2.2 - How to do a Hard Reset

So I was told to ask how to do a hard reset to try to fix my phone since the 2.2 update.
Anyone?

Resetting the phone deletes all data, including downloaded applications, and resets the phone back to its initial state—the state before you turned on the phone for the first time.
Software v2.1 & v2.2 - Hard Reset Option 2
Power device off
Press and hold VOL Down and Power button at same time until screen displays with 3androids at the bottom.
Press VOL down to highlight Clear Storage, press PWR Button to select option
Clearstorage
Delete All User Data?
<VOL UP> YES
<VOL DOWN> NO
Master Reset: Allows user to reset device back to factory settings.
Resetting the phone deletes all data, including downloaded applications, and resets the phone back to its initial state—the state before you turned on the phone for the first time.
Important: Make sure to back up important data you have on the phone before you reset your device.
(Software v2.2) To Factory reset the phone:
Note: If device is non-responsive, try a soft reset first by removing battery and power on device.
From the home screen, touch Menu 
Touch Settings 
Touch SD & phone storage 
Touch Factory data reset 
Tap Reset phone or Reset phone & internal storage 
Tap Erase everything
(Note: Reset may take anywhere from 1 - 10 minutes for reset and restart depending on amount of data on device.

Similar Messages

  • How to format and hard reset N79? *#7370# does onl...

    Hi!
    I tried to format my Nokia N79 with *#7370# but all applications and contacts ect are still there. Is there a way to complettly reset and format the phone? 
    Solved!
    Go to Solution.

    I did this on my phone and most of the problem was being fixed by doing this, but doing this is just easy crazy.... I still have the phone lock issue.... the nokia says the default phone lock was 12345 unless changed.... My phone lock was never been changed but that 12345 never work.... I had tried this hard reset but phone lock was never been reset....
    @gooran - here are the steps with that green button, asterisk, and 3 then power on
    1) switch-off your phone
    2) press and hold these three buttons: green call key, asterisk(*), the number 3 key (def). Make sure don't let go of these three keys unti you had pressed the power key for seconds
    3) your phone may display formatting/deleting, or no display at all, as what haPpened to me, it has no display but others say it would have display....
    4) switch-on your phone and you're done!

  • PLEASE HELP - How to Hard Reset MSI Primo 81 OR RECOVERY

    Hi everyone, I have a problem that I am hoping someone on this forum can help me with. I searched all over this website and through internet searches and can't find the information I need.
    I need to find out how to do a Hard Reset on an MSI Primo 81 Android 4.4 Tablet?
    We just got this device and we set it up with an administrator account with a PIN number and then a second user account with no PIN or Code.
    We have not set it up with a Google account yet.
    My son was in the administrator account and changed the pin and now can't remember what the new pin is. We have tried everything we can think of. He had saw me put my administrator pin in by looking over my shoulder which is how he was able to change it.
    Since the tablet is brand new and has no Google account yet we have no other choice but to do a hard reset. This isn't a problem because we haven't installed anything yet.
    If anyone knows ho to do a hard reset on this MSI Primo 81 your help will be greatly appreciated.
    I don't know if maybe it can be put into recovery mode. I can't figure out how to do that either. If anyone knows how to get this tablet into the Android recovery mode I would appreciate any help with this as well.
    Someone please help us!
    Thanks in Advance.

    The reset of Primo 81 would be long pressing the power key for over 8 secs, but it won't enter the Android recovery mode.
    The better way to solve your problem now is to re-flash the firmware.
    FW Download Link: http://download.msi.com/archive/frm_exe/N821_v4.5rc5_v4.4_20140414.zip
    Updaet Guide: http://www.msi.com/files/pdf/Primo73_75_81_91_93firmware_recovery_en_21.pdf

  • How do I do a hard reset without losing all my stuff from itunes

    Hey I need to know how to do a hard reset on my phone. without losing all mt iTunes stuff. also another question is why do I keep all these stupid error messages, saying this device is already associated with another apple id and cant be used with another apple id for 80 days, and last question I have a lot!!!!!!!! of stuff on this apple id, but its all on the downstairs pc, and ive tried re installing it bc it says this iPhone can not be synced, bc this is not the latest verison of iTunes, and I want all of that on my new laptop, but everytime I go to do all that stuff, the SPOS!!! pc downstairs is so ******** it  srsly it is! bc every single time I try to use it or even wrk on it! it JST FREEZES on me, every time and it JST REALLY IRRITATES ME, AND I AINT GOTS THE PAIENTS? FOR IT!   PLZ HELP ME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 

    How to use your iPod to move your music to a new computer

  • How to make a powered off hard reset

    How to do a hard reset?I have tried the 3+*+call key but it just shows the nokia screen and then asks for the lock code.Thanks.

