2.2 GPIB driver for Solaris doesn't work with Sol. 2.3 tester

Upgraded to 2.2 GPIB driver to fix issue of driver being lost on Sun Ultra60's at shutdown and reboot. The driver works fine with 10 of the 11 tester platforms we use. This tester is a Genesis III running Solaris 2.3. The program will run successfully, but when shutdown and re-started, the drivers are not there and must be re-installed. What to do? Thanks.

Thanks for the suggestion to check privileges, but that's the problem--the driver is not present to have any privileges to check. On reboot, there are only links (all owned by root with 777 perm.) at /dev which lead to non-existent directories.
#/dev> ls -l gpib*
lrwxrwxrwx 1 root other 43 Apr 18 09:50 gpib -> ../devices/pci@1f,4000/NATI,pci-gpib@2:gpib
lrwxrwxrwx 1 root other 44 Apr 18 09:50 gpib0 -> ../devices/pci@1f,4000/NATI,pci-gpib@2:gpib0
lrwxrwxrwx 1 root other 44 Apr 18 09:50 gpib1 -> ../devices/pci@1f,4000/NATI,pci-gpib@4:gpib1
If you try to use these links to go to these dirs, there're not there. Also, ibconf shows no gpib devices loaded.
Any more suggestions would be greatly appreciated.

Similar Messages

Male to male audio cable for car doesn't work with my iphone 4s?

I have a 3.5 mm male to male cable that I have used in my car so I can listen to my music. It works fine with my iphone 3G, but it doesn't work with the new 4s. Is there a special cable I need to use with it? It's weird, because my earbuds work with either iphone, but not the audio cable. Suggestions??

I have the exact same issue with my new 4S.
I haven't find a solution yet.

Download Oracle 10g Release 2 for Solaris doesn't work

Hi,
I think the file to download Oracle 10g Release 2 for Solaris Sparc 64 has incorrect format.
After download I try to do as you suggest:
guzip file
But the result is:
gunzip: 10gr2_db_sol.cpio.gz: invalid compressed data--format violated
Could you check this
Cheers
Angle

But I can download it.Its space is 623M.

Driver for OfficeJet J4580 Not Working with Windows 7 Professional

I am trying to install the driver on a new Toshiba laptop but the driver keeps failing. I have tried the Basic and Comprehensive drivers. After downloading, I get a prompt to extract the driver, then I get an error message that says the file is corrupt, cannot extract. I get the same error message with both drivers. I am downloading the drivers from the HP website. I am using Windows 7 Professional 64-bit. I do not have the printer plugged in (it's plugged into my very old Windows XP laptop and works fine there). I have left e-mail messages to Support through the HP site and have not gotten an answer. Is this printer just too old for my new computer? Do many of the HP printers have problems with Windows 7? Any assistance is appreciated. Thank you!

Hi @OrdinaryHPUser,
Welcome to the HP Forums!
I noticed that you cannot install the driver for your HP Officejet J4580 on Windows 7. I am happy to help!
Full feature software and drivers, are available for this printer on Windows 7. So the printer is compatible. I would recommend to try the following steps:
Uninstall the software. Uninstalling the Printer Software. (Only if the software is partially installed, otherwise you can skip this step.)
Clean boot the computer. How to perform a clean boot in Windows.
Disable any Antivirus programs. Disable Antivirus software.
Disable any firewall programs. Turn Windows Firewall on or off.
Create a new user account. Managing User Accounts and Logins (Windows 7).
Reinstall using the HP Printer Install Wizard for Windows.
Hope this will solve the issue, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Oracle sync for Macintosh doesn't work with Leopard.

I have tried to install the oracle sync client for Mac OS (v 9.x) and it will just not install on any Leopard OS Macs. The console message repeats the error:
5/27/08 11:07:12 AM [0x0-0x12012].Oracle Calendar Sync installer.1[121] 2008-05-27 11:07:12.373 install[126:190b] CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
and
5/27/08 11:07:15 AM com.apple.launchd[81] ([0x0-0x12012].Oracle Calendar Sync installer.1[121]) Stray process with PGID equal to this dead job: PID 127 PPID 126 osascript
The installer does work with Tiger. I have found that it complains about some Java errors when its unpacking itself but I have the most recent version of Java available for this OS.
Any thoughts?

I was able to get the sync to work when I started on a machine running Tiger (OS 10.4) and then upgraded to Leopard, but NOT on any machines that start at Leopard.
I've just about abandoned Oracle Calendar given their (lack of) product support, and likewise for PalmOS devices.
Bring on iPhone.

