2.2 Ghz MacBook Pro or 2.4 Ghz?

I'm thinking about buying a MacBook Pro that has a 2.2 Ghz intel core duo but is there a substantial difference in the performance of 2.2 Ghz and the present 2.4 Ghz model? Also do only the new MacBook Pros have the iPhone touch gestures or can the older ones be updated?

Depends on what you're doing with the computer. If you're using it for programmes that requires a lot of processing power then the 2.4 Ghz is better. Something like using Final Cut or Motion... Photoshop like programmes doesn't require that high of a hertz in processing instead more RAM will do much better. Also only the newest MacBook Pro have the multi-touch feature as it requires additional hardware.

Similar Messages

  • MacBook Pro 17" 2.16 Ghz - Ongoing Shut Down / Freezing Problems

    After searching around the web for quite awhile and reading through as much as I can on here, I've finally run out of options and so thought I would post my experience / problem on here and see if anyone knows how to fix my problem.
    My gear:
    OS 10.6.7
    MacBook Pro 17" 2.16 Ghz
    Model Name:          MacBook Pro
      Model Identifier:          MacBookPro1,2
      Processor Name:          Intel Core Duo
      Processor Speed:          2.16 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          2 MB
      Memory:          2 GB
      Bus Speed:          667 MHz
      Boot ROM Version:          MBP12.0061.B03
      SMC Version (system):          1.5f10
    Video:
    Chipset Model:          ATY,RadeonX1600
    RAM - 2 x 1Gb Chips
    FUJITSU MHY2120BH:
      Capacity:          120.03 GB (120,034,123,776 bytes)
      Model:          FUJITSU MHY2120BH                     
      Revision:          0081000D
      Serial Number:                  K439*****H4A
      Native Command Queuing:          Yes
      Queue Depth:          32
      Removable Media:          No
      Detachable Drive:          No
      BSD Name:          disk0
      Medium Type:          Rotational
      Partition Map Type:          GPT (GUID Partition Table)
      S.M.A.R.T. status:          Verified
      Volumes:
      Capacity:          209.7 MB (209,715,200 bytes)
      Writable:          Yes
      BSD Name:          disk0s1
    Hard Disk:
      Capacity:          119.69 GB (119,690,149,888 bytes)
      Available:          98.97 GB (98,967,773,184 bytes)
      Writable:          Yes
      File System:          Journaled HFS+
      BSD Name:          disk0s2
      Mount Point:          /
    Problem:
    Over the last few months I've had constant problems with freezing, shut downs. This might be in the form of I'll be working in iMovie editing some video and then mouse down into the corner to switch Spaces, the screen will half zoom out then just hang. Mouse won't respond, everything just sits there. I usually have to fix this by holding down the power button until the MBP turns off, then just reboot.
    Other times I'll leave the computer on at night, wake up in the morning and it will either be off and as such, I just have to press the power button and it boots up again. Or the screen will be off, metal above the Function keys will be cooking, but the computer isn't responding, just a blank screen. I hold down the power button until it turns off and then reboot again.
    These problems were getting worse. It has gotten to the stage where it might freeze a couple of times a day.
    Seems the problem only occurs when the MBP is working. I might leave it rendering at night and wake in the morning to find it off etc.
    Will also sometimes get horizontial lines in apps. I shut them down and start them up again and it's fine. But it's like the graphics card is struggling big time.
    Actions to Fix:
    - Started with repairing the permissions, but I always found that it had lots of items to repair, would repair then, but then if I verified again, the same things would come up as needing to be repaired. I also tried booting from the OS X DVD and repairing from that version of Disk Utility, but same result.
    - Created new admin user account, to see if problem was just limited to my account. Same problem.
    - Ran AHT from the MBP DVD that came with the MBP and it passed the hardware test. Though I couldn't find anywhere to make it run an extended test. The test I could run would only take about 10 minutes I believe.
    - Erased the HD and fresh install of 10.6.3 from DVD, then software updates  to 10.6.7 (yesterday). Repaired permissions after each step. After the OS upgrade I got a decent list of items that needed to be repaired, and after repair, would still show as needing repair. I checked the KB and it listed a lot of files that might get this error, but that it was ok to ignore them.
    - Was editing video this morning in iMovie again, running Disk Utility on an external drive and boom, the MBP locked up again
    I've gone through the /logs/crashlog in both the root and home user folders. After nearly all crashes these are empty, so it's not even reporting it anywhere.
    Can anyone shed any light on whhat might be causing the problem?
    <Serial Number Edited by Host>

