2.2 MPB quieter/not as hot as 2.4 due to weaker gfx card?

Title says it all. Just assuming that the 2.2 MPB wouldn't create as much heat, therefore not as much fan activity due to its weaker gfx card and slower processor. Am I correct with this assumption? If I am, is it really noticeable? Fan noise is a real stickler for me... would like to not be able to haer the fans when just browsing the web/ ichatting it up. Thanks in advance!

Am I correct with this assumption?
Nope… sorry.
You will find that the GPU is exactly the same with the only difference is the quantity of VRAM. As for the processor, the 2.2Ghz and 2.4GHz are actually made exactly the same and in the same manufacturing process. What makes a 2.2GHz unit though is that for various reasons it's not able to be clocked at 2.4GHz (or higher). Heat being a common factor where a unit is classed as 2.2GHz rather than 2.4GHz. This is why you often find that even though a processor is clocked slower it's actually no cooler.

Similar Messages

  • I have put Netflix on my Macbook Pro but Silverlight will not run. I receive a black screen that says "player error." Does anyone have a solution for this. Netflix support is not so hot.

    I have put Netflix on my Macbook Pro but Silverlight will not run.I receive a black screen that says "player error." Does anyone have a solution for this. Netflix support is not so hot.I can use Netflix straming thru my Blueray on my TV but it will not run on my Pro. Thanks

    Try running Safari in 32 bit mode.  In get info box for Safari,
    check open in 32 bit mode.  There have been some oddities
    on some systems that can cause some issues.
    I had thought MS had fixed this, but may not have.

  • HT201320 I changed my yahoo password but now can not access mail on my iPad  The settings for email is not a hot link

    I changed my yahoo password but now can not access mail on my iPad  The settings for email is not a hot link

    Go into setting on the iPad
    Mail, Calendar, contact...
    Tap your email account
    back out the dots and enter the correct passcode.

  • Guys pls help!!! My ipad 4th gen with wifi is heating up. It's very hot not that hot but normal in all sides of the back of the ipad. WHAT SHOULD I DO????!!!! PLS HELP???!!!!!

    GUYS PLS HELP!!! MY IPAD 4th GEN WITH WIFI IS HEATING UP. IT'S VERY HOT NOT THAT HOT BUT NORMAL LIKE ONE HALF TO HOTTTER. WHAT SHOULD I DO????!!!!!! PLS HELP GUYS!!!

    I use my iPad 4 without a sleeve/case only a sticker on the back. Not hot at all.

  • I just recently purchased 3 songs from itunes not knowing that I had no money on my debit card (visa) left. My iphone wont let me update my apps and says that there was a billing problem with my last purchase. I dont know what I am supposed to do!

    I just recently purchased 3 songs from itunes not knowing that I had no money on my debit card (visa) left. My iphone wont let me update my apps and says that there was a billing problem with my last purchase. I dont know what I am supposed to do! I dont understand why it worked in the first place when it wasn't supposed to!

    There seems to be a billing problem with the iTS.  I've been trying to make purchases today (Dec 9th) too and it reports either the iTS can not process payments or it says my card was declined. I even changed the payment method to Paypal (which is never declined) and still no go.
    I don't think it is "you" but a problem at Apple.  Some popular new apps were released recently like Logic Pro and perhaps they're getting bombarded as they did when Lion was released.
    Wait a few hours and then try again.

  • Installed flash disk does not boot (Solaris 10 on Fore CPU-50 VME cpu-card)

    Greetings,
    After installation of Solaris on a system with a flask disk as system disk, the disk is not bootable.
    Configuration:
    System: Fore CPU-50 VME cpu-card (sparc50)
    OS: Solaris 10 (Sparc version, CD-media)
    System-disk: ADTRON S35FA-8GC20N Smart Storage 3.5” SCSI Flash pack.
              (configured as c0t1d0)
    Error message at boot:
    Can’t read disk label
    Can’t open disk label package
    When I mount the installed disk on another system I can read and inspect the flash disk.
    The logging files begin.log, finish.log and install_log in the /var/sadm/system/logs/ directory don’t mention any errors during installation phase.
    The logging file /var/sadm/system/logs/install_log begins with:
    Configuring disk
    -     Creating Solaris disk label (VTOC)
    Creating and checking UFS filesystems
    -     Creating / (c0t1d0s0)
    -     etc.
    This install_log file ends with:
    Installing boot information
    -     Installing boot blocks (c0t1d0s0)
    -     Updating system firmware for automatic rebooting
    How can I make this flash disk bootable?
    Thanks,
    Herm

