2 airport expresses and clear hub--how to get network back?

I just got clear internet because centurylink more than doubled my rate.
I had the centurylink modem/router set in bridge mode... I need to know how to do this and how I can get my wifi network and printer through my two airport expresses again, but clear won't help me--I've just had 3 frustrating chat sessions (in one of which, they did not know their own equipment and didn't know there are two ethernet connections on the modem). They told me they won't help, and I have to go to apple but my expresses/computer are no longer under warantee (though my phone is).
Any ideas about what to do? I can't afford an expensive tech support call.

Do i need to set up my Expresses to 'Join' a wireless network, or 'extend' or both or neither.
Neither. Both of those features are used when you are wirelessly extending a network. Since the AirPort Express (AX) will be connecting via Ethernet, you do not use those.
All you need to do is configure the AX to create a wireless network and act as a bridge (not sharing a single IP address). If you use the same SSID (network name) and wireless encryption type/level/password as the Time Capsule, your devices will seamlessly roam between the two base stations. It will appear as one wireless network.

Similar Messages

Im on the 10.6.8 software and i recently deleted my mac app store and emptied trash and dont know how to get it back now.

Im on the 10.6.8 software and i recently deleted my mac app store and emptied trash and dont know how to get it back now.

Download and run the 10.6.8 combo update http://support.apple.com/kb/DL1399

So my computer crashed and i had lost all my itunes purchases and dont know how to get them back, so my computer crashed and i had lost all my itunes purchases and dont know how to get them back

so my computer crashed and i had lost all my itunes purchases and dont know how to get them back, so my computer crashed and i had lost all my itunes purchases and dont know how to get them back

You have a backup of your computer, or at the very least of your iTunes media, correct?
Simply copy your backup of your iTunes media into the iTunes library on your new computer.
Connecting and syncing your device to the new computer without first recovering your iTunes media is a really, really, really bad idea. iDevices are designed to ONLY sync with one computer. When you plug your device into a new computer, it will wipe all media on the device when it syncs. The only media you may be able to salvage and transfer to the new computer would be anything bought directly on the device.
If you do not have a backup of your iTunes media, then you will want to either look at a way (using software from a third party company) to either extract the media from you iDevice or your old computer (assuming the hard drive is not toast).

Airport Express and BT Homehub - how can I get it to work?

Hello, can someone help??
I have an Airport Express and a MacBook. My only use for my Airport Express is purely to play ITunes music through my stereo via my MacBook wirelessly. Therefore I only require my Airport Express to join my current network.
I recently changed my phone and broadband network provider from Talk Talk back to BT. My Airport Express worked fine when I was with Talk Talk, I was using a Belkin wireless router for my network connection which worked without any problems. When I got my Airport Express, it was easy to set up - it joined my Talk Talk network without a hitch.
When my connection transferred to BT last week, I tried to connect up my Airport Express to my new BT Homehub. However when I went into Airport Utility my AX wasn't there. So, I read the guide on the Apple Support site and reset it to factory settings. This then seemed to make it 'appear' in Airport Utility, so I went through the process of setting it up as I did when I first bought it. When I got through to the final stage when it is 'Updated successfully and is now re-starting', the AX icon seems to disappear from the left hand side of the box and eventually I get an error message stating 'Airport Utility was unable to find your Apple wireless device after reinstating: The settings for this apple device have been successfully updated but there was a problem re-joining the wireless network or finding the apple wireless device. You may need to select your network from the airport menu and try again' (Incidentally, this last piece of advice doesn't work)... So, I am not sure what to do. I have tried changing the format of the WEP code I need to enter by adding " in front of the code as well as $ as is the suggestion on the Apple Support site...
Is my AX faulty? Is my BT Homehub (The 'next generation of router' as BT call it) preventing my AX from joining my network?? If anyone can help I would appreciate it, I am not very clued up on these things.... :o)
Thanks

