2.5 GHZ and 5GHZ Pros and Cons

What are the pros and cons of 2.5 Ghz and 5Ghz spectrum
My customer wants 1240AG and the antenna for those are either 2.5 GHz or 5GHZ and wants to know which spectrum is better for him to use
Regards
Anuj

My customer wants 1240AG and the antenna for those are either 2.5 GHz or 5GHZ and wants to know which spectrum is better for him to use
802.11b is long range, high penetration value but at a cost of low speed, amount of channels anyone can use.  The worst side of 802.11b is that some industrial applications, such as hand-held barcode scanners only talk in the low 802.11b data rates.
802.11a is short range, low penetration value and high speed with 12 channels to use.  The bad side is that not alot of applications use this bandwidth.  In Australia, for example, some expensive laptops only have 802.11b/g/n radios.  Only netbooks have 802.11a/b/g/n radios.
You want a good spectrum to use?  Use 802.11a.  But judging with the fact that you are going to use 1240, then choosing 802.11a is a moot point.

Similar Messages

  • I have Iphone 5 and mac pro, and i want to transfer pics through idrop. but my iphone not detect the mac pro. How i can turn the idrop on my computer?

    I have Iphone 5 and mac pro, and i want to transfer pics through idrop. but my iphone not detect the mac pro. How i can turn the idrop on my computer?

    The Mac Pro - the desktop computer - does not support Airdrop, if that's what you mean.
    Matt

  • How do i erase a corrupt contact list from iCloud,iPhone, iPad and MacBook Pro and restore Address Book backup to all devices and cloud?

    how do i erase a corrupt contact list from iCloud,iPhone, iPad and MacBook Pro and restore Address Book backup to all devices and cloud?
    I saved a corrected, most up to date version of my master Address Book Contacts as a back-up on my Mac Book Pro.
    then in an effort to "simplify my life"  i attempted to sync my I phone contacts - ( pre clean-up version) with my clean list on Mac Book Pro, New I pad and newly available icloud. DUH!! Using iTunes to do the sync caused the clean MacBOOK Pro list to be commingled with the dirty iphone contacts. amd now the whole mess is in the cloud. 
    I need to clear out the contaminated lists from all iplaces, and startover with Back-up on my macbook pro. BUT HOW???
    Help
    Karen

    I had exported an address book backup: abbu
    so since i wrote, i have found my way into the cloud: selected all entries - deleted them all from the cloud.
    This wiped out contacts on my iphone and i pad, and MBP, as well as on the cloud.  I then imported the abbu back into my now empty address book. 
    To repopulate the crowd, i selected all in my address book and created a single card vCard for export to my desktop.  I then dragged that vcard into my empty cloud.  Now my cloud has the same clean contacts as my MBP addressbook.  The cloud then pushed the clean contacts into my empty ipad and iphone contacts. 
    I had to go back to Address Book>preferences>Accounts and Add an I cloud account - but if you accidentally create a second i cloud account - all of a sudden your address book will duplicate itself.  I quickly reversed it by deleting one of the icloud accounts in my Address Book>preferences>Accounts. 
    I created a new entry on my MBP and it is now on all devices and in cloud
    I also created a new entry on my iPhone and it is now in the address book on my MBP.
    I feel empowered!!
    Have i missed anything??

  • Mouse 4 and marks - pros and cons with Mavericks

    Hello,
    I'm pretty new to mac but have had computers for many many years. However I've bought the latest iMac maxed out.
    Pros and cons:
    Pros: It's an Apple product. It great really and I love it. The only wonder I have is why they made the computer thinner and didn't install a true desktop graphic card in there. I guess it's because they don't want people to buy that computer instead of Mac Pro.
    Cons:
    1. I've been searching for a way for go back in a browser faster without trackpad/magicmouse. There is only thirdparty programs that I have to pay for that support Mouse 4, for example. Still don't understand why Apple have chosen not to support this. Atleast allow me to just drag the window like we do on the iPhone. Right now I have to either click the back button or right click and chose "Back".
    2. When I'm in my Videos folder or any type of folder really. Let's say I have a folder with 10 movies in it. I open one, watch it and then close the player. I then can't see which video I just watched. The only way to see this is either to remember the videoname or open all videos again until I find it. In Windows, the video/file will be marked so I know which file I just watched.
    3. iCloud service are very nice, but still a little hard to understand how it works. If I transfer all my pictures from my iPhone to my iMac using iCloud and then delete them all from my phone. Will they disappear on my Mac too? Since the systems are synced?