    Always remember to backup your phone before performing resets as your data may be lost.
    The "3 finger deep reset". With the phone powered off, depress and hold these three keys simultaneously "*" "3" "green phone" and then power on phone using the on/off button whilst keeping all four keys depressed until you hear start-up tone.
    The default lock code is usually 12345 unless you changed it. 

  • Need instructions on hard reset of HP officejet pro 8600

    Hi jason_h ,
    Please message me with the info about how to do a hard reset on my Officejet pro 8600.  Thank you!

    Hello jnycsh,
    Welcome to the HP Support Forums!
    I see that you are trying to reach out to @jason_hto learn about a hard reset for the Officejet 8600. To my knowledge, a hard reset consists of removing the power cord for the printer (while on), ensuring the power is connected to a wal outlet directly and after one minute connecting the power back to the printer.
    If you are looking for a reset, please let me know the issue the printer is having and what troubleshooting steps you have done to try and resolve it.
    Cheers,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Airport Express - cannot read config file - cannot Hard reset

    Anyone, please help!
    I have an Airport Express as an 'add to an existing network' connected to the UFO Base Station (White). The internet connection is fine, but I cannot read the config file to access the wireless printer part. I have tried to reset the express - it resets it goes green still no read. I have tried to hard reset this back to the factory settings. Same thing, it thinks about it then everything is back green, same as before and I still cannot read the config. I will add that I have had to reset or hard reset or mess with this once a week since I got this. Is there anything else I can try. I have nothing connected to the express everything is wireless. Please I do know how to do a hard reset, its just not accepting the command.
    Anyone, please....

    Are you sure it's not alternating amber/green? I have seen it, it's hard to tell, if you are color blind
    , it's even harder.
    http://docs.info.apple.com/article.html?artnum=108045

  • HELP! E6-00 hard reset

    Hey!
    I have difficulties with my new E6-00. It doesnt allow me anything to install, always says "corrupted file". So I checked many forums and i read i have to do a factory/soft/hard reset to solve the problem.
    Factory and soft reset was not successful ( *#7780#  and *#7370#), i still have this problem.
    As for the hard reset... i am not able to find out how to do it. Google is full with spam and false advices like "hold the call buttons and the camera key" - this mobile doesnt even have a camera key...
    So please help me. How to perform a hard reset on E6-00?

    @ aspergerguy - it is not this procedure, because Nokia E6 does not have camera button, as is the N8, C7, etc..
    WIN !!! After seven days, and more than a hundred different manipulations ran my ailing Nokia E6. I will explain this my case, because the forums have not read, of course, if Admin allows. As I wrote earlier, it was not possible to use the procedures reset * # 7780 # , * # 7370 #  or * # 7070 # and ineffective procedures have also been key "Shift + Space + Back Space and Power ON" and " * + 3 + green phone + Power ON ".
      I wrote earlier that the phone was active for only a few minutes, the measurement of 2min 21sek to 3min 57sek , and ended its activities or the F-Secure or on the first screen. Probably none of these procedures were not effective due to the short time since the system will first make a copy and then Delete. I must also say that Service Nokia Care (Regenersis Warsaw) refused to help me saying: "I'm sorry, but virtually we can not help you ..."
      I decided to go back to the standard procedure in the phone, the "Menu> Settings> Phone> Phone management> Factory settings> Delete data and restore." The problem to fit in the available time was my personal long security code.
      Against all actions, for the safety of the phone took out the memory card, which I had stored backups performed every week and performed every 2 months full backup and the phone via a PC running Nokia Suite 3.6.36, was connected to the Internet. As a result, after a short while to reset the phone and started the installation procedure (probably from disk "Z") software system Anna v. 025.007 (previously I had v.021.014).
      To my surprise the phone asked for access to another phone via Bluetooth (in this case had on hand Nokia C7-00 sys. Belle) which took contacts, email account settings and e-mail, news, and more. When you insert a memory card into the phone returned dozens of applications, but around 100 applications and I have to get through some back pay. Finally, the Nokia Suite installation proposed Belle for E6-00, but I decided not to because the system Belle for Nokia E6 has a very bad reviews on the internet and also a lot of applications that I bought the Nokia Store is not available for the system Belle.
    Sorry for quite a long description.