    Actually, when I was at the Apple Store I had both laptops flat, with the screens at 90 degrees. Pushing the screen forward and back with my fingers (via the top of the screen of course), the 15" easily has twice the hinge resistance. With that kind of test, weight isn't a significant factor -- that 17" hinge on a 15" laptop would probably cause the screen to come crashing down, too.
    There were a few people in these forums who said their 17" was actually too tight (wish I had that problem!). It seems like a quality/consistency problem that could easily be fixed by A) measuring the force required to move the screen back and forth before screwing the case together, and B) making the hinge tension adjustable.

  • Which Intel CPU is used for MacBook Pro 13" 2.26 GHz

    Hello,
    I want to buy the above-mentioned MacBook Pro, however, I don't know which CPU model is used (P7550 or P8400), since I need the CPU feature "IVT" (Intel® Virtualization Technology) which is only available in P8400.
    In some German discussions I got the information that both CPU models have been sold in Germany (checked with the tool CPU-X)
    The MacBook Pro with 2.53 GHz (P8700) has also the IVT feature.
    Does anybody know which CPU model is currently used in the MacBook 13" (MMB990*/A)?
    Thanks for your feedback.
    Michael

    Hello Rod,
    Today I was in the apple store in munich and checked some mbp 13" 2,26 GHz systems. All had the 8400 inside. I shortly spoke with a saleman, however, he didn't know about different models inside the systems and told me, that I can't test the system locally, but I can check it @home and if i'm not happy with the system I could bring it back within 14 days.
    My result from the mbp:
    machdep.cpu.brand_string: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz
    machdep.cpu.features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT PSE36 CLFSH DS ACPI MMX FXSR SSE SSE2 SS HTT TM SSE3 MON DSCPL VMX SMX EST TM2 SSSE3 CX16 TPR PDCM SSE4.1
    I compared it with your results and the only difference I found was an additional feature "SMX" (Safer Mode Extensions). I couldn't find out for what exactly this is used, but I seems independ of the IVT.
    I believe that you are right, and the VMX corresponds to the "IVT" feature. If this is true, I could take any MBP 13"
    What do you mean?
    Thx
    Michael

  • I have a Mid 2009 15 inch MacBook Pro with  2.53 GHz Intel Core 2 Duo and 4 GB 1067 MHz DDR3. Can this MacBook be upgraded to 8GB? If so, what type would you recomended

    I have a Mid 2009 15 inch MacBook Pro with  2.53 GHz Intel Core 2 Duo and 4 GB 1067 MHz DDR3. Can this MacBook be upgraded to 8GB? If so, what type would you recomended

    Awesome! Thank you What about the Corsair brand?
    http://www.amazon.com/Corsair-DDR3-Laptop-Memory-CMSO8GX3M2A1333C9/dp/B002YUF8ZG /ref=cm_cr_pr_product_top

  • I recently updated? to Lion from 10.6.8(snow leopard), and things seem to be running slower.  Has anyone had similar problems?  I have Feb 2011 Macbook pro 13" 2.3 Ghz.

    I recently updated? to Lion from 10.6.8(snow leopard), and things seem to be running slower.  Has anyone had similar problems?  I have Feb 2011 Macbook pro 13" 2.3 Ghz.