    It's a G3 with the integrated 5 i Smart array
    controller. There are driver updates for Sol 10 on
    the HP side. Just filter for OS. There you get the 5i
    driver !
    greets
    D@veI searched the HP site, but wasn't able to find the driver for Solaris 10. Could you give me the url? I did find links for drivers for Solaris 8 & 9 though.
    Thanks,
    -Jeff

  • New GFX card, Quartz Extreme error, and suddenly FCP 6 will not run. Help me fix this problem please!

    Model Name: Mac Pro Model Identifier: MacPro1,1 Processor Name: Dual-Core Intel Xeon Processor Speed: 3 GHz Number Of Processors: 2 Total Number Of Cores: 4 L2 Cache (per processor): 4 MB Memory: 7 GB Bus Speed: 1.33 GHz
    My old GFX card nVidia GeForce 7300GT which is busted.
    I replaced it with a nVidia NVIDIA Quadro FX 4500 from a Mac Pro of the same generation.
    I'm now getting a Quartz Extreme error whenever I try to run Final Cut Pro 6 or Compressor. "This system does not meet the following minimum requirements: Final Cut Pro 6 requires that your system have a Quartz Extreme capable video card."
    Well, I checked the specs of the card and it does support Quartz Extreme. So why isn't FCP 6 running?
    Looking under the System Profiler > Graphics/Displays, it doesn't say the Cinema HD Display supports Quartz Extreme, but how could that be, because the Quadro 4500's specs online says it does?!! This was the better GFX card made for the same generation of Mac Pro but somehow doesn't work!
    This is also effecting my DVD player App with an error: "A valid video device could not be found for playback: -70017". Which has never happened before either.
    I've researched online and can't find anything that works.
    The card has power running to it and the monitor is hooked into the closest DVI port to the logic board which most of people with the same problem have done to fix this. I've also gone into the Disk Utility and ran both Verify and Repair permissions and the same for the boot disk.
    Nothing. I'm stumped. Short of trying to flash the ROM on the GFX card I'm not sure what to do. And I'm not comfortable doing that. Help please?
    I'm using Final Cut Pro 6 and subsequent older versions of Motion and Compressor, not FCP X or companion series.
    HELP!!!!

    You should go to the Mac Pro community to get a better audience.
    https://discussions.apple.com/community/desktop_computers/mac_pro

  • I did not authorize 2 in app purchases and because my credit card is at its limit, and i dont know how to reverse the in app purchases, i cannot update any app or do just about anything in the appstore or itunes store. I paid for apps, i demand my updates

    I did not authorize 2 in app purchases and because my credit card is at its limit, and i dont know how to reverse the in app purchases, i cannot update any app or do just about anything in the appstore or itunes store. I dont care if i owe apple's itunes appstore a few dollars over 2 in app purchases i never meant to download in fact the whole app itself i wanted to delete...but out of the hundreds (maybe lower thousands) fof dollars in music and apps and whatever else, that i rightfully purchased over the passed couple of years....should *NOT* have the upgrades and/or previous purchased songs withheld from me over $3 in accidently purchased add ons through an existing app i deleted an disliked anyway

    Same thing happened to me with my peruvian credit card in the peruvian app store, I want to buy an app, but it says that my credit card is "not supported in the Peruvian app store"