My WORD for Mac doesn't work with latest upgrade. Any Remedy?

Most recent update to OS caused WORD for MAC not to work. Any Remedy?

If you just updated to Mountain Lion (10.8) and you were using Office 2004, your best option is to find a newer Office replacement. Here are a few:
Office 2008 or newer ($140 and up for the 2011 version; you may find 2008 used elsewhere)
Apple Pages ($15)
LibreOffice (free)
Matt

Download Oracle 10g Client Release 2 for Solaris doesn't work

Hello,
When I try to download 10gr2_client_sol.cpio.gz at this url :
http://download.oracle.com/otn/solaris/oracle10g/10201/sol64/10gr2_client_sol.cpio.gz
I get 0KB file .
How can I do ?

But I can download it.Its space is 623M.

Scanner Driver for Microtek 5900 that works with OS 10.6.6

Is there a driver available for a Microtek 5900 scanner that will work/be compatible with OS 10.6.6???

I would love the answer to this as well....I tried the latest VueScan and it fails to recognize the 5900. The VueScan website says its supported but requires a driver from Microtek's website but of course there isnt one there. I also tried ImageCapture to no avail.
Next step is to load ScanWizard in to the VirtualBox I have running on my Mac, but I would like a native solution.

Mail for Exchange - doesn't work with Ex. server 2...

I wanted to connect my N900 to Exchange server 2003 (ES2003). There is a problem in answer from ES2003. It doesn't answer.
Is there any setting I cannot to find or any apps which can solve this problem?

Bleky wrote:
I wanted to connect my N900 to Exchange server 2003 (ES2003). There is a problem in answer from ES2003. It doesn't answer.
Is there any setting I cannot to find or any apps which can solve this problem?
Check the Maemo Wiki: Mail for Exchange
http://wiki.maemo.org/Mail_For_Exchange_%28MfE%29_Heartbeat_and_FAQ
and discussion at:
http://talk.maemo.org/showthread.php?t=35136

Sony Bridge for Mac doesn't work with my Sony Xperia J

I have installed Sony Bridge for Mac version 3.7.1, but it won't connect to my Sony Xperia J which I have only had for 3 months.
I get the error "Could not connect to your Xperia device. Please disconnect and reconnect it again. Restart the device if the problem persists". All the time.
I have tried all of the suggestions in the error message. I have also tried reinstalling Sony Bridge for Mac, to no avail.
I am running Mac OS X 10.9.2 on an iMac. I am also using the correct USB lead - the one supplied with the phone.
The Mac system log shows this error:
Apr 3 20:42:35 robins-imac.default Sony Ericsson Bridge for Mac[973]: BUG in libdispatch client: kevent[EVFILT_WRITE] delete: "No such file or directory" - 0x2
I suspect that whoever wrote Sony Bridge for Mac did not try it on OS X 10.9.2.
I am seriously thinking of getting rid of this phone and getting one that works properly with the Mac - ie, not a Sony phone. Sony always seem to have problems with supporting Macs, for some bizarre reason.

Hi Yorkshirecomposer,
I will ask the development crew about the system log error. Additionally, could you provide me with error logs to send them as well?
Here’s how to get error logs from Sony Bridge for Mac:
1. In BfM, hold the "alt" key down while selecting the "Phone" menu. Select "Clear logs" to remove all old logs and get a clean start
2. Reproduce the problem you're having, whether it's connecting the phone, importing photos, doing backup...
3. In BfM, hold the "alt" key down while selecting the ”Xperia” menu. Select "Export logs"
4. On the computers desktop there should now be a file named "SonyBridgeForMacLogs_[date].zip
5. PM that file to me or post the contents here
Best Regards,
David

Transparency for JTabbedPane doesn't work with java version 1.5 .......