    As Shootist pointed out, the system uses more power.
    However, initially it will reindex the hard drive for spotlight, which will slow things down temporarily.
    It also must rebuild caches that eventually will speed things up.
    If it has completed indexing the hard drive (no dot pulsing in the spyglass), then there might be something wrong.
    Start by booting into the Recovery HD (a partition created with Lion that has Disk Utility and reinstallation options) by holding down cmd-r when you restart. You can let go when the gray screen appears.
    When it boots, select Disk Utility and Repair the drive.
    If that doesn't speed things up, try re-installing the OS from the same Recovery HD. It won't delete any of your files, but it has helped some people whose Macs ran slow after installing Lion.
    Also, how much memory do you have? Lion needs RAM so maxing your Mac out might also help.

  • Ist mein MacBook Pro, 15", 2,53 GHz, Mitte 2009, mit der CS6 kompatibel? Welche Probleme gibt es dabei?

    Ist mein MacBook Pro, 15", 2,53 GHz, Mitte 2009, mit der CS6 kompatibel? Welche Probleme gibt es dabei?

    Du bist wahrscheinlich mit dem Problem, dass so viele von uns mit 2011 Maschinen werden mit - ein Defekt im Löten von der GPU, die erste wird allgemeine Ursache Bildschirm Probleme und schließlich zu einer unbrauchbar Maschine führen. Leider ist Apple die Anerkennung des Mangels und die einzige Angebot, das sie liefern den Nutzern ist eine Hauptplatine ausgetauscht werden - die bis $ 700 + USD aufrufen können.
    Einige Leute, die lange vorbei sind, werden mit Garantie neue GPU eingebaut. Dieser Prozess ist sehr viel billiger als eine neue Hauptplatine und scheint eine dauerhafte Lösung für den Mangel an.
    Um dieses Problem stoßen mehr lesen, siehe -> https://discussions.apple.com/thread/4766577?tstart=0.
    Viel Glück,
    Clinton
    PS: Dies wurde "übersetzt" vom Englischen ins Deutsche mit Google Translate - mich nicht für alles, was lächerlich klingen mag schuld!

  • HT1338 Does anyone know what the model # is of the current MacBook Pro 15in, 2.3 GHz , 4GB memory, 500 MG HD? Is it MD103LL/A? My MacBook Pro (3 yrs old) was stolen and my ins co found this model at Best Buy for $1799. Want to know if they're same, specs?

    Does anyone know what the model # is of the current MacBook Pro 15in, 2.3 GHz , 4GB memory, 500 MG HD? Is it MD103LL/A? My MacBook Pro (3 yrs old) was stolen and my ins co found this model at Best Buy for $1799. Want to know if they're same, specs? Thank you!

    Yes, it is in the United States and Canada. In other countries, the LL will be something else.
    (69778)

  • Hello, I have a Macbook Pro 17'' 2.4 GHz Intel Core i7 (2011). I dont know what happened but the pixels on black or dark areas on my monitor are displayed in a flickering red color, and on white areas are light blue. Any idea??

    Hello,
    I have a Macbook Pro 17'', 2.4 GHz Intel Core i7 (late 2011). I dont know what happened but the screen shows red flickering pixels everywhere where it should be black, and light blue pixels where it should be gray, I had this problem twice, the first time it just disappeared by itself. Now it's been like this for days, I have really no clue.
    Anyone with the same problem or solution?
    This is how it looks like:
    Thanx

    Is that a camera picture or a screen-shot? Is there any difference? i.e., can you capture the problems in a screen shot, or not?

  • Should I upgrade to Snow Leopard/ Lion using a MacBook Pro with 2.26 GHz Inetl Core 2 Duo Processor and 2GB Memory? Can my old macbook take it?

