2 Airport Expresses and a Time Capusule
Hello, 3rd post so please be gentle.
I have a Time Capsule getting its internet connection into the ethernet WAN socket. I have two ethernet points upstairs (one in each bedroom) which connect back downstairs to the Time Capusule's LAN ports. I want to utilise the wired connection up to the bedroom then get an Airport Express (i already have two) configured to get the internet from its ethernet port and host my wireless. Acting like a Wireless Access point. Can i do this?
In essence. If i have my macbook pro upstairs in my bedroom i want it to use the signal in the bedroom and not have to fight to try and get the signal from downstairs.
Do i need to set up my Expresses to 'Join' a wireless network, or 'extend' or both or neither.
Please help guys.
Cheers
Do i need to set up my Expresses to 'Join' a wireless network, or 'extend' or both or neither.
Neither. Both of those features are used when you are wirelessly extending a network. Since the AirPort Express (AX) will be connecting via Ethernet, you do not use those.
All you need to do is configure the AX to create a wireless network and act as a bridge (not sharing a single IP address). If you use the same SSID (network name) and wireless encryption type/level/password as the Time Capsule, your devices will seamlessly roam between the two base stations. It will appear as one wireless network.
Similar Messages
-
I have a new Airport Express and each time I open my laptop, I have to select my network. How to I configure to automatically go to my network>
ATOV,
Go to System Preferences...>Network>Wi-Fi>Advanced...>✓ "Remember networks this computer has joined," and click "OK." -
To be more detailed, my AirPort Extreme needs to be extended by an AirPort Express, which then is extended to my personal Time Capsule. The internet drops on my MacBook Pro and other MacBook Pros randomly. We then reconnect with no problem and go on with what we were doing. The internet is fine. Always able to connect. We have Open DNS set up as well. But the flaky internet is annoying. Any ideas how to fix this?
The primary issue that you will need to contend with is the distance between routers. 300' would be at the fringe of the signal coming from the base station located in the house which, most likely, make it too "weak" to extend/repeat with the second base station at the shop.
There is a method to configure a relay base station between them in a Wireless Distribution System (WDS), but a WDS has two major drawbacks: 1) It can only operate in the 802.11g Radio Mode, and 2) For every base station participating in the WDS, the overall bandwidth will be cut in half .., so with a total of three (main, relay, & remote), the maximum of 54 Mbps (for 802.11g) would be more like 15-17 Mbps. If you plan on streaming HD video (either 720p or 1080p), your local wireless network may not have enough bandwidth to do so successfully.
You proposal to run the DSL line to the shop does offer another option. Instead of running a DSL line, run an Ethernet cable between the house and the shop. You would connect one end to any of the available LAN ports on the AirPort Extreme to the Ethernet port on the AirPort Express. You can then configure both base stations into a roaming network and not have bandwidth loss of the WDS. -
A Time Capsule, Airport Express and AT&T 2Wire walk into a bar...
Alas, I'm sure this question has been asked before, but my reserach keeps turning up separate answers. So I thought I'd turn to this forum for some advice. Ultimately I'm seeks suggestions on various ways to configure my network to allow easy backups, connection two rooms, and wirelessly print from anywhere.
I have a:
Time Capsule (dual band) - used for Time Machine backups
Airport Express (older)
and new 2Wire 3800HGV-B wireless modem/router from AT&T (for U-verse internet/TV)
My room configuration is:
Living room with TV, internet connected DVD player, and new AT&T 2Wire Wireless U-verse modem
Home office with 2 desktop comptuers (no wireless cards) and a USB printer.
Two roaming laptops which move around the rest of the house
The livingroom and the office can't be connected with a physical wire.
What I was hoping to do was setup my office with the Time Capsule in the office as a wired hub, and then use it as a wirelessly bridge to the 2Wire network. But as I understand it, a Time Capsule can't be used as a bridge to a non-Apple product. Please correct me if I'm wrong.
Alternately I could always get wireless cards for the desktop computers, but this leaves the printer.
I've read suggesitons of people who have used their TC as the primary router, disabling wireless on their AT&T 2Wire, and hooking the two together with ethernet. Others who just join the TC to the 2Wireness network. But really what I'm seeking is a way to join the two rooms.
Any thoughts? Am I asking the right questions or providing the right information?
Much thanks,
dana.So I figured I'd go with an initial suggestion and attached my TC via ethernet to the 2Wire modem/router in my living room, and make the TC my primary wireless router.
