2.6 processes swapped out

I have a 2.6 on an i386 platform.
He is up and running at the moment but it's acting stange.
Uptime doesn't give the time it's up.
who -r doesn't give the runlevel he is in.
When i give vmstat i see that 16 processes are swapped out.
When i tried to install top he gives me "pkgadd: ERROR: unable to determine current run-state"
what is wrong here ?

Gullible Jones wrote:
brain0 wrote:
neodreams wrote:
Fatal error: Your kernel does not support iptables.
Firewall not started
Go back to 2.6.15
As I can't view the WebCVS right now, I am not sure. But many iptables modules moved to Xtables, which has to be enabled for iptables, ip6tables and arptables. If you forget to enable Xtables (or just copy the old .config file from the old kernel) you will end up without iptables support.
In that case, Xtables should be enabled in the stock kernel (which is what Neodreams is using).
I have same problem with Shorewall Firewall:
ERROR: Trafic Shaping requires mangle support in your kernel and iptables
I don't have other problems except boot is slower but it doesn't bother me

Similar Messages

  • How to get details on swapped out processes?

    I am trying to get the details on some swapped out processes. Currently vmstat is showing 71 processes a swapped out:
    vmstat 3 3
    kthr      memory            page            disk          faults      cpu
    r b w   swap  free  re  mf pi po fr de sr vc vc vc --   in   sy   cs us sy id
    *0 0 6 5598448 512968 155 352 428 40 42 0 22 3 28 1 0 1982 3904 1905 7 14 79*
    *0 0 71 5091488 436568 0 4 0 0 0 0 0 0 1 0 0 976 1215 945 0 3 97*
    *0 0 71 5099088 440896 2 5 0 0 0 0 0 0 2 0 0 1004 1221 991 1 2 97*
    A search of the MOS knowledge base turned up Support Recommended doc 1009494.1 How to use DTrace and mdb to Interpret vmstat Statistics.
    The section titled "kthr: Swapped out Threads (w)" includes the following statements and commands:
    To see the kernel threads swapped out during the sample period:
    $ dtrace -q -n 'fbt::swapout_lwp:entry{ proc = (proc *)arg[0]->t_procp; printf("Lwp: %d of \t Proc: %s being swaped out\n",arg[0]->t_id, proc->p_user.u_comm);}'
    The vmstat output doesn't tell what processes are swapped out. Mdb(1) can be used to print swapped out processes:
    # echo "::walk thread myvar|::print kthread_t t_schedflag|::grep .==0x8|::eval <myvar=K|::print kthread_t t_procp|::print proc_t p_user.u_comm"|mdb -k
    The dtrace command does not pass edit:
    *dtrace -q -n 'fbt::swapout_lwp:entry{ proc = (proc *)arg[0]->t_procp; printf("Lwp: %d of \t Proc: %s being swaped out\n",arg[0]->t_id, proc->p_user.u_comm);}'*
    *dtrace: invalid probe specifier fbt::swapout_lwp:entry{ proc = (proc *)arg[0]->t_procp; printf("Lwp: %d of \t Proc: %s being swaped out\n",arg[0]->t_id, proc->p_user.u_comm);}: syntax error near ")"*
    The mdb command does not return any thing:
    *#echo "::walk thread myvar|::print kthread_t t_schedflag|::grep .==0x8|::eval <myvar=K|::print kthread_t t_procp|::print proc_t p_user.u_comm"|mdb -k*
    The server is running:
    uname -a
    SunOS rizzotest 5.10 Generic_142900-11 sun4v sparc SUNW,SPARC-Enterprise-T5220
    cat /etc/release
    Solaris 10 10/09 s10s_u8wos_08a SPARC
    Copyright 2009 Sun Microsystems, Inc. All Rights Reserved.
    Use is subject to license terms.
    Assembled 16 September 2009
    Thanks,
    GlenG

    Satellite M505-S4975
    There are some utilities that read SMART data from the log.
       Comparison of S.M.A.R.T. tools
    But, as Peter says, there is no way to tell when such a drive will fail. Best to replace it now.
    -Jerry

  • Swap out a process forcefully

    I like to swap out a process either from command line or inside the application.
    Is there a way to do that?

    There really isn't a way to do this, per se. But it is a rather odd request.
    Perhaps you are trying to do something else? There are many ways
    to do resource management on Solaris, but I can't think of a good
    reason to forcibly swap a process out.
    Most of the time, even when memory is short, the processes will be
    paged out. Swapping only occurs as a final ditch effort when there
    is a serious RAM shortfall. The difference between the two is that
    in a demand paged virtual memory system like the Solaris OE, pages
    which haven't been recently used can be paged out. Whereas in
    older, non-demand page virtual memory systems (SunOS 3.x, SVR3)
    the whole process would get swapped out. Amongst the advantages
    of the demand paged VM system is that pages can be shared amongst
    processes (eg. shared libraries) and the shared pages will remain in
    RAM if used. This complicates matters when you speak of forcibly
    swapping out a process. So, is that what you really want to do?
    -- richard

  • I recently had to swap out my iphone 4s and I am having problems restoring photos and videos from icloud.  I get a message on my phone that says " the URL you are requesting is not found on this server".  Pics and videos have been deleted too.