    Should I upgrade to Snow Leopard/ Lion using a MacBook Pro with 2.26 GHz Inetl Core 2 Duo Processor and 2GB Memory? Can my old macbook take it?
    thanks

    Yes. You should be fine with Snow Leopard, but Lion requires a minimum of 2 GBs of RAM. If you upgrade to Lion I would first upgrade your RAM to at least 4 GBs if your model supports it. Also, see:
    How to Install OS X Updates Successfully
    A. Repair the Hard Drive and Permissions:
    Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally. 
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    B. Make a Bootable Backup Using Restore Option of Disk Utility:
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    C. Important: Please read before installing:
    If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
    You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
    The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update.  While the installation is in progress do not use the computer.
    D. To upgrade:
    Purchase the Snow Leopard Retail DVD.
    Boot From The OS X Installer Disc:
    Insert OS X Installer Disc into the optical drive.
    Restart the computer.
    Immediately after the chime press and hold down the "C" key.
    Release the key when the spinning gear below the dark gray Apple logo appears.
    Wait for installer to finish loading.
    E. If updating:
    Download and install update(s) 
    Use Software Update, or
    Download standalone updater(s).

  • Change SSD on Macbook Pro 17" 2.5 GHz intel Core 2 Duo late 2008

    Now I'm using Macbook Pro 17" 2.5 GHz intel Core 2 Duo late 2008. I would like to know if it is possible to change my 250Gb HDD to a SSD? What is the max of Gb?

    Yes, it is possible. The capacity of the drive is limited by what the manufacturers of SSDs are producing and, of course, by the depth of your pockets. Expect to spend $600-900 USD for a 250GB or 256GB unit and $1000-$1600 for a 512GB SSD.
    Message was edited by: eww

  • HT1338 How do I update my macbook pro with 2.33 GHz Intel Core 2 Duo processors from OSX 10.5.8 to 10.7?

    How do I update my macbook pro with 2.33 GHz Intel Core 2 Duo processors from OSX 10.5.8 to 10.7?

    Firefox 16.0.2 was the last to work on the old Mac OSX 10.5.x as Firefox 17.0 to current has required OSX 10.6+
    https://www.mozilla.org/en-US/firefox/16.0/system-requirements/
    https://www.mozilla.org/en-US/firefox/17.0/system-requirements/

  • What is a recommended decompression software for a non-Lion compatible MacBook Pro 1,1 2 GHz Intel Core Duo running OS X Version 10.6.8?

    What is a recommended decompression software for a non-Lion compatible MacBook Pro 1,1 2 GHz Intel Core Duo running OS X Version 10.6.8?

    My thanks to you and all other respondents.  In backing up "theVault" App I thought that my ancient version of Stuffit was inadequate to unzip the backup file.  I attempted to download the latest Zipit version which only works with Lion.  After upgrading to Stuffit 9 I realized that theVault backup file was encrypted so as to not open on the backup Mac.  One must restore to the iPhone where is does open.
    My apologies for the imprecise post.  I am finding limitations with not being able to install Lion on my early MacBook Pro.  I can recommend theVault to those looking for a password App with secure backup.

  • MacBook Pro i5 2.4 Ghz versus MacBook Pro Core 2 Duo 3.06 Ghz???

    Re: MacBook Pro i5 2.4 Ghz vs. MacBook Pro Core 2 Duo 3.06 Ghz
    Hello,
    I am new to CS5 / Photoshop (& Apple!) and am looking forward to diving in. However I am about to purchase either a used MacBook Pro Core 2 Duo 3.06 Ghz or the MacBook Pro i5 2.4 Ghz. Can anyone provide me with information as performance differences I may see between the 2 processors using CS5 for photo/video editing? I appreciate any insight!
    The MacBook Pro Core 2 Duo 3.06 Ghz has been upgraded to 8GB of RAM, has the no glare screen, and a 750GB Hardrive. The new i5 I would buy is the lower end model. Less RAM and smaller HD, however they are obviously upgradeable in the future. It also would not have the no glare screen.
    My biggest question is around performance of the the CPUs on Photoshop, etc ...??? That being said, there is a $300 difference and is the new machine worth it in performance???
    Appreciate your help!