    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback

  • Airport, 10.5.8, and MacBook and MacBook Pros and slow internet

    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
    If you have Macbook or MacBook Pro, and have upgraded to 10.5.8, you may experience slower than normal airport connection due to a bug found in the original 10.5.8 installer. Apple has released this update for MacBooks and MacBook Pros to address the issue:
    http://support.apple.com/downloads/AirPortClient_Update_for_MacBook_and_MacBookPro
    To amend what Apple has stated, the System Profiler will indicate you have one of these three MacBook/Pro CPUs:
    o MacBook3,1
    o MacBook4,1
    o MacBookPro4,1
    If you have certain third party routers the update above will not help. In which case, it is recommended that you contact the third party router manufacturer for a firmware update, and find out also if others have your exact same router, and have found a resolution with your issue.
    Wireless issues can be caused by the following:
    1. Interference on the same wireless channel.
    2. Single channel connection from some third party routers not being strong enough to deal with interference. Apple Airport Express, Extreme, and Time capsule wireless routers all support dual channel connections, and also support networking with Windows as well as Mac.
    3. Bad router tables in your router.
    4. Power surges.
    5. Interference from microwaves, or 2.4 Ghz non-cell wireless phones, whose signal is not tempered with channel hopping.
    6. Distances less than 2 feet may have many overlapping wireless waves causing interference from the wireless router.
    7. Distances greater than 150 feet from the wireless router.
    8. Walls with numerous pipes, improper ground wiring, file cabinets with numerous papers between the computer and the router.
    9. Run the hardware test that came with your computer, it may indicate an issue on the logicboard which could also impact your wireless card.
    10. Improper security on your wireless connection. Setting up a WPA2 connection is preferred over WEP, which is preferred over no password.
    11. 802.11n is a draft standard, meaning not all routers support it the same way.
    12. Data corruption in the wireless cache settings, caused by improper system maintenance:
    http://discussions.apple.com/thread.jspa?threadID=1772235
    13. Migrating wireless settings with the Migration Assistant from a PowerPC to Intel Mac, or vice versa. It is better to follow these tips to avoid those problems:
    http://discussions.apple.com/thread.jspa?threadID=435350&tstart=0
    Not everyone will get this problem.
    14. Apple Airport and Time Capsule firmware updates can be found on:
    http://www.apple.com/downloads/macosx/apple/firmware_hardware/
    This is the 1st version of this tip. It was submitted on August 14, 2009 by a brody.
    Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

    "this tip ready for consideration"
    Please put in:
    http://discussions.apple.com/category.jspa?categoryID=140
    http://discussions.apple.com/forum.jspa?forumID=1222
    http://discussions.apple.com/category.jspa?categoryID=218
    http://discussions.apple.com/category.jspa?categoryID=190
    and any other forum or category you feel is appropriate.

  • HT5268 Just purchased Imac and Macbook pro and upgrades to Mountain Lion. Java will not run with one important site where my Grandson is in Kindergarten out of state with in room camera. What to do. This is very disappointing and non of apple geniuses kno

    My new IMac and Macbook Pro are each loaded with Mountain Lion. Have Office for Mac also
    When I try to see my Grandson on webcam out of state the login will not activate. For PC use I needed Java and Active X to let it run. My Java is checked as ready to go but nothing happens. Otherwise these are great computers. Please help me through the process. The Geniuses at my apple store can't understand what to do.
    [email protected] or [email protected]

    By default, OS X does NOT come with Java installed nowadays. You need to open the Java Preferences app found in Utilities; when you do that the first time, it will inform you of the fact and offer to install the product for you.
    Afterwards, due to a major security issue we had back in the first quarter of the year, the plugin is disabled by default. You need to revisit the Preferences and enable manually. It will auto-disable if unused in awhile.
    Lastly, you may have to adjust which Java instance is being used, the 32-bit or the 64-bit. Default is 64-bit, but some applets crash & burn or outright refuse to run in such a platform. You can prioritize which version you prefer by dragging on top in the Preferences.