Good plan
since both will be in the same room, I assume I need to disable wireless on the 2Wire
Correct
What kind of configuration do I need to do on the TC, or do I just following the wizard and select 'Extend existing network'?
You can follow the guided setup or I can give you a step by step manual setup. In either case, you will configure the TC to "Create a wireless network".
("Extend" is only used if the TC connects using wireless only....you will be using Ethernet from one of the LAN <-> ports on the 2-Wire to the WAN port (world icon) on the TC.
The guided setup will normally sense that the TC is connected to another router and suggest that the TC be configured in Bridge Mode, which is the correct setting. Otherwise, select the Bridge Mode option when it is presented.
Note....If you have a newer dual band TC, the Guest Network option cannot be enabled when the TC is configured in Bridge Mode. So, if you want a "Guest" network, maybe the 2-Wire could provide that service.
Should I attach this (via ethernet) to the TC or the 2Wire?
Pick a LAN <-> port on either one, your choice, whichever is easier
What should the AT&T DVR be connected to?
I'm not familiar with an AT&T DVR, but if it connects via Ethernet, you can connect to a LAN <-> port on either the 2-Wire or the TC
For printing, my plan is to attach the printer through USB to the Airport Express and then connect that wirelessly to the TC network (though my first attempt at this failed to connect).
Suggest that you get the TC up and working smoothly. Then tackle the Express. -
My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network? Network is administered through an iMac running OS X Yosemite 10.10.2. Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.
Ok.. gottcha
The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
Here is my usual set of instructions to get anything working on Yosemite.
The best way to fix problems is a full factory reset of all the AE in the network.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 and AEwifi for basestation and wireless respectively.
Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Now mount the disk of the second AE in finder... manually.
Use Go, Connect to Server and type in the AE ip address.
SMB://10.0.1.2
Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/ -
Best way to extend wireless via airport express and time capsule
best way to extend wireless via airport express and time capsule
i live in a two storey house where i use my airport express to create a wireless network in the main floor, and time capsule to extend it in the upper floor, where my room is. i have like 16 mbps in the main floor, and 2-3 mbps in the upper floor after having speediest.
i used time capsule in the upper floor because i use wireless backup daily and don't want to put internet down while i im doin it and consequently my parent can have internet access in the main floor, am i right? or do i have make just the opposite in order to have a good internet speed?
secondly, while checking airport express wireless mode on airport utility, there is like 4 different type of radio mode(802 11n bg comp, 802 11n 2.4, 802 11n a comp, 802 11n 5ghz) which i have no idea what they mean
what do you recommend?
we have like iphone4, iphone 3g, mbookpro, ipad, ipad 2, samsung tv and a sony vaio laptop in the wireless network
thank youWhat you have would appear to be working but I can comment how I would redefine your setup. Note that both Airport Express and Time Capsule can function as wireless base stations so you do have wireless everywhere and at all times — using the Time Capsules for backups doesn’t mean your parents won’t have internet access regardless of the where the base stations are located.
You appear to have devices to connect to your network that use the 2.4 GHz band with 802.11g such as the iPhone 3G and perhaps the 5 GHz band with 802.11n such as likely the Macbook Pro if it’s a recent model. The iPhone 4 can use 5 GHz and 802.11n. Can’t comment on the Sony and Samsung but you can check their specs.
Now the Time Capsule (if it’s a recent version), can simultaneously supply 2.4 GHz and 5 GHz band signals, but the Airport Express (if it’s recent) can only use one of those bands at one time. Likely the lowest common denominator for your devices is going to be the 2.4 GHz band since the devices that are capable of using 5 GHZ also support 2.4 GHz. If you don’t use 5 GHz, you won’t lose much in a two-storey home because likely it’s the 2.4 GHz band is better signal anyway because 5 GHz signals drop off quickly with several walls/floors to penetrate.
You also didn’t mention if the Airport Express is used to support a printer and/or AirPlay (using iTunes to play on remote speakers via the Airport Express connection) but that might also be a factor in the best location to place the Airport Express. Although the printer could be switched between the Time Capsule and the Airport Express if needed, only the Airport Express will support your remote speakers.
Recommend you use the Time Capsule as the Base station. When using Airport Utility to define the network, after you name your network, etc., select the Wireless tab, check the box “Allow this network to be extended” and set the Radio Mode to "802.11n (802.11b/g compatible)”.