  • DBCA can not use ASM for database storage due to following reason: Could no

    Hi
    I've a recently installed RAC11gR2(11.2.0.3) on HP-UX
    I installed Grid Infrastructure with grid user:
    Node1: # id grid
    uid=1100(grid) gid=1000(oinstall) groups=1031(dba),1021(asmdba)
    Node2: # id grid
    uid=1100(grid) gid=1000(oinstall) groups=1031(dba),1021(asmdba)
    I installed the Oracle Server with oracle user:
    Node1: # id oracle
    uid=1101(oracle) gid=1000(oinstall) groups=1031(dba),1021(asmdba),1033(oper)
    Node2: # id oracle
    uid=1101(oracle) gid=1000(oinstall) groups=1031(dba),1021(asmdba),1033(oper)
    All related Grid Infrastructure is functioning well in both nodes:
    $ crs_stat -t
    Name Type Target State Host
    ora.DATA.dg ora....up.type ONLINE ONLINE node03
    ora.FRA.dg ora....up.type ONLINE ONLINE node03
    ora....ER.lsnr ora....er.type ONLINE ONLINE node03
    ora....N1.lsnr ora....er.type ONLINE ONLINE node04
    ora.asm ora.asm.type ONLINE ONLINE node03
    ora.cvu ora.cvu.type ONLINE ONLINE node04
    ora.gsd ora.gsd.type OFFLINE OFFLINE
    ora....network ora....rk.type ONLINE ONLINE node03
    ora.oc4j ora.oc4j.type OFFLINE OFFLINE
    ora.ons ora.ons.type ONLINE ONLINE node03
    ora.scan1.vip ora....ip.type ONLINE ONLINE node04
    ora....SM1.asm application ONLINE ONLINE node03
    ora....03.lsnr application ONLINE ONLINE node03
    ora....d03.gsd application OFFLINE OFFLINE
    ora....d03.ons application ONLINE ONLINE node03
    ora....d03.vip ora....t1.type ONLINE ONLINE node03
    ora....SM2.asm application ONLINE ONLINE node04
    ora....04.lsnr application ONLINE ONLINE node04
    ora....d04.gsd application OFFLINE OFFLINE
    ora....d04.ons application ONLINE ONLINE node04
    ora....d04.vip ora....t1.type ONLINE ONLINE node04
    $
    The ASM instance are running well in both nodes
    Connected with oracle user, the listener has registered perfectly the ASM instance in each node:
    $
    $ lsnrctl status
    LSNRCTL for HPUX: Version 11.2.0.3.0 - Production on 16-MAY-2012 15:41:06
    Copyright (c) 1991, 2011, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for HPUX: Version 11.2.0.3.0 - Production
    Start Date 16-MAY-2012 15:24:19
    Uptime 0 days 0 hr. 16 min. 47 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/11.2.0/grid/network/admin/listener.ora
    Listener Log File /u01/app/grid/diag/tnslsnr/node03/listener/alert/log .xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=16.0.0.133)(PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=16.0.0.136)(PORT=1521)))
    Services Summary...
    Service "+ASM" has 1 instance(s).
    Instance "+ASM1", status READY, has 1 handler(s) for this service...
    The command completed successfully
    $
    $
    DATA & FRA disk group are created:
    $
    $ echo $ORACLE_SID
    +ASM1
    $
    $ asmcmd
    ASMCMD>
    ASMCMD> ls -lt
    State Type Rebal Name
    MOUNTED EXTERN N DATA/
    MOUNTED EXTERN N FRA/
    ASMCMD>
    ASMCMD>
    The big issue is... that the DBCA can not see the diskgroups. When I choose ASM Storage it can not see them. It shows the chart in blank and if i try to write the disk group, so the following message appears: can not use ASM for database storage due to following reason: Could not connect to ASM due to following error: ORA-01034 ORACLE not available
    What can be passing in this case... ?
    Thanks in advance

    Thanks both
    Really the problem initially was because of this:
    [INS-06006] Passwordless SSH connectivity not set up between the following node(s): [node1, node2]. CVU may reports "PRVF-4007 : User equivalence check failed for user "user"" for same error
    and I had to install node1 first and after node2 manually and perhaps for this the product was not well linked.
    I resolved the problem establishing the keys with the wizard and after copying the following files from node1 to node2
    /home/grid/.ssh -------> /home/grid/.ssh
    authorized_keys
    known_hosts
    This is the procedure if you run the wizard at the node1.
    The problem is that the wizard creates the keys incompletely...
    Thanks

  • Getting error The user could not be registered at this time due to an internal error in R11