  • Iphone 3gs hard reset

    need to know what how to do a hard reset on I phone 3gs model MB702LL  I want to erase all information on phone. Thinking of selling it is in perfect condition and I have all original box and info etc. Any help appreciated.

    See Here for Restore as New...
    http://support.apple.com/kb/HT1414

  • How to change the batteries on a palm m125 without having to do a hard reset

    Some palm m125's are defective meaning that when one changes the AAA batteries one is presented with a no way out question on whether yes to hard reset or no to not hard reset, yes it's true that what i mean by no way means that even a soft reset will NOT make it work again, hope you just did a backup right.. oh! and this will prob. only work if you have enough battery power to keep the unit on: ie: around 5% battery...
    Anywhoo I have found a workaround for this bug or so that may help you, please read below on how to hopefully preserve the data on your handheld's m125 hardware without this hard reset lockup...
    Note: Testing with rechargeables in (Maxxus 1100 mah) and then put in alkalines = mixed results :/, but alkalines out then new ones in should work fine..
    Okay - fairly simple - Let's start:
    A: Turn on the unit - yes u heard me turn the unit ON
    B: Flip the unit over
    C: While the unit is ON take out the top battery first and replace it as fast as you can with the newer one and make sure it is in before doing the next step...
    D: now do the bottom battery...
    E: turn the unit on by pressing the power button
    Result: If all goes well, u'll see the palm logo and then it should show the prefs screen of which you've successfully saved all ur user data. - What it did was a soft reset.
    So far with alkalines i've had nothing but success - if anyone out there owns a m125 as well and can confirm that this tip works, please post to let others know ur success or unsuccess of trying out my tip..
    My Test Results Tested on Factory State unit (Hard Reset Unit ):
    Alkalines -> Alkalines = 99% (if done correctly) = Pretty Safe*
    Alkalines -> Rechargeables = 50% (if done correctly) = Warning/Caution
    Rechargeables -> Alkalines = Not Consistant enough to measure (if done correctly) = Very Risky
    *If ur unit stills asks on Alka to Alka then Just maybe a software program is now causing it to ask for a hard reset as I'm still testing this.
    If method One does not work out, I've also tried the following with success esp. on Rechargeables -> Alkalines, but this will requre more work and a more steady hand...
    A: Turn the unit ON
    B: Press and hold DOWN button
    C: While holding the Down button, take out the TOP battery first and replace it, DO NOT let go of the down button on the handheld
    D: Now replace the BOTTOM battery
    E: Let go of the Down Button
    F: Press the on button
    If all goes well you will see the palm logo meaning that it just did a soft reset, but ur data should still be intact, With method 2 I was able to get a more success rate. , But I am still testing on when the unit is fully loaded, etc.. as these tests were done on a hard reset unit. You can also try holding the up button instead of the bottom one for a method 3. Again anyone out there with success or unsuccess stories - please tell as i'd like to hear your expierence with my findings here.
    Message Edited by nowshining on 10-14-2008 05:14 PM

    Hi
    Im using fireworks to put it all together visually and mechanically
    and then I'd like to export it to dreamweaver
    This is a bad idea, and will only create problems further down the line. For the correct way to do this see -
    http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt1.html there are 3 parts to this tutorial series.
    As for the effect you wish, (no full page load) this is known as ajax and if you are new and using dreamweaver then the spry framework is probably the easiest to learn, see http://www.webmonkey.com/2010/02/build_ajax_components_with_spry/, your dreamweaver documentation also contains a description of how to use Spry, the full Spry documentation and examples are available at - http://labs.adobe.com/technologies/spry/home.html.
    PZ

  • I am suddenly having a problem with my iMac - when I try to restart or shut down, it hangs on a gray screen, and I have to hard reset to turn it off.  How do I fix this?