Using the Airport Utility, click on the Airport Express; after you define the device and network name, select the Wireless tab, define the Wireless Mode as “Extend a Wireless Network” and check the box “Allow wireless clients”.
Hope that helps. -
How to extend wireless with airport express and time capsule
So, I have a time capsule & because of the thick walls in my apartment, I can barely use my ipad and iphone at night in my bedroom! (my macbookPRO stays at 3 bars however!)
I bought an airport express thinking I could plug it closer to or inside my bedroom to boost the signal - but it doesn't seem to work that way - any tips on how to set this up?
TWO ADDITIONAL Qs:
Does connecting directly to my time capsule (which i'm assuming i'd need another ethernet cable) help with the boost? (then negates the other great uses for the airport express it seems)
Isn't there a way to do the boost with the express wirelessly? I'd really love to get wireless speakers, use airplay AND be able to use my devices just two rooms away .... HELP!
thanks so much (when did apple phone support start to be closed on Sundays?)
cheers.Suggest that you check your setup again to make sure that the settings are correct on both the Time Capsule and AirPort Express.
Open AirPort Utility, select the Time Capsule and click Manual Setup
Click the Wireless tab below the row of icons
Make sure that a check mark is entered next to "Allow this network to be extended".( If the box is not checked, the Time Capsule will not extend to the AirPort Express)
Click Update to save your settings and close AirPort Utility
Next, open AirPort Utility again, select the AirPort Express and click Manual Setup
Click the Wireless tab
Settings should look like this:
Wireless Mode = Extend a wireless network
Wireless Network Name = Same name as the Time Capsule network
Check mark entered next to "Allow wireless clients"
Wireless Security = Same setting as the Time Capsule
Wireless Password = Same password as the Time Capsule network
Confirm Password
Update to save settings and close AirPort Utility
Locate the AirPort Express approximately half way between the Time Capsule and area that needs more wireless coverage. You may need to experiment on placement to find the best compomise.
Post back on your results. -
I want to add airport express. I now have time capsule and I am confuse. Do I setup the express and then time capsule to the express?
Setup the Express to wirelessly extend the Time Capsule, or vice versa depending on which one is already set up. Or you could use bridge mode which involves using an Ethernet cable or Powerline plugs.
-
My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Has v.6.3 on it. Supposedly up to date.What's the problem?
Has anyone had that happen? Solution? (other than purchase a new one.......)My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Has v.6.3 on it. Supposedly up to date.What's the problem?
Has anyone had that happen? Solution? (other than purchase a new one.......) -
How do I set up my Airport Express and not interrupt my TIme Capsule
I have ATT UVerse recently installed and have my Time Capsule Router Behind their installed router. I recently purchased Airport Extreme and want to install it as well so I can connect an older Version of a Sony PS3 which doesn't have bluetooth capability via rj45 since the time capsule is no where close to my PS3. Is there a way to install this Airport Express and not mess up the settings of the Time Capsule?
Hello hbwilli. Welcome to the Apple Discussions!
I recently purchased Airport Extreme and want to install it as well so I can connect an older Version of a Sony PS3 which doesn't have bluetooth capability via rj45 since the time capsule is no where close to my PS3. Is there a way to install this Airport Express and not mess up the settings of the Time Capsule?
Yes. You will want to configure the new 802.11n AirPort Express Base Station (AXn) as a ProxySTA. In this configuration, the AXn will join the wireless network created by the Time Capsule and share Internet access through its Ethernet port to the PS3.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility. The feature should work with any wireless network: a, b, g, or n; and 5GHz or 2.4GHz. (Note that the Express, which ships with firmware 7.3, must also be updated to firmware 7.3.1 for this feature to appear.) -
I have an Airport Express and the pass code I used some time ago for my IPad won't work for my new IPhone 5S?
If you are sure that you are entering the correct password, then this sounds like an iPhone issue, so your best bet will be to post in the iPhone Support Community so that the experts over there can help.
Using iPhone
The best that we can do here is suggest that you start with the iOS support document Troubleshooting Wi-Fi Networks and Connections.
Resetting the iPhone took care of an issue like this with my wife's iPhone.
http://support.apple.com/kb/TS1398 -
Should I buy airport express, extreme or time capsule? I have my new Mac Pro. 2 iPhones, 2 iPads , and grandchildren who come with their devices. I live in a two-level house.
A Time Capsule is an AirPort Extreme with a built in hard drive to allow your Mac(s) to back up automatically, so it's a logical choice if you need a wireless router and back up capabilities for your Macs
The AIrPort Extreme has a bit better antenna arrangement than an AirPort Express, so it would be a good choice for a two level house.
