2.5 is GONE!!! GOOD!

i check the bios page
no more 2.5!
good... hopefully no one els will get hurt bye it
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=10%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20&NAME=MS-6373

BeaverPants, I am quite aware of the terms when signing up for this forum.  I wasn't asking why it is this way, because I know why, I just don't agree with it.
Sadly djmorgan, you are mistaken.  You think I'm a newbie just because it says I am?  No, just like everyone else, I had to resign back up to this forum when the new one was put up.  I originally signed up back when the the nForce was first released.  Hardly makes me a newbie, ey?
The rest of your 'drible' is pretty pointless.  I know exactly what Deathstalker's role is in this forum, and what his expectations are of the members.  I was merely trying to make a point about the use of language.  Since this is a universal forum, not all language could be considered obscene from one person to the next.  I know there are plenty of english phrases that are considered vulgar in england, yet half of them would make no sense to americans, for example.
I can't even believe you finished up with last sentence about money and alcohol.  I threw that in as some comin relief, referencing marijuana as an alternative.  And if you don't believe this world has problems because of money and alcohol, maybe I should be the one rolling my eyes..
Now is that eay enough for you to read djmorgan, or should I split up that middle paragraph a bit more to help you out :P

Similar Messages

  • BT Infinity - gone GOOD to BAD!

    This is my speed test results after training period
    I was supposed to be getting 15.4Mb/sec download and 5.4Mb/sec upload as told on the phone and via BT wholesale ADSL checker...
    This was the case for the 1st 3 days or so... however it has dropped quite badly as you can see.
    Pings were excellent during the 1st 7 days, BBC.co.uk 9ms, multiplay.co.uk 10ms - perfect for gaming.
    How, my pings to BBC.co.uk average at around 60ms and multiplay.co.uk does not even respond!
    What on earth am I supposed to do to fix this - I really regretting my move from O2 to BT Total Broadband Option 3 now

    This mornings results - even worse.
    Test1 comprises of two tests
    1. Best Effort Test:  -provides background information.
    Download Speed
    8083 Kbps
    0 Kbps
    8984 Kbps
    Max Achievable Speed
    > Download speedachieved during the test was - 8083 Kbps
     For your connection, the acceptable range of speedsis 6288-8984 Kbps .
     Additional Information:
     IP Profile for your line is -8984 Kbps
    2. Upstream Test:  -provides background information.
    Upload Speed
    374 Kbps
    0 Kbps
    2000 Kbps
    Max Achievable Speed
    >Upload speed achieved during the test was - 374 Kbps
     Additional Information:
     Upstream Rate IP profile on your line is - 2000 Kbps

  • End of project markers

    Hi
    i read some of the post here regarding this and I believe i need to hit option-z then find the purple triangle. Problem is, i only see blue triangles. Is this the same?
    I have a 8sec track which i cropped till it's 3sec. When I export it out, the removed part is gone (good) but it is now replaced by silence; the track remains at 8sec.

    Thanks Christoph
    I see the ribbon now, but when i "export song to disk" the track is still 8 secs long. Anyway, what i did was i "send song to itunes", then the track becomes 3 secs, like what i adjusted the yellow ribbon to.
    Thanks again. You've been a great help.