  • My safari browser has been hijacked by so called in text advertising on both my iPad and MacBook Pro and I can't get rid of it.

    Both my iPad 4 and MacBook Pro are affected - if I turn off JavaScript the problem goes but then I can't access gmail etc.  I have deleted all cookies and web data and it keeps coming back. Words are highlighted green and annoying little pop up ads.  How can I get rid of this?

    Please read this whole message and be sure you understand all of it before doing anything. Back up all data before making changes to your settings.
    Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Open the DNS tab again and change the server addresses to the following:
    8.8.8.8
    8.8.4.4
    That's Google DNS. Click OK, then Apply.
    In Safari, select
    Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. If you’re using another browser, empty the cache. Test. Any difference?
    Notes:
    1. If you lose Internet access after making the above change to your network settings, delete the Google servers in the Network preference pane, then select the TCP/IP tab and click Renew DHCP Lease. That should restore the original DNS settings; otherwise restore them yourself.
    2. I’m not advocating Google or anything else as a DNS provider; the server addresses are offerred merely for testing purposes. There may be privacy and technical issues involved in using that service, which you should investigate personally before you decide whether to keep the settings. Other public DNS services exist.

  • Hello, i have MainStage 2 and Logic Pro and want to upgrade.

    Do I have to pay full price for both of them again?
    Thanks!!

    Hi
    If you want to get MainStage 3 and Logic Pro X, you have to buy them from the AppStore at full price.
    CCT

  • Auto Deploy and Kickstart - pros and cons

    I have an existing kickstart setup I am able to use for deploying a basic installation of ESXi as well as other OSes. For this, we PXE boot a server, go through a menu, and choose the appropriate option.   I'm evaluating using Auto Deploy.  Can I specify as a menu choice an option to use Auto Deploy instead of using kickstart? 
    Also,
    - will VMware be replacing kickstart as an option with Auto Deploy?
    - any advantages/disadvantages between the two methods?  From what I've seen online, they seem comparable.

    Thanks, this is helpful.  We do use Host Profiles, but we also have kickstart as our standard deployment method for physical servers, primarily for Linux, but it's also working for Windows and ESXi, too.  However, using it for ESXi means we deploy a server with a basic setup, and currently need to apply Host Profiles manually.  I'd like to use the existing kickstart infrastructure, and update the current ESXi install/upgrade choice to trigger an autodeploy of ESXi 6.0 to the hypervisor. 
    There seems to be some overlap between the two (e.g. both use TFTP and can use DHCP, and both deploy an OS onto the server, albeit with different methods).  What I specifically need here is:
    a. a way to, in the kickstart section to install ESXi 6.0, to trigger an auto deploy; I'd imagine I'd specify the auto deploy server as an option, e.g. ks= ... install=http://auto-deploy-server-ip-here/install/...
    OR
    b. a way to, in the kickstart ks.cfg configuration (in vmware's documentation, e.g. vSphere 6.0 Documentation Center, it refers to them as scripts), point to an autodeploy server to finish what kickstart starts.
    Thoughts?

  • How do I access files that I put in iCloud Drive on my iMac and MacBook Pro, and then access them with ANY iOS device?

    For example, I put some .pdf documents into iCloud Drive. Now I need those files but I'm not home any more----I have an iPhone and iPad at my disposal. They are ALL signed into the same iCloud account and they are all on the same WiFi network. Those .pdf documents that I so easily dropped into iCloud Drive earlier appear to be non-existant on my iOS devices. I do see my "Pages" memos here in iCloud, but the other things I have put in, I can't find. The ONLY way so far that I have been able to locate them is to go back to my iMac or MBP and use a Finder window and i have direct access to iCloud Drive there. Are they purposely not allowing us to pick up all files on all devices? Or am I missing something? Thanks.

    First, to access documents you must use an app designed for that specific Document type. So Pages will not be able to open PDFs. The Documents app by Readdle can handle PDFs though. In the latter case, you'd open the app, click the menu icon at its top left, and click Open to go to your iCloud Drive. With Pages, if you had files outside the main Pages folder, click + then iCloud and navigate to the file's location.
    Matt

  • After effects CS6 and premiere pro and adobe encoder crash when previewing profess 422 files, after upgrading to Mavericks

    I have tried all of the fixes and updates that adobe have to offer. They say that this is because of the change in QuickTIme that are causing the problem. Still looking for a fix. Please any help would be greatfully appreciated.

