2.3 update on x10 keeps failing to install???

Trying to update my phone to 2.3 and keep getting installation error saying unable to install or start phone software update components. the phone has been restarted, the pc been too, backup is done. Please could someone answer this, before I put my head through the brick wall i'm banging my head against!!!

try Update Service instead
turn off your firewall and antivirus
or
reboot your PC on safemode then run Update Service
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

HT201366 Security Update 2013-003 keeps failing to install - 'Unexpected Error occurred' - and now my MacBook Pro is running extremely slowly?

I have repeatedly tried to update the software 'Security Update 2013-003' on my MacBook Pro OS X Version 10.7.5 but it keeps failing to install, stating that 'an Unexpected Error Occurred'.
Since the update failed the first time, my MacBook Pro has been running extremely slowly and failing to open basic apps like Mail and Safari at times.
All other updates have been successful apart from this one. I have made sure that my MacBook isn't full (emptied Trash etc) but it still runs really slowly at times so I think it's linked with the Security Update failure.
Please help!
*I have tried installing the update from Support Downloads but it says there isn't space on Macintosh to install it. There is 190 GB of free space on that disk so I don't understand that at all.
LION system.

I have tried and it downloads successfully but when I install it, it comes up with this:

I've just installed OS X to my old iMac. I'm trying to run a software update and it keeps failing mid update. any suggestions

I've just installed OS X to my old iMac, (early 08). I'm trying to run a software update and it keeps failing mid update. Message is that internet connection may have failed, retry.
I've tried several times and get the same error message.
any suggestions?

If you are connected via wifi is connecting via ethernet cable an option - at least just while you try to do the update?

IMovie 10.0.2 keeps failing during install

I have been trying to update iMovie but it keeps failing during install. It gets nearly to the end, then I get the error "Cannot install Titles". I see in the reviews that this is happening to many people.
I am running Mac OS 10.9.1. I can't run iMovie because it says it is being updated. I can't update, so iMovie is trashed. All because I followed Apple's directions.
What's the fix?

Best to reinstal iMovie 10. It will already be version 10.0.2. details on reinstalling from App Store here:
http://macs.about.com/od/usingyourmac/qt/How-To-Re-Download-Apps-From-The-Mac-Ap p-Store.htm
Geoff.

Windows 8.1 update with KB2919355 keeps failing

hi,
I'm trying to get my Windows 8.1 updated with KB 2919355 but it keeps failing with error code E0000100.
I've tried tried to resolve using the "clearcompressionflag" tool, but that had no effect. The update will install but after reboot of machine, the update fails.
I'm running 64 bit and the pc is upgraded from Win 7 then Win 8 and finallly Win 8.1.
Please help.
Thanks
Marc