  • 2.1 review with itunes 8 update for all

    I initially had addressed the international font issue that the new itunes was having. Apart from that, the addition of the genius tab along with minor improvements here and there seems to make the new itunes 8 likable.
    Now, for all iphone 3G users.
    I'll try my best to give you the complete review and opinions after couple of hours since the launch of the new update 2.1 .
    Battery Life:
    It has only been couple of hours, not even a full day yet but from what I have noticed, I say that there seems to be an improvement with the battery measure. It does not give a ridiculous full bar than a sudden decrease, it literally gradually falls. After 3 hours, the tip of the battery bar is now gone, good improvement on this.
    Phone Coverage:
    Rejoice. There is definite improvement on this part of the end. I am in Houston currently visiting and the place that I live in gave a poor coverage before. The bar with the 3g turned on was always moving from 1 bar to 2 bars. After the update, I am truly, on a full 5 bars most of the times with occasional drops to 4 bars. Stevey kept his word and the coverage has definitely boosted itself up.
    Call quality and drop issues:
    This may sound ********, but after the update, I made 10 calls to ten different people in different areas. Chatted for about 5-10 minutes with each individuals and it has been positive. No dropped calls and clear and sound communication both ways (me and the receiving party). It could be due to the fact that my area has good coverage (now, that is) but as I have mentioned above, the coverage issue has been resolved for me so I see this is a plus benefit that works out well for call quality issue as well.
    Application Stability:
    To pinpoint precisely, the currency converter that I had for the iphone has been not responding after the 2.0.2 update. I could not figure out whether the fault was with the phone's update or whether the application was buggy but after a solid update, this application is up and running smoothly. This is just one example. I have tested all my applications one by one to check their stability and it's all a positive check on this one.
    Contacts:
    The issue that had been driving me the most prior to this update.
    Simply put, the contact list was S.L.O.W with the 2.0.2. There was literally a lag of 4 seconds for me everytime I turned on my contacts list.
    Well, with this update now, this issue has been improved, but it is definitely NOT perfect.
    The lag time has now been decreased to 1 to 1.5 seconds from what I have noticed and the scroll movement is much better now. However, I think there is still much improvement needed on this issue that still needs to be worked on.
    BACK UPS:
    The topic that everyone seemed to have agreed upon before is this, the amount of time it takes for the iphone to be update through sync.
    Great improvement now, cutting the time it takes to update by more than half I would say.
    But like all humans, don't we always want things to be faster?
    I know I'm sending out a dangerous note here that will get me a lot of hate replies and evil looks from the users as well as the programmers (who I must give credit, are really working hard. thank you guys), but the backup time is still an issue.
    We could definitely see further improvements in this area as well.
    e-mail and text message issues:
    Frankly speaking, these two topics did not cause me much trouble before. The e-mails ran fine the way it should (i have yahoo! & gmail accounts on the phone) and the text messaging ran smoothly for me before.
    I guess since i did not have much of an issue on these topics, i definitely could rely on many other users for their kind inputs, reviews and suggestions.
    Thank you all for taking the time to read this lengthy post,
    and I hope that the new update is being a positive experience for you.
    I would greatly appreciate all suggestions and discussions from the fellow iphone users on this latest update.
    Regards.

    Thanks for the great review. One of the big things I was waiting for was the addition of the ability to increase notifications for SMS messages by up to two times.
    Well, Apple did implement this, just not very efficiently.
    I use SMS mainly as an alternative to a pager for work. However, the iPhone just does not repeat enough times to wake me up in the middle of the night. I was hoping that with this update, I would be able to control whether or not it gave me additional notification or not. Thinking that the notifications would be back-to-back.
    Here is what I have found since installing the update. The additional notifications are automatically turned on and you cannot control it. The additional notifications are not back-to-back notifications (like most other cell phones and pagers) but are instead spaced 5 minutes apart.
    So, if you get an SMS and do not look at it, the iPhone will notify you again 5 minutes after the SMS was received. If you still do not look at it, the iPhone will notify you again 10 minutes after the SMS was received.
    While I am glad they added this feature, I wish they had give the end-user more control over how this feature is configured.
    Just my two cents worth.

  • Can't install, MBR problems.

    I am using an old IBM 20 gB Deathstar HD just for installation practice. The drive previously held an install of Xandros 2.0 dating back from days of ineptitude.
    I complete all of the Arch 0.6 installation steps, selecting automatically layout and partition the drive, selecting only base package install and installing grub.
    Yet, when I reboot, it still says "Xandros" as a welcome screen, but, of course, Xandros Distro is gone (good!) and Arch doesn't seem to exist.
    This problem must be related to the MBR. Aside from the kludge of using a disk utility to overwrite the drive with zeros, or using Win98 boot disk to fdisk /mbr, How can I fix this problem?

    Verlager,
    Sounds to me as though we're getting closer.
    Help me with something, kindly. You list /root (boot) as one of your partitions. Aren't you simply trying to tell us that hda1 is your / partition and that you're planning to boot Arch from it? If so, in principle your arrangements are fine as far as I can tell. But clarify that point for us, might you? Additionally, I think we all might benefit from a look at your /boot/grub/menu.lst and your letting us know where you are installing grub, MBR or /.
    jlowell

  • How to install ojvm??

    I installed Oracle 9i JDeveloper Version 9.0.3 and when I ran it, a message appeared saying that ojvm client is not installed and that JDeveloper will be slower. I already followed the instructions on the manual. I ran InstallOJVM.bat c:\jdk and I also configured jdev.conf (SetJavaHome c:\jdk, SetJavaVM ojvm), but JDeveloper is still asking for it. I can use JDeveloper, but it's slows the system down. Please help.

    Hi There;
    Just set setJavaVM to hotspot insteat of ojvmit will work.
    I had the same error, know it's gone
    good luck
    Zine

  • Why did this preference change?