    I experienced this at one point.  Searching the WEB I saw suggestions that there was a problem with a recent version of Quicktime.  (I have no idea why the quicktime player would have an impact.)  However, reverting to an earlier version of Quicktime fixed the problem.  Search this board using quicktime as a search phase.  The quicktime web site allows you to download the earlier versions.  I'm not at my editing machine, but I believe that I am at version 7.5.2.

  • Need to buy a wireless router that is compatible with 10.4.11 and macbook pro, and pc. Current Airport Extreme not a compatible option. Please help with suggestions.

    Any mid range options would be helpful. Thank your.

    You can set up and administer the Airport Extreme from any computer, Mac or PC. The only requirement is the version of Airport Utility appropriate for the OS, in order to accomplish its initial configuration. For Tiger, it's the one I linked.
    Apparently the "chat" participant simply read from Apple's web page. Anyone can do that
    Client operating systems are meaningless to the Airport itself (or any other wireless router).
    Linksys made fine products before Cisco bought them. Cisco is focused on large corporate deployments, not small users - abandonment of the Flip is evidence of that. Their individual consumer support is horrible.

  • Panasonic AG-HPX500 workflow with FC - pros and cons?

    We are now shooting on Betacam SP, capturing to DV using a DSR-45P DVCAM deck.
    We edit in FCP 5.
    Now we are about to first upgrade our computers to MacBook Pro and Mac Pro and FCS 6.
    Next step is a new camcorder.
    We have been recommended to take a look at Panasonic AG-HPX500, which uses the P2 card.
    Have anyone of you excellent forum members started working with this camcorder?
    I understand that FCS 6 does have native support for the P2 card and if you have a MacBook Pro, you can plug the P2 card into the computer and copy the footage you want to use to a hard drive (or even edit directly on the P2 card).
    I'd be very glad if you'd share your opinions.
    We have this idea to start shooting and editing in HD and then downconvert to SD when creating the MPEG-2 for a SD DVD as output format. This would hopefully give the best quality to our MPEG-2 encoder.

    I've been using the P2 system for about 7 months and have to say it's great!
    I'm not sure what you mean about it not having native support in FCP. FCP 6 has all you need to get your material in and work with it using the Log and Transfer system within the app.
    I use a P2 reader to get the material in, and yes you can use a laptop but only the Powerbok type, the newer MacBook Pro's have the smaller PCMCIA slot so you can't transfer without a P2 viewer or reader. The good thing about the reader is it has 6 slots so you can just setup your transfers and then go away for a bite, come back and it's all done, rather than swapping cards etc.
    All in all a great workflow. The only problem I have experienced is a couple of cards I had became corrupted, although they played fine in the camera. I was able to record off the material via HD SDI and save it, it just wouldn't show up in the reader/viewer.
    The flexibility of the P2 system in terms of shooting formats, under and over cranking etc is fantastic, very much another step towards achieving filmic quality with digital equipment.
    I don't know if there are any real benefits to be had by shooting in HD and resolving down to SD. You'll end up just loosing a lot of frame info in the transfer and you'd be hard pushed to see any discernable difference between good quality SD and the route you propose.
    Having said that, investing in HD is a good move as will only get more widespread and lets hope that the formats calm down a bit!