I have now managed to get AX working on my BT home hub. I took my second non-working unit back to Apple in Solihull and got them to test it in store. They agreed it wasn't working. They then tested another unit in store and that did work so I brought that home. It would be worth you doing the same as I got a 10% discount off my next purchase of anything at Apple for my troubles.
I set my homehub security to None (from WEP - in homehub manager/advanced/wireless/security), plugged in my AX to homehub using an ethernet cable, then ran Airport utility and after a couple of runs it finally picked it up. I was able to set the configurations I wanted and 24 hours later it is still working. I set my homehub security settings back to WEP as soon as the AX was configured.
I also installed airport utility on my son's windows laptop and that is now able to print wirelessly as well. So, finally a result.
I would suggest you take your unit back to where you bought it from and get them to test it. If they offer you another one ask for a Mac genius
to test it in store for you first. Also ask them to run through the installation procedure with you. Don't forget to ask for something for your troubles:)
Hope that helps,

I was told at the Apple store that I could simply plug in ( electric power) the Airport Express and it would find my wireless network. I hoped to use it as a way to play music from my iphone. I do not use other Apple routers etc,

The Airport Express is not finding my wireless network. I do not have any of the devices listed below. I have a Belkin wireless router. Can I still use Airport Express ( without plugging an ethernet cable into it) ? Any ideas for how to make it find my network ? It is sitting next to the wireless router-so is in range.
If you already have a wireless network in your home and want to extend its range, AirPort Express can help. Just place it in range of your primary base station — an AirPort Extreme, Time Capsule, or another AirPort Express — and near the area where you want your wireless connection. Launch the easy-to-use AirPort Utility app on your iOS device or Mac, and you’re mere minutes away from long-range Wi-Fi enjoyment.

Hi - you can do what you want to do with AirPlay from your iPhone - but unfortunately it is not as easy as the people in the Apple store told you - your first problem is that you have a non Apple router - you cannot extend a non Apple router wirelessly with the Express - you can only join the network and connect an ethernet device to it - you can however connect via ethernet and have it create a wireless network of its' own - you can set this up from your iPhone or the XP - but this is a complicated setup and would involve many different discussion areas of this forum - therefore I would suggest that you use your 90 days of support and consult directly with Apple to do this - go to this link - http://www.apple.com/support/contact/

I keep getting error 10053 when trying to update airport express and connecting to the existing wireless network. Please help.

can someone assist in setting up my airport express? Im not sure what the error message means...

Hello Jacquimae,
The only thing you can buy legitimately is the computer and the basic discs that are necessary to operate it. All Apple apps over and above this cannot be legally sold on. The machine should have been completely wiped and the original OS re-installed, bringing the machine to its original factory condition. iPhoto and Garage band were part of OS 10.6.8. Snow Leopard.
You must not use the original owner's ID.

Removed tap icons and dont know how to get them back

Hi all,
I just received my x220t and started playing with it. accidentally i removed few icons from simple tap menu (lenovo app store, lenovo music, lenovo video...).
Now i want to get them back. Any info would be appreciated on how to do it.
Cheers
Solved!
Go to Solution.

Lexxburn,
Please read here to see if it solves your problem also:
http://forums.lenovo.com/t5/Lenovo-SimpleTap-and-MultiTouch/Office-Tile/td-p/530243

I've lost my search bars and dont know how to get it back

i dont know how to get any of my toolbars back on safari, i have tried uninstalling it but that hasnt worked i have searched on the internet but cant find a solution, help please??

Search Safari for Windows community.
https://discussions.apple.com/thread/2307900?threadID=2307900

The Icon for the apps store and itunes disappeared from my iphone. was told to reset and clear all setting to get them back. After i download the information from my computer to the iphone. I lost 78 itune songs.

Had to reboot iphone, lost 78 itune songs on computer.

Downloading past purchases from the App Store, iBookstore, and iTunes Store
unfortunately, the music feature is currently available in the US only, so if you're located elsewhere, your only option would be to restore the missing files from the backup you surely have created?!

How do I install a new airport express and link a second airport express to extend the network of the first airport express?

I currently have a linksys wireless router attached to the Internet. I have an A1264 Airport Express connected by Ethernet to the linksys router. I have two network names, one for each wireless network.
I purchased a new A1392 Airport Express to replace the linksys router and join to the A1264 Airport Express, and I want to have one network name as a result.
How do I do this? I realize that I have to reconfigure the A1264 device so that it is an extension of the A1392 device.