    I am suddenly having a problem with my iMac - when I try to restart or shut down, it hangs on a gray screen, and I have to hard reset to turn it off.  How do I fix this?

     
    http://support.apple.com/kb/TS2570 Mac OS X: Gray screen appears during startup 

  • How can I do a hard reset without losing app data?

    I have international texting on my phone and it's having an issue sending images to my friends overseas. The words go through but no media.
    I have Verizon's More Everything plan and after two days trying to get this sorted on their end, they want me to try a hard reset and test the texting before I restore my backup to see if it's something in the phone.
    the last time I had to do this I lost EVERYTHING regarding data in my apps. Some of the apps I have now I cannot afford to lose the info stored in them.
    I need to make sure that I can restore safely once we are done with the troubleshooting.
    If I have to manually put my items back in, HOW can I do that with the apps I really need the data preserved?
    FYI - ALL my settings for iMessage are correct.
    My international friends are not using iPhone AND I checked my settings there and they too are correct.
    So, before I go and wipe everything out, can someone reassure me with some directions and ease my worries?
    iPhone 5
    iOS 8.1

    Twitchin Kitten wrote:
    razmee209 wrote:
    My response was to the OP and not you.
    OK I'm going to say this for the what? 3rd time?
    I know the difference between a hard RESET and a full RESTORE. My mistake in the OP was mixing up the WORDS.
    If you read carefully, you would have probably figured it out without all this arguing.
    I'm going to make this simple ok?
    Verizon wants me to do do a RESTORE and NOT put my data back in from the backup.
    They want me to test what is broken to see if it works.
    If it works, then i am to RESTORE THE BACKUP and test again.
    I just don't want to lose data on the backup and restore. I have indeed lost data with restoring a backup when iOS 7 came out. It was a disaster.
    I fully understand what you are saying but I am TRYING to explain that it failed the last time I had to do this. I cannot make myself any more clear.
    Now, I think I'm done with this since it's all become such a topic of contention. All I wanted to know is if it could be done without losing data and now the stupid cloud comes into it, those with good intentions are getting yelled at by the guy with the basketball avatar and I just don't have the strength to keep repeating myself.
    All of this would be so easy if people took the time to read all the words and when / if not sure, read it again. That's what I do and I find it helpful.
    You should probably go back and re read all of my response to you.  Which answered all your question.  I don't need to repeat myself again and again.

  • All-In-One C4780 screen is stuck on a loop. How can I hard reset the printer?

    I have a C4780 and am running Windows 7. I have had the printer for 2 years and never had a problem until recently. I have been unable to print for months because the touch screen on the printer is stuck in a loop. I first noticed the problem because I could hear random beeping and printer movement from the other room. It was doing it all on it's own. There were no changes to the computers, wireless or anything. I had just used it 2 weeks prior to print a passport photo and it worked fine.
    It thinks I am trying to print from a memory card and asks me to insert the card. Then it thinks I am trying to print a passport photo. Then it thinks I am scanning and asks me to place the photo face down. (etc, etc) If I try to hit cancel on any of the screens, it moves on to a different task it thinks I want done. If I try to follow through with the task it wants to do, it cancels it on it's own and moves on to another task. It will also move through the screens and tasks without me around. It moves so quickly through the screens that when I do try to get to a certain screen, I sometimes can't, because the printer has taken off in a different direction of screens all on its own.
    All software is up to date.
    I have tried turning it off, unplugging it, waiting, plugging it back in, turning it on.
    I have tried unplugging it while it is on, waiting, plugging it in and turning it on.
    I tried a semi-full reset by pressing bottom left 4 times. It was actually really difficult because the printer kept changing screens randomly while I was doing it. I finally got it to do the reset. It got to the "now printing alignment page..." screen and then just moved on to the main screen. Never printed the page. Shortly after that it started doing the screen loop with wireless settings. And now it is back to doing a loop through all the screens again. 
    It seems to be pushing buttons on its own.
    Does anyone have any idea of how I can fix this? Is there a way to do a hard-reset on this printer? Restore it to factory settings? Or doing you think there is something physically wrong with the touch screen where it is actually pressing buttons on it's own?

    I'm having the same problem, including paper running through the printer randomly. I believe I completed a semi-full reset that (so far) has stopped the paper going through the printer. And, the random changes on the touch screen seem to have stopped too. But, the touch screen still lights up and goes dark randomly, whcih leads me to believe that all is still not well.
    I too would like to try and hard reset if one is possible on this machine.