  • Premiere Pro and AME crashes hole iMac

    Hello together
    today I set up my brandnew iMac 27 with 3.4 ghz i7 and GeForce GTX 680XM. Now i tried to render some importet projects (stored on my drobo) and premiere pro and Media Encoder crashes a few times my hole system. I have to mention, that I did the GPU-Hack for the Cuda acceleration.
    But I tried it also without GPU-acceleration and just in this moment my hole Mac crashes again while rendering after 1-2 minutes.
    below is one of the error-reports:
    Interval Since Last Panic Report:  35 sec 
    Panics Since Last Report:          2
    Anonymous UUID:                    3ADC0CCC-8C3E-34D3-152C-289AF67D7662
    Tue Feb 12 17:26:19 2013
    panic(cpu 6 caller 0xffffff80046b7e75): Kernel trap at 0xffffff80046a3722, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0x0000008000000038, CR3: 0x000000001a1a304d, CR4: 0x00000000001606e0
    RAX: 0x0000000000000000, RBX: 0xffffff803b078860, RCX: 0x0000000000000000, RDX: 0x0000008000000000
    RSP: 0xffffff839405bb40, RBP: 0xffffff839405bb90, RSI: 0x0000000000000060, RDI: 0x0000000000582d43
    R8:  0x0000000000000000, R9:  0x0000000000000001, R10: 0x0000000000fd2000, R11: 0x0000000000000246
    R12: 0xffffff8022ae3b40, R13: 0x000000000000000c, R14: 0x000000019e5da000, R15: 0xffffffffffffff9f
    RFL: 0x0000000000010246, RIP: 0xffffff80046a3722, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x0000008000000038, Error code: 0x0000000000000000, Fault CPU: 0x6
    Backtrace (CPU 6), Frame : Return Address
    0xffffff839405b7e0 : 0xffffff800461d626
    0xffffff839405b850 : 0xffffff80046b7e75
    0xffffff839405ba20 : 0xffffff80046cd3bd
    0xffffff839405ba40 : 0xffffff80046a3722
    0xffffff839405bb90 : 0xffffff80046778b7
    0xffffff839405be60 : 0xffffff8004670c2b
    0xffffff839405bf20 : 0xffffff800495af43
    0xffffff839405bf50 : 0xffffff80049e060a
    0xffffff839405bfb0 : 0xffffff80046cdc03
    BSD process name corresponding to current thread: Adobe Premiere P
    Mac OS version:
    12C3103
    Kernel version:
    Darwin Kernel Version 12.2.1: Thu Oct 18 12:13:47 PDT 2012; root:xnu-2050.20.9~1/RELEASE_X86_64
    Kernel UUID: 3F93B852-872F-3DF0-BCF8-46D48024C422
    Kernel slide:     0x0000000004400000
    Kernel text base: 0xffffff8004600000
    System model name: iMac13,2 (Mac-FC02E91DDD3FA6A4)
    System uptime in nanoseconds: 1591787384351
    last loaded kext at 7017365571: com.nvidia.CUDA     1.1.0 (addr 0xffffff7f85f16000, size 12288)
    last unloaded kext at 164420432471: com.apple.driver.AppleFileSystemDriver     3.0.1 (addr 0xffffff7f868c6000, size 8192)
    loaded kexts:
    com.nvidia.CUDA     1.1.0
    com.logmein.driver.LogMeInSoundDriver     1.0.0
    com.attotech.driver.ATTOiSCSI     3.4.1b1
    com.TrustedData.driver.VendorSpecificType00     1.7.0
    com.apple.driver.AppleBluetoothMultitouch     75.19
    com.apple.driver.AppleHWSensor     1.9.5d0
    com.apple.iokit.IOBluetoothSerialManager     4.1.2f9
    com.apple.filesystems.autofs     3.0
    com.apple.driver.AppleMikeyHIDDriver     122
    com.apple.driver.ApplePlatformEnabler     2.0.6d1
    com.apple.driver.AGPM     100.12.81
    com.apple.driver.X86PlatformShim     1.0.0
    com.apple.driver.AudioAUUC     1.60
    com.apple.driver.AppleHDA     2.3.5fc12
    com.apple.driver.AppleUpstreamUserClient     3.5.10
    com.apple.iokit.IOUserEthernet     1.0.0d1
    com.apple.GeForce     8.0.6
    com.apple.Dont_Steal_Mac_OS_X     7.0.0
    com.apple.driver.AppleMikeyDriver     2.3.5fc12
    com.apple.driver.AppleIntelHD4000Graphics     8.0.6
    com.apple.driver.AppleSMCLMU     2.0.3d0
    com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport     4.1.2f9
    com.apple.driver.AppleLPC     1.6.0
    com.apple.driver.ApplePolicyControl     3.2.13
    com.apple.driver.AppleIntelFramebufferCapri     8.0.6