    We created new Organization (that had alpha numeric value e.g.  7777A) using Customer Online to be used in iStore i11 version. 
    The user account and password was also created for the organization.  When we tried to login to istore the first time the registration screen (jtftmplh.jsp) was displayed.  After filling the needed information and submitting we get the error:
    "The user could not be registered at this time due to an internal error Please contact the system administrator if this problem persists.
    Note to System Administrators: View source for more information about this error."
    But if we created new Organization with numbers only  e.g. 7777  we don't have the issue. Yet we already have large number of organization with alpha numeric and they work fine. (believe they were pragmatically loaded).
    The profiles "HZ: Generate Party Number" and "HZ: Generate Party Site Number" are set to Yes.
    ==> Here is the error in the page source:
    Message: The user could not be registered at this time due to an internal error
    Please contact the system administrator if this problem persists.
      Note to System Administrators: View source for more information about this error.
    Stack:
    oracle.apps.jtf.base.resources.FrameworkException: The user could not be registered at this time due to an internal error
    Please contact the system administrator if this problem persists. 
    Note to System Administrators: View source for more information about this error.
        at oracle.apps.jtf.um.template.TmplUtils.action(TmplUtils.java:406)
        at _oa__html._jtftmplh._jspService(_jtftmplh.java:3961)
        at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java)
        at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java)
        at oracle.jsp.JspServlet.doDispatch(JspServlet.java)
        at oracle.jsp.JspServlet.internalService(JspServlet.java)
        at oracle.jsp.JspServlet.service(JspServlet.java)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
        at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java)
        at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java)
        at _oa__html._jtftmplh._jspService(_jtftmplh.java:3870)
        at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java)
        at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java)
        at oracle.jsp.JspServlet.doDispatch(JspServlet.java)
        at oracle.jsp.JspServlet.internalService(JspServlet.java)
        at oracle.jsp.JspServlet.service(JspServlet.java)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
        at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java)
        at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java)
        at _oa__html._jtftmplh._jspService(_jtftmplh.java:2342)
        at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java)
        at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java)
        at oracle.jsp.JspServlet.doDispatch(JspServlet.java)
        at oracle.jsp.JspServlet.internalService(JspServlet.java)
        at oracle.jsp.JspServlet.service(JspServlet.java)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
        at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java)
        at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java)
        at _oa__html._ibeCRgpBusinessCreate._jspService(_ibeCRgpBusinessCreate.java:1467)
        at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java)
        at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java)
        at oracle.jsp.JspServlet.doDispatch(JspServlet.java)
        at oracle.jsp.JspServlet.internalService(JspServlet.java)
        at oracle.jsp.JspServlet.service(JspServlet.java)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
        at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
        at org.apache.jserv.JServConnection.run(JServConnection.java:294)
        at java.lang.Thread.run(Thread.java:680)
    Caused by: oracle.apps.jtf.base.resources.FrameworkException: IBE_ERR_UM_REG_USER
        at oracle.apps.ibe.um.RegisterBusiness.handle(RegisterBusiness.java:1157)
        at oracle.apps.jtf.um.template.TmplUtils.action(TmplUtils.java:379)
        ... 37 more
    Caused by: oracle.apps.jtf.base.resources.FrameworkException
        at oracle.apps.jtf.base.resources.FrameworkException.convertException(FrameworkException.java:607)
        at oracle.apps.jtf.base.resources.FrameworkException.addException(FrameworkException.java:585)
        at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:66)
        at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:88)
        at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:202)
        at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:218)
        at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:249)
        ... 39 more
    The error message is not helpful and not clear of the error. How can we register users with alpha-numeric value (if that is the issue?).
    Thanks for your assistance.

    Been like this for a couple of days.  Is this something that happens from time to time?

  • HT5642 I need to update iOS 6.1.3 on my iPad2 to 6.1.6, due to security issue. Why is no update available? I do NOT want to install iOS 7, due to memory limitations.

    I need to update iOS 6.1.3 on my iPad2 to 6.1.6, due to security issue. Why is no update available? I do NOT want to install iOS 7, due to memory limitations.

    Any upgrade will be to the most recent, compatible version, in this case 7.0.6.

  • Window 8.1 is not allowing Elements Organizer 11 to import pictures from SD card into Organizer

    After installing Windows 8.1, I am no longer able to import pictures from SD card into Organizer as Elements simply stops working after Import from Card reader is selected. Obviously I am shutdown from importing pictures.

    Windows 8.1 is not allowing Elements Organizer 11 to import pictures from SD Card in card reader into Elements Organizer. The Elements Program goes to a blue circle and the program times out.
    I have:
    Tried different SD cards
    Tried different card readers,
    I can import off files or folders. However card reader does not show up on this menu within Elements.
    There is obviously some workaround that could be contemplated BUT Elements Organizer cannot import from SD card in card reader and this is a very inconvenient situation.  It worked fine in Windows 8.0.
    I would appreciate a reply. Thank you.

