2.3.340 Problems, can you go back to 2.3.15?

I am one of the few who got the 2.2.340 update the other night. I see why it shouldn't have been made available, or pushed to some handsets. I am having issues with the update, big time, and am wishing I had never pulled it. So basically I would love to know if there is anyway to revert back to 2.3.15? And would I just be wasting my time calling Verizon Tech Support? And just as a side note, no I don't want to root my phone. Thanks for any help and insight on this issue.

nolafire wrote:
All my problems seem to revolve around the phone being plugged in. Everything works fairly well when not plugged in, But the phone does not respond properly to touch actions when plugged in. Examples are, screen freezes, will not respond to keyboard, and last night phone crashed and rebooted after plugging in. As well as Madden, that was a big part of this update, freezes every time it is opened. The phone works well enough to continue using it until gingerbread, but I was just curious if there was a way to just go back to 2.3.15 and go from there. And from what I am gathering, there is no way to do that.
Try checking for any possible incompatible apps installed that may be causeing your issues, also I also thought I would also point out the update just realease (2.3.340) is a bugfix version on Froyo not Gingerbread, Droid X has not recieved this update as of yet.

Similar Messages

How can you enable back the Android native Menu button in AIR 2.7?

I've noticed in AIR 2.7 for Android, that now the bottom icons in Android 3.0 Honeycomb are hidden (replaced by small dots) in AIR 2.7, whereas in AIR 2.6 they were always visible. That's cool. Since the bottom bar can never be hidden in Android 3, at least now those icons are less visible (unless you intentionally touch the bottom bar, then the icons show up for a few seconds).
BUT I also noticed in AIR 2.7 compiled apps, the native "Menu" icon is not visible anymore, even after touching the bottom bar. In AIR 2.6 you could see and press that button (which can be captured from AIR so you can show a custom settings menu or whatever).
So, quoting the subject --> How can you enable back the Android native Menu button in AIR 2.7?

There is a work around and a reason for the menu issue. Honeycomb doesn't natively support a menu softkey, it is only to support old apps comiled in phone API levels. If you compile a Honeycomb app in 2.7 or 3.0, it is expected you manage the settings within the larger tablet UI framework. See below link for more info and work around.
http://forums.adobe.com/message/3964792#3964792

Apple Composite AV Cable no longer working on Ipad2 after ios8 update. Only getting sound, can you revert back to ios7 or buy a cable that will work any help would be appreciated

Apple Composite AV Cable no longer working on Ipad2 after ios8 update. I'm only getting sound no video can you revert back to ios7 or buy a cable that will work any help would be appreciated
Thanks

The 30-pin connector on the iPhone 4 dock might not have all the connector pins to do video.
I'm 99% sure the Universal Dock does have the pins (and therefor supports video out).

HT201263 my ipad give me the apple sign without running up it appears all the time in the screen , i tries to reset my ipad , but still in this problem , can you please help me?

my ipad give me the apple sign without running up it appears all the time in the screen , i tries to reset my ipad , but still in this problem , can you please help me?

You may want to look at this about using recovery mode to restore your iPad.
http://support.apple.com/kb/ht4097

How can you get back to the registration screen to change information once registration is complete

how can you get back to the registration screen to change information once registration is complete?

You don't have to. Just go to Apple's Express Lane and add products.

On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?

On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?

I have find the codec installed on my PC do you see an undesirable one I have highlighted the one that seems strange should I uninstall how can I do this safely
Daniel
Codecs audio
Type
Nom
Format
Binaire
Version
ACM
Codec Microsoft IMA ADPCM
0011
ACM
CODEC A-Law et u-Law Microsoft CCITT G.711
0007
ACM
Codec audio Microsoft GSM 6.10
0031
ACM
Codec Microsoft ADPCM
0002
ACM
Fraunhofer IIS MPEG Layer-3 Codec (decode only)
0055
ACM
Convertisseur PCM Microsoft
0001
DMO
WMAudio Decoder DMO
0160, 0161, 0162, 0163
WMADMOD.DLL
6.1.7601.17514
DMO
WMAPro over S/PDIF DMO
0162
WMADMOD.DLL
6.1.7601.17514
DMO
WMSpeech Decoder DMO
000A, 000B
WMSPDMOD.DLL
6.1.7601.17514
DMO
MP3 Decoder DMO
0055
mp3dmod.dll
6.1.7600.16385
Codecs vidéo
Type
Nom
Format
Binaire
Version
ICM
Microsoft RLE
MRLE
msrle32.dll
6.1.7601.17514
ICM
Microsoft Vidéo 1
MSVC
msvidc32.dll
6.1.7601.17514
ICM
Microsoft YUV
UYVY
msyuv.dll
6.1.7601.17514
ICM
Codec Intel IYUV
IYUV
iyuv_32.dll
6.1.7601.17514
ICM
Toshiba YUV Codec
Y411
tsbyuv.dll
6.1.7601.17514
ICM
Codec Cinepak de Radius
cvid
iccvid.dll
1.10.0.13
DMO
Mpeg4s Decoder DMO
mp4s, MP4S, m4s2, M4S2, MP4V, mp4v, XVID, xvid, DIVX, DX50
mp4sdecd.dll
6.1.7600.16385
DMO
WMV Screen decoder DMO
MSS1, MSS2
wmvsdecd.dll
6.1.7601.17514
DMO
WMVideo Decoder DMO
WMV1, WMV2, WMV3, WMVA, WVC1, WMVP, WVP2
wmvdecod.dll
6.1.7601.18221
DMO
Mpeg43 Decoder DMO
mp43, MP43
mp43decd.dll
6.1.7600.16385
DMO
Mpeg4 Decoder DMO
MPG4, mpg4, mp42, MP42
mpg4decd.dll
6.1.7600.16385
De : sarika02
Envoyé : 17 juin 2014 19:26
À : Daniel Cloutier
Objet : On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
created by sarika02 <https://forums.adobe.com/people/sarika02> in Photoshop Elements - View the full discussion <https://forums.adobe.com/message/6466796#6466796>