    com.apple.driver.AppleBacklight     170.2.5
    com.apple.driver.AppleMCCSControl     1.1.11
    com.apple.driver.MaxTranserSizeOverrideDriver     3.1.7
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless     1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib     1.0.0d1
    com.apple.BootCache     34
    com.apple.driver.XsanFilter     404
    com.apple.iokit.IOAHCIBlockStorage     2.3.1
    com.apple.driver.AppleFWOHCI     4.9.6
    com.apple.driver.AppleSDXC     1.4.0
    com.apple.driver.AppleUSBHub     5.5.0
    com.apple.driver.AirPort.Brcm4331     612.20.15
    com.apple.iokit.AppleBCM5701Ethernet     3.5.0b9
    com.apple.driver.AppleAHCIPort     2.5.1
    com.apple.driver.AppleUSBEHCI     5.5.0
    com.apple.driver.AppleUSBXHCI     1.5.1
    com.apple.driver.AppleEFINVRAM     1.7
    com.apple.driver.AppleACPIButtons     1.7
    com.apple.driver.AppleRTC     1.5
    com.apple.driver.AppleHPET     1.8
    com.apple.driver.AppleSMBIOS     1.9
    com.apple.driver.AppleACPIEC     1.7
    com.apple.driver.AppleAPIC     1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient     196.0.0
    com.apple.nke.applicationfirewall     4.0.39
    com.apple.security.quarantine     2
    com.apple.driver.AppleIntelCPUPowerManagement     196.0.0
    com.apple.driver.IOBluetoothHIDDriver     4.1.2f9
    com.apple.driver.AppleMultitouchDriver     235.29
    com.apple.iokit.IOSerialFamily     10.0.6
    com.apple.kext.triggers     1.0
    com.apple.driver.DspFuncLib     2.3.5fc12
    com.apple.iokit.IOAudioFamily     1.8.9fc11
    com.apple.kext.OSvKernDSPLib     1.6
    com.apple.iokit.IOSurface     86.0.3
    com.apple.nvidia.nvGK100hal     8.0.6
    com.apple.NVDAResman     8.0.6
    com.apple.iokit.IOBluetoothFamily     4.1.2f9
    com.apple.iokit.AppleBluetoothHCIControllerUSBTransport     4.1.2f9
    com.apple.driver.AppleThunderboltEDMSink     1.1.8
    com.apple.driver.AppleThunderboltEDMSource     1.1.8
    com.apple.driver.AppleHDAController     2.3.5fc12
    com.apple.iokit.IOHDAFamily     2.3.5fc12
    com.apple.iokit.IOFireWireIP     2.2.5
    com.apple.driver.AppleSMBusPCI     1.0.11d0
    com.apple.driver.X86PlatformPlugin     1.0.0
    com.apple.driver.AppleSMC     3.1.4d2
    com.apple.driver.IOPlatformPluginFamily     5.3.0d47
    com.apple.driver.AppleGraphicsControl     3.2.13
    com.apple.driver.AppleBacklightExpert     1.0.4
    com.apple.iokit.IONDRVSupport     2.3.6
    com.apple.driver.AppleSMBusController     1.0.11d0
    com.apple.iokit.IOGraphicsFamily     2.3.6
    com.apple.iokit.IOUSBMassStorageClass     3.5.1
    com.apple.driver.AppleUSBHIDKeyboard     170.2
    com.apple.driver.AppleHIDKeyboard     170.2
    com.apple.iokit.IOUSBHIDDriver     5.2.5
    com.apple.iokit.IOSCSIBlockCommandsDevice     3.5.5
    com.apple.iokit.IOFireWireSerialBusProtocolTransport     2.1.1
    com.apple.iokit.IOSCSIArchitectureModelFamily     3.5.5
    com.apple.iokit.IOFireWireSBP2     4.2.2
    com.apple.driver.CoreStorage     296.10
    com.apple.driver.AppleUSBMergeNub     5.5.0
    com.apple.driver.AppleUSBComposite     5.2.5
    com.apple.driver.AppleThunderboltDPOutAdapter     1.8.9
    com.apple.driver.AppleThunderboltDPInAdapter     1.8.9
    com.apple.driver.AppleThunderboltDPAdapterFamily     1.8.9
    com.apple.driver.AppleThunderboltPCIUpAdapter     1.2.6
    com.apple.driver.AppleThunderboltPCIDownAdapter     1.2.6
    com.apple.iokit.IOFireWireFamily     4.5.5
    com.apple.driver.AppleThunderboltNHI     1.6.3
    com.apple.iokit.IOThunderboltFamily     2.1.8
    com.apple.iokit.IO80211Family     510.4
    com.apple.iokit.IOEthernetAVBController     1.0.2b1
    com.apple.iokit.IONetworkingFamily     3.0
    com.apple.iokit.IOUSBUserClient     5.5.0
    com.apple.iokit.IOAHCIFamily     2.3.1
    com.apple.iokit.IOUSBFamily     5.5.0
    com.apple.driver.AppleEFIRuntime     1.7
    com.apple.iokit.IOHIDFamily     1.8.1
