2 ATV in same house? Any issues

Hi,
I have a ATV in the family room and love it! So much so I want to install one in the garage to look at pictures and listen to my music.
Any issues with two ATV's on the same network?
Thanks

I have 3 running currently hosted by the same ITUNES server. When I talked with the Mothership tech support they said there was no limit that they knew of and had 14 currently running off one ITUNES host.

Similar Messages

Running Production Premium CS5 & CS6 on the same system / any issues ?

Still not sure which way to go with the CS6 upgrade, non-Creative cloud version..
Run both on the same system or uninstall CS5 first..
Prefer not to slow down the system but CS5 is running perfectly now..
Anyone tried both at the same time ?
How is opening existing CS5 projects with CS6, this is a concern for me & why I might like to have both installed on the same system ?

Having installed CS5, CS5.5, CS6 and CC is no problem. They are separate installs.
Moving projects from CS5 --> CS5.5 --> CS6 --> CC is no problem.
Moving projects from CC --> CS6 is not possible.
Moving projects from CS6 --> CS5.5 can be problematic.

Can I have two apple TV boxes in the same home / wifi area, ar there any issues i should be aware of?

can I have two apple TV boxes in the same home / wifi area, are there any issues i should be aware of?

I was in a hotel a few month a ago. The hotel also had a portal page you have to sign in. Of course the ATV didn't a web browser and could not sign in to the portal and connect to the Internet, so your iTunes didn't work. (But your ATV should be connected to the router at that point already, just the portal won't open the port to pass through your ATV's traffic)
So what I did was to use AirVideo app on my iPad and AirVideo server on my Mac. Selected the movie on my iPad using the AirVideo app and then selected my AirPlay device on my iPad to AppleTV. Because this setup didn't require iTunes, so there was no need for a live Internet connection, and just a connection to the hotel router was enough. It was very easy.
(Of course, you can subsititude the iPad with an iPhone here too)

I can send tv shows from my ipad to my apple tv without any issues. Why cant i do the same with a movie rental?

I can send tv shows from my ipad to my apple tv without any issues. Why cant i do the same with a movie rental? Or how do i do the same with a movie rental?

Personally I think the iOS devices are poor at reconnecting - Airplay establishes that a link is available but when the iPhone/iPad has been away from the house and rejoins the network i think AppleTV already thinks it's connected with a different IP address and fails to recognise it has joined the network again with new credentials.
Something along those lines anyway.
I find that a combination of restarting AppleTV, router and iOS device tends to fix it, but not for everyone.
AC

My new IPad 3 cannot connect to WIFI even it has a full bar of the reception. In the same location, my PC and my smart phone get a full bar connection without any issues. How can I do to fix the issues (can I switch to IPad 2)?

My new Ipad 3 cannot connect to WIFI even it has a full bar of reception. In the same location, my Windows 7 PC and Andorid Smart phone can connect to the same WIFI without any issues. How can I fix it? Without WIFI, the WIFI only IPAD is nearly useless. If it cannot be fixed, can I get a replacement for IPad 2?

Take it to an Apple Store for evaluation. If defective, you'll get a replacement.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

PROBLE WHILE RENDERING IN CC While as In CS renders without any issue the same file from same location but tried 3 CC ,machine and have the same issue.

Please i need an Urgent Help
I just installed for my users 5 Machines with Adobe CC and they are all crashing while rendering to QT H264.
while in cs6 it renders the same file in the same location without any issue.
Please help it is urgent.
Regards

Hi,
I can't really read the error appearing in the screenshot you shared. Is the application fully up to date?
Have you read: After Effects CC 2014 - removal of H.264, MPEG-2, WMV, FLV, F4V, and SWF exporters - WHY !?
This might also be an explanation, as i believe you are trying to use h.264 right?
Kind Regards,
Harrie

Can two apple TV's in the same house share one itunes library?

Can two apple TV's in the same house share one itunes library and play different movies at the same time?

I have two ATV G2 and one ATV G1 at home with the same iTunes library. I have played two different movies in the ATVs. One interesting thing you get is that you can start one movie and pause it and then you can continue playing it in the other ATV. The iTunes controls where you pause or stop the movie.
Agree that bandwidth is the limit here and probably the server throughput. But, so far I haven't experienced any problem.

Screen Sharing in Same House

I have several Macs in the same house. When in my office in the basement my wife often calls with something she doesn't know how to do so I thought screen sharing would be perfect, except we have been unable to get screen sharing to work amongst any of our computers in the same house.
We have different AIM screen names and have plenty of internet speed (12Mbs).
Is there a setting somewhere I need to change?

Hi,
Why not use Bonjour ?
This would not need to go over the internet then and is more likely to avoid Port Issues.
The iChat Screen Sharing uses a undisclosed Random port with an Audio chat that goes with it.
If you can Video chat or Audio Only chat using your AIM names then it is not the Audio/Video port that is the issue.
To allow the Random port for the Screen Share it is best to use UPnP to allow ports in your Modem or router.
9:24 PM Tuesday; July 28, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Why my iphone 4 connect to wifi, but when i open safari and search something it say i not connect.. but in the same house my sister using iphone4 too but she can online with the same router

why my iphone 4 connect to wifi, but when i open safari and search something it say i not connect.. but in the same house my sister using iphone4 too but she can online with the same router. i go and check over the detail of the network i connected, over the ip address and subnet mask have the numbers, but over the DNS and router don't have any number...isit the problem???? i can online at any other place but just my home cant...y????