    I recently had to swap out my iphone 4s and I am having problems restoring photos and videos from icloud.  When I restored my phone from icloud, half of my pics and videos have been deleted, the pics that were restored on my phone are very blurry, and the videos won't play.  I get a message on my phone that says " the URL you are requesting is not found on this server".  I have erased and reset my phone twice, but every time I do it, more pics and videos are deleted.  I have backed up to icloud and iphoto, however, some of the pics are no longer on iphoto either.  Is there someway to get the videos to play on my phone again?  Make the photos not as blurry as they are now and to restore the pics and videos that have been lost?  I really would love to have them back, this phone is supposed to be the best and right now it doesn't seem to be.  Please help if you can.

    I too have noticed that once i restored from iCloud. Pictures blurry and videos wont play!
    Need help too!!

  • Is it possible for me to swap out the apple logo in the message screen saver with my company's logo If so, how? Thanks!

    Is it possible for me to swap out the apple logo in the message screen saver with my company's logo? If so, how? Thanks!

    How long will my iPod service take?
    If you choose to use the Online Service Assistant, or service via Apple Technical Support: If your iPod is not personalized, you can expect service to be completed within approximately one week from the time you send your iPod to Apple. If your iPod is personalized, you can expect service to be completed within approximately ten calendar days from the time you send your iPod to Apple.
    Attention iPod shuffle customers: Service for iPod shuffle is performed by means of an express replacement program, via Online Service Assistant or Apple Technical Support. For more details, please review the Express Replacement Service tab on the left.
    Above from:
    Apple - Support - iPod - Service FAQ
    If it is caused by a hardware problem there is nothing you can do to prevent it from recurring unless it was caused by abuse like from dropping the iPod.
    Otherwise make sure you ask apple how they fixed. it.

  • Is there a way to check if the rechargeable battery is the original?  I have a feeling mine has been swapped out...

    I have a feeling my rechargeable battery pack was secretly swapped out by another user (whose battery had died) - left for vacation working computer, returned from vacation battery not charging.  Is there any way to check (serial number, etc.) what battery came with the purchased computer?  Any help would be appreciated.

    kimberlyfrompennington wrote:
    Is there any way to check (serial number, etc.) what battery came with the purchased computer?
    No, but you could check to see if the battery installed has about the same amount of charge cycles if you were paying attention to that number. 

  • How can I tell if the guts of my monitor have been swapped out?

    Hey y’all… I have an HP ZR30w monitor that I sold on ebay. The buyer claimed it didn’t work and I had to give the money back. He returned it but there are pixels burned out and spots where the colors are all purple and the case is all scratched up around the seems. The case has the same serial number, {personal info removed}, but I’m positive the guts were swapped out. (I took it apart and screws are missing) It worked perfectly when I shipped it out.
    Is there any identification or anything that would indicate if the insides belong to the serial number on the outside?
    Thanks!

    Hello badamsios,
    You want to know if you can match the parts inside the monitor to the serial number.
    Sorry to hear what happened.
    The only numbers that are going to be on the parts are the part numbers, and they are generic for the part.
    Have a good day.

  • Can I swap out a iPhone 4 sim card into a iPhone 5 with the same carrier?

    Here is the situation.  I used to have Sprint as my personal cellphone carrier and just had bought an iPhone 5 when my employer put me on a business cellphone plan that they pay for.  They bought one of the bargain basement original iPhone 4 handsets (not to be confused with the 4S) for employees to use, also on the Sprint network.  The phone is owned by them; the plan is paid for by them.  We just get to use it.  As a result, I decided to just close out my personal cellphone account, even though it was a better phone.  I used my 64GB iPhone 5 as my iPod, it worked great for music, apps, books, etc that I needed, and I just used the 8GB iPhone 4 just for phone calls and text messages. 
    Well recently, with the 5C and 5S being released, I wanted to know if the iPhone 4 could be upgraded by my employer to a new handset, preferably a 32 GB 5C or a 16 GB 5S.  My employer has been slow to respond, because there are so many employee accounts to weed through and most are perfectly fine with an older phone.  I am not, because the new operating system is slower on an iPhone 4 than an iPhone 5.
    I want to ask my employer if its possible to get the SIM card from the iPhone 4 just swapped out into the iPhone 5.  Is that possible?  I understand that there is a size difference in the SIM cards.  Is this something I could do myself, just pop it out and pop it in in the new handset?  Or is this something that will require going to my employer to do, or to a Sprint store and have them do it?  Do I have to be concerned with warranties being voided if I want to do this? (Keep in mind the iPhone 4 is my EMPLOYER's property, and they pay the bill as well.  My inactive iPhone 5 is MY PROPERTY and has no current cellular service.) 

