2 AnyConnect queries backup server and not connecting.

We are in the process of swapping over from the old IPSEC VPN client to AnyConnect for remote users.
A couple of questions,
1) With the IPSEC VPN client you could configure a Backup server. with AnyConnect there is not an option for this as far as I can see. Is there an option for this anywhere?
2) Sometimes AnyConnect will not connect, I have found the way round this is to access an Internet website first, once that comes up then AnyConnect will come up ok. Is there something I can do about this such as timeout,script a website location to try first within Any Connect?

Hi,
You can add multiple backup servers by editing the profile xml file or by using the Anyconnet profile editor.
What version of the Anyconnect client are you using? How do you connect to the Internet? Are you connecting via a proxy?
Thanks
John

Similar Messages

  • Taking too much time and not connecting to ipad software server

    taking too much time and not connecting to ipad software server and not updating.. why

    because everyone is doing the same thing you are... be patient, and you will get the update... I had to grab the update over 3G (it won't let you download or install, but it got me in the door) and then switch back to wifi and download and install.

  • CF Builder and not connect to the loacl CF server

    I am running CF 9 on my laptop as well as CF Builder, and at home it works fine.  But at work, where i hook to the internet with a proxy Builder and not connect to my CF server.  What gives??  Please help
    Thanks

    Hello Francesc,
    check the connection details in global.srvc. If you are using a message server, the corresponding port
    sapms<SysID>
    has to be maintained in ...\drivers\etc\services, too.
    If that does not help: What do the trace files say?
    Regards,
    Jan

  • How can you get your ipod touch open when you forgot the password and its disabled and not connected to wifi

    How can you get your iPod touch open when you forgot the password and its disabled and not connected to the Internet Connection and you don't want to reset it.

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • Windows Media Player no sound while playing a avi file in server and client connection using TCP/IP connection

    Hello there
    I have a problem with my windows media player while using server and client connection by using TCP/IP connection. So when I play a video using Windows Media Player in LabVIew there isn't any sound come out but when I'm playing a video by a Windows Media Player only the sound will come out. Can you help me solve this problem?
    I also upload the vi as the reference.
    The username for the client is ihsanhaikalz and the password is ganteng
    Thanks
    Attachments:
    Client Remote.vi ‏746 KB
    Server Remote.vi ‏1433 KB

    Hi ican,
    I was looking at your VI's but I cannot seem to pinpoint exactly where you are using Windows Media Player.  In order to more quickly assist you, could you please recreate this issue more concisely in a smaller set of VIs.  Also, were you able to get sound when you did not use the TCP/IP connection and simply played the files in LabVIEW?
    I noticed in a few places that you were using the Play Sound File.VI from the Graphics and Sounds palette.  Is that what you are refering to?  I noticed there that the file path that you have designated for the song is simply the song title.  Instead, this should be a path to where the song is located on your computer.
    Also, if you are planning on using Windows Media Player, have you considered using the ActiveX commands for Windows Media Player?  Here are a few examples if you are unfamiliar with this functionality.
    Example 1 and Example 2.
    I hope this helps!
    Kim W.
    Applications Engineer
    National Instruments

  • Dispatcher is running server is not connected

    hi,
    we have installed ECC 6.0 version with abap stack first
    afterwards i have installed java stack separately
    after installation
    all the three  message server, dispatcher and IWS watchdog are up i.e (green in color)
    but when i give the url parameter i.e Http:// .......
    it's giving the error  Dispatcher is running server is not connected
    Searched in forums we have found that ,to the  increase the heap size .
    we have increased heap size and restarted the server
    Again i am getting the  same error  when typed in browser

    Hi Shravan,
    can you please check the status of the Java Server & Dispatcher process by using jcmon, they should status "running".
    Let me know if this is helpful and if you need some more details.
    Regards
    Prashanth

  • I am getting a message saying that I cannot get email because the server will not connect - although it does. It also claims that it was last backed up on Friday last. What h

    I changed my server at the end of May &amp; all worked well until the past week end since when I am getting a message saying that I cannot get email because the server will not connect - although it does. It also claims that it was last backed up on Friday last despite having had several emails since Friday. What has happened &amp; can I get email back to normal?

    Hello Stern snapper
    If you are having issues with receiving email on your iPad, then check out the article below to troubleshoot the issue. You may just need to remove the email account and add it back in.
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Regards,
    -Norm G.