Depending on the location of the "main" wireless router, you may find that you still need to add an extender or two in other parts of the house for full, fast wireless coverage. The AirPort Express is a good choice for this duty.
To compare the 3 Apple devices, see this Apple support document:
Compare Apple Wi-Fi base stations AirPort Express AirPort Extreme Time Capsule -
Time Capsule, Airport Express and Xbox Live
Recently I went out and bought a Time Capsule 1TB hoping to extend my wireless network. I knew that Apple products wouldn't usually help extend a DLINK network so it came as no surprise when I could not extend my DLINK network. My solution was to buy a new Airport Express, disable the wifi on the DLINK router and extend the Airport Expresses network via the Time Capsule.
The current situation is: DLINK <-> Ethernet <-> Airport Express Wireless Time Capsule <-> Ethernet <-> Xbox360
The issue is the Time Capsule as far as I can see. For apparently no reason it will change from a solid green status light to a flashing amber status light. Signing my Xbox into Xbox Live seems to be a trigger, but the Time Capsule goes amber even when the Xbox isnt on at all. When it does change to flashing amber I am no longer able to detect it within Airport Utility and as such am unable to diagnose the issue. Any help would be appreciated.Here it works fine. I have a Time Capsule connected to my ADSL modem. I had to buy an all new Airport Express 802.11n, though, because my old AE could not extend my network.
On an all 802.11n setup you just check the "Allow this network to be extended" on the master (Time Capsule), and choose "Extend a wireless network" on the remotes.
The X-Box is connected with an Ethernet cable to the Airport Express, and connection to X-Box Live works fine.
Good luck! -
HT4437 can i play songs from my ipad to my airport express and Ihome speaker at the same time?
can i play songs from the ipad to both the airport express and ihome speaker at the same time?
Let's double-check your AX's settings...
To set up AirTunes on the AirPort Express Base Station (AX), using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
AirPort tab
- Base Station Name: <whatever you wish or use the default>
- Wireless Mode: Join an Existing Wireless Network (Wireless Client)
- Wireless Network: <select your Belkin wireless network>
Music tab
- Enable AirTunes on this base station (checked)
- Enable AirTunes over the Ethernet port (optional)
- iTunes Speaker Name: <whatever you wish>
- iTunes Speaker Password (optional)
In iTunes:
iTunes > Preferences... > Advanced > General
- Look for remote speakers connected with AirTunes (checked) -
Conflicts with Airport Express and Time Capsule
I am using Airport Express and Time Capsule at the same time. Connection to the web is via a router. Very often I do have conflicts. How shall I connect the gadgets? At the moment I connect the router to Airport Express (network cable).
Time machine back up doesn't work properly.
Is there anybody able to help me?
RegardsWhat broadband type do you have?
It can be impossible to plug a TC into the existing connection because the virgin media router has special setup or logins which are not revealed to end users.
If it is a fibre connection for instance the TC may simply not work. They have issues with many fibre ISP putting the gateway address outside the subnet of the main public IP.. (don't worry if it is too technical .. it amounts to .. it don't work! )
You may need to wait until Sat.
Get in a big supply of home videos or something and try and starve off your addiction.
Maybe you are looking for
-
Stock of a material as on given date
Hi all, Is there any function module or any BAPI to calculate the opening and closing stock of a material as on the given date, based on which a customizing report is to be developed.. There was a Transaction MB5B to know the as on date stock, bu
-
Photoshop cc 2014 keeps crashing on startup
Every time I try to open Photoshop it opens for a few seconds than an error comes up saying that Photoshop has stopped working with a "close program" button. From event viewer: Log Name: Application Source: Application Error Date:
-
How to open link in Safari from WebContent?
Hello, can I open standart web-links (<a href="http://www.google.com/">Google</a>) in external browser (Safari in my case) from WebContent overlay? Maybe I have to use target-parameter? What I need to place in it's value? Thanks a lot.
-
Hi Can anybody throw some light on what happens when a BPM Process is completed successfully? Does the process and its data get archived in file system? If so where to look for it and should we consider this for performance of the box? Thanks, KN.
-
Has anyone tried using FMS 3 and Xen in a medium to large production environment ? I know that FMS and virtualization is not officially supported, and that using VMware provides several performance decreases. But is that also relevant to Xen ? Xen su