    com.apple.iokit.IOSMBusFamily     1.1
    com.apple.security.sandbox     220
    com.apple.kext.AppleMatch     1.0.0d1
    com.apple.security.TMSafetyNet     7
    com.apple.driver.DiskImages     344
    com.apple.iokit.IOStorageFamily     1.8
    com.apple.driver.AppleKeyStore     28.21
    com.apple.driver.AppleACPIPlatform     1.7
    com.apple.iokit.IOPCIFamily     2.7.3
    com.apple.iokit.IOACPIFamily     1.4
    com.apple.kec.corecrypto     1.0
    Model: iMac13,2, BootROM IM131.010A.B05, 4 processors, Intel Core i7, 3.4 GHz, 32 GB, SMC 2.11f14
    Graphics: NVIDIA GeForce GTX 680MX, NVIDIA GeForce GTX 680MX, PCIe, 2048 MB
    Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3831554738424255352D474E2D4620
    Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3831554738424255352D474E2D4620
    Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1600 MHz, 0x029E, 0x434D534F384758334D314131363030433131
    Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1600 MHz, 0x029E, 0x434D534F384758334D314131363030433131
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF4), Broadcom BCM43xx 1.0 (5.106.98.100.15)
    Bluetooth: Version 4.1.2f9 11046, 2 service, 18 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    PCI Card: pci11c1,5901, sppci_ieee1394openhci, Thunderbolt@11,0,0
    Serial ATA Device: APPLE HDD ST3000DM001, 3 TB
    Serial ATA Device: APPLE SSD SM128E, 121.33 GB
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1d100000 / 2
    USB Device: Ext HDD 1021, 0x1058  (Western Digital Technologies, Inc.), 0x1021, 0x1d130000 / 8
    USB Device: hub_device, 0x0424  (SMSC), 0x2412, 0x1d180000 / 3
    USB Device: BRCM20702 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1d181000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x828b, 0x1d181300 / 7
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1a100000 / 2
    USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0x1a130000 / 5
    USB Device: Apple Keyboard, apple_vendor_id, 0x0250, 0x1a132000 / 6
    USB Device: USB Storage, 0x05e3  (Genesys Logic, Inc.), 0x0716, 0x1a120000 / 4
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8511, 0x1a110000 / 3
    FireWire Device: Drobo3, Drobo, 800mbit_speed
    I hope anybody can help me, it's a wedding video with deadline....

    I would venture to guess that adobe would tell you to disable the hack altogether and retest. It could be worth a shot. And I don't mean just shutting of the gpu in prefs, i mean actually disabling the pref.

  • What's the best way to share my Aperture and FCPX projects between an iMac and MacBook Pro?

    Greetings,
    I own both an iMac and MacBook Pro and I'm interested in figuring out the best way to have access to my iTunes, Aperture and Final Cut Pro X files not only when I'm at home using the iMac, but when I'm out and about with the MBP.
    I'm sure there are others among us who require a similar setup so I was hoping you guys could share with me how you solved this little problem, and also inform me of any potential negatives for your method so that I'm well prepared. Thanks.

    Best is a subjective term, as it will ultimately come down to preference. The fastest however, would be to wait until they market has a few thunderbolt drives available for purchase...
    But like the first poster stated, a firewire 800 drive, would be the more convenient choice for now. Or you could set the shared folder on your iMac to be avaible on your network and use it to allow your MBP to access it wirelessly.
    Obviously whatever you change, just save it back to the same folder on the iMac. Keep in mind it will not be as fast as the first suggestion (unless it is a wired network), but may be usefull for smaller files.
    However, you should have everthing backed up via an external drive, that is always useful...

Maybe you are looking for