2.4GHz RFID Tags for Cisco WCS and Location Appliance

hi,
someone knows a company that produce small 2,4Ghz active rfid tags that i can include in my wlan network?
i'm running WCS, Location Appliance and WLC 4404 and 4402
thx

aeroscout, pango and wherenet are cisco partners. see http://www.cisco.com/en/US/products/ps6386/products_qanda_item0900aecd8029371a.shtml

Similar Messages

  • I have two facetime users, both connecting to our enterprise wireless network (Cisco WCS) and they can't make a facetime connection from IPAD to IPAD.  Are there any apple protocols or other settings that need to be enabled on WCS?  No firewall involved.

    I have two facetime users, both connecting to our enterprise wireless network (Cisco WCS) and they can't make a facetime connection from IPAD to IPAD.  Are there any apple protocols or other settings that need to be enabled on WCS?  There is no firewall inbetween the two connections, as this is all on our internal network. 
    Both devices can connect to the network, but when they try to talk to each other they can't make the connection.
    Thanks.

    If anyone ever comes across this and has the same issue, here's what I did to fix it:
    My Linksys router has a Network Mode setting, and I had to change it from "Mixed" to "Wireless-G only".  (I would've used N but one of the NICs in my house is too old to support it.)  Anyway, after making this change, Facetime works fine on the phone.  Hope this helps someone else!

  • Vsphere/ESXi 5.0 update 2 iso for Cisco Blade and Rackmount Servers.

    Hello Team,
    Can someone provide me details of Vsphere/ESXi 5.0 update 2  iso for Cisco Blade and Rackmount Servers.
    I tried to find it on both Cisco and Vmware websites but without success.
    It would be good if you can please share the links.
    Regards
    Deepak Jha
    +91-9873005405

    Deepak,
    From Padma's link, I found 5.0 U1, and found U2 here:
    https://my.vmware.com/web/vmware/info/slug/datacenter_cloud_infrastructure/vmware_vsphere_hypervisor_esxi/5_0#product_downloads
    I want to say, that U2 is not the customized image though
    -Kenny

  • Can anyone recommend a good document for Cisco IDS and AAA

    I need some basic tutorial for Cisco IDS and AAA. can anyone recommend any document for it?
    thanks

    The Cisco IDS/IPS senors do not perform any AAA functions. You can not validate a user/password externally.

  • How we archieve configuration for Cisco ASA 5500 series appliances

    Hi,
    We need to archieve configuration for Cisco ASA 5500 series appliances.
    We have Cisco works LMS 3.0.1.
    Device package installed is 4.2
    Any help would be appricated.
    Thanks in advance.
    Samir

    Hi ,
    Thanks for your answer.
    Right now we are using TACAS to login in to the ASA. That means we need single username and password to login via
    Cisoworks. Am I correct ?
    Waiting for your reply.
    thanks,
    Samir

  • HA for Cisco IDS/IPS 42xx appliances

    Can anyone refer me to documentation on the Cisco site that talks about high-availability options and configuration examples for Cisco IDS/IPS 42xx appliances? Thank you in advance.

    I am also interested in understanding the high availability options.
    I found the following in the IPS V5 datasheet:
    Auto and manual sensor bypass configuration-High availability can be achieved through numerous mechanisms for Cisco IPS sensors. Resiliency and redundancy can be delivered through unique network collaboration, for example, hot Standby Router Protocol (HSRP) configuration and Cisco EtherChannel® load balancing on Cisco Catalyst switches to divert traffic to a secondary IPS device upon the failure of a primary device.
    I would like to have more info about how to divert traffic to a secondary IPS device; info about HSRP and EtherChannel load balancing as it relates to IPS. Is this HA option only available in bypass mode? Thanks.

  • Live meeting - After click Join the Meeting, it prompted for MeetingID, Entry and Location are blank, need to key in information manually

    Live meeting issue:
    After click Join the Meeting, it prompted for MeetingID, Entry and Location are blank, need to key in information manually
    1. It seems OK on Live meeting client settings.
    2. Then uninstall and reinstall live meeting client and addons. live meeting version now is 8.0.6362.41
    3.can schedule live meeting success.
    but issue persists.