HT1351 the devices is not popping up in our itunes. is anyone else having this problem. can you help me if you have

the devices is not popping up in our itunes. is anyone else having this problem. can you help me if you have the same problem

Try rebooting the computer and restarting the device.
Try a different cable.
In rare cases fluff in the connector port can prevent proper contact with the connectors used to transfer data. An air duster or thin piece of card or plastic can be used to tease out debris if that is the problem.
tt2

Can you rename backed up files on time capsule?

Can you rename backed up file on time capsule?

You can rename the sparsebundle file that Time Machine has used for the backups of a Mac on a Time Capsule.....if that is what you are asking......just like you can rename any file on a Mac.

In an interactive report, after going to 5th list, can you come back to 2nd

Hi guys,
I am having a simple doubt, can you clarify me.
In an interactive report, after going to 5th list, can you come back to 2nd list? how?

HI,
Write this under at line selection.
Atline-selection
case sy-lsind .
when 1 .
when 2 .
when 3 .
when 4 .
when 5.
sy-lsind = 2 .
when 12 .
when 13.
endcase .
Thanks
Mahesh

Can you change back to a different plan

If you change to a new plan and decide you do not like it, are you locked in for a specific period of time or can you switch back at any time?
Thanks,
Rob

You can change your rate plan to whatever you would like at any time. Keep in mind that if you are going to a lower plan it can either be started on the day you request the change (you will get pro rating on your minutes that may cause you to get minute overage) or the best time to start the new plan is the beginning of your next billing cycle. If you are increasing your minutes, you can backdate the change to the beginning of your bill cycle, start the change the same day you requested your plan change or future date to the beginning of the next bill cycle.

Can you go back to lion if you have already gone to Mountain Lion? I wish I had the old OS back.

Can you go back to lion if you have already gone to Mountain Lion? I wish I had the old OS back.

Try this:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

When a TC is full can you piggy back a second one? If so how?

When a TC is full can you piggy back a second one? If so how?

No you cannot piggy back. You can offload the existing sparse bundles and start again. The easiest way is just to archive the existing TC hard disk to equivalent size USB directly from airport utility. Then erase the drive and start afresh.
But there is no way for the TM to spill over and start using another disk as if there was just one TC. And buying another TC would be a real waste unless your current one is old and too small. Just use USB hard disk plugged into the TC.

HT201250 How can you just back up photos. 2000 of them

How can you just back up photos with Time Machine. 2000 of them

peterz911 wrote:
I am a photographer and trying to backup my photos. I would be using Seagate Backup Plus USB 3.0 , 1TB.
I am very computer illeriate so please dumb it down so I understand.
Hook up the Seagate drive (don't use their software) to the Mac and a TimeMachine window should appear, click yes and let it work for hours until completed. Hook up occassionally and it will backup your entire boot drive.
If you need to format the drive, open Disk Utiltiy in your Applications > Utilities folder, click on your new drive on the left and Partition, 1, Option GUID and OS X Extended Journaled as the format and click apply.
You should get another external drive, this will be your storage drive for a duplicate of all your photo's.
Connect it to the Mac, format it the same way as above, then you need to drag and drop your photo's to it.
If your photo's are in iPhoto, then inside your Pictures folder is a iPhoto Library, drag and drop it onto the icon of the external storage drive every time you want to make a backup.
The first time you drag and drop, it will copy it.
The next time you do it, it will ask if you want to replace the iPhoto Library with the new one.
If your sure you want to do this, then say YES.
If you want to make multiple dated backups of the iPhoto Library, double click on the external hard drive icon and it will open into a window.
Use the Finder > New Folder and you can click on the name and change the type to date, then drag the more recent copy of iPhoto Library to that folder.
This way you can have more than one copy of the iPhoto Library on the external storage drive at the same time as they are in folders. This way you can create a archive of dated photo's.
Good Luck, and take a class or have someone teach you about basic OS X user interface.

How long can you revert back to the original photo after cropping?

Is there any time limit for how long can you revert back to the original photo after cropping? Are you always able to revert back?
Thanks.

DAM = "Digital Asset Manager", a fancy name for a filing system.
iPhoto keeps the original and makes one (usually much smaller) copy based on your edits. It is non-destructive in that if you crop, and later change the color, iPhoto will go back to the original and apply the corrections to get the new image, it will not simply modify the preview.
If you want a high quality copy of the image, use the export function which allows you to specify the size and compression.

Just purchased a new iMac running 10.9.5, needing a version of illustrator. Do I go with CS6 hard copy or down load or CC? I have 17 years of illustrator files some il 7 some CS. Can you save back to Legacy with CC?

Just purchased a new iMac running 10.9.5, needing a version of illustrator. Do I go with CS6 hard copy or down load or CC? I have 17 years of illustrator files some il 7 some CS. Can you save back to Legacy with CC?

Really need to be able to save back to the older versions, in order to output vector files on an older plotter. Running an older application of Mac sign from Softeam, can't get in touch with them. Total pain to upgrade, been dumbing down for too many years.

2.3.340 Problems, can you go back to 2.3.15?

Similar Messages

Maybe you are looking for