Hi all,
I have a tabbed pane to which i add a panel. Both tabbed pane and panel are set opaque(setOpaque(false)) and i set background image for main container. It works fine in java version 1.4.2_04 showing all the panels and tabbedpane transparent. But when it run in version jdk1.5 the transparency effect goes off.
what is the problem? how to fix it up? please help....
here below is the code. Take any jpg image as background.jpg.
import java.awt.*;
import javax.swing.*;
import java.awt.color.*;
public class Test extends JDialog {
     float[] white = {.99f, .99f, .99f};
     public Test() {
          UIManager.put("TabbedPane.selected",
               new Color(ColorSpace.getInstance(ColorSpace.CS_sRGB), white, .0f));
          JTabbedPane tabbedPane = new JTabbedPane();
          Color COLOR_WHITE_TRANSPARENT_VAL = new Color(
               ColorSpace.getInstance(ColorSpace.CS_sRGB), white, 0.0f);
          tabbedPane.setBackground(COLOR_WHITE_TRANSPARENT_VAL);
          tabbedPane.setOpaque(false);
          JPanel p1 = new JPanel();
          p1.setOpaque(false);
          tabbedPane.add(p1, "Tab 1");
          // panel for displaying background image
          JPanel backPanel = new JPanel(new BorderLayout()) {
               ImageIcon img = new ImageIcon("background.jpg");
               public void paintComponent(Graphics g) {
                    Dimension d = getSize();
                    g.drawImage(img.getImage(),
                         0, 0, d.width, d.height, null);
                    setOpaque( false );
                    super.paintComponent(g);
          backPanel.setLayout(new BorderLayout());
          backPanel.add(tabbedPane, BorderLayout.CENTER);
          backPanel.setOpaque(false);
          getContentPane().setLayout(new BorderLayout());
          getContentPane().add(backPanel);
          setSize(300, 300);
          setVisible(true);
     public static void main(String[] args) {
          Test test = new Test();
thx,
Soni

Hi Reneto,
We had the same problem in our project where-in we asked BASIS team to install the lower version of JAVA 1.42..
No proper document from SAP for using lower version of JAVA.
I hope this helps.
Regards
Shashidhar

SIS 6326 driver for Solaris Intel platform

Apparently those who used a SiS 6326 chip on the graphics card
cannot find a proper driver for Solaris 8 Intel.
I am having the same problem, is there any way of resolve this problem
so I can make my graphics card work at 100% or does this mean I have to get a different graphics card which is supported by Solaris 8 Intel.

Do you know if there is any other old SiS drivers for Sun? Maybe we can make it work good (at least 50% fine) using an old driver...
PS: If you can, please answer to my email: [email protected]
Thanks in advance...

Voodoo3 3000 driver for Solaris 8 IA

Hi,
I am looking for a 3dfx-Voodoo3 3000 AGP 16MB driver for solaris 8.
Target computer : AMD K7 Tunderbird CPU whit ASUS A7V133 M.B.
Thanks in advance
Regards
Flavio Azra

Hi Shaun,
I had email contact with sun technicians and they told me that they keep on improving graphics support but that there's no Nvidia driver available by now. No one could tell me when they would start to support GeForce chips but they said it's a good idea to use XFree86 instead which comes with in integrated nvidia driver. Version 4.0.3 worked almost right out of the box, version 4.1.0 caused problems so I reinstalled 4.0.3 again.
Hope this helps!
Regards from Germany
Dirk

3dfx driver for solaris 8

Hi,
I am looking for a 3dfx banshee driver for solaris 8. Any pointers. If none exists any pointers to how I could port the 3dfx drivers for linux and glide over to solaris 8. Can I use gcc to do my work?
Thanks in advance
Regards
Nirmal

Hello Flavio,
please i need a driver for Voodoo3 3000 AGP video
adapter, you have one ?No. I wrote a driver for the V2 and it's not very useful - I made it for Solaris Sparc and all you can do is a few IOCTLs and mmap the device memory into userland. The driver does work on i386 but you need the latest MMU patch. I did not have the time yet to port glide - I have something half working for sparc but I have not spend time to make it work on i386. Even with glide working you can't use X11 (one would have to write the X11 drivers and that's a whole new ball game).
How i do to install this driver ? sorry i�m begining
on Sun.If you wish to use it for X11, I would recommend to download the XFree86 binaries for Solaris, since it has support for the V3.
You can get more information about it on www.xfree86.org.
My S.O. is Sun Solaris 8 01-01 (IA) on ASUS A7V133 and
AMD K7 cpu.
Thanks to you, very much.You are welcome!
(desculpe aih o ingles chiclete camarada preciso treinar++)(O ingles esta' bom!).

SQLServer ODBC driver for solaris

Hi,
do anyone know where I can find the SQLServer ODBC driver for solaris in order to use Oracle Heterogeneus
Service?

Easysoft has two ways to do this:
An ODBC-JDBC gateway driver that runs any JDBC accessible database including SQL Server under one license. Apparently, the ODBC C library has a JAVA engine in there to read the vendor JAR files. I tried it on Interbase with windows, and it worked fine.
They also have an ODBC-ODBC bridge, but that implies a Windows Server to provide the real SQL Server ODBC for free with another network hop.

2.2 GPIB driver for Solaris doesn't work with Sol. 2.3 tester

Similar Messages

Maybe you are looking for