    Live meeting issue:
    After click Join the Meeting, it prompted for MeetingID, Entry and Location are blank, need to key in information manually
    1. It seems OK on Live meeting client settings.
    2. Then uninstall and reinstall live meeting client and addons. live meeting version now is 8.0.6362.41
    3.can schedule live meeting success.
    but issue persists.

  • Fetching Alert for Particular Product and Location

    Hello,
    This is on ABAP side..
    I just wanted to know whether its possible to fetch alerts for Pariticular material and Location.
    I checked the method Read_alerts in Class /sapapo/alert_manager, but its not working. Any suggestion on this are welcome.
    Please do suggest..
    Thanks in Advance,
    Srini

    Did you try using BAPIs BAPI_SYSTEM_ALERT_GETDETAILS ?

  • Cisco WCS and VMware

    I need to update my WCS server running VMware to the following:
    Cisco WCS can be run on VMware ESX Server 3.0.1 or later. The minimum hardware requirements for a dedicated and guaranteed VMware server are Intel? Xeon Quad CPU; 3.15 GHz, 8 GB RAM, 200 GB HDD.
    I would like to know is this only for the virtual server or must it be done on the host for complete Cisco support?
    Thx

    Hi,
    Here is it running on VMWare 3.01 on a quad-core Xeon with 16GB. We gave the server 2GB of memory. It uses 800Mhz CPU. We have about 60 Lwapp 1231 ap's and the wcs is a 4.0.179 version (need to upgrade ;-))

  • PoE for Cisco 1242AG and 1310G Access Points

    Dear All,
    we purchased a Cisco 1242AG and a 1310G Access Point and in the DataSheet it was specified that these APs support Power-over-Ethernet. The problem is we don't see any RJ-45 port in either AP which could be used for connecting the AP to an PoE Switch. Can you please tell us how we can connect these APs to an 802.11af compatible PowerBridge (by Intermec) ? Thanks.

    Hi Thorsten,
    The 1242 should be good to go but the 1310 is powered quite differently. Have a look;
    AP 1240 Series - Hardware (see diagram)
    http://www.cisco.com/en/US/products/ps6521/products_installation_guide_chapter09186a008079b7f4.html#wp1071972
    Connecting the Ethernet and Power Cables
    http://www.cisco.com/en/US/products/ps6521/products_installation_guide_chapter09186a008079b7f4.html#wp1052781
    1300 Series Power
    Power
    The access point/bridge receives inline power from the Cisco Aironet Power Injector (hereafter called the power injector). Dual-coax cables are used to provide Ethernet data and power from the power injector to the access point/bridge. The power injector is an external unit designed for operation in a sheltered environment, such as inside a building or vehicle. The power injector also functions as an Ethernet repeater by connecting to a Category 5 LAN backbone and using the dual-coax cable interface to the access point/bridge.
    The power injector is available in two models:
    Cisco Aironet Power Injector LR2 standard version (included with the access point/bridge)
    48-VDC input power
    Uses the 48-VDC power module (included with the access point/bridge)
    Cisco Aironet Power Injector LR2T optional transportation version
    12- to 40-VDC input power
    Note The power injector and the power module must not be placed in an outdoor unprotected environment. The power module must not be placed in a building's environmental air space, such as above a suspended ceiling.
    http://www.cisco.com/en/US/products/ps5861/products_installation_guide_chapter09186a008079b93b.html#wp1051840
    Dual coaxial cable to run from the power injector to the 1300. See attached notes:
    Cisco Aironet 1300 Series
    Cisco Aironet 1300 Series Access Point/Bridge Power Injector
    The Cisco Aironet 1300 Series Outdoor Access Point/Bridge Power Injector,converts the standard 10/100 BaseT Ethernet interface that is suitable for weather protected areas to a dual F-Type connector interface for coax cables that are more suitable for harsh outdoor environments. The Power Injector also provides power to the outdoor unit over the same cables with a power discover feature and surge protection. To support longer cable runs from your wireless network switch or router, the Power Injector LR is designed to accommodate up to a 100 meter coaxial cable run plus 100 meters of indoor cat5 cable?enabling total cable runs up to 200 meters. The Cisco Aironet 1300 Series Outdoor Access Point/Bridge ships with the Power Injector LR2 and an AC power supply.
    From this link:
    http://www.cisco.com/en/US/products/ps5861/products_data_sheet09186a008022551d.html
    Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide
    Ethernet Ports
    The access point/bridge dual-coax Ethernet ports consists of a pair of 75-ohm F-type connectors, linking the unit to your 100BASE-T Ethernet LAN through the power injector. The dual-coax cables are used to send and receive Ethernet data and to supply inline 48-VDC power from the power injector to the access point/bridge.
    From this link:
    http://www.cisco.com/en/US/products/ps5861/products_installation_guide_book09186a00804d3095.html
    AIR-PWRINJ-BLR2
    F-Type Connectors
    Dual coaxial cable carries full-duplex Ethernet, DC power, and full-duplex console port (RS-232 connection)
    From this link:
    http://www.cisco.com/en/US/products/ps5861/products_data_sheet09186a00802252e1.html
    Hope this helps!
    Rob