    georgecoll wrote:
    Re: MacBook Pro i5 2.4 Ghz vs. MacBook Pro Core 2 Duo 3.06 Ghz
    Hello,
    I am new to CS5 / Photoshop (& Apple!) and am looking forward to diving in. However I am about to purchase either a used MacBook Pro Core 2 Duo 3.06 Ghz or the MacBook Pro i5 2.4 Ghz. Can anyone provide me with information as performance differences I may see between the 2 processors using CS5 for photo/video editing? I appreciate any insight!
    The MacBook Pro Core 2 Duo 3.06 Ghz has been upgraded to 8GB of RAM, has the no glare screen, and a 750GB Hardrive. The new i5 I would buy is the lower end model. Less RAM and smaller HD, however they are obviously upgradeable in the future. It also would not have the no glare screen.
    My biggest question is around performance of the the CPUs on Photoshop, etc ...??? That being said, there is a $300 difference and is the new machine worth it in performance???
    Appreciate your help!
    If you're going to do serious Photoshopping, then more ram is better. But, without knowing the price differences, I'll be honest, go for the i5 version, it'll work better for you. It'll cost you about $120 to upgrade the RAM to 8GB (go to any reputable online dealer or Amazon). It'll cost you about $110 to upgrade to 1TB internal HDD. Both upgrade are user friendly and do not harm the warranty of the new MBP.
    So, for $230 in upgrades, you'll have similar specs as the used one, but a much faster performing processor. Unless the Core 2 Duo is MUCH cheaper, I'd buy new, then immediately upgrade. I have the i7 processor, I did the upgrades, and whenever I turn on the Core 2 Duo, it feels like I'm using an abacus. OK, not that bad, but the difference on video encoding and photoshop/Aperture is huge.

  • MacBook Pro i5 2.5 GHz/8GB RAM  With Retina

    Hi eveyone,
    As many of you already did, today I've upgraded my MacBook Pro i5 2.5 GHz/8GB RAM from Mountain Lion (10.8.5) to Mavericks (10.9).
    Unfortunately, I'm experiencing serious and unpleasant issues since I installed the upgrade.
    Specifically, my monitor flickers almost every time I scroll an application window (e.g., Safari, Chrom or internet, either using an USB mouse or the trackpad.
    Moreover, when I pass the mouse over the Dock, this starts vibrating from time to time.
    After several reboots and given that one of the new features of Mavericks is the new management of external monitors, I've tried to re-install from scratch the OS X upgradewithout connecting my laptop to the external LCD but still nothing has changed.
    I'm really annoyed by having both monitors flickering. Another particular thing is that if I try to click on the Finder menu appearing on the external monitor, this makes flicker the primary monitor approximately at the same coordinates (i.e., at the Finder menu of the laptop monitor).
    It seems like something is going wrong with the video card drivers but this is just my conjecture.
    Are you guys experiencing the same or is there anything you might want to suggest to solve these issues?
    Thank you in advance
    ANY HELP THERE ,IT IS REALLY DISAPONTEING THAT THIS IS HAPPENING WITH APPLE PRODUCTS HELP PLEASE
    THANKS
    MacBook Pro (13-inch Mid 2012), OS X Mavericks (10.9)

    do you solve this problem?Because ı am living same problem.

  • I have a MacBook Pro Retina (2,3 GHz Intel Core i7 - 8 GB 1600 MHz DDR3 - Intel HD Graphics 4000 1024 MB). I use KompoZer for my website, but after installing OS X Yosemite it doesn't work right (I cannot see images in the website).

    I have a MacBook Pro Retina (2,3 GHz Intel Core i7 - 8 GB 1600 MHz DDR3 - Intel HD Graphics 4000 1024 MB). I use KompoZer for my website, but after installing OS X Yosemite it doesn't work right (I cannot see images in the website).

    It's beta open source software so I'm not surprised. It does't look to be too active a project, so I don't know if it will help or not but you might be maybe better off posting a bug report on their Sourceforge page here: http://sourceforge.net/projects/kompozer/

Maybe you are looking for