is a Perl script and it was giving me the line number, so I was able to open it and hunt down the offending code. I found that when amavisd starts, it looks to see if there’s already a PID file (located at /var/amavis/amavisd.pid), gets the PID out of that file and then tries to kill said PID. So, if another copy of amavisd is already running when you start it, it kills the old one so that they don’t conflict. Problem is, in my case the PID file was stale: it hadn’t been cleaned up after amavisd’s last run since I’d had to force off the system, and now the PID was in use by another, unrelated process that it doesn’t have permission to kill.+
+amavisd does check to see if the PID file was created before the last system startup, which would allow it to ignore stale PID files, but it only does this after trying to kill the old process. This bug was fixed in December in version 2.6.2 of amavis, but unfortunately for Mac OS X Server users, Apple uses version 2.5.1 from May of 2007.+
+Removing the stale PID file resolved the issue. Its removal allowed launchd’s next automatic attempt to start amavisd to succeed, then a few minutes later Postfix’s mail queue manager started being able to deliver all the mail queued during the downtime to the appropriate mailboxes.+

HT1926 Version 11.1.4.62 on WinXP issue: AppleMobileDeviceHelper.exe error message every 30 seconds. iTunes hangs when iPhone4 is syncronized

Version 11.1.4.62 on WinXP issue: I have re-installed iTunes according to instructions. iTunes give me the error message "AppleMobileDeviceHelper.exe has found an error and terminates. Restarting service does not help. Re-installing does not help. iTunes cannot update iPhone4S, iTunes hangs when trying after iPhone syncronization.

See the user tip: https://discussions.apple.com/docs/DOC-6562 for resolution

Received an iTunes update and then error message "iTunes was not installed correctly. Please reinstall iTunes. error 7 (Windows error 126) I also received and error message that MSVCR80.dll was not found. I read online to unintall all Apple programs and

Was not enough room to finish. I tried to uninstall all Apple programs and reinstall but I was asked to validate an unidentified publisher and don't have a clue what that is and could not remove programs. I am not good at fixing stuff on the computer and would like some help with this. I have had iTunes for a long time without issue.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Acrobat Standard updated and now automatically starts every time computer reboots.

Adobe insisted that I update my program yesterday, so I did. But now each time I reboot my computer, Acrobat starts automatically and freezes the entire PC up. I have tried to contact Adobe support but they won't help with anything on Acrobat 7. Can someone please help me get this to stop starting by itself?

Sounds like you added Acrobat to your Startup by accident. Remove it from the list and you should be good.

Video recording, playback and music playback stop every few seconds after 5.0.1 upgrade

Hi,
Ever since I upgraded my iPhone4 to 5.0.1 it randomly stops during recording of video or playing back of video or music!
This is very annoying, anyone experiencing the same?

See if this Link offers any assistance
iPad Unable to Update or Restore
http://support.apple.com/kb/ht4097

2.2.1 update and now error message every few seconds

Similar Messages

Maybe you are looking for