2.4 firmware released for appletv

get it now while it's hot !
gesture support which is used along with the new version of the iphone "remote" application.
keep an eye on this doc which will eventually include what is in 2.4
http://support.apple.com/kb/HT3187

After updating, my slideshows that i have worked so hard to perfect no longer play music (that i have specifically assigned using iphoto).
The only way to get ANY music is to go into settings under photos in apple tv. but this ***** because you can't assign a particular song to the slideshow from the apple tv. you can only pick a playlist of songs and that same playlist plays for every slideshow!
Can someone confirm this? How how about those of you that have updated to the iLife 09? I still have the old version of iphoto
Is so, i am sooo bummed. One of the best things about apple tv in my opinion is the ability to play slideshows with specific music assigned for that particular slideshow on my big screen tv. everything from my daughter's newborn baby pictures to trip to the beach were assigned appropriate music.

Similar Messages

When was the 1.13 firmware released for new iPhones?

Hi, I just want to know when the 1.13 firmware was released for new iPhones from apple.com?
My family have order 2 new iPhones recently (separate orders) and I want to know if it will be on the latest firmware or if I’ll need to update it for them?
Thanks.
Smiths.

1.1.3 was released yesterday. When you setup and sync your phone if the software is not up to date, you will be able to do it at that time.

V35 firmware release for N82 product code 0561049

When will this firmware be available?

nikhiltalati wrote:
When will the new firmware be available?
http://europe.nokia.com/support/download-software/device-software-update/can-i-update
If you want to thank someone, just click on the blue star at the bottom of their post

Will Nokia Release any Firmware Update for "E66 R...

I'm using nokia E66 RM-343 , which is running the firmware version 510.21.009.
I know , nokia dropped support for symbian platform and currently working on wp8.
Will there any new firmware release for E66 ?
Thankx in advnc.
{ ¥-€-@-h }
Solved!
Go to Solution.

K...But the real prblm is, my phones previous firmware version was 410.xx.xx. And i updated it to current available ver 510.21.009.
After update , i noticed some prblmz, camera settings restore each time when using camera,
And also the main thing is the GPS. My GPS worked fine with firmware ver 410.xx.xxx . Before location lock within 30 sec or even less than a minute, but after update it struggles to get a fix on location even after 20 min. I used ovi maps, google maps, but it does not giving me the correct location. I hope if i can downgrade to previous ver , what can i do ??
Thanx.
With regards
{ ¥-€-@-h }

E71 firmware upgrade for A1 network - Nokia unable...

Hi,
Nokia, please make firmware v210 available to product code 0570359.
i have an E71, use it heavily in business and have standardized our company on it and need to upgrade it to v210 firmware, because the v100 is so buggy. i had 7 email interactions with nokia support and a1 support but both point the finger to each other and are of no help. so the last option is to use the forum, before i feel forced to switch my company over to the iPhone because of lack of nokia software support and upgrades.
the network provider A1.net says they have accepted firmware 200.21.118 already last year and informed Nokia in December 2008 to release v200 for this product code 0570359. A1 even says they have reconfirmed now again that the acceptance of the firmware has reached nokias support team. but when I check the nokia updater and the nokia website, it still says my firmware v100 is the latest. I know that even firmware v210 exists, know the list of fixed issues, so I actually want that one.
Is there anyone out there to help with this mess and help nokia from loosing even more business users over to the iPhone?
Bernd G.

first of all, it isnt Nokias fault. once firmware is released, they do their very best to roll it out and usually achieve this in a few eeks to most regions for their generic product codes (i.e. firmware that is not operator-branded). in your case, there is some kind of miscommunication between your operator (A1) and Nokia, that has resulted in the delay of firmware released for your particular product code. Nokia simply provide the firmware to A1, who then decide whether to actually release it or not with their logos and whatnot all over it (i.e. operator customisation) or if they do not, they will not release the firmware to the users. so all you can do is haggle A1 about it and hope they hurry up and release the firmware.
another option is to ask the A1 guys to sign a release so that you can take your phone to your local Nokia Care Centre and have it flashed with generic firmware. although this is often unlikely to happen as customer service for operators usually do not know what users are talking about when you request this, or are too stubborn/lazy to allow it to happen. but nevertheless, you can try anyway and maybe something good can come out of all this.
If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

N91 RM-43 4GB New Firmware Release Date!

To:
- Nokia Moderator
- Firmware Teams
- Support Discussions Users
1. When will there be a New Nokia Firmware Release for the Nokia N91 4GB Edition?
2. Is v3.00.060 RM-43 8GB Firmware Compatible with N91 RM-43 4GB Edition?
Thank-You
If you find my post useful then click on
Kudos!Nokia N96 (v20.050 / RM-247)
www.shaysoft.net | Competitions!