WindowsUpdate.log is here:
Aha. I think we are going to need a previous piece of the CBS.log. This KB2919355 is so huge that it seems to have wrapped the one that you are showing us. I.e. I suspect the most interesting piece of it will reflect what happened to produce
this event (or an earlier one of the same code 0xE0000100)
2014-08-12 16:55:42:109 1060 f54 Report REPORT EVENT: {AF27B9C6-D4EB-4CB5-86C3-1779B31F5941} 2014-08-12 16:53:00:527+0200 1 195 [AU_SCHEDULED_INSTALL_FAILED] 101 {26E2A7EE-34D5-4161-AB79-56625337046F} 207 e0000100 AutomaticUpdates Failure Content Install Installation Failure: Windows failed to install the following update with error 0xe0000100: Windows 8.1 Update for x64-based Systems (KB2919355).
2014-08-12 16:55:42:139 1060 f54 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2014-08-12 16:55:42:329 1060 f54 Report WER Report sent: 7.9.9600.17092 0xe0000100(0) 26E2A7EE-34D5-4161-AB79-56625337046F Install 101 Unmanaged
2014-08-12 16:55:42:350 1060 f54 Report CWERReporter finishing event handling. (00000000)
2014-08-12 16:55:56:986 1060 ae4 Driver Matched driver to device PCI\VEN_1002&DEV_9640&SUBSYS_77481462&REV_00
2014-08-12 16:55:57:001 1060 ae4 Driver Status: 0x180200a, ProblemNumber: 00000000
Unless that driver information is enough of a clue to help you devise a workaround? What is that device? You could use WMIC (or Powershell) to find out more.
E.g. try
wmic Path CIM_SystemDevice where (__RelPath like "%Ven_10%") get PartComponent
I'm sure we could find something more specific but that gives you an idea I hope.
You can do a Find in your WindowsUpdate.log for Installation Failure: to see that there is a definite pattern to the failure reports: 4 install errors and 1 download failure then 1 install error and 1 download failure.
So I suspect that the last ones, for the download failure, or even the quick install error is not going to be as interesting as the first of a set of 4. E.g. those later ones may just be the server throwing up its hands and saying: Go
away! (figuratively speaking, of course.)
Of course I may be completely off the mark here with such speculation, so you may prefer to leave it to Darrell to choose what he wants to look at. Thanks for both diagnostics. I think they will help.
Robert Aldwinckle

Creative Cloud desktop update keeps failed to install

I try to update the creative cloud desktop but, it keep failed to in still

Tried all solutions referred here and in other threads: (1) downloading tne installer from CC download area, (2) changing the name of given folders, (3) uninstalling CC desktop, (4) removing residual data with CC cleaner tool, and (5) changing user privileges in Application support folder.
None worked.
I also analysed the error log. It shows the error "DW040", which only reference in knowledge base points to an issue with third-part programming to CS. After using the Cleaner tool, I found another log reporting "AAM installation ended with return code 251", but again the knowledge base knows nothing about it.
So we are going to the sixth day of problem without a solution. I cannot install other apps from my subscription without CC desktop app, although I am paying the whole price (just installed PS, MU and ID). Adobe is forcing me to lost several hours just trying solutions –and the same is going with many other users – besides not being able to use what I paid for.
I would expect a new CC desktop version to address these issues, but even this is quite uncertain. After searching in forum and knowledge base, I found several references to similar installation errors with CS6. Since then, Adobe not only was unable to fix this issue but also released a new package (CC) with tons of marketing investment but without equivalent attention to user support and app testing.
Very very frustrating.

CS6 will not update for CC, all other programs have updated but CS6 keeps failing

I have updated via help in CS6 and all programs have updated for creative cloud, however CS6 keeps failing.
It is my original packaged version however I have subscribed to CC so as to maintain updates.
Can you advise please.

Run the Creative Suite Cleaner Tool, let AAM reinstall, try again.
Mylenium

Folio 9480m Windows 10 Keeps Failing to Install FAILED THROUGH WINDOWS UPDATE

Ive tried many many times to get this to work and dont know what to do, is there specific secuirity settuing with my folio 9480m that i need to disable before trying to update? it gets to a point where it says the drive isnt unlocked or something alike that. then back to windows 7 just keeps failing at windows update straight from microsoft trying to get upgraded to windows 10 technical preview

if u have updates that wont go away and every time windows fails they pop back up, right click and hide them before next attempt at windows 10 installation (it is most likely what gives the error and most likely is a driver issue)

Windows Update keeps failing to install 4 recommended KB;s

I have tried 6 times to get these updates to install: KB2515325,KB2522422,KB2492386,KB982018. every time Windows Update says it failed to install them. 2 other Updates KB2310138 and KB2467173 installed succesfully. How do i install/stop these updates as
everytime i reboot i get asked to install them again.
My System specs.
Windows 7 Ultimate
Q9650 cpu
2x 500Gb HDD's (SATA-AHCI)
Powercolor 4870 1GB
8Gb DDR2 1066
cheers
Who cares who wins