You have a fairly complicated set up, so I suggest that it would make sense to tackle things in stages, testing each stage as you go, before proceding to the next stage.
Stage 1 would be setting up the A1392 first to the cable modem, and then making sure that everything is working correctly on the A1392 Express
Stage 2 would be adding the Netgear switch and testing each port with a laptop connected via Ethernet to make sure that everything is operational on the switch
Stage 3 would be connecting the A1264 Express and testing to make sure that it is extending the network correctly
Stage 4 would be adding other Ethernet devices to the Netgear switch and testing each one at a time before adding the next device. There is some question about whether an iOS device can print to an Ethernet connected printer....even if the printer is AirPrint compatible. You may need to connect the HP using wireless...not Ethernet....to gain full AirPrint functionality, or use another application that will allow printing like Printopia or Print Central using the Ethernet connection on the HP.
Stage 5 would be adding the printer to the A1264 AirPort Express.
You do not mention how the printer will connect to the A1264 Express, but I assume that it will be USB from your description. Most printers will work, but you really will not know if your printer will work until you try.
Remember that only printing will be supported at the USB port of the Express. If you have an all-in-one type device, scan, maintenance, and other advanced features will not be operational whent the device is connected to the AirPort Express.
If you want to print from an iOS device like an iPad or iPhone, plan to add additonal software like Printopia or Print Central to possibly allow this function. There are no guarantees here as far as the iOS devices.

Airport Express and WRT54G v8

Airport express firmware: v6.3
WRT54G: v8
I'm unable to get my Airport Express to join my existing wireless network in Client mode. I've been able to get it to join other wireless networks using WPA, but with my new WRT54G v8 I haven't succeeded;
- Has anyone got an Airport Express to join a WRT54G v8 wireless network?
- Does the Airport Express support WPA2 when joining a non-Apple 802.11g network? It just shows WPA on the drop-down box for me.
- Is the channel selection important?
- For WPA, I've previously had to enter a $ before my ASCII-format password. Is that true in general for WPA and WPA2?
Having owned this Airport Express for 4 yrs, I have to say I'm dismayed by the level of frustration I've had with it, but I'm locked into it because I used Itunes.

I have the exact same problem. I purchased the airport express yesterday, and trying to hook it up in client mode, wirelessly to the wrt54g to be a print server. I set it up with the ethernet patch cord attached to the airport express and the wrt54g. It gets set up great and I can print and attach my clients (2 windows and 1 mac) wirelessly to the wrt54g network. If I leave the ethernet connected within 5 minutes my wireless network slows to a crawl and then stops traffic. If I disconnect the ethernet cable instantly the network returns to normal speed. But the airport express is no longer reachable. Granted it doesn't have the same IP and has to re-establish connection. However, it never re-establishes and flashes amber. Seems like it has to be security related as it seems to connect OK when the ethernet cord is attached.
I assume that to set the airport express up in client mode that the first configuration has to be made with the ethernet cord attached. Then when it resets itself to re-read the new configuration that I am supposed to unhook the ethernet cord. As it should be talking to the wrt54g through the wireless connection rather then the hard ethernet connection.
The setup steps I go through are:
- push the hard reset to get to factory settings
- connect ethernet patch cord from airport express to wrt54g
- bring up airport utility on macbook pro
- airport is found and press continue
- create a password - continue
- select I have a network - continue
- select join the network wirelessly - continue
- select my network from wrt54g
- select security
--I have tried the 40bit with the wrt54g 64bit WEP
--I have tried 128bit WEP on both
---neither works...if I try something else I need details on how to set it up
- continue and wait for when it restarts....
- If I leave the ethernet cord in, and switch back to the wrt54g wireless network, the airport express shows up in the airport utility very quickly. and seems to work for a while before taking my wireless network down.
- If I remove the ethernet cord and switch the macbook over to the wrt54g wireless network, the airport express never shows up in the airport utility and the airport express flashes amber. From the manual, this says there is connectivity issues. And through process of elimination, looks like the airport express can't get passed the security with the wrt54g.
So, I too, look for assistance.
PS. I have had the wrt54g for a couple of years and have not upgraded firmware so if that is necessary then I can do that.
PSS. At the very first airport express setup there was a new firmware loaded. Does this have to be re-applied if the airport express is hard reset (ie, paper clip in the reset hole for 10 seconds)?