Hi Shayesta
Unfortunately the Moderators and administrators will not have this information available to us. This is a user to user support forum, therefore you will not receive direct feedback from Nokia through this channel.
However, one of our many users may answer your query if they have information them selves. Alternatively you can contact your local Nokia support team if you wish a direct answer form Nokia.
Regards
Mohjo

Firmware updates for slightly older routers

I bought my WRT610N ver1 only about 3 years ago, and apparently you've already obsolecesed it, as the latest firmware for it is from July 2010. this is not the first time I've experienced linksys/cisco support disappearance, i previouisly owned a WRT54GS and a WMP54GS, both of which I only owned for a year and a half before support was dropped. this situation is getting quite annoying, and from what is supposed to be one of the best networking companies out there, it's absolutely ridiculous. if you're looking to lose customers, then this is the right way to go, but if not, you need to change this **bleep** attitude toward your long term users.

There is new firmware release for the WRT160N ver1 which is released on Nov, 08 2010 .
Check this on the Linksys website .
What is the current firmware version on your WRT160N router ?
Download the latest firmware from the Linksys website and upgrade the firmware of your router .

Ideas for AppleTV firmware?

I was wondering if there was anywhere we can submit ideas for AppleTV firmware. I have digitized my large DVD/Blu-ray collection for esier viewing on all our TV's and I was looking for more filter options (Like by Rating). I was also looking for a quick scroll option (like the ipod does when you scroll through your music). And even a search functoin for your movie/TV shows for your itunes library. Now if I'm missing a setting somewhere then that will clear this all up.
Thanks for your help.

As much as I would love it if the Apple TV was to have a Blu-Ray player, that will never happen. That is not what Apple is trying to do with this product. If you also look at the direction they are going, it would seem that Apple thinks everyone can do away with all types of media and just go strictly wireless and buy everything through iTunes. This is a real shame. It would appear that Apple just doesn't understand that most people, such as myself, do not want to be pushed into something they don't want. If the Apple TV had a blu-ray drive it would be the only thing I needed for my media center. Since it doesn't I have to either buy one or get something that already has it such as a PS3.

Suggestion for next/last firmware release of WRVS4400N v2

Since this router already set up for IPv6 and Dual-Stack traffic, would it be possible to give it the ability to get its IPv6 prefix from the WAN side of the router.
Example:
I have Comcast, and as long as my modem and router support IPv6, with the router also supporting DHCPv6-PD to get the /64 prefix from comcast.
I now have an RV180W so this is not an issue for me, but my father is inheriting the WRVS4400N from me and he is also on Comcast.
Thanks
Robert Hessenauer

Hello Mr. Hessenauer,
On this case I recommend you to install the latest firmware available for this device (2.0.1.3)
Let me send you the link from the cisco site where you could download it.
http://www.cisco.com/cisco/software/release.html?mdfid=282414016&softwareid=282487380&release=2.0.1.3&relind=available&rellifecycle=&reltype=latest
If this answer was satisfactory for you, please mark the question as Answered.
Diego Rodriguez
Cisco network engineer
Thank you

New Firmware (v2.2.0.7) Released for SA520 SA520W SA540 SA500 Series Routers

Cisco has released new firmware for the SA500 Series routers. It's version 2.2.0.7 and can be downloaded here:
http://software.cisco.com/download/navigator.html?mdfid=282414017&i=rm
We have been running on this version on our SA540 for months. Other than some changes to logging that we don't particularly like, it has been a very stable release for us although 2.1.71 was extremely stable in our environment as well.
Our environment:
SA540 (gateway router)
three Linksys E4200 v1 routers (configured in "bridge mode" which turns the devices into WAP's)
Netgear GS724Tv3 switch (with two ports in LACP link aggregation mode which are used by our Synology NAS)
Synology DS1812+ NAS (in link aggregation mode)
Several 5- and 9-port unmanaged switches
Several Windows machines (PC's, servers, laptops) of many flavors
Several MAC laptops of many flavors connected via wired and wireless
Several tablets (iPads, Kindles, Touchpads, Xooms, etc.) of many flavors connected via wireless
Several smartphones (iPhones, etc.) of many flavors connected via wireless
At any one time we have ~75 active devices on our network of which ~25 are wireless. Max ~100 devices.
We utilize IPS and ProtectLink. We do not take advantage the ProtectLink email protection or license the ProtectLink Endpoint functionality.
BTW, our cable modem is directly connected to our SA540. Our SA540 is directly connected to our Netgear switch. Nothing else is connected to our SA540. Our Netgear switch, and to a small part our numerous unmanaged switches, do all of the heavy lifting.
Our SA540 and Netgear switch handle all of the traffic with ease, but we are a relatively small shop.