Seriously Microsoft?
Here's the thing, I received a call from my dear mom about this issue. She's not computer expert and never will be. She has no idea how to turn anything off from computer. But she's annoyed that she has to start up computer every
single time now twice because some one of Q&A fucked up. Your given solution is Invalid! Please come to solution what even 50 year old can do with out some sort understanding how to go ms config and disable startup programs and
run disk checks.
This update confusion makes me want go and buy my mom Apple, and then you guys have meetings on MS wondering why apple does so good. This is the reason. Everyone aren't computer wizards and rather overpay things on first day than pay
to some long haired WoW player every single time when MS Q&A fuck's up. This is second time in 30 days when I have to travel to my moms house ( 140 miles ) fix something what you guys fucked up.
Next time I send you a bill and you can debate abut it in EU highest court.
Wow, that's pretty harsh, Taavi. You seem to have a pretty narrow-minded idea of how many
hundred of thousands of different configurations Microsoft has to support with a single, unified update system. Go get your mom an Apple - see how that works out for you. Something tells me you haven't
bitched or moaned about the hundreds of other updates that DID seamlessly, automatically and silently install - but now you're all venom and hate towards Microsoft for missing a small detail somewhere in in a massive list of possible configurations.
You might try using RDP or some other readily available tool to allow remote access to the box without having to drive 140 miles to dear mom's house. That's how I take care of my parent's machines, and it's worked well for me. Then again, I like
seeing my parents - any chance I get, and I generally get a home cooked meal out of the deal.
If you can stop acting like a douche bag long enough to actually try and troubleshoot the problem, you likely would have figured out of to solve this issue yourself. You're one of those kinds of people who LOVE to Bandwagon-bash Microsoft
when it's convenient for you, but the rest of the time you silently LOVE to use their products.
Whatever you do, don't give Microsoft any credit for their successes - that bitter pill just might drive you over the edge.
Flames aside, here's what I did to get these particular updates to install. It seems that KB2515325 is the hinge that's making or breaking these installs from working one-after-another. I installed all the updates I could, did a reboot, and was
left with the 4 KB's mentioned. I didn't download the standalone updates, either - I used Windows Update. Here's what I did to get them all to install on my 64-Bit system:
Install KB2492386 by itself - unselect all other updates
Reboot
Install KB2515325 by itself - unselect all other updates
Reboot
Install KB2522422 by itself - unselect all other updates. I was not asked to reboot after this update.
Check for updates again, and you should only have KB982018 left. Install KB982018.
Reboot one last time, then everything will hopefully have taken.
If that works for you, Taavi, be sure and give me your address so I can send
you a bill for providing you step-by-step instructions.
SonarTech

ITunes 10.5 keeps failing to install - missing components

Hi, I'm really hoping someone can help me - I went to upgrade to 10.5 (64-bit). Initially I was told that it failed to install properly and I would have to manually install the different components (yeah I'm a tech-moron), which I tried to. But they kept failing to install.
So I uninstalled iTunes. And I then re-installed. But this is now now working.
I keep getting a dialogue box telling me that "iTunes was not installed correctly. Please reinstall iTunes, Error 7 (windows error 126)" or words to that effect.
Does anyone have any ideas as to what I can do. This is especially urgent for me as my 4S is in the post! And yeah, like I said I'm a moron about stuff like this so step-by-step assistance would be really appreciated. Thanks!

After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much!

My flash player quit and keeps failing to install... need help please!

Hi. I am not able to install my flash player. I went thru the troubleshooting tips on adobe.com/go/tn/19166, but still keep getting the message *Failed to install* . I don't know what to do now. I called phone support and they sent me here! Can anyone guide me?? Thanks!!

First let's try to see if Flash Player is correctly installed.
When you go to this site http://www.adobe.com/software/flash/about/ - can you see the Flash animation? What version of Flash Player does it show?
Also, what version of Internet Explorer are you using?