    Installing creative cloud in a group of 6 has gone good so far.  I am looking to change the way the grid works in Illustrator.  I previously would go into each user's preferences file and change two values /isRulerin4thQuad and /isRulerOriginTopLeft.  I don't see that option in Illustrator CC.  Has anyone looked over this and found a fix?  I tend to like positive going up just like everybody in the worgroup who has learned since Illy 10.

    Pretty sure.  It should be in the Library-->Preferences-->Adobe Illustrator 17 Settings.  I am opening the Adobe Illustrator Cloud Prefs and not seeing anything

  • I lost my iPod Touch, would Find My iPod work if someone connected it to their computer before restoring it?

    I know I lost my iPod at school, and I'm holding out hope that it hasn't been taken. So far Find my iPhone hasn't connected to it yet.

    It will only connect if it's attached to the internet. However, unfortunately, 'find my ipod' is easily disabled by the finder using iTunes to restore to factory defaults and wipe the device. Then it's no longer seen by 'find my ipod' and it's gone.
    good luck finding it. Maybe someone was honest and turned it in.

  • Iphone 4s unknown device

    I have buy factory unlocked iPhone 4s, update software to ios6 by wifi, i download itunes because i want to download music to my iphone, firstly connect iphone to pc by usb, charging is ok, but PC can not recognize my iphone and itunes too, faults like "USB Device Not Recognized" and then "software for the device has not been established" in device Manager iphone called "Unknown Device", i was try to reinstal itunes, chenge cables, ports, computers (window mac), reboot all but nothing works, what i should do?
    ps Charging is gone good!

    Hello Veiz,
    You may need to re-install the Apple Mobile Device USB Driver on your system.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Check out the section labeled, "5. Verify that the Apple Mobile Device USB Driver is installed", in the sub-section for the version of Windows that you're currently running.
    Cheers,
    Allen

  • Should I delete preview files to save space on my hard drive?

    Should I delete preview files to save sapce on my hard drive? At times the program crashes and I wonder whether I should get rid of these files to make more space.

    PCNoviceMesa
    Yes.
    If you run a SD project (whether you render stills or videos) and render, you are going to get DV AVI files automatically generated. If it is a HD project, rendering deposits MPEG2.mpg files on your hard drive (whether you render stills or videos). We are talking possibly GB amounts of files if you let them pile up long enough. For Windows 7, 8, or 8.1 64 bit, these preview files are by default in Libraries/Documents/Adobe/Premiere Elements/12.0 and in the Adobe Premiere Elements Preview Files Folder there.
    First let us see how much is piled up there before we take action against them.
    If the preview files there are part of an existing project or projects, the consequence of deleting those files is that you will have to render again that content in the project to get the best possible preview. If the preview files represent project long since gone, good riddance.
    Please check out the situation. And, then we can discuss also pile ups of conformed video and conformed audio files.
    More later.
    ATR

  • No DHCP lease

    We've had 4 Aironet AP 1131AG wireless access points working for sometime. Now, the users cannot get an IP address and get onto the network.
    The DHCP server is up and running just fine. The WAPs do not give out DHCP leases.
    The only thing that has recently changed is we tried to experiment with adding another SSID to allow for guest access. That has since been removed.

    Dennis
    Your back to basic trouble shooting, cna you ping the DHCP sever from the AP's or vice versa, does the route still exist. was a DHCP helper removed. are the clients authenticating and assoc to with an AP.
    save the config from one AP or use a spare AP to test with with no encrypition and no authentication. in other words back to basics.
    If you are using a WLC same list different device.
    I agree the DNCP server should hand out addresses untill they are gone.
    good luck
    Bill

  • User's sent messages missing

    a user complained to me that his sent mail before a certain date had gone missing.
    this happens to coincide with the date i ran an imsbackup - which backs up to an nfs mount (that has been acting weird lately -not sure if this is relevant)
    anyway - what should i do - mboxutil, recontruct? should i look on the filesystem for the files. can i run these commands only his mailbox only?
    thanks for any detailed info.
    s7