  • PDF PO Release - XML Tags for the Header and Line Attachments

    Hi,
    I request you to please help me in finding out the XML tags for the PDF PO Release Header and Line Attachments? I tried to get the XML data by running the 'PO Output for Communication' program with the parameter as 'Debug' but its completing normally without giving me the XML data in the log file.
    Please help me in finding the XML tags for the PDF PO Release for the Header and Line Attachments.
    Thanks,
    Kunal

    Hi Kunal,
    Following syntax will get you the header and line level short and long text attachments.
    --Header short text attachments
    <?for-each:HEADER_SHORT_TEXT_ROW?>
         <?SHORT_TEXT?>
    <?end for-each?>
    --Header long text attachments
    <?for-each:/PO_DATA/HEADER_ATTACHMENTS/LONG_TEXT?>
         <?.?>
    <?end for-each?>
    --Line short text attachments
    <?for-each:LINE_SHORT_TEXT_ROW?>
         <?SHORT_TEXT?>
    <?end for-each?>
    --Line long text attachments
    <?variable@incontext:PoLnID;'PO_LINE_ID'?><?for-each:/PO_DATA/LINE_ATTACHMENTS/ID[. =$PoLnID]?>
         <?current()[$PoLnID]/preceding-sibling::TEXT[1]?>
    <?end for-each?>
    Also note that, while running the program in Debug mode for a particular PO/Release the status should be INCOMPLETE, otherwise you won't be able to see the XML tags.
    Thanks,
    PS.
    Edited by: PS on Sep 25, 2012 6:16 AM

  • WCS & 2710 Location Appliance

    I am running version 7.0.164.0 on my WCS and have a 2700 and a 2710 Location Appliance both running version 6.0.102.0.  I used to be able track clients on the WCS maps but now I am not able to.  No clients show up on the maps anymore, just the APs and their heat maps.  I'm not sure when this started but I am guessing there is a compatability issue between the two.  Can anyone verify this?

    I am running the same versions and able to track clients. You might need to
    click on the ">" to pull up the filter for the client view and check the show all clients checkbox

  • WLC, WCS. Location Appliance upgrade order

    Folks -
    I am about to upgrade my system from 4.1 code to 4.2 code. I am wondering if it's possible to have the WCS and 2700 Location Appliance upgraded to 4.2 d-cubed revs first while still running Concannon WLC code 4.1.185? I am hoping to be able to upgrade WCS/2700 several days before doing all of my controllers.
    So in summary, will the following combo work? WCS-4.2.97, 2700-3.1.38.0, WLCs-4.1.185.

    Hi Charles,
    Yes, this would be the supported method :)
    Upgrading to a New Software Release
    The Cisco WCS release must be the same or more recent than the controller software release. **Upgrade the Cisco WCS first to prevent any unexpected problems. Cisco WCS supports database upgrades only from the following official Cisco WCS releases:
    •4.0.66.0
    •4.0.81.0
    •4.0.87.0
    •4.0.96.0
    •4.0.97.0
    •4.0.100.0
    •4.1.83.0
    •4.1.91.0
    •4.2.62.0
    •4.2.62.11
    •4.2.81.0
    Wireless LAN Controller Requirements
    Cisco WCS 4.2.97.0 supports management of the following wireless LAN controllers:
    •4.0.155
    •4.0.179.8
    •4.0.179.11
    •4.0.206.0
    •4.0.216.0
    •4.1.171.0
    •4.1.185.0
    •4.2.61.0
    •4.2.99.0
    •4.2.112.0
    •4.2.130.0
    •4.2.172.0
    http://www.cisco.com/en/US/docs/wireless/wcs/release/notes/WCS4_2MR2.html#wp69815
    Hope this helps!
    Rob

  • WLAN Controller and Location appliance graceful shutdown?