  • My early 2011 MBP 13" does not recognize my Sandisk 16GB 45MB/s Extreme Pro SDHC card.  I went to the Genius Bar and we tried it in all the MacBook Pro's in the Apple Store and NONE could recognize the card.  However, iMacs did.  Any suggestions?

    My early 2011 MBP 13" does not recognize my Sandisk 16GB 45MB/s Extreme Pro SDHC card.  I went to the Genius Bar and we tried it in all the MacBook Pro's in the Apple Store and NONE could recognize the card.  However, iMacs did.  Any suggestions?  Genius behind the Bar suggested wait for LION OS X release...

    You really don't need to post multiple times, you will get attention eventually.
    Find the reply here:
    MacBook Pro 13 (MBP 8,1 random restarts)

  • I am trying to configure my SCXI-1540 card for excitation voltage and frequency using MAX - but it is not giving me that option when I click on the card and then properties​, am I looking in the wrong place?

    I am trying to configure my SCXI-1540 w/1315 card for excitation voltage and frequency using MAX - but it is not giving me that option when I click on the card and then properties, am I looking in the wrong place?
    I have LabVIEW Express 7.0 Professional - SCXI-1000 Chassiss - along with SCXI-1112, and SCXI 1520/1314 - cable to the PCI-6052E is attached to the 1520 card.
    MAX says it recognizes all the cards in the chassiss.

    Jeremy, Thanks for the reply.
    I tried to set up the system as DAQmx.
    I had MAX auto-detect the set-up - and it recognized all the cards - but did not select the 1315 accessory on the 1540 card - I had to do that manually - but in the configuration section I would select the accessory and it would deselect itself. I had to get out of the set-up and then right click on the 1540 card and click on the "Accessories" tab and select the 1315 terminal block that way.
    It didn't seem right that the system should behave that way, but I pressed onward.
    I then tried to create a new DAQmx Task
    When I create new DAQmx task and then click on Analog Input no "Position" Tab appears for me to select, all I get are:
    Analog>>Voltage
    Analog>>Temperature
    Ana
    log>>Strain
    Analog>>Current
    Analog>>Resistance
    Analog>>Frequency
    Analog>>Custom Voltage with Excitation
    Do you think there might be something wrong with either my hardware or perhaps my configuration that is not allowing it to recognize the 1540/1315 in DAQmx?
    I had included the system report of what programs I am using, etc. as attached file nireport.txt
    After the DAQmx did not work I tried installing everything as Traditional DAQ and it did let me set-up the 1540 Card with Excitation Voltage and Frequency and gain - I then went in to the VI that I had built and tried to use the Express DAQ Assisant to read the channel that I am connected to on the 1315/1540 - when I try to use DAQ Assistant it gives me an error saying that "Device not available in NI-DAQmx. It is possible that the device is being use by traditional NI-DAQ"
    Which I guess it is since both configurations are now set-up in MAX.
    I would PREFER to use the DAQmx set-up, but I am confused as to WHY it won
    't come up with
    Analog input>>POSITION>>LVDT
    When I try to create a new DAQmx task.
    Thanks for the help so far! As you can probably tell I am new at this.
    Ryan
    Attachments:
    nireport.txt ‏2 KB

  • I can not login to a certain account due to an error stating cookie not enabled, however my 3rd party cookies are enabled. How do I correct this?

    I can not login to a certain account due to an error stating cookie not enabled, however my 3rd party cookies are enabled. How do I correct this?

    COOKIE_DOMAIN=.hackers
    I think this is the problem. .hackers is no valid cookie domain. You have to use something like:
    .xy.ab
    (two points)
    I fear it is not possible to correct this easiely. First change the hostname to something allowed e.g. hackers.com
    Then open an ldap browser and edit ou=iplanetamplatformservice,ou=services,dc=hackers
    There is an entry with an xml. Copy the xml to an editor, search for .hackers, change it to a valid domainname.
    Im not sure if a restart of the webserver is necessary here.
    Another idea: You could also try to set the cookie domain to solnce.hackers, maybe this is accepted, even if it is not a cookie domain. But I dont know if this works...
    hth
    Chris

Maybe you are looking for