  • Solaris 9 server is not connecting to the network

    hi,
    we are working on a Sun Spark v240 ,Solaris 9 sever.
    there was a ip clash between the server and other machine in the network.
    Since then our server is not connecting to the network.
    We disabled the ip on the other machine.
    But still the problem persisits.
    When we do trace route we are not getting any info.
    It doenot even ping the default gateway.
    please help

    1, Could you provide some network layout info, eg: The network or subnet(provide subnet mask if using a subnet) address, The servers address, each other machines address.
    2, Make sure you haven't disabled your hme?(ether) devices.
    3, i know this is an old post, if you fixed the problem please reply your solution as it may help others troubleshoot similar problems.

  • IPhone 4s keeps freezing and not connecting to wifi. Keeps turning it off?

    IPhone 4s keeps freezing and not connecting to wifi. Been like this for last 6 months.. Am real fed up with it.. Have reset, tried turning off but still not connecting.. Any suggestions gratefully received.

    Does "have reset" mean that you restored the phone to factory settings? If not, you might want to give that a try. You will want to backup first so that you can restore your data from the backup after you restore the iOS software.
    This will erase the phone and also download and install the most recent iOS version available for your device.
    Use iTunes to restore your iOS device to factory settings

  • Escrow the recovery key in DB server and not in AD when removable drive is encrypted.

    Is there any way to escrow the recovery key in the database server and not in AD when removable drive (USB drive) is encrypted via manage-bde command line? The data recovery agent is not enabled in our organization. 
    "Choose how bitlocker protected removable Drives can be recovered" for removable drives is disabled in our Group policy also.
    Please advise. Thank you.

    As far as I am concerned, you cannot do that when you are using the command line "Manage-bde".
    The reason is because, the manage-bde command line parameters doesn't support saving recovery keys to databases. Also there is not any group policy defined for it.
    I you want an option to save recovery keys in a database rather than the AD, I would recommend to use MBAM (Microsoft Bitlocker Administration and Monitoring).
    Gaurav Ranjan

  • My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

    My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

    I'm afraid you'll have to get the phone serviced, dropping the phone must have damaged additional parts inside the phone.
    But Apple will not service the phone anymore, opening the phone and replacing the battery should only be done by authorized personal, not by users.
    You'll have to look for a 3rd party repair shop and see if they can fix this, sorry.

  • TS1363 my ipad is disabled its not showing key pad and not connecting with itunes need help

    ipad is disabled and not connecting with itunes

    1: Connect the device to your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.

  • TS2734 I left my iPod at a friends house. She doesnt have internet. So its not connencted to the internet. And i had never charged it so its been dead for about a week. Can I use iCloud while its turned off and not connected? Please help me!! I need to fi

    I left my ipod touch at a friends house. She doesnt have internet. So it's not connected to the internet. And I had never charged it so it's been dead for about a week now. Can I use iCloud while it's turned off and not connected? Like, will it show a message and ring if it's not connected to the internet and turned on? Please help me ): I really need to find it!!!

    " Can I use iCloud while it's turned off and not connected? "
    No.
    "Like, will it show a message and ring if it's not connected to the internet and turned on?"
    No.
    There is nothing you can do other than look for it,

  • Can't connect to Yahoo! calendar.When trying to connect Mail, Contacts, Messages and Notes connect but Calendar and Reminders don't connect. I get error  A secure connection couldn't be established.

    Can't connect to Yahoo! calendar.
    When trying to connect Mail, Contacts, Messages and Notes connect but Calendar and Reminders don't connect.
    I get error  A secure connection couldn’t be established.
    I think a lot of people are getting this. Some solutions with Gmail but v little with Yahoo!
    Any answers?
    drlounger.
    Yosemite
    Retina macbook pro 2012

    Dear Al
    Thanks for your reply.
    I have just found out what's wrong. I went to the 'more info' section of my Chitchat application and it took me to a link where it explained that Yahoo Chat has ditched chatting with the Java protocol and chatters can now only chat via the Yahoo Messenger protocol, which is Yahoo Instant Messenger with Voice. Unfortunately Yahoo doesn't provide a platform for Yahoo Voice for Macintosh computers. Though the original link I went to provides another link to a thing called 'Adium' from which a Mac can access Yahoo Chat's new protocol, although it's not fully developed yet.
    Oh...and thanks so much for letting me know about the Java update release. I did not know that I have to upgrade my system first to recieve the latest update information.
    Regards
    Tina

  • HT5781 why does my iPhone 4 ping constantly and not connect to my macbook air

    why does my iPhone 4 ping constantly and not connect to my macbook air in itunes

    Hi, pinkshaz. 
    You may find this article helpful when troubleshooting iTunes not recognizing your iPhone.  If you have any security software, disable this software and test the results.
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    Cheers,
    Jason H.

Maybe you are looking for