Hey confuddled_chica!
Try the steps in the article below to troubleshoot this issue:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

The first boot of iphone 5 is not possible due to lack of battery charge , it happened after charging, is there s any issue of battery life

the first boot of iphone 5 is not possible due to lack of battery charge , it happened after charging, is there s any issue of battery life

Charge the phone for 15 minutes with the Apple charger. Then hold the HOME and SLEEP buttons at the same time until an Apple logo appears.

Any Issues with X250 and Using 3 Monitors?

With input from this forum, I went ahead and ordered an X250. ETA first week of April. Thank you... (ask me in May if I am still as grateful )
My plan is to also purchase an Ultra dock and use the screen on the notebook as well as two external displays. I did some research and understand certain video ports take priority over others, but this should no be an issue.
After reading another thread (here) I am concerned this setup may not be as reliable as one would hope. I realize the thread references an X240 (not an X250), but would like to know if others have a 3 display setup with the X250 and if they enountered any issues?
Thanks again. This group has provided a wealth of information that has essentially kept me in the Lenovo camp. I currently use a W520 and was pretty close to moving another manufacturer altogether.
Solved!
Go to Solution.

Hi Technobob,
I'm using a ThinkPad X240 daily on a ThankPad Ultra Dock with two 1920x1080 DisplayPort monitors simultaneously with the X240 LCD. Also have an X250 which occasionally gets plugged in to the same dock and all three monitors work, no issues.
Hope this helps!
I don't work for Lenovo. I'm a crazy volunteer!

I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues. I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion.

I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues.
I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
Is there anyone who can give me some pointers ?

Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
Good luck!

I have 2 sons that were sharing one account and now I want to separate them, will I run into any issues ?

I have twin sons and my wife sharing one itunes account and now from what a relative told me I should split them up since face time from my sons itouch is showing up on my wife's iphone ... so I started a new itunes account for all 3 of them, and now I want to sync each of their devices with their own accounts, before they had all the same music, etc... will I run into any issues when syncing each of their devices... meaning will I see a message like "this device is synced with another account and then it will say if I proceed it will erase what is on the device" ... ?? will I see this or will it just sync as normal
Thanks

You can't merge accounts or transfer iTunes purchases from one Apple ID to another: but there is no problem about using two IDs.
Use your iCloud ID for iCloud for syncing email, contacts, calendars, bookmarks, and PhotoStream.
Use your other Apple ID as before for iTunes, iTunes in the Cloud and iTunes Match.
There's no conflict about doing this, and you won't even notice as Keychain will log you in with the correct ID in each case. It's also better security not to have your iTunes login also your email address, given the number of complaints about hacked iTunes accounts.

The MAC signature found in the HTTP request '***' is not the same as any computed signature. Server used following string to sign: 'POST

Hi,
When trying with Postman sending a REST call to Azure Storage Queues I get:
The MAC signature found in the HTTP request '***' is not the same as any computed signature. Server used following string to sign: 'POST.
The code I have for creating the Authorization Header:
var accountName = "my_account";
string key = ConfigurationManager.AppSettings["my_access_key"];
DateTime dt = DateTime.Now;
string formattedDate = String.Format("{0:r}", dt);
var canonicalizedHeaders = "x-ms-date:" + formattedDate + "\n" + "x-ms-version:2009-09-19" + "\n" ;
var canonicalizedResource = "/my_account/myqueue/messages";
var stringToSign = String.Format("POST,\n\n\n\n\n\n\n\n\n\n\n{0}{1}", canonicalizedHeaders, canonicalizedResource);
stringToSign = HttpUtility.UrlEncode(stringToSign);
HMACSHA256 hmac = new HMACSHA256(Encoding.UTF8.GetBytes(key));
var signature = Convert.ToBase64String(hmac.ComputeHash(Encoding.UTF8.GetBytes(stringToSign)));
var authorizationHeader = String.Format(CultureInfo.InvariantCulture, "SharedKey {0}:{1}", accountName, signature);
return authorizationHeader;
Anyone any idea what I'm missing/doing wrong?
Additional question: do i have to create for every message I want to send a new Authorization header? Or is there an option (as with Service Bus Topics) to create a header that can be used for a certain timeframe?
Thanks.

One issue is with this line of code:
HMACSHA256 hmac = new HMACSHA256(Encoding.UTF8.GetBytes(key));
Please use the following:
HMACSHA256 hmac = new HMACSHA256(Convert.FromBase64String(key));
and that should take care of the problem.
Regarding your question, "do i have to create for every message I want to send a new Authorization header? Or is there an option (as with Service Bus Topics) to create a header that can be used for a certain timeframe?"
With your current approach, the answer is yes. What you can do is create a Shared Access Signature on the queue which will be valid for certain duration and then use that for posting messages to a queue using simple HttpWebRequest/HttpWebResponse.
Hope this helps.

My photos are not printing right with adobe manages color but works when i use printer manages color. never had any issues untill a week ago.

my photos are not printing right with adobe manages color but works when i use printer manages color. never had any issues untill a week ago.

We use CS6, yes we calibrate using x-rite. I have always had adobe manage colors when printing. This problem just occurred, all my settings are the same as they have been for years. The only thing we did lately is do an update to CS6. We thought it might be our printer but when we use the printer manages color it works fine, The problem with adobe manages color is it is not blending the light highlights like on top of the cheeks with the colors around the cheeks and its putting a faint red between the two it just does not have a smooth transition. I printed a photo that I had printed 4 months ago with no issue, and this time it had the issue that I am dealing with now. Somehow the photo shop manages color is not getting the right info to my printer.
I set paper type
set quality
no color adjustment
set my profile
Teri

2 ATV in same house? Any issues

Similar Messages

Maybe you are looking for