Hi Curtis
Thanks for posting in our forum
We appreciate your comments about our products, I would add that if you want to see the release note of this new firmware release, you can see it in the following link.
http://www.cisco.com/en/US/docs/security/multi_function_security/multi_function_security_appliance/sa_500/release/sa500_rn_2-2-0-7.pdf
You can also be interested to see our new security devices , the “ISA500” series.
http://www.cisco.com/en/US/partner/prod/collateral/vpndevc/ps11850/ps11752/data_sheet_c78-717565.html
Greetings
Johnnatan Rodríguez Miranda
Cisco Network Support Engineer

Apple pls look here: Some "quick wins" for the next firmware release

Hi!
First of all: Thank you, Apple, for Update 1.0.3! The most annoying bugs are fixed and the click wheel works better (but in my opinion the quick wheel of the iPod nano works still even better).
Please allow me to suggest a few "quick wins" you could easily (in my opinion) include in the next firmware release:
+ Please add an option to turn off that "screensaver" or to change the time until it turns on
The "screensaver" wouldn't be that bad when:
+ It would display "now playing" information in a large font (better readable than the normal "now playing" when the background light is off
+ The screensaver clock would display 24h format, when configured
Best regards, Jens

It's a waste of time posting this here because it's a user to user forum and no-one from Apple (except maybe the forum moderators) will see it.
Please use this link.
iPod Feedback.

When will firmware ver. 20 for N97 be released for...

It has been a while that firmware ver. 20 is released for N97 all over the world. Less than 24 hours after its release for the first time, it was SUDDENLY removed (by the NOKIA staff) for some product codes such as N97s with FARSI language support (product codes: 0576556 (black), and 0576575 (white)). Till now, after several weeks, there is no sign of coming back! NSU still introduces 12.0.024 as the most up-to-date version!
Most of the N97 owners with different product codes are enjoying the new firmware all over the world, while N97 owners in Iran are still using version 12! It is not fair!!!
Would you please declare the exact time that firmware 20 will be available for such product codes?
***COME ON guys! please do your best to give it out ASAP! I formatted both of the memories of my phone after the release, and since then my phone is full of nothing!

I'm in the same boat as you OM81BA - I'm on Product Code 0576500 - KSA Black, and still I can only get v12, no sign of V20. It was only released on Oct 27th, so not 'several weeks', but it does FEEL like several weeks when it the rest world seems to have it already.
I was in a telephone conversation with MENA Customer Care yesterday, and their suggestion was to take it to a Nokia Repair Centre for the latest FW upgrade.
It's either that, or just keep waiting.......and waiting.........and waiting......... for no news / dates/ firm commitment.
Silver Nokia E72-1 UK
RM 530
FW: v31.023

New Firmware Version 1.1 released for DP-V3010 Reference Display

Free Canon Firmware Upgrade For DP-V3010 30-Inch 4K Professional Display Enables Confirmation Of ITU-R BT.2020 Color Gamut Video Content.
For more information, click here.

Hi, AlexK. I just found the answer for your question in F5/F55 user manual(v.6), on p. 46.In a word, you can't use your double speed viewfinder function.Refer to the last sentence. Viewfinder Double Speed function is not effective on the following settings.- When System Frequency is 59.94/50.- When Recording format is SStP Sr-SQ 444 / SStP SR-SQ Lite 422 / SStP SR-SQ 422, ProRes 422, DNxHD 220x / DNxHD 145.- When "Setting" in "Slow Shutter" of the Camera menu is set to "On."- When "Setting" in "S&Q Motion" of the Camera menu is set to "On," and the "Frame Rate" setting is 1 to 60P. At this moment, it's not available to everyone.Hope Sony make it available with future firmware update, if technically possible. Bryan

Firmware upgrade for WRT54G v7

is there no firmware upgrade for WRT54G v7? i didn't even find version7 as listed in linksys page for routers....

Click on Download and save the file on your Desktop..
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...In the address bar type - 192.168.1.1...Leave the Username blank & in Password use dmin in lower case...Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab-Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...Wait for few seconds until it shows that "Upgrade is successful" After the firmware
upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

Firmware upgrade for Westell UltraLine Series3 A90-9100EM15-10 ?

I'm wanting to check for/download install a firmware upgrade for my Westell UltraLine Series3 A90-9100EM15-10.
It's currently running
Software Version: 1.02.00.04
Release Date: Aug 28 2008
I'm hoping there's an upgrade available that fixes the HDMI Handshake/dropout problem?
Anyway, the screen I'm taken to after clicking "upgrade" in the router's management UI says :
Check every xx hours at URL _______
The field after "at URL" is not populated.
If I click "check now" I get:
"URL must be in the format: protocol://userassword@hostort/path where protocol is one of http, https, ftp or tftp. Either user or password, or both, may be left out. The port number is also optional."
Was that URL field supposed to be populated by the tech who installed the FIOS?
Where can I find that URL so I can paste it in and get my firmware updates?

Nevermind. I've found it. The link to 1.03.00.08 firmware is http://download.verizon.net/webdownload/firmware/upgrades/westell_router_9100em/A90-9100EM15-10-1.03...

2.4 firmware released for appletv

Similar Messages

Maybe you are looking for