Photoshop CC 2015 Keeps Failing to Install: Problem With a Patch

Hi all,
I tried to install Photoshop. I got pretty far but then the installing stopped and bright orange letters popped up saying Installation Failed or something similar to that. I clicked on the Learn More link next to the message.
It said there was a problem with one of the patches, so it failed to install. It told me to re-try in a few minutes.
A few minutes later, I re-tried it and now it says Update Failed - Learn More. I kept re-trying and it ends up doing the same thing over and over.
It told me to contact customer support.
..so here I am.
How do I fix this?
Thanks

Benh89930539 I would recommend reviewing the installation log files for update which is failing to apply. You can find details on how to locate and interpret the installation log files at Troubleshoot install issues with log files | CC. You are welcome to post any specific errors located to this discussion.

Geolocation update returns an error: "Failed to install Geolocation Update. Please contact Sourcefire support."

An attempt to install a version of the Geolocation Database (GeoDB) that is already installed returns the following error:
Failed to install Geolocation Update. Please contact Sourcefire support.

This issue is fixed in Sourcefire software version 5.3. If you are experiencing this issue, please update the software version of your Sourcefire appliances to 5.3 or greater to resolve this issue.

Update 9.1.3 failed to install

Hi all,
First time on this site so i hope ive done this right.
Ive downloaded the latest update but when i try to install it i get a message almost stright away saying CPSID_49522 failed to install.
What am i doing wrong?
Regards

Here's the trick. first you must download 9,1,1 then update to 9.1.2 then update to 9.1.3. Then you still must go into explorer and find acrdr 9,0 (I think that's the name of the file) and manually remove it. If you go to secunia.com and download their free personal security advisor it explains it in greater detail, plus it's one of the best utilities on the web and did I mention, it's free? I promise this will work.

System Update 5.0.2 fails to install on Windows 8.1 Preview

I am trying to install System Update 5.0.2 on a W520 running a fresh install on Windows 8.1 Preview. Solution Center is already installed. No other software has been installed on this box, other than standard windows updates.
When I try to install SU5.0.2, I can get to the EULA screen, click on the "I accept ..." toggle, Next button enables, but does nothing when I click it.
Any suggestions on how to SU5.0.2 to complete?
Thanks.
Tom
Here are the last lines in the tvsuSetup.log file after I try to press next, but before I cancel the install.
Action ended 10:23:37: CostFinalize. Return value 1.
MSI (c) (9C:3C) [10:23:37:709]: Doing action: MigrateFeatureStates
Action 10:23:37: MigrateFeatureStates. Migrating feature states from related applications
Action start 10:23:37: MigrateFeatureStates.
Action ended 10:23:37: MigrateFeatureStates. Return value 0.
MSI (c) (9C:3C) [10:23:37:709]: Skipping action: PatchWelcome (condition is false)
MSI (c) (9C:3C) [10:23:37:709]: Doing action: InstallWelcome
Action 10:23:37: InstallWelcome.
Action start 10:23:37: InstallWelcome.
MSI (c) (9C:3C) [10:23:37:709]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'InstallWelcome'
Solved!
Go to Solution.

So first of all you solution.
open Command Controll (CMD) (i would recommend in administator mode)
navigate to the folder where you saved your "systemupdate.exe"
type systemupdate502-06-26-2013.exe /s /a /v"/qn"
(this will install System Update silent. For more inforamtion about that you should visit the microsoft support)
Now wait a bit (depends on how fast your maschine is)
Now open Metro, press this new little "down arow" and there you must find your installed systemupdate
So and now a few words more:
I had this same Problem on a Leaked Final Windows 8.1 version. This means when in October Win8.1 will offical realease, Systemupdate will not work. I think lenovo should go back to his roots and provide the best support they could instead of blocking all work to Windwos 8.1 Threads. I know many people that buy your Laptops only because of the good support.

2.3 update on x10 keeps failing to install???

Similar Messages

Maybe you are looking for