    I want to ask my employer if its possible to get the SIM card from the iPhone 4 just swapped out into the iPhone 5.  Is that possible?
    No, iPhone 4/4S uses micro-sim and iPhone 5/5C/5S uses nano-sim.

  • Swapping out iBook G4 video card?

    Is it possible to swap out the video card in my 1.33GHz iBook G4 14.1"? If so, what sort of video card do I need? Thanks in advance!

    Is it possible to swap out the video card in my
    1.33GHz iBook G4 14.1"? If so, what sort of video
    card do I need? Thanks in advance!
    No, it is not possible.
    Ted

  • WARNING:Oracle process running out of OS kernel I/O resources (1)

    Hi,
    on my server, IBM power6, with oracle 10.2.0.4, dbwr trace report some errors like this:
    *** 2010-08-31 06:26:46.574
    Warning: lio_listio returned EAGAIN
    Performance degradation may be seen.
    WARNING:Oracle process running out of OS kernel I/O resources (1)
    *** 2010-09-01 07:11:38.691
    Warning: lio_listio returned EAGAIN
    Performance degradation may be seen.
    WARNING:Oracle process running out of OS kernel I/O resources (1)
    The awr in this period of time reports:
    Top 5 Timed Events Avg %Total
    ~~~~~~~~~~~~~~~~~~ wait Call
    Event Waits Time (s) (ms) Time Wait Class
    db file sequential read 509,435 2,610 5 42.3 User I/O
    CPU time 1,714 27.8
    log file sync 55,309 1,146 21 18.6 Commit
    log file parallel write 60,498 937 15 15.2 System I/O
    db file parallel write 27,166 295 11 4.8 System I/O
    The workload was represented from a sqlldr with rows=100000.
    Warning in trace file worry me.
    Warning: lio_listio returned EAGAIN
    depends on aioserver that is low, 10 instead 50, because we have 40disks*10/8 cpu.
    Can anyone help me?

    In note 443368.1:
    " If you are using JFS/JFS2, then set the initial value to *10 times the number of logical disks divided by the number of CPUs*."
    pstat -a | grep -c aios
    161
    lsattr -E -l aio0
    autoconfig available STATE to be configured at system restart True
    fastpath enable State of fast path True
    kprocprio 39 Server PRIORITY True
    maxreqs 4096 Maximum number of REQUESTS True
    maxservers 10 MAXIMUM number of servers per cpu True
    minservers 1 MINIMUM number of servers True
    Edited by: Davy on 1-set-2010 3.04

  • Swapping out Graphics card on HP Envy 17-k251na

    Hello! I have a feeling that i may have been given the wrong information by the assistant i bought my machine from in PC world... 
    I was assured i would be able to swap out my graphics card, which is a NVIDIA GeForce GTX 850M (4 GB DDR3 dedicated)
    and upgrade. 
    I was also told i could upgrade the processor. 
    I've been told by a few people that this simply isn't true and to upgrade the Graphics Card i'd need a whole new motherboard... but the term "dedicated" is what's confusing me... am i wrong in thinking that it works seperately and the term "intergrated" means that it's part of the motherboard? 
    I spent a lot of money on this laptop on the premis of what the assistant told me! Ultimately that i would be able to upgrade this laptop as time went on. (I want to primarly want to use this for gaming) 
    I'm hoping what people are telling me is all hear say.. it doesn't seem to make sence to me that i can choose between two different graphics cards to run games with and they'd BOTH be intergrated into the mother board....
    The other one that's in my machine is an Intel Graphics HD 5500. 
    Also this machine has a 1 TB HDD and an 8GB SSD, i'd like to also swap out for a larger SSD... i was also told that this was possible. 
    Hoping for good news here, any help woud be appreciated! 