    Does anyone know if there is a supported graceful shutdown method/command for the
    4400 series WLAN Controller and 2700 Location Appliances?
    This weekend our server room will be undergoing maintenance and will experience a total power outage for a 4 hour period.  It is our intent to manually bring all equipment down (hopefully in a graceful manner) and then back up once the maintenance is completed.  As a result does anyone know if special precaution is needed to shutdown these 2 appliances, or can we simply bring down these devices hard which is the case with most other Cisco equipment?
    Thanks in advance

    Hi Mark,
    Channel 1, 6, and 11 are just about as non-overlapping as 1, 7, and 13. There's an insignificant amount of overlap, so it's just as plausible of a solution, even in Europe. I honestly don't know why you wouldn't use the extra channels to eliminate the minor overlap - every bit helps.
    The "channel blanket" or "virtual cell" WLAN design philosophy is rapidly spreading. Cisco maintains that it's a standards violation and I've heard no talk of them purchasing the not-to-be-named company or of them adopting the same design philosophy. I sincerely hope that they do one of the two soon, however, because it's very good design that's difficult for Cisco to compete against.

  • How to customize / edit wiki theme in content_entry.xsl file to display tags for blog pages and not wiki pages?

    I am trying to customize a wiki theme by displaying the "Edited Today at… by…" for only blog pages and not wiki pages. 
    I tried editing the content_entry.xsl with an xsl if tag, but failed.
    <xsl:if test="context/link='/groups/groupname/weblog/'">
      <div id="entry_date" class="entry_date">
        <a href="{../contentEntry/historyURL}" id="history_link" title="{../../jsstrings/tooltips_history_link}" onclick="return false"><xsl:value-of select="../../strings/History"/></a>
        <span id="history_time_author"><xsl:value-of select="historyTimeAuthor" disable-output-escaping="yes"/></span>
      </div>
    </xsl:if>
    What is the correct <xsl:if test=""> tag, that would execute this? 
    For <xsl:if test="context/"> I believe the content after "context/" are variables like link, baseHREF, contentEntry.  What are other variables I can use?

    I also tried it this way, but does not seem to work. 
      <xsl:if test="context/link='/groups/groupname/weblog/'">
            <xsl:template match="context/entryMeta">
                <div class="metadata" id="entry_metadata">
                    <div class="start startmetadata"><span></span></div>
                        <div class="contents contentsmetadata">
                            <div id="entry_date" class="entry_date">
                                            <a href="{../contentEntry/historyURL}" id="history_link" title="{../../jsstrings/tooltips_history_link}" onclick="return false"><xsl:value-of select="../../strings/
    History"/></a>
                                            <span id="history_time_author"><xsl:value-of select="historyTimeAuthor" disable-output-escaping="yes"/></span>
                                  </div>
                             </div>
                        <div class="end endmetadata"><span></span></div>
                   </div>
              </xsl:template>
         </xsl:if>

Maybe you are looking for

  • File to Jdbc: how to get record count from DB table

    Hello, i have a scenario file to JDBC....ihave to insert input file data to DB table. now my requirement is ..if i insert a file with 50 records to db table on first time, and then next time if i insert the file with 100 records to db table....the co

  • Calling or submiting a report program with value passed from zscreen

    Dear All, The requirement is like bellow. I have desiogned a zscrees in module pool with three fields as plant ,date and inv.date now when i clk a button present in my scren then it should go to standard transaction VF04 with value passed to the file

  • HT204022 How do you reset photo stream?

    The default setting in iphoto has pushed my entire photo library to the could. Or atleast attempted to. I stopped it before all 30k pictures were uploaded. The problem now is when I turn photo stream back on in icloud it is trying to download 4,300 p

  • Details about the PSD file of a mobile application

    I have some questions or blurry ideas about the use of photoshop to design mobile applications, in fact I have a problem to choose the resolution for the new file is what I take 72px / inch oubien 160px / inch or 240px / inch? the size of the screen

  • Framemaker12 is shutdown when I type the Korean language with keyboard.

    Please let me know the solution of  the error of FrameMaker12  what can I do ? < personal info removed by admin to reduce SPAM >