I have managed to change my language from english to chinese and i dont no how to get it back

i have changed my launguage on my ipod nano by accident from english to chinese and dont no how to get it back to english

Hello Katbellrob24,
See this Apple support document.
iPod: Changing the display language
B-rock

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either.

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either. I have an iphone 4 that will not connect to 5ghz.
thank you!

Your AirPort Express is already providing two separate 2.4 GHz and 5 GHz bands, but each band is using the same wireless network name.
This is the default setup for the AirPort Express, which is recommended for most users. The theory here is that devices will automatically connect to the best quality signal based on their capabilities and distance in relation to the AirPort Express.
It is possible to assign a different name to the 5 GHz band, and then "point" devices at that network to connect. Some users swear by this option.....(I am not one of them).... but you might want to give it a try to see how it works for you.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Express
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window
Click Wireless Options near the bottom of the next window
Enter a check mark next to 5 GHz Name.....which will automatically add "5 GHz" to the network name....so you can identify it
Click Save, then click Update and wait a full minute for the Express to restart
Now you will need to "point" your 5 GHz capable devices at the 5 GHz network name. 2.4 GHz devices will connect to your "other" network name.

I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work?

I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work? And one more thing about the setup, the linksys router shich acts as a base is in a different room as the airport express which i wanted to use for airplay. So I'm hoping to hook up the Airport express via wireless signal. If i can set it up, can someone pls help me out by posting detailed instructions. Thanks so much!

The first message that AirPort Utility will display during the auto setup will be that the Express will be confgured to "extend" the network. When AirPort Utility analyzes the network further, and sees that the Express cannot "extend" the 3rd party network, the next message will indicate that the Express is being configured to "join" the wireless network.
Once the Express is configured, if you later go into AirPort Utility to check the settings under the Wireless tab, you will see that the Wireless Mode is indeed "Join a wireless network".

How to extend wireless with airport express and time capsule

So, I have a time capsule & because of the thick walls in my apartment, I can barely use my ipad and iphone at night in my bedroom! (my macbookPRO stays at 3 bars however!)
I bought an airport express thinking I could plug it closer to or inside my bedroom to boost the signal - but it doesn't seem to work that way - any tips on how to set this up?
TWO ADDITIONAL Qs:
Does connecting directly to my time capsule (which i'm assuming i'd need another ethernet cable) help with the boost? (then negates the other great uses for the airport express it seems)
Isn't there a way to do the boost with the express wirelessly? I'd really love to get wireless speakers, use airplay AND be able to use my devices just two rooms away .... HELP!
thanks so much (when did apple phone support start to be closed on Sundays?)
cheers.

Suggest that you check your setup again to make sure that the settings are correct on both the Time Capsule and AirPort Express.
Open AirPort Utility, select the Time Capsule and click Manual Setup
Click the Wireless tab below the row of icons
Make sure that a check mark is entered next to "Allow this network to be extended".( If the box is not checked, the Time Capsule will not extend to the AirPort Express)
Click Update to save your settings and close AirPort Utility
Next, open AirPort Utility again, select the AirPort Express and click Manual Setup
Click the Wireless tab
Settings should look like this:
Wireless Mode = Extend a wireless network
Wireless Network Name = Same name as the Time Capsule network
Check mark entered next to "Allow wireless clients"
Wireless Security = Same setting as the Time Capsule
Wireless Password = Same password as the Time Capsule network
Confirm Password
Update to save settings and close AirPort Utility
Locate the AirPort Express approximately half way between the Time Capsule and area that needs more wireless coverage. You may need to experiment on placement to find the best compomise.
Post back on your results.

2 airport expresses and clear hub--how to get network back?

Similar Messages

Maybe you are looking for