  • HT1515 Just installed Airport Express on Mac 10.6.8  Can't see base station.  Hard Reset the Airport.  Rebooted machine.  How can I tell if this is a Mac problem or Airport Express Problem?

    I have a Mac 10.6.8.  Just installed Airport Express.  I can't see any base stations.  I did a hard reset on the Airport Express, turned off all devices,  turned them back on.   I see plenty of Airport networks in the neighborhood.  How can I tell if I have a Mac problem or an Airport Express problem?  Airport Express blinks Amber. 

    Obviously,  I'm still using ethernet to be able to reply to this.
    Alright, use the same ethernet cable to plug directly into the airport express. This will FORCE the airport utility to now see it regardless of weak signals & interference. You can set it up that way.
    BTW, what is the original intent on the express?

  • How To Hard Reset N8

    Just to help people who have reported problems re-setting the N8, apparently there is a button combo to reset, Kudos to AAS 
    http://www.allaboutsymbian.com/news/item/12185_Ano​ther_three_finger_salute_do.php
    Text below has been added by Nokia:
     Important information from the official N8 FAQ
    (http://europe.nokia.com/support/search?page=1&full​content=true&cat=support&cnt=1&qt=n8+reset)
    You
    should not use the "three finger" reset (pressing volume down + camera key +
    menu key and pressing power button) to hard reset the Nokia N8-00 device. Doing
    this will delete some applications (Ovi Store, Ovi Maps, some preinstalled
    widgets) which cannot be restored.
    If the device needs to be reset, try the following methods
    instead of the "three finger" reset:
    Press down the power button for 8
    seconds.
    Restore the factory settings by selecting Menu
    > Settings > Phone > Phone management > Factory settings >
    Restore.
    The "three finger" reset should be used only
    as a last resort if the device cannot be booted up in any other way.
    If
    successful, the device can be used after the reset but some of the applications
    are missing. The device needs to be taken to a Nokia Care point for reflashing
    to get the original applications back in the
    device.
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

    Just in case someone needs to reformat the Nokia N8, a Forum Nokia blog post describes how to do this. Excerpt:
    How to Full Format your bricked N8?
    Many guys here face the "brick" problem after trying to play with FontRouter. So I have to find the way to recover it and at last I found one. (And I have to warn you here that DON'T USE FontRouter ON YOUR N8 OR YOU WILL BRICK YOUR DEVICE)
    Here is the method to full format and make bricked N8 come alive again:
    1) Turn off your phone
    2) Hold "Volume Down + Camera Key + Menu Key" and press power button until your phone shake
    3) Wait until screen show properly... and welcome back!!
    Please note that I found these problems after doing full format:
    1. I lost Ovi Maps. However, you could reinstall it by download it here
    2. I also lost Ovi Store 2.0 and I can't reinstall it since it always show "Unable to install".
    So please DON'T do full format if not neccessary or actually I must say that DO IT ONLY AS YOUR LAST CHOICE.

Maybe you are looking for

  • My PDF presets/joboptions dont work in Acrobat Pro 9.0 - help!

    We just upgraded from CS2 & Acrobat Pro 7 -- to CS4 & Acrobat Pro 9 - Windows. Previously I would  go here: C:/Documents  and Settings/All Users/Shared Documents/Adobe PDF/Settings to manage my  joboptions. But after my upgrade, when I go to create a

  • InDesign Keeps freezing when I am working on a project.

    Recently, my version of InDesign CS4 has been freezing after about 5 minutes of working with the program. I constantly have to forecfully shut down InDesign and then am constantly having to recover my documents. I have had the program for almost 2 ye

  • My Blackberry needs to be charged everyday

     I bought a Sprint Blackberry back in June of 2008. In November 2008 my phone needed to be charged everyday because the battery was draining fast. Regardless if I made 10 calls in one day or 1 call a day I have to recharge it everyday. I am not a hea

  • Cannot Perform Tune-Up

    I am no longer able to perform a health analysis or perform a tune-up.  How to fix this?

  • *RUNALLOCATION and ACCOUNT scope in default logic

    hello, I'd like the default logic to execute a specific computation depending on the account the user has input values onto from his input schedules : - if the user inputs values on account1, I want the default logic to execute Computation1 only. - i