    Thank you both for all the info.
    Good to know I didn't hurt anything with the
    reconstruct -r -f
    you said when applied globally - if applied to a
    single user is it then problematic?Nope, not a problem. That's why we offer the ability.
    >
    to look at the disk - what and where should i look?
    how can i find the user's folder easily? they seem
    to be burried in lots of numeric subfolders ...Yes, the user's mailbox is buried.
    we provide a "hashdir" utility to tell you where to look.
    hashdir uid
    will give the number subdirs to the user's mailbox. It is case sensitive.
    >
    how might i know if my disks are having trouble?
    iostat? ??var/adm/messages
    >
    it may have been the user, but he said no. and it did
    coincide w/ my imsbackup ...I can't imagine any mechanism where an imsbackup would remove messages from the store.
    >
    i didn't manipulate the store files.
    I was able to copy the backup off this old Snap
    appliance over to a much newer Snap appliance. I was
    then able to imsrestore the messages in the folder he
    said were gone. good
    >
    For some reason on the older device, Solaris9 got RPC
    can't decode errors when trying to imsrestore - but
    not on the new - I tried forcing older versions of
    nfs, different protos, etc. but in the end it became
    easier to copy the file using windows to the new
    server, and then set up the new mount.
    so far, it's only been this one user, and it did
    coincide w/ when i ran imsbackup (to the old/bad nfs
    mount -in any event, it apparently wrote the backup
    file fine).That's a very good thing. . .
    >
    i am using:
    /opt/SUNWmsgsr/sbin/imsbackup -f- / > /nfs-back/
    w/o the space following the f ...
    suppose i better change that. my backup file is 1.5gb.

  • HELP!! 17" PB Alum. won't start at all....

    Ok did the steps that it gives to reset PMU and PRAM. no work
    This is what happened. I had left my charger at work, so i got it,and plugged in my PB to charge, i noticed that my screen seemed a tad odd like when you let your battery die and the screen goes wacky. But never got to go dead cause i had half the battery there. But in any case i restarted it. But instead of hearing the gong sound and hearing the fan blow air, i heard nothing but the disc drive seeking. So i press the on button for 10 seconds, and it shuts off. then i try to restart again. and i see nothing happening, the light where you pop open the screen glows bright then dim bright then dim, but doesn't do a thing. the drive seeks but nothing else. So i stick a disc in it ***** it in and still nada. then i do the PMU and PRAM thing. Nothing happens. i'm about to open up my PB and see if the RAM card somehow popped out of place or something. But still under warranty so thinking otherwise. But **** i need this **** thing for work in the morning and i'm at wits end. HELP Quickly if possible.

    i took it to a certified service place in Pasadena, CA cause i needed to a rush job for it and apple stores were giving me a date for two day away, but they found that the logic board was gone, good thing i still had warranty for it... or man i would be just buying myself a whole new powerbook. well if anyone comes across the same issues i had, i'd say take it in and have it checked, cause it might be what happened to me. cause i would of never figured that out.

  • Smart CallConnector Server

    Anyone know when 2.2 is coming out? I thought I saw a reference somewhere stating that Cisco was planning a late July release. That has come and gone.

    Good timing. It is comming out soon. Here is the Beta / Release Candiate.
    https://supportforums.cisco.com/docs/DOC-26335

  • Can't install quicktime or itunes I recieve error code 2738.  I'm running windows Vista 32 with Service Pack 2.  I have tried old and new version of both programs.  Also, have gone through Apple's online help with no good outcome

    Can't install quicktimeor uninstall it for that matter and itunes I receive error code 2738 with both downloads.  I'm running Window Vista with Service Pack 2.  I have check for all window update.  I have gone through Apple itune help list.  Even going into cmd to do regsvr32 vbscript.dll which was successfull. Can you help...my son had to register his ipod at the neighbors house..What going on.
    Son even call apple with no help and was give Microsoft number no help there either they wanted me to call HP.....run around

    Excellent news!
    Strange how sometimes the fixit works better than the manual methods, and sometimes the manual methods work better than the fixit. It differs from Microsoft fixit to Microsoft fixit too. (Unfortunately, because these "anomalous 2738s" are pretty rare as install errors go, I don't have a good feel yet for whether or not it's the fixit or the manual method that's more likely to work in iTunes/QuickTime installation contexts.)
    Afraid I'm not very good on earbud troubleshooting, but fingers crossed the folks over at the iPod communities might be able to help:
    https://discussions.apple.com/community/ipod

  • I am a Windows Vista User. I updated my iTunes Version 10.3. Then, when I re-opened my iTunes, all files were gone! Good thing I consolidated the files and just imported the files again. But, this happens every time I close and open my iTunes. Help?

    I am a Windows Vista User. I updated my iTunes Version 10.3. Then, when I re-opened my iTunes, all files were gone! Good thing I consolidated the files and just imported the files again. But, this happens every time I close and open my iTunes. Help?

    In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"

Maybe you are looking for