    Right now the links to your product manual are down but assuming the 17-k200 series is like the 17-k000 and 17-k100 series there is no easy access to the hard drives and memory. That is, no customer accessible panels on the bottom you can open by just removing a screw. Further, there is no graphics "card" to just "swap out". "Dedicated" and "integrated" refer to the use of memory. An integrated video card shares system memory; i.e. the RAM supplied by the RAM modules you clip into the RAM slots. Dedicated video memory is memory built into the video chip. On a laptop, both kinds of video cards are soldered to the motherboard and cannot be upgraded. Your laptop has "switchable" graphics and most definitely has two different video chips soldered onto different places on the motherboard.
    As for the processor, you already have one of the newest and best laptop processors offered. The video you have is also pretty top-notch. I am always a bit baffled by people who buy a laptop with the idea of upgrading it. Laptops just do not work that way. Components are way crazy expensive. Your processor is so new there are none to be purchased but when it does become available it will be over $350. On the very few super expensive engineering and high-end gaming laptops that do have a kind of removeable graphics card (mxm) high-end ones run at least $450. So even if you could do the upgrades, which you cannot, you would be looking at over $1000 with labor. I understand people do not appreciate the cold reality of this. 
    And just to hit you with more bad news, on your model the CPU might be soldered to the motherboard so it cannot be upgraded at all. I can confirm when your Manual is back online. 
    Upgrading memory and changing the hard drive for an SSD also requires extensive complex disassembly. 
    You have one of the best consumer laptops on the market. There is just not much upgrade headroom. It sounds like what you really want is a gaming laptop. HP makes one called the Omen which sells for about $1500-1800US, and would be a little stronger than what you have, particularly in the graphics. But even that is kind of a middle of the road thing. You can order a custom gaming laptop from a company like Sager and it is going to cost upwards of $2500 for the very best. Maybe you can complain to PC World and just return the one you have and start over a little wiser for the trouble. 
    If this is "the Answer" please click "Accept as Solution" to help others find it.  

  • Can I swap out old RAM with new before install of new HD?

    I am replacing a friend's HD for her MacBook Pro 5,2 and also swapping out the old memory (2-2GBs) for new memory (2-4 GBs). My question is: does it matter whether I install the new memory before I install the HD or after? If after, does it matter whether or not the HD has been formatted? Has an OS installed on it? Any help here would be very much appreciated!

    Your snow leopard dvd will format the HD properly to install the OS. Just replace the HD put in the snow leopard disc and let it do its thing

  • Can I swap out my airport card for one that handle 802.11n?

    I have an older MacBook Core Duo and I see the newer MacBook Core 2 Duo can connect using 802.11n?
    Is it possible to swap out the airport card in my MacBook with an updated one to get the faster speeds?
    Thanks

    Yes, there are third-party cards that will work. QuickerTek has one that should work.

  • Can I swap out my mechanical HDD for a Solid State?

    Can I swap out my mechanical HDD (7200 RPM, 320Gb) for a solid state drive? If so, am I able to purchase such a drive, like the ones that come standard in Macbook Pros on the Apple site? Can I purchase an item like this from Apple?
    If not, could someone point me in the right direction?
    Also, on the same note, is it possible purchase replacement Mechanical HDD (like the one I already have) from Apple; if so, a link please?
    Cheers!

    You'll find everything you need here, swapping them is easy just get the right tools and take it slowly.
    http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/

  • Can you swap out the logicboard of an older model mac for a newer one?

    So i just bought a mac on ebay, its in good working condition, however i was wondering if i was able to swap out an older model logicboard for a new one.  The mac i currently have is a unibody mac, MB466LL/A, and the logic board i was looking to possible switch it out with would be the (Logic Board 661-6158 820-2936-B.)  Let me know if this is possible.  Work on computers often and have built many pc's so that aspect will not be a problem, im just wondering if this request is feasible.

    Yes, its possible.
    Step one: Buy a second, fully working MacBook of the model you want.
    Step two: Sell the first MacBook you bought.

Maybe you are looking for

  • HOW TO: Open SQL Developer from a batch file with specific tables opened

    I use SQL Developer daily as I develop database intensive programs. ** Question ** How can I define a specific configuration of tabs (i.e. tables, procedures, etc) to be opened upon startup of SQL Developer? For example, creating a .BAT file to open

  • CS5 Photoshop Offline Help No Search Result Malfunction

    In summary the Adobe Community Help application or the "Launch Help in Browser" functions wont return any search results for the Adobe Photoshop CS5 OFFLINE reference. I use my main design machine off the net. It's not often I reach for the help text

  • Connectivity between Oracle database and client...

    Hi guys, I was asked to make a connection between oracle client and database via internet so that our clients can access the database from different parts of the country, and the data that is transmitted in the internet does not require security cons

  • Basic questions about downloading updates and smartnet licensing

    I have been trying to get a definitive answer to these questions by browsing around cisco.com, but so far no luck. 1. I manage an ASA5510 for which there is no current smartnet contract.  It is running an outdated code version (8.2) of the Security P

  • RunInstaller in command line mode

    Hi All Can I runInstaller in command line mode without using the GUI? I download linux_11gR2_examples.zip and upload it onto my Amazon AMI I would like to iinstall the examples but I am not able to set xdisplay so how